I have a Dell Inspiron 9400 with a rev0 7900gs Go, and I recently flashed it with the 7900GTX bios (790GTXUN.ROM) and followed the info given on post 1 here: [url]
The clocks for this BIOS were set at 500/600 by default, but I went ahead and clocked them up to 530/630, then eventually up to 575/700. I am running ATi Tool 0.27b2 and ran the artifact test, it ran for about 10 minutes and then some artifacts started to show at about 93c. As soon as they started coming up, I canceled the artifact test then rebooted, and re flashed back to the original 7900GS BIOS. I have been playing WoW for the last 30mins and it has been running fine but I am worried that I may have damaged my card, would anyone please be able to tell me what you think or what could have caused the artifacting?
I have a Dell XPS M2010 which i love....but recently my video card was somehow damaged and as i have warranty i called the technical support on 20th march(friday) nd they said they were gona send me a engineer on tuesday if not they were gona call me nd tell me.... but i did not receive anycall so i took a day off and waited but no1 came. so i called them later that day and they sed they don hav the part so i will have to wait a bit longer for the part and they will let me kno with updates...but i still haven't heard from dem yet nd its my final weeks in uni nd i really need my laptop...they sent me an email sayin that the parts shud arrive by "mid-February" i don kno were febr came from.
Anyway...when I took it out of the box, it has a fairly large, very noticeable black scratch on the LCD. Has anybody else experienced this? I've called dell and they are sending a tech out to replace it. Question:
I recently did a clean install of Windows 7 RC over Vista on my inspiron 1520. Windows 7 appeared to automatically install the correct drivers for everything
except the graphics card, as everything else appeared to be working properly (e.g. wireless, scrollpad, etc.) After manually downloading and installing the NVidia driver, the aero stuff started to work.
However shortly afterwards, I noticed that the left side of my screen seemed slightly dimmer than the rest of the screen. The problem gets even worse, as the backlight would suddenly turn off after shorter and shorter periods.
I thought maybe the windows 7 drivers were incompatible with my the laptop, so I uninstalled windows 7 and installed Vista back along with the original drivers, but that didn't fix the problem .....
I have a Dell Latitude D600 that came with a 60gb hard drive. I had a D600 previous to this one with a 40gb hard drive and I swapped this hard drive into the newer D600 since I had all my important data stored on it already.
Just the other day when I was performing some maintenance on the D600,
I accidentally dropped the 40gb on the floor when it was out of the computer. I thought everything was fine because it seemed to boot up when
I re-installed it, but I hadn't actually tried using it until today
Today at the end of school I took my notebook (Sony Vaio SR) out of my bag (special notebook bag) and got it out of stand by. I noticed that there were vertical lines on exactly the left half of the screen.
The lines are separated exactly equal and the color changes when images are moved. They are not of a certain color, perhaps a bit brown .....
At last the day came.. after almost a month of waiting i got my new Z540 - very stylish and nice machine.. but unfortantly i noticed the top-panel (keyboard) seemed un-attached to the buttom.. see the pics:
I sent my 8510p laptop in to HP to fix a video problem and they replaced the video board, sent it back to me. When I got it back it was very clear that there was still a problem, the video signal intermittently clouded up like there was a disconnect in the cable - I figured the tech didn't press the connector cable firmly into place. I sent it back for the 2nd time.
I got the laptop back and all my video problems were fixed; however, there was now a 2 to 3 inch long crack around one of the screws on the bottom of the case - like someone took a chisel or a screwdriver to pry up at the case. I told customer service and they sent a box for me to pack it up and send it back. This is the 3rd week in a row without my computer at home - it's starting to cause major problems because I need my computer to study.
I get a call back this last Friday from billing at HP telling me they aren't going to fix the case unless I pay them $200 even though it's very clear that the crack was caused by an incompetent tech trying to get into the unit. There was no damage to the shipping box and this kind of crack simply could not have happened during shipping - HP also tells me that because I got it late Thursday and didn't report it til Sunday morning, that I can't be covered for shipping damage (even though there was no shipping damage). They want $89 to send it back to me unfixed too.
I told them I wouldn't pay them anything for damage they caused - I left a message on the voicemail of the billing department supervisor...............
HP Chromebook 11 Model CB2 Purchased June 2014 Problems with charging for about half of that time. It has always been difficult plugging in the charger and is no longer possible due to visible damage of the charging port.
My Inspiron laptop is not able to boot. I am getting the message:
"No Boot Device Found. Press any key to reboot the machine_"
I took the laptop to a local service center and they said that I need a new motherboard. They said they swapped the hard drive with a working one and got the same error message. By that their diagnosis is that the motherboard is damaged.
Our HDD has been damaged and lost everything. No matter because I have a backup of files, but I lost my Windows 7 recovery partition.
I have 5 Computers of this model exactly . Is it possible to create recovery disks from any HP application (from a good HP620 model) ? Is it possible to create a recovery partition from one of our HP620 ??
In HP630 there is an application called Recovery Manager,, but not in HP620 .
I need to remove it, but the screw on the bottom, which needs to be removed in order to take out the cd drive, has been damaged by me trying to unscrew it, and it will not turn, so the head is damaged and i cannot use a screw driver to turn it.
My Dell 1505 wireless N card is a constant headache, If I hide my ssid the card detects and connects to my router but I can never access the internet. It may work sometimes but most of the time my SSID has to be on.
I have tested this with two different routers and the results were the same, vista shows local access only . I have tried using drivers from laptopvideo2go and reimaging the computer, I am now fed up and want to get a new wifi car
I have a brand new M4400, running W7pro x64. The M4400 came with an internal SD card reader. Now this card reader cannot read some standard SD cards (other work fine). Especially,
I have a Transcend SD 4GB 133x (http://www.bestpriceaudiovideo.com/i...ard-detail.jpg) that is problematic.
When I put the card in the reader, W7 tells me to format the card. This I do not want to do, of course. If I open Disk Management, it takes ages to open, and eventually shows the card as "Unallocated".
I've been having problems with my video card. (M1710 with a 7950GTX card). The card was overheating and even after applying AS5 and cleaning the vents it was reaching around 100c in games. After about a year, i started to also get memory parity errors...
Long story short, i contacted dell and they mailed me a new mb and a new video card.
I just got it now, and i am going to open the rig and replace the video card.. I am just not sure about the mother board, should i replace it as well ?
The parts that dell sent are refurbished parts, and as i know that my m.board is working i am not sure whether i should replace it or not.
My main uses with be photo-editing (Photoshop) video watching, and light-to-moderate gaming. Will there be a noticeable difference if I make the jump to 512? Are the any games that are playable on the 512 that are completely unplayable on the 256 (ex. GTAIV)?
I bought a new 8935G and found that the card reader cannot read my 2GB H-Type xD card. FDXGDFSGDFS The camera I'm using it in does not show any problem. GDFSGDFSG I tried reinstalling reader driver. GDSFGSF I teste the reader with an old 16Mb xD card and this works. FSGFSG When I put the 2GB card in, Windows Vista says it has to be formatted; at this point the card is already unreadable in the camera and must be formatted againg there.
If I try to format on pc, the process stops at about 90% with an error.
I bought a new 8935G and found that the card reader cannot read my 2GB H-Type xD card. GSDFGS The camera I'm using it in does not show any problem. GDFSGS I tried reinstalling reader driver. FGFSG I teste the reader with an old 16Mb xD card and this works. SFGF When I put the 2GB card in, Windows Vista says it has to be formatted; at this point the card is already unreadable in the camera and must be formatted againg there.
If I try to format on pc, the process stops at about 90% with an error.