Dell Precision M4600 :: Windows 8 Installation On System?
Feb 25, 2013
Any documentation or instructions that I can follow to successfully install Windows 8 onto a Precision M4600 as if Dell had done a factory install?
Here are the problems I've faced with the installation I've tried to do myself:
Fan comes on high speed when screen is locked and gone blank.
Dell have not provided drivers for everything under Windows 8, which means I've got to figure out (a) which drivers I need to get from Windows 7 and (b) what order to install them in.
so this precision was originally a non baclit keyboard and recently replaced it with a backlit and the right arrow key does not work. I have checked every ribbon on this keyboard and everything is snug. I am running windows 8.1. Am I missing something here. Is it a hardware or software issue i need to look into?
I've got a problem with the laptop Lenovo T410s. I've put the new HDD on it (tried even the same with a different HDD too), and started to instal WIN 7 64-bit from the recovery disks. I used to do it many times so far with different Lenovo laptops without any problems. But this time, a while before the end of the instalation (when processing the sdrivebackup.wim) it stops and comes with a statement: " the recovery process has been finished, please ...." (but I see that the progres bar is far awayfrom 100%) , and finishes the instalation, reboot the computer and it comes the screen with the statement from the Windows Boot Manager:
"Windows failed to start. A recent hardware or software change might be the cause. To fix the problem (...)  File: Windowssystem32winload.exe Status: 0xc000000f Info: The selected entrycould not be loaded because the application is missing or corrupt"  I read a lot about the ways to solve similar problems, but they don't work on my case. The strange thing is, that I can instal WIN 8 or WIN7 from regular Windows instalation disks (not from Lenovo recovery, but from normal universal Windows instalation disks).
As I told before, I tried it in 2 different HDD disks with the same effect. It looks that the recovery instalation stops before the end without instaling some files which are missing later during starting the system.
System: Windows 7 Professional 64-bit Service pack 1
Problem: The laptop freezes several times a day, since we got the laptop two years ago. The freezes occur without dependance on how much hardware resources is the system using - it can freeze during video compilation or just when reading an internet article. The freeze is typically several minutes long, then the system often recovers and does all the events tasked to it during the freeze at once. When it doesnt recover in ten minutes, I turn the laptop off/on. Then all the files which were being written during the freeze have correct file size but are full of zeroes.
During the freeze itself, either it freezes when the light of HDD access is off - then sound doesnt work and mouse cursor is frozen too, or when the light of HDD access is on - and the light keeps shining during the whole freeze (not just blinking as usual), mouse cursor can be moved (but has Busy icon) and sound plays. It is possible to alt-tab into another window, but its not possible to use applications, run another application, or get to Start-menu. When you try to use the application you alt-tab into, it just goes non responsive until the freeze ends, then everything you inputed is performed at once.
The charger is plugged in and the battery is at 100%. This is a M4500 Precision laptop with Windows 7. I tried flashing bios from safemode, also from Windows PE.
I know this question is NOT about Dell Studio/Inspiron, but I know someone can help. So my old latitude D630 is messed up(running slowly, with all sorts of spyware and junk), so I decided to format and re-install XP. I used a bootable CD(which
"press any key to boot from CD..", it gives me this error:
"File i386iosinfo.inf cannot be loaded. The error is code 2... Setup cannot continue"
I finally received my 14z yesterday afternoon and was excited to to install Windows 7 via USB.
I used this guide (Install Windows 7/Vista from USB drive) which worked flawlessly, but now
I'm wondering where you guys are downloading your x64 drivers. I'm also wondering where I can find drivers for two instances of "Base System Device" showing up in my Device Manager
When I open a new window on my Dell Precision M6600 Windows 7 64 bit professional Laptop, that window will randomly have an "always on top" attribute. The problem does not seem to be related to any specific application. Â
I'm not pleased with some of the bloatware the laptop shipped with, so I just wanted to make sure that I can clean install from the "Reinstallation DVD" my computer came with. The product key isn't on the disc but it does seem to be on a sticker on the bottom of the notebook. Am I safe in doing this? I've already backed up all my files...
I have just ordered my M4400 with an 128gb ssd disk. I already have official windows XP 64 bit so i didn't order an operating system. My question is as follows:
1. with the SSD disk will i be able to install windows on my own? Am i going to need an extra driver like with the SATA drives?
2. if yes how will i be able to load it during the install? will i need nlite or similar software to create a windows installation cd?
3. Has anybody done it and knows the actual procedure? any other recomendations for the installation? Are there any tricks apart from installing the drivers in the order mentioned in the dell site?
4. Finally can i partition the SSD disk through the windows setup like with normal HDs?
I have a lot of stability issues with Factory Vista x64 installation, I will try to install from scratch Windows XP x64 and Windows Vista x64, I am not very familiar with Dell Notebooks (ex Lenovo guy), please could you tell me where I can find the correct installation sequence for all the drivers and tools?, I did some tests already, but I was not able to successfully install Dell Control Point, I got and error in the middle of the installation, I think I am doing something wrong, also I have installed the driver for UWB, but I do not find the tool to setup the Wireless USB hub?
After reading Its OFFICIAL! Windows XP works perfectly on the XPS m1330!, I've decided to install XP on my M1530, but i'm unsure on what to do about step 1:
"Step 1... You need a version of Windows XP SP2 with built-in SATA drivers... I personally used LastXP (feel free to go find this on a torrent site somewhere,
you have the option to install one of your own valid XP keys as part of its setup). (The other way is to put SATA drivers on a USB stick and hit F6 during initial Windows setup...) .....
I'm trying to re-install Vista 32 bits on my laptop, but it gives me a error. The error that I get is:
Windows installation encountered an unexpected error. Verify that the installation sources are accessible, and restart the installation. Error code: 0xE0000100
I've recently upgraded my 6930G to 4GB RAM as well as a 320GB & I decided to install Windows 7 64 bit RC instead of Vista.
I tried a test installation which went OK, with only 2 devices listed as requiring drivers to be installed are the Infra Red Device (which is listed as unknown device in Device Manager) and the fingerprint scanner.
What I was hoping is whether someone out there who's already installed Windows 7 RC and could help me with a guide for what other drivers should be installed, e.g. Chip set, ACHI etc. and whether they need to be installed in any particular order when it comes to installing for 'real'?
I noticed as well that the Acer empowering software was not compatable with Windows 7 (even in compatability mode), but am not sure whether this is any big deal?
I'm trying to upgrade the operating system on my laptop. Preinstalled Windows 7 x64 Home Basic, and I update to Windows 8 x64 Professional. At the end of the installation process hangs and all I see on the screen - this is the logo in the center of the screen, a few words at the bottom and five frozen in one position points that previously ran in a circle.
I repeated the installation several times, but all of these attempts have ended the same way.
Have any of you have a similar situation and how you solved it?
I'm in the process of upgrading my L521X/XPS 15 to Windows 8. The A09 BIOS introduced UEFI booting, which I of course intend to use. However, I can't get Windows installed when Smart Response is activated in the BIOS. The installer simply doesn't show any disks - even when loading the correct drivers. Changing to AHCI allows me to install - but of course without the benefit of Smart Response. Now, the question is: is it possible to use pure UEFI and Intel Smart Response Technology on the L521X?
I recently got a Aspire 9402 without HD, so I just pop in another HD. However, I have problem installing a fresh XP onto it. You guys might know the answer.
First, I put in an HD with XP installed that worked perfectly on a dell 600m. The Acer gave me a blue screen. This looks reasonable since everything is different.
Then I put in a formatted clean HD set to active, and a bootable windows XP installation CD into either the built-in DVD-burner or USB DVD-RW driver. During the startup, I pressed F12 to select the right boot device. However, Acer always gave me error message, and would not boot from CD. I also tried Windows 7 or Vista disks, still no go.
It seems to me that Acer is different to other brands I have dealt with, like Dell or HP. I am not sure getting a set of recovery Disks from Acer would solve the problem.
Is there a way to create a Windows Vista Installation disc from either the Hidden Partition or Recovery discs? I am not talking about a "Factory Restore"... I am talking about installing a clean version of Windows using the product key on the bottom of the laptop and then using the sony website or Recovery discs to install the drivers.
PhoenixBIOS Setting 1. BIOS Version : R0084J1 2. EC BIOS Version : RK084J1 3. IDE Channel 0 Master : 80GB (TOSHIBA) 4. IDE Channel 0 Slave : CD/DVD (SONY DVD DW-Q58A) 5. Boot Options: • Optical Drive • Floppy Disk Drive -> Y-E DATA USB-FDU-(USB) • Hard Disk Drive -> TOSHIBA MK8025GAS-(PM) • Network
I tried installing DVD writer software and my internal DVD stopped working. With an external DVD writer connected via USB, I tried to fix/repair Windows XP. My internal DVD was still not working. I wanted to completely format (as I accumulated lot of junk files over the years) my HDD and do a fresh install using my external DVD writer. At this point my external DVD was detecting via USB option at boot-up. For some reason, I could only replace the WINDOWS folder and all other files were not deleted.
I took my HDD out, connected it as an external HDD via USB to another laptop and did start -> control panel - > Administrative Tools -> Computer Management -> storage -> Disk Management: Delete Partition and Format my HDD.................
clean Windows 7 (64) installation. My guide is more of a 'bare bones' installation as I only installed what is needed for functionality of the big features. The guide is incomplete. I will continue to update the document as I make more progress. Please feel free to report anything you find that is incorrect etc.
keep in mind this is for a FZ280 E/B, I have no idea if it will work on other FZ models.
I am still having problems with the Bluetooth driver/software and the Wireless Switch Utility (what exactly is this needed for?). I believe the functionality for Bluetooth is dependent on the something to do with the Wireless Switch Utility. However I haven't had any luck installing either option.
There appears to be a problem with the power management. I unplugged the notebook for the first time and the battery went from 95% to 60% within 5 - 10 minutes. Any thoughts will be appreciated. I will be researching for a solution as well.
Below is the attached guide and a link to download the drivers I have used for the installation.
Recently i was gifted with an r32 think pad and i want to install win 7ultimate instead win xp pro that are already running. I insert the win 7 installation cd but when procedure starts it requests drivers which i dont have....
My 15-g092sa came with the atrocious win 8.1. I need to get some work done so I am trying to install my Windows 7 64 Pro. That DVD has been used for several times everytime I had replaced hardware. It boots up fine on other hardware.However, it will not boot on this machine. I found the BIOS settings and put the hard drive (windows boot manager) in the bottom. Everything else is on top of it and should boot before it. The DVD won't boot, a USB bootable ISO won't work...When trying to install from a running win8.1, the setup won't let me manage my partitions, a crucial reason for me to want to handle the installation myself.How do I boot things other than the bloatware that came with this PC?
I recently bought a Probook 455 G1 and I would like to create Windows 8 installation media for it. Â However, the setup tool provided by Microsoft doesn't accept the OEM key found by my KeyFinder program. Where to download (unmodified) 64-bit Windows 8 installation media legally?
My Dell Inspiron 1764 laptop will not boot up after using windows 7 installation disc in repair mode, as it has to restart several times during set up, it would not restart after first phase of operation. It never got to finish operation. Now it is just coming up with a black screen saying, Windows boot manager
Windows failed to start. A recent hardware or software change it might be the cause. To fix the problem:
1. insert windows installation disc and restart computer (which it will not let me do)2. choose your language settings  and then click next 3. click repair your computer
if you do not have this disc, contact your system administrator or computer manufacturer for assistance
file: BootBcd
status: 0x000000f
info: an error occurred while attempting to read the boot configuration data
After start up even pressing F8 before logo disappears numerous times it will not let me into that menu, so I cant access start up in safe mode or last known good configuration. No matter what I do it will not go past the above message on screen.
