Dell :: Harsh Display On XPS M1330
Dec 30, 2009
I have a bunch of XPS m1330s in an office here, and I've noticed that some of them have a very harsh looking display. The colors seem washed out, too blue, and also very bright. The screen is hard to look at.
I've tried making some adjustments in the nVidia control panel, but none of the sliders seem to adjust whatever is causing this. If there was a "color temperature" selection,
I think that would do it, but I have not found that anywhere.
View 4 Replies
ADVERTISEMENT
Apr 4, 2010
Well I have the same problem again. I was usign the PC normally and then it turn off the display, still the computer is still running like normal (I know because sounds).
I dont think that this is GPU problems (NO vertical lines, no crash, no weird colors) in a old thread people says to me that this can be that the LCD is damaged.
so i will buy the HDMI cable and if this happend again I will connect the PC to a
Maybe this can be a program? OS problem? a virus?..
View 10 Replies
View Related
Feb 5, 2009
With the power cable plugged in the display is Very bright. As soon as it is on Battery power the display gets dark almost too dark.
In power options I have the display turned up all the way while on Battery.
Is this a normal m1330 thing for the display to do?
I have the wxga with led back lcd screen.
View 9 Replies
View Related
Dec 31, 2014
I've dell Inspiron N5110 and I'm using it since past 3 and half years. In 2013, base of the laptop was broken and I had to replace it with a new one though there was no problem in hardware at all. Soon after the dell representative installed the new base and left my house I was facing a weird problem. When I power on the laptop, my screen gives a mild flash but does not start (6 out of 10 times, not always), but I can hear windows start up sound in the back ground. I use to press power button again to lock or stand by the laptop and then move my mouse. After performing this I can see the screen glows and log on screen shows up.
I was using my laptop like this for past 1.5 years as pressing a power button was no big deal. Today on the eve of new year, I saw my trick does not work any more. I was not able to start my screen even after repetitive attempts. But I remember I used it last night, display was really fine.
View 1 Replies
View Related
May 14, 2014
I should like to connect my old hp2710p to TV via HDMI. So I connect the displayport of the docking with an hdmi adpater but it doesn't work.
If I connect my hp2760p, everything goes.
The 2710p has w7 32bit, last version o BIOS and drivers.
View 2 Replies
View Related
Apr 14, 2014
I've purchased a HP Pavilion 15-n011tu Notebook. I'm unable to install display driver for WIndows 8 (64bit). I've tried all 3 drivers given on HP site.
1.NVIDIA Graphics Driver (2013-10-02 , Version9.18.13.1170, 318.33M)
2.AMD High-Definition (HD) Graphics Driver (2013-08-16 , Version12.105.9.0, 204.81M)
3.Intel High-Definition (HD) Graphics Driver (2013-08-16 , Version9.18.10.3224, 136.34M)
View 3 Replies
View Related
Sep 4, 2014
I am having problems connecting an external monitor, Dell 2709W, to my Elitebook 820 G1.
I have an Intel HD 4400 graphics solution. The monitor says:
Out of range signal
Cannot display this video mode
change computer display input to 1920 x 1200 @ 60Hz.
I use a Display Port cable for the connection.
My OS is Win 8.1 64bit
I have used the HP support assistant to update all hardware drivers...
View 3 Replies
View Related
Aug 6, 2014
After running my B570 (1068) with an extended display, the unit went into hibernation. On wake-up the laptop screen is indecipherable garbage. The second display will run to show BIOS startup but then reverts to the built-in screen - which is illegible. Toggling the F3 key does not get a good screen.
I read another post suggesting this is a hardware failure. What parts have failed?
View 6 Replies
View Related
Nov 5, 2013
I have Thinkpad Edge E330 bought this July, with win8 downgraded to win7. It recently started a problem where the laptop's own display doesn't display anything (just blank) if I don't have external display connected. The external display doesn't have be in use, just connected, and E330's own display works fine. If I disconnect the external display, the E330's own display goes blank also. It doesn't matter what display setting I have.Currently I'm not able to use my E330 as a laptop at all.
View 2 Replies
View Related
Nov 10, 2011
I cannot adjust the brightness of my display using the Fn keys or the Control Panel... I have already had to replace my battery once... I need to be able to adjust the brightness in order save my battery life!
View 8 Replies
View Related
Jul 11, 2013
A few weeks ago I cracked my glossy 1366x768 display on my Envy DV6 7227SA (product number C4V06EA#ABU). I have found a replacement online (part number 682089-001) but I was wondering if I could replace it with a matte 1920x1080 display (Part number 682090-001). I'm running Windows 8 64 bit
EDIT: This is the part I currently have in my notebook (broken) - [URL] ....
And this is what I'm wanting to replace it with - [URL] .....
View 6 Replies
View Related
Jun 12, 2012
I am running Win 8.1 x64 (up-to-date) on HP Pavilion 1322TX laptop. There are Intel HD Graphics 3000 and ATM Radeon HD 7450M two graphic cards as the device manager window. Recently I am getting blue screens and later message appear saying the ATM driver stopped working. I found many problems with this driver in the past as well. When I check the relevent page for my laptop model, there is no update since 2012..
Can I update these two drivers seperately by getting updates from Intel and AMD sites?
Is there any update for catalyst control system (CCC) ?
When I try to update through the CCC or HP Support Assist, it is always no updates..
View 2 Replies
View Related
Nov 5, 2014
I changed my operating system from WINDOWS 7 ULTIMATE 32 BIT TO WINDOWS 7 ULTIMATE 64 BIT,and the problem is after changing OS my laptop is not displaying Brightness bar. Brightness is increasing and decreasing but it is not showing bright bar.
Any driver i have to install ? if required then driver download link.
View 1 Replies
View Related
Jun 15, 2014
Today, I tried connecting an external display to my HP ENVY TouchSmart 15 laptop, via a USB hub, only to discover that using the touch screen points at the corresponding part of the external display rather than the inbuilt one (the displays are being extended). Can this be changed?
I'm using the same 64-bit Windows 8 installation and drivers that the computer came with.
View 4 Replies
View Related
Jun 17, 2014
for some reason the on screen display meter for my volume when pressing on the keyboard suddenly disappeared, I would like to get this back. I found this thread in the forum URL.... which another was having the same problem I'm having. The only difference is that I'm using HP Pavilion G7 with Windows 7.
View 1 Replies
View Related
Apr 24, 2014
The monitor on my HP Pavilion dv9830us laptop has not been working for some time and I have had to use an external CRT monitor for my display. A couple nights ago, my operating system (Ubuntu Linux 10.04) failed to load and because I can't get video feed to my external monitor until the video drivers on Ubuntu loads, I am unable to run Ubuntu's repair feature and the beginning of boot.
Is there a way I can get my laptop to use my external monitor at all times, even at the BIOS screen? Is there a setting in BIOS for this?
View 2 Replies
View Related
Nov 3, 2014
Currently whenever I startup my laptop the display flickers. If windows fully boots or I try to enter one of the startup menus the will flash briefly on the screen and then the display will return to and remain black.
I am able to run an HDMI cable to my TV and it seems to be running fine other than going black with the occasional distorted picture of windows booting.
View 1 Replies
View Related
Sep 25, 2012
I noticed the display automatically adjust its brightness when I open different webpages with different color background, which I'd rather it not do. How to disable this dynamic adjustment?
Product Name:
HP Pavilion dv7 Notebook PC
Product Number:
A5F92AV
OS:
Windows 7 home premium 64 bit
View 9 Replies
View Related
Dec 7, 2009
I have the option of upgrading to the Infinity display for $25 more. What is it and what are the pros and cons?
View 7 Replies
View Related
Jul 6, 2014
I have a pavilion dv6 6190se and I cant find an update of display driver in HP support and when i download the update from AMD site it doesn't work. the latest update on this site is v8.882 and i doesn't support win8 and it goes back to 2011-11-18. is there any way to update it?
View 7 Replies
View Related
Nov 20, 2011
The HP dv4-1548dx laptop computer has keys to adjust the display brightness of the LCD display but no keys to adjust the contrast. "Operating system Windows 7" How can I adjust the Contrast ?
View 2 Replies
View Related
Jan 11, 2012
One of our employees has an HP Pavilion G6 laptop. He uses an external display at work but has to keep the screen of the laptop open. If he closes the screen, then the video to the external display is power off.
What are the settings to allow the laptop screen to be closed and still be able to get video to an external display.
View 9 Replies
View Related
Jun 18, 2009
Have a dv5tse series, need to know what caused this and how to switch it back to horizontal display.
View 9 Replies
View Related
Oct 22, 2013
My screen is no longer good so im trying to connect a external display.Been trying for hours trying to get the external display to work of boot.Ive tryed everything changing 2 sets of hd cables and svga cables. The function key. The Laptop does recognize the display but seems to go into powersave mode or something.The only way i can get the external display to work is if i pull the battery and wait a bit then power up the display will work with a notice on the screen that cmos will be reset to defaults then restarts and back to where i was again.Pavilion dm4-1160us.
View 5 Replies
View Related
Oct 16, 2011
The brightness on my display is somewhat dim. How do you increase the brightness?
View 3 Replies
View Related
Nov 25, 2009
i bought a Sony VGN-AW31XY/Q notebook. Fast processor, 2 SSDs, 18.4" display, 8GB ram AND a antiglare display.
BUT it's a wide gamut display and i'm a webdesigner. I didn't know there is such a huge difference between this and a "normal" display. Red and green are oversaturated like hell.
My question: HOW or CAN i change the colors to "normal"? The point is, calibrating Photoshop or any other color managed software is no problem. But i need color mangagement for ANY other software too (Flash, Google Chrome and so on). There must be a solution.
Isn't there a tool that loads on startup where i can adjust the colors? Not only brightness, contrast and gamma levels but saturation and hue also?
View 5 Replies
View Related
Jul 10, 2009
I am having some flickering, and glitches in the display, and it seems, that it depends on the lcd position. It starts after I open the display, or sometimes after the laptop has been in use for a long time. It happened before, and the hp service replaced the lcd, saying that was a faulty one, but now, with the new one, is starting again. Is a bad replacement? I have to worry for the videocard? or motherboard? I spent 350uss on the new lcd, and I really hope is the replacement.
View 4 Replies
View Related
Jan 21, 2015
I cant find and install driver for display adapter. I see on device manager that without "ATI radeon 5400 seri" ....
View 5 Replies
View Related
May 7, 2014
I have a ENVY DV6-7246us, just upgraded to WIndows 8.1, and yesterday the display went to sleep, and upon wake, I now have a horizontal flickering line in the top 1/3 of the screen. It is a single horizontal line that appears to wrap what ever text it runs through, around to the other side of the screen. the upgrade to windows 8.1 was completed on Monday, and the line started yesterday. The computer is stock, with a genuine copy of Windows. I runa small business, and this computer is relied upon every day.
View 1 Replies
View Related
Jul 7, 2014
I've recently bought an HP Probook430 and installed Windows 7 Ultimate 32bit and I don't seem to be able to change the display brightness, using the fn button+f9/f10 (although volume settings are changed in the same method smoothly).
Although the brightness settings don't seem to change, this bar does appear when pressing fn+f9/f10. What should I do in order to make the display brightness settings changable?
View 3 Replies
View Related
