Our HDD has been damaged and lost everything. No matter because I have a backup of files, but I lost my Windows 7 recovery partition.
I have 5 Computers of this model exactly . Is it possible to create recovery disks from any HP application (from a good HP620 model) ? Is it possible to create a recovery partition from one of our HP620 ??
In HP630 there is an application called Recovery Manager,, but not in HP620 .
I have HP Pavillion DV6 6115tx laptop and accidently i deleted the Drivers And Applications Source For Recovery Manager from C:.. Now I want to get that source back.
Product HP Pavillion DV6 6115tx
OS Windows 7 64Bit
The hard drive on HP G62t-350 CTO Notebook was failing. I was able to create a recovery USB in the Recovery Manager. I installed a new 120 GB SSD. The original hard drive was larger, can't remember now but 250 or 500 GB. I know the Recovering the System after the Hard Drive is Replaced (Windows 7) says "To avoid problems, install a hard drive as large or larger than the replaced hard drive," but that's a question for later.
Computer booted fine from USB (in fact, is set to boot from USB if present by default). Recovery Manager starts. I choose minimal install. It goes through the process of partitioning the SSD and copying files. Then says to remove external media and reboot, computer will reboot several times during the process, blah, blah, blah. I pull out the USB and reboot, but after POST I get "No bootable media present".
If I try to reboot leaving the USB in, it boots to USB and we're back at the beginning. I am able to confirm with a rescue disk that the SSD has one NTFS partition that has had Windows files copied to it, and a large amount of unallocated space. (Something like 60%/40%.)
How do I make the hard drive bootable, and if it were bootable, would the recovery process complete?What's going on with the partitions? Is it creating the recovery partition first, and then after boot the recovery partition installs the OS? If so, I might have to abandon this process because since I'm moving to smaller storage, I don't want to devote half of the drive to a recovery partition.
i have hp pavilion g6 notebook pc laptop...but it does not contain recovery disk and whenever i create recovery disk from recoverry manager it failed to verify disk 1 and show the message "insert another disk " it happen again and again ...what to do....
View 3 Replies View RelatedI need the recovery disc for my laptop HP Pavilion g6 Notebook PC, Product Number: A4G29AVI don't have the Recovery Manager program in my computer, I don't know why.
View 1 Replies View RelatedI need to download the Recovery Manager for windows 8, my laptop is the HP TouchSmart 15-b130eaI had to replace the HDD and install windows 8, since doing this i have now managed to sort out the original HDD and found that the recovery partition is still intact with all the files needed to do a full Factory Restore, sadly i canot do this, unless i can download the RM for windows 8?
View 5 Replies View RelatedI have purchased Hp Envy 4 with windows 7 recently, By accidently I have lost recoveryMgr.exe files which was originally in D drive.. how can I re download this, (I formatted d drive accidenly)
View 6 Replies View RelatedI just bought a DV5se laptop and dv6t. Both have windows vista on it with the usual bloatware.(also as u know there is a system recovery partition which i wont touch)
I would like to install win7 rtm which is coming on monday.
Two reasons for doing this:
-Heard that 7 is faster than vista and
-to get rid of the bloatware.
I will do a clean install i.e Format c and install win7.
The question is when I turn on the computer(and when the hp logo comes) it says press esc for startup options. if u press esc there are a number of options like system information and system recovery. If i format c will these options be still there? specially the system recovery option.
Secondly is there any disadvantage in formating the preinstalled vista and clean installing Windows 7 RTM as vista was preinstalled by HP itself(in terms of being optimized etc, is there such a thing?)...
I use HP 15r007tx notebook. Mine is not a genuine OS. How do I download HP Recovery Manager???
View 1 Replies View Relatedwhat of an extensive issue on a dv2710us on Vista.
One of the crippling elements of this whole situation is this computers CD drive is not working. Windows was not recognizing a CD/DVD drive present, which is what I was trying to fix. So I accessed the recovery manager by pressing F11 on bootup to have Windows install all of the original files, but not format the C drive. Well it began formatting the C drive, and a progress bar showed up so I powered down the PC before it got past 0%. When I powered it back up, I get a "Bootmgr is missing" message and am unable to get past that.
After doing some research online, I accessed the recovery manager and opened Command, and did a Bootrec /fixboot, the operation completed and upon restarting, it booted straight to the recovery manager. I was no longer able to boot to the C drive. I did a little more research and opened up Command again, and used DISKPART to make the C drive active.
This time after rebooting the cmoputer, I am once again given the Bootmgr is missing message. Not only that, I am unable to press f11 to get to recovery manager anymore.
At this point, I mainly need to access the harddrive so I can backup some improtant files, and then do a full reformat of the C drive. I have a disc of Ubuntu I had the idea of loading up to access the C drive, however since the DVD drive is not recognizing discs I am unable to use it. I also downloaded a Vista recovery disc from here and placed it a USB stick drive. Upon booting up I can press f9 to select multi boot options. When the drive is inserted the options are Laptop harddrive, and USB diskette. The USB diskette option is not present when I have the stick drive removed. I select to boot from USB diskette and the computer proceeds with a black screen as if it may boot, but then returns to the initial boot up screen (where you can use F keys to access BIOS, etc.) and then got to Bootmgr is missing.
I've just attempted to burn my recovery discs, currently stalled after burning disc 1 of 3 with the message:
"Re-insert the disc you have just written and close the tray"
Did that an hour ago. Nothing new since. Looks the same as this problem [URL]......
Machine is a Presario CQ61, OS is vista home premium.
how to download recovery manager? I have an hp pavilion dv7-1070el notebook, OS Windows 7 32-bit.
View 9 Replies View RelatedAfter using the inbuild recovery manager on my Aspire one 753 my laptop will not conect to Wireless internet. I think the problem has somthing to do with drivers but i am not sure.
View 9 Replies View Relatedi got my new dv5 last night and ive got a problem. The first time it happened was when i tried to make one of those back up DVD's, i open the disc recovery manager, and the computer suddenly logs off, and im reverted back to the welcome screen where i need to click my name to log back in. Every program that was running simply dissapears. I was like 'crap... i guess i cant make any back up discs'. But then it happened again when i tried to install WinRAR, it was corrupted becuase i copied the files from another computer and after i press ok in the error box it does the same thing.. 3 times i had to re-download a file i was downloading at that time. I guess it only happens when theres an error. I immediatly uninstalled norton and most of the bloatware so it cant be due to that. So now im paranoid about opening any file hoping that it wouldnt log off like that suddenly and lose my work.
View 6 Replies View RelatedI have a Dell Inspiron 9400 with a rev0 7900gs Go, and I recently flashed it with the 7900GTX bios (790GTXUN.ROM) and followed the info given on post 1 here: [url]
The clocks for this BIOS were set at 500/600 by default, but I went ahead and clocked them up to 530/630, then eventually up to 575/700. I am running ATi Tool 0.27b2 and ran the artifact test, it ran for about 10 minutes and then some artifacts started to show at about 93c. As soon as they started coming up, I canceled the artifact test then rebooted, and re flashed back to the original 7900GS BIOS. I have been playing WoW for the last 30mins and it has been running fine but I am worried that I may have damaged my card, would anyone please be able to tell me what you think or what could have caused the artifacting?
Today at the end of school I took my notebook (Sony Vaio SR) out of my bag (special notebook bag) and got it out of stand by. I noticed that there were vertical lines on exactly the left half of the screen.
The lines are separated exactly equal and the color changes when images are moved. They are not of a certain color, perhaps a bit brown .....
At last the day came.. after almost a month of waiting i got my new Z540 - very stylish and nice machine.. but unfortantly i noticed the top-panel (keyboard) seemed un-attached to the buttom.. see the pics:
here you can see the top-panel is unattached.
here you can see the top-panel "wobbles
I sent my 8510p laptop in to HP to fix a video problem and they replaced the video board, sent it back to me. When I got it back it was very clear that there was still a problem, the video signal intermittently clouded up like there was a disconnect in the cable - I figured the tech didn't press the connector cable firmly into place. I sent it back for the 2nd time.
I got the laptop back and all my video problems were fixed; however, there was now a 2 to 3 inch long crack around one of the screws on the bottom of the case - like someone took a chisel or a screwdriver to pry up at the case. I told customer service and they sent a box for me to pack it up and send it back. This is the 3rd week in a row without my computer at home - it's starting to cause major problems because I need my computer to study.
I get a call back this last Friday from billing at HP telling me they aren't going to fix the case unless I pay them $200 even though it's very clear that the crack was caused by an incompetent tech trying to get into the unit. There was no damage to the shipping box and this kind of crack simply could not have happened during shipping - HP also tells me that because I got it late Thursday and didn't report it til Sunday morning, that I can't be covered for shipping damage (even though there was no shipping damage). They want $89 to send it back to me unfixed too.
I told them I wouldn't pay them anything for damage they caused - I left a message on the voicemail of the billing department supervisor...............
After a rather good Halloween party i managed to come back and somehow paint my laptop with water.
It was shut but i found water on the lid, water underneath it and the keyboard had left a big moisture imprint on the screen
I just received my 1645...
i7 820
8 Gigs Ram
128 Gig Solid State
RGB...
Anyway...when I took it out of the box, it has a fairly large, very noticeable black scratch on the LCD. Has anybody else experienced this? I've called dell and they are sending a tech out to replace it. Question:
HP Chromebook 11 Model CB2 Purchased June 2014 Problems with charging for about half of that time. It has always been difficult plugging in the charger and is no longer possible due to visible damage of the charging port.
View 1 Replies View RelatedI recently did a clean install of Windows 7 RC over Vista on my inspiron 1520. Windows 7 appeared to automatically install the correct drivers for everything
except the graphics card, as everything else appeared to be working properly (e.g. wireless, scrollpad, etc.) After manually downloading and installing the NVidia driver, the aero stuff started to work.
However shortly afterwards, I noticed that the left side of my screen seemed slightly dimmer than the rest of the screen. The problem gets even worse, as the backlight would suddenly turn off after shorter and shorter periods.
I thought maybe the windows 7 drivers were incompatible with my the laptop, so I uninstalled windows 7 and installed Vista back along with the original drivers, but that didn't fix the problem .....
I have a Dell XPS M2010 which i love....but recently my video card was somehow damaged and as i have warranty i called the technical support on 20th march(friday) nd they said they were gona send me a engineer on tuesday if not they were gona call me nd tell me....
but i did not receive anycall so i took a day off and waited but no1 came. so i called them later that day and they sed they don hav the part so i will have to wait a bit longer for the part and they will let me kno with updates...but i still haven't heard from dem yet nd its my final weeks in uni nd i really need my laptop...they sent me an email sayin that the parts shud arrive by "mid-February" i don kno were febr came from.
I have a Dell Latitude D600 that came with a 60gb hard drive. I had a D600 previous to this one with a 40gb hard drive and I swapped this hard drive into the newer D600 since I had all my important data stored on it already.
Just the other day when I was performing some maintenance on the D600,
I accidentally dropped the 40gb on the floor when it was out of the computer. I thought everything was fine because it seemed to boot up when
I re-installed it, but I hadn't actually tried using it until today
I have a dv9000 series and the the ribbon cable that goes from the power button to it's respective conector on the motherboard is a bit damaged one of the metal contacts at one end has "skinned" off.
What would you do, look for a replacement online, i doubt a shop would stoc such a thing, of do these cables tend to be standard, the model number of the cable is E118077.
Also you should be able to completely remove a motherboard, including detaching it from the screen and still power the fan on, obvioulsy with the battery connected?
It's this cable, [url]
could you somewow slice the end off and then cut a small section so you have some new contacts showing?
So my girlfriend just received her new dell studio 1458 and the dvd drive just wreck 2 dvds, the sims 3 and modern warfare 2. There is now a circle ring etched onto each dvd by the dvd drive,
Now the dvds are not readable anymore, speaking to technical support right now and they refused to replace those dvds, she just received this computer and this drive is already faulty!
Spoke to a supervisor and all he said dell will replace the dvd drive and I am thinking no sh*t sherlock of course you have to
my business partner dropped her XPS 1330 and cosmetically damaged the case and cover.
we have Complete Care and Next Business Day coverage. phoned in the claim and Dell advised that NBD only applies to hardware failure due to Dell and not a dropped machine
I have studio xps 16
last week, audio jacks stopped working
and I couldn't hear anything neither from headphones nor integrated speakers
so as a quick solution, I disassembled the laptop and soldered 3 wires over the jacks to make integrated speakers/mic work
Now I can hear sound but of course still can't plug external speakers, headphones or mics .....
I have a DV9000 with a GeForce Go 7600.
I was browsing the HP drivers yesterday when I noticed that a new version of the GeForce drivers was available for my system, released on April 28, 2009. Their site describes it as: HP Link
Quote:
Description: This package contains the driver for the NVIDIA GeForce Series video chip in the supported notebook models and operating systems................
I have Compaq Presario M2253AP laptop with Serial No.[Edited for Personal Information]and Product No.EH049PA. bought in June 2006 and is having Windows XP as OS
The internal speakers were not working and when checked cones of both the speakers are damaged. I need replacement of the entire speaker bar.