I just bought a Dell port replicator dock used one - model PRX01X
I'm having problem with mouse connected to this dock using USB. Previously mouse was connected to laptop, now is connected to replicator dock.
I'm feeling that mouse is not working properly, my move is not smooth like before. It caused by replicator dock
Is there any patch/software fixing that issue?
PS: I'm using 90W power adapter.
Im starting a thread b/c many people seem to be experiencing some issues with their Latitude while docked.
Some of my problems (keep in mind I use TWO external displays):
1) Most prevalent is my fan issue. This might only apply to nVidia GPU users. It appears that two things are happening: a) the dock simply does not allow for proper heat dissipation.
This for me is a fact as my laptop runs both cooler and, utlizes much lower fan speeds while undocked. b) DELL may have set the fans to kick in at lower temps particularly with the nvidia gpu
I just got done swapping the motherboard of a totaly dead D630 laptop, and to my amazement, the new motherboard dell sent me has a bad dock port!
I double checked to make sure I connected everything up right.
Has anyone else seen this? It's very fustrating. I have seen this before with a couple D620 motherboards
It seems that since I updated to Vista and to Window 7 subsequently I can't get the audio to work out of my dock. It works fine out of the side of my laptop.
Any ideas on this? I wouldn't think it is a driver issue as sound does work.
Is there any port replicator from dell available for dell xps 16. If not does anybody knows about any other thrid party port replicator which is compatible with Dell XPS 16 ...
View 4 Replies View RelatedThere are apparently 2 models of the E Port Plus Replicators; model YP021 and model YP126. Does anybody know what the difference between the 2 are besides the prices (the YP126 is much more expensive)? Are they both compatible with all E Series Latitudes?
View 10 Replies View RelatedI just purchased an E-6500 and am considering buying a port replicator that i can use to hook up my external hard drive, monitor, keyboard, mouse, and printer.
I am looking for the cheapest replicator that takes up the least amount of space since space is limited right now. I have a few questions:
1) I can't figure out from Dell's website which port replicator meets my needs. Can anyone point me to the right model that is the best bang for my buck,
meeting basic needs mentioned above (a generic option is fine too--doesn't have to be Dell as long as it works)
Can I get by using a 90w power adapter with the port replicator or do I need the 130w one?
View 3 Replies View RelatedI recently got a dell M4400 and large external dell monitor. I purchased the e-port replicator. I should be able to dock my laptop and use an external monitor and keyboard/mouse.
I can do that, but when I shut my laptop, the whole thing shuts down. Is this correct? I know I've used docking stations in the past and didn't have to have the laptop open. If I do, what is the point of the docking station?
The E-Port replicator had pretty much no documentation. Also, when I dock my laptop, shouldn't it see the docking station?
I was wondering if anyone had any experience with the E-View stand and/or port replicator.
I use my E6500 with an external monitor in an extended desktop and would like a hot dock/undockable setup, and the stand and replicator sound like they would work well for this purpose.
I have a Dell M4400 with nVidia 770 and I also have a Dell 3007WFP which supports 2560x1600 native resolution. Does anyone know if the M4400 will support this resolution if I dock it to an E-Port Replicator and use the DVI output of the docking station to the 3007WFP? When I looked at the Dell manual for the E-Port Replicator (and also the Plus) it didn't say if the DVI output supports dual-link.
View 10 Replies View RelatedAt work I use M4400 that is docked to E-Port Plus replicator. If I start the laptop while docked, everything works great.
When I undock the laptop (while still running) everything is still fine. Although sometimes the laptop lid need to be opened and closed twice for the display output to show up on the laptop screen.
The real problem occurs when I redock the laptop (while still running) to the E-Port Plus replicator. Most of the time, the display output does not transfer to my external monitor (22" Dell monitor). The laptop appears to be locked up, and I need to reboot the computer
I receive there is 1 weeks ago a M6800 laptop with his port replicator. When the laptop is plugged to the port replicator and I press the power button (on the laptop or on the port replicator) the laptop starts but it is frozen immediatly and the big "DELL" logo is displayed. I do not see Windows starts screen and I can not enter in the BIOS.
If I unplugged the laptop from the replicator station, it starts immediately and it is work.
If I plug the power charge on the laptop it starts immediately and it is work.
I plug the laptop to the port replicator, I starts it, the starts process is frozen of course at the "DELL" logo. After that I unplugged the laptop (I do not shutdown it, so the laptop is still on), the laptop continue to starts until Windows. After that I plug the laptop to the port replicator and it is work...
So I think the problem come with the port replicator detection at the BIOS level...
Wondering if they came up with anything new for these fan issues or if there are even drivers for a replicator...
View 10 Replies View RelatedOne of my users brought me this issue the other day. He is using a Latitude D830 laptop with a D/port docking station. With or without the laptop docked, The power button on the docking station flashes Orange and Green when powered. I've swapped power bricks for the dock. The laptop still seems to charge while being docked. After swapping the dock, the new dock is fine.
What might be causing it? Is the dock dead? Could it be a failed port on the docking station?
What port replicator/docking station with support of atleast 2 monitors works with the new Yoga 3 Pro?
View 3 Replies View RelatedDoes anyone know if there is a way to get the Dell Dock to work o a laptop made by another manufacturer?
View 5 Replies View RelatedI was wondering if someone could provide some guidance with regard to which docks work with the XPS1710. When I look at the Dell retail site.........................................
View 3 Replies View RelatedI just bought 3007WFP last night, and was wondering if it's worth it to use the dock station?
I'm using Vista.
What do we know about the e series dock connection? Are the devices on the dock (like a separate audio or USB or network controller on the dock) or is it just a passthrough? Are there any PCI-E lanes going through that connection?
View 4 Replies View RelatedAm trying to add short cuts to the dock, which it says, highlight and drag onto the dock. when i drag it onto the dock thou, it doesnt work, the little red circle with line throu it comes up.
View 10 Replies View RelatedWe currently have many Latitude D830s with the D/Dock stations on lease. When the lease runs out on these, I'd like to get some M6400s.
Are there any similar docking stations available? We currently drive 3 external LCD monitors plus use the lid on each, but 1900x1200 on a 15.4" screen is starting to affect my eyes as I feel the effects of age.
The only docks I've found so far are the port replicators and it looks like you can't use the lid with two monitors. We'd be willing to sacrifice one monitor, but not two. We also don't want to switch to desktops due to frequent travel?
i have bought the Notebook six months back Dell Inspiron 1525 Windows Vista 32 bit..
the DellDock is working fine before.. but the problem is one month back raising that Dell Dock has stopped working do u want to clost the program or debug the program..
i have tried to uninstall and instal from the dell url i have downloaded the SW(Dell Dock
My m1710 is plugged into a D/Dock (the larger one with a PCI slot) which has it's own power cable. If I plug my Microsoft Sidewinder keyboard and mouse into the USB ports on the dock, they will just power off seemingly at random and for random lengths of time, then come back on and work fine.
If I plug them straight into the laptop, they work fine. My first thought was that my dock was broken, but I borrowed my dock from work which has had a USB mouse plugged into it for years and tried it, and it does the exact same thing.
I took Vista off about two months ago and would love to put it back on but Dell still has not updated their video card drivers and I am told thats what has to happen to make Vista compatible with Dells D/Dock. Does anyone have the D/Dock working with Vista or have any goo ideas how I could get he D/Dock to work with Vista?
View 15 Replies View RelatedI have trouble with DELL DOCK, sometimes I get a window telling me that there were problems with the option to send the error to the DELL and the option RESTART the DELL DOCK.
View 3 Replies View RelatedA friend of mine just purchased a Dell Studio 15 and I realized the Dell Dock on it would be a useful app for my XPS M1530 as well.
However, I've been reading past posts and articles saying that the Dell Dock has bugs and is not as stable as other freely available ones like Objectdock, Rocketdock, and Stardock.
Thinking about getting one to go with my m4500 which is on order. Reviews seem ok though some complain it's bulky and other complained the release mechanism wasn't great. Worst was that someone said their comp wouldn't boot when docked.
Can anyone share experience and/or high res pics of what one looks like?
I was looking to buy a 5.1 speaker system (logitech z-5300e) and was wondering if this soundcard is compatible/install-able in the M90 D/Dock PCI slot.
Model is:
[url]
Anyone else experience issues with the display port on the e series dock?
I've got a E6400, E4300 and E4200 that I'm using with a E Port replicator.
I'm connecting it to a dell ultrasharp U2410 monitor via display port.
Several times a day, the monitor will go blank and say there is no signal, then 10 seconds later turn back on.
Several more times a day the monitor will go into standby and say there is no signal, the only way to get it back on is to open up the laptop and press FN F8 several times to switch the outputs, and sometimes that will work, other times it won't. in that case I have to either reboot the computer, or go into the intel graphics settings, tell it to use single monitor, and use the dell digital u2410.
I've called dell support, they are useless. I've updated the video drivers, I've reloaded the computer, I've tried 3 computers (but on the same dock since I only have one docking station).