I just booted into the BIOS of my Inspiron 15 3531 model and I realize that the only boot option it allows me to use is from the hard drive.......that's it. No external usb, no lan option (it doesn't have an ethernet port, so I understand that), nothing.....Why would setup a BIOS like this? How to boot this system from a USB or external cd drive...
View 3 RepliesI would like to know if on DELL Inspiron 3531 motherboard there is the possibility to mount an optical drive, cause the laptop comes without the CD/DVD drive. If is it possible, where i can buy the optical drive for the laptop?
View 2 Replies View RelatedMy Inspiron laptop is not able to boot. I am getting the message:
"No Boot Device Found. Press any key to reboot the machine_"
I took the laptop to a local service center and they said that I need a new motherboard. They said they swapped the hard drive with a working one and got the same error message. By that their diagnosis is that the motherboard is damaged.
Where I can purchase a replacement motherboard?
I recently had my CD/dvdrw drive crash. It plays DVDs but not CDs and I need the CD portion to work.
Unfortunately I think I'm going to order one from dell and its going to take 5 business days (7 days cause of the weekend) and I need to boot up an operating system via CD for work.
My bios says that it can be started from a USB storage device, but my external CD drive doesn't even seem like its powered up when I restart.
In my bios, I have the boot option set to USB storage device and have it set as priority over any other boot option. I just paid for this external drive today, and things are still looking grim.
Vaio notebook model number: PCG-VX89
Trying to install OS with external CD/DVD drive to no avail. Have done everything possible including:
-tried 3 different externals drives
-attempted BIOS BOOT ORDER: BOOT FROM CD/DVD and tried REMOVABLE DEVICE setting
-attemped 'esc' one time BOOT ORDER at startup...attempted both CD/DVD and REMOVABLE DEVICE
System doesnt recognize EXTERNAL CD/DVD in BIOS....only in WINDOWS..after machine fully starts up. Looked for any kind of UPDATE for DRIVERS OR BIOS on SONY SUPPORT for this model...there is none.
I use my MacBook Pro for most everything except at home where I have a desktop system that's a few years old. The MacBook Pro should generally run rings around it except for disk performance and that's something that I'd like to fix. So I picked up a 1 TB MyBook and it's attached to the MacBook Pro right now but the MBP doesn't see the disk. I assume that I need to partition and format the drive.
The MacBook Pro currently has Mac OSX and Windows XP on the internal drive and they work just fine. What I'd like to do is to be able to boot Mac OSX, WinXP x64 and Win32 off of the 1 TB drive. I was hoping to partition it into three pieces and boot whichever OS I wanted at the time.
What I'd like to know is if it is possible to do this (3 OS on one external drive that the Mac could boot from) and how to go about setting this up. I would grab XP x64 and XP Win32 off another machine (that machine has three Windows licenses running) and move them to the MacBook Pro (with Microsoft's help if needed).
I wanted to change boot sequence to boot from external DVD drive to install Win8. To access the BIOS I hit Enter (empty password I guess) but in the BIOS everything is greyed out: I can't make any changes. What is going on?
View 9 Replies View RelatedI have just purchased a new dell "Dell Inspiron i3531-1200BK 15.6-Inch Laptop", i cannot open the disc reader. I'd lika know how to do it?
View 2 Replies View RelatedI can't get past BIOS when my W530 is connected to an external hard drive, in my case a WD My Book Essential 3TB (USB 3.0).
Here are some previous threads I've found:
-W520 hangs on boot when a WD SES USB drive is connected
-W520 won't boot with SES device connected to USB
-W530 stuck or won't boot when WD external drive plugged in.
I would be satisfied if I could disable USB Legacy Support in BIOS and move on, but I can't find that option anywhere on my W530.
Here's what I've tried so far:
-Updated BIOS to the latest version (1.11) and updated WD My Book firmware.
-Changed the port (tried both USB 2.0 and 3.0, powered and unpowered) that the drive is connected to.
-Removed everything except my MSATA drive in boot priority. I can't enter BIOS settings when the WD drive is connected so I can't actually exclude it from the boot priority, but I've tried to enable Boot Order Lock.
-Disabled USB options in BIOS (USB UEFI BIOS Support, Always on USB, etc.).Switched between Quick and Diagnostic boot. With Quick it's stuck at the Thinkpad splash screen, with Diagnostic I just get a black screen.
-Tried with both GPT and MBR partitions styles for the external drive.
-Changed between UEFI and Legacy.Tried it with my friend's Thinkpad T520, wouldn't boot either with the drive connected...
Other information:
My Thinkpad is docked to a Thinkpad Mini Dock Plus Series 3 with USB 3.0 (170W). I haven't bothered to try it undocked, but judging from the other posts it's not likely to fix the issue.
Surprisingly I don't have this issue with my older WD My Book Essential Edition 2.0 1TB (USB 2.0) external hard drive. I don't think it would work to simply remove the drive from boot priority. I've removed my other external hard drive but I can still hear it spinning up during boot (when the Thinkpad splash screen shows up), which suggest that it's still being identified during boot. Is there really no workaround other than "get a different enclosure" or "unplug it when powering on"? Are there any >3TB external hard drives, preferably USB 3.0, that are known to work?
It appears that the only way to scroll with the current driver is the two finger scroll. I need a driver that will allow me to edge scroll, that is using one finger on the far right of the touchpad for scrolling. Bonus points if the driver allows "momentum" and doesn't mess up other stuff.
View 3 Replies View RelatedThe problems still exist after I do a fresh restore with Lenovo DVDs. Also ran the Lenovo Update & Driver utility.
1. My W530 wont boot or start if I have a External drives plugged in. It stucked at "ThinkPad" screen. I have to unplug the external drive and press/old power button to shut it down. Same thing happened when the laptop is docked.
=> Contacted the technical support today. They told me I have to unplug and plug it back in everytime. I told him that there is a reason I got the dock station so I don't have to unplug and plug my external drive every time.
2. I have no problems booting if thumbs drive plugged in. But it keep "Auto run" everytime I turn on the machine.
I do not have this problem with my W500 and W510.
W530, Intel Core i7-3820, 32G DDR3 RAM, 180G Intel SSD, Windows 7 x64, NVIDIA Quadro K2000M.
I bought my first laptop--an inspirin 17R. I would think in this day and age---being able to boot from USB would be a gimme!
I have a bootable Toshiba Canvio external drive that I have images for restoration stored on. I know you can boot from a dvd drive with a bootable DVD (which I did create) But---if the drive itself is bootable---why does the BIOS not have that option?
What does one have to do in this day to boot from USB?
Inspiron 15z Ultrabook, Windows 8, DELL System Recovery.
I have an external Seagate Expansion Drive 2TB and had backup files on it. I created a new partition by shrinking the E: volume and made F: to use for the DELL System Recovery.
I selected the F: partition when asked what drive to use. I was 100% certain E: would never chosen during any steps in the process. After it finished I looked in Computer and found both partitions had been formatted and a DBR_Boot placed in both. Yet E: (where personal files were stored) is basically empty other than what appears to be a boot up capability and F: has the recovery files.
Why has this happened? I need those files. Is there a way to reverse the process or will file recovery software be needed in an attempt to regain those files?
I can't believe this hasn't happened to other people, must be a common occurrence. What I could do to recover lost files.
I've recently purchased a Dell Inspiron 7520 SE FHD and following the indications on the drivers download page I upgraded Bios to A9 version. Now I'm having 2 issues, one minor and one that bothers me pretty hard.
1. I can't boot fro USB stick when I try to install WIN 7 again. If I have the bootable usb stick with WIN 7 (created with Microsoft USB DVD Bootable Tool) plugged in the usb port and I press either F12 for boot options or F2 for Setup everything blocks and won't have any other option but to keep the turn on button pressed until the laptop turns off.
I also tried F12/F2 without the USB stick plugged in and I can't find the option to boot from USB neither under F12 menu or Boot menu when pressing F2 for Setup.
2. After doing the BIOS upgrade, the first thing I see, the black page with the Dell Logo seems to be a little broken, meaning the logo is bigger then it used to be and so is the blue line that shows the loading status below it.
My hard drive went bad (CHKDSK fails), so I replaced it. When it boots, I see the Dell starting up screen with F2 and F12 options but then it immediately displays a black screen with the text "Operating System Not Found". I've tried to press F12 with no luck, it always displays "Operating System Not Found". I double checked to ensure the hard drive is not loose and everything looks fine.
View 3 Replies View RelatedThis laptop has win8, I am trying to load win7 on this laptop but I am not understanding how to change the boot order to boot from the cd drive, what's listed below is what I am seeing in SETUP? Boot list option [UEFI] File browser ADD boot option File browser Del boot option Secure boot [Enabled] Load legacy option rom [Disabled] Boot option priorities Boot option #1 [Windows boot manager] Boot option #2 [UEFI OS] Boot option #3 [UEFI IP4 Realtek PCIe FE Family Controller] Boot option #4 [UEFI IP6 Realtek PCIe FE Family Controller]
Also, my research is showing this is a 64 bit unit.
I have just purchased a Dell Inspiron 17R Special Edition 7720. It came with a preinstalled Windows 8 (so 64-bit and mandatory UEFI boot). I want to use Linux (more specifically, Archlinux) for work and Windows for games, so dual boot is needed.
I almost completed the Linux installation except for the bootloader: I need to boot Linux from UEFI and didn't manage to do it so far. Here is what I did after I received the PC:
-Disabled Secure Boot; updated BIOS to version A12
-Resized the main Windows partition and created a few partitions for Linux;
-Switched to legacy boot mode and managed to boot a MBR-bootable Arch linux installation USB drive;
-Installed most of the system switched back to UEFI boot mode, Secure Boot off.
At this time I needed to boot the kernel from UEFI for the bootloader installation program to have mandatory access to the EFI environment variables. So I created an UEFI-bootable Archlinux installation USB drive (with a FAT partition) but so far I couldn't manage to successfully boot this drive from UEFI instead of Windows 8.
I think I really tried every single combination, such as:
different USB ports; different boot entries created with F2 boot setup, with different parameters; different orders for the boot entries; hit my boot entries directly within F12 boot menu.
No matter what, in UEFI mode the system always boots the Windows partition.
Also, I could not find any relevant manual or software documentation about the A12 BIOS on the Dell site, did I miss something?
The solution that the user described in this thread to UEFI-boot to a DVD did not work for me with a USB drive.
Dell Inspiron 15Z model 5523 laptop less than 2 years old. Locked up during a Windows update. Refreshed it and lost all my programs. Downloaded Firefox accidentally from a bad site and it was bundled with malware. So I refreshed the laptop again. Had everything working and then later that day it just quit. Locked up and when I rebooted, it said no hard drive could be found. I have a new hard drive, but how do I get my Windows 8 (paid for with the computer) and a boot disk from Dell?
View 1 Replies View RelatedI have an inspiron 9300 with 100 GB HDD. Recently I had a huge malware or even virus that slowed down my computer tremendously.
I took it to geeksquad and they where able to remove it, but it still ran a lot slower than I ever remembered.
I purchased a Dell 7720 (contains 2 1TB HDD's) after speaking to Dell technical support who reassured me that when I install an mSATA drive, it is possible to install the OS on the drive and use it as the primary boot device.
So I received my 7720, plugged in the mSATA drive and cloned the OS partition to the drive. When I restarted the machine, behold... it is not in the list of bootable drives, however it has been recognized as an mSATA drive. After messing around with the BIOS for 30 minutes, I am unable to get it to be a bootable device.
I had to install a new hard drive onto Dell Inspiron 17R (5720, Mid 2012). Ordered new hard drive from Dell, and also Operating System reinstall DVD. Windows was loading, but computer shut down and did not restart. I pressed the power button to restart, but now get 'BOOT MGR is missing' error, and don't know what to do next. I chose 'Custom Installation' and selected the only hard drive that was visible when prompted. Computer will not restart with DVD or without DVD. What now? Windows 7-
View 1 Replies View RelatedI want my Inspiron 14z Ultrabook to have two Operating Systems, Fedora (Linux) and Windows 7. Is it possible to use the SSD drive to accelerate the System's performance on both operating system?
Secondly, Can I still restore my machine to Factory settings???
I've finally managed to find someone to replace my optical drive with an SSD (wouldn't want to void the warranty, do we?) and I've got quite bit of a problem here. After installing Windows 8 on the SSD, I get the error "winload.exe missing or corrupted" and error code 0xc000000e. The installer automatically put the boot data on the original HDD, while the OS is on the SSD - and it seems the UEFI can't find the OS like this.
The OS itself seems to be intact, since pressing F12 at booting and selecting Hard Drive starts the computer normally.
I've tried to move the boot sector to the SSD, but it seems I'm missing something... Would a BIOS update maybe work with this?
My uncle has a Dell Inspiron 1545 with 3Gb RAM, 160 Gb HD and Windows Vista Home Premium. On boot up there is an error message stating that a back up should be performed immediately as the hard drive has a serious problem.
The good news is that I managed to make a clone of the 160 Gb HD to a 1000 Gb HD (Western Digital Blue) using Paragon software before the original drive failed. The bad news is that the cloning process stopped at 42%, but this 42% included the recovery partition and another part of the HD called Dell Utility.
I installed the cloned WD drive and pressed F8 on boot up, but the advanced boot menu did not appear. Instead I get the error message 'no bootable devices'.
I ran the diagnostics program using F5. All the tests were completed and 'passed'. The BIOS recognizes the new drive as 1000 Gb.
Question: how do I boot the laptop? My uncle does not have any recovery media.
The hd on my Inspiron 1545 has crashed and subsequently will not boot up. I have purchased a new hd and fitted it.
The recovery disks I have go through the local dell recovery routine but fail on the second disk. I only have the utilities cd from dell no other CDs.
I have windows 7. What I need to restart the laptop?
I have a HP 15 Notebook PC with no dvd drive recently I was sent the system recovery cds from HP. I dont have an external dvd drive. What i do have is a Toshiba Satelight laptop with Widows 7 and a good dvd drive. Also I have a 500 GB external hard drive. I was thinking maybe I could copy the disks onto the external harddrive with the Toshiba dvd drive. Then attach the external hard drive to my HP 15 Notebook by usb port and install Hp recovey disks from the external hard drive.
View 2 Replies View RelatedI replaced my WD 250GB RPM 5400 with a WD 500GB RPM 7200 and I get a "No boot sector on internal hard drive" "No bootable devices" I have both original disks ( Operating System Windows 7 and Applications.) I've checked the BIOS and it shows the new HDD. I put the Operating System CD in and started the computer than I hit F12 went to CD/DVD and hit enter I received the message "No boot sector on Internal hard drive" "No bootable devices"
View 3 Replies View RelatedI bought new LG External Super Multi DVD Rewriter (Model GP08LU11) because the internal one is not working properly. Now I want to boot Windows 7 DVD from the external device but there is no option! There is only 3 options:1 - Internal HDD2 - CD/DVD/CD-RW Drive3 - Onboard NICI have Dell XPS M1530 and I update my BIOS with the last version A12 !!! When I connect the device in the notebook works fine - I can read and write DVDs! But I have no luck when I'm trying to boot the DVD - the device is not listed like a boot option! I have no problems with others notebooks and desktops!
View 16 Replies View Relatedthis is the second time i had a "made for dell" external dvd drive fail for my mini 9. i advise that everyone avoid this option.
dell wont give support for it and the company that sells it to dell is near impossible to get a hold of for product support.
Has anyone ordered dvd external drive off the built site? Agent gave me the part number (313-9874) but could not pull up item.
Wanted to know if this had the same finish as the V13 or not?