I just had a D420 replaced By Dell for heating issues- after 4 motherboards- they Gave up and offered a replacement-
Now I got an E4300 and not to thrilled with it any comments about the 4300? did i just get a bad apple. My issues are = poor WIFI pickup.
it came with a 1397g card and i get 4 bars max sitting on top of the router- leave the room and i get 1-2 bars and 1mbs, at the router max is 40mps-
I switch the 5300 card from my e6400 and it does go up to 80 ( 130 in the e6400) but i still get drops - and still see none of the neighbors routers i see on my other machines.
Well, my Nvidia 8400 died for second time and I called Dell to replace it. After asking for a sustainable solution and to ensure me that I won't have the same issue once more, they said that they will install me a new motherboard revision which reduces the possibilities of having my GPU dead.
Thus, they replaced the motherboard. I didn't format my system but kept my Windows Vista Ultimate x64 installation.
After using the system for a couple of hours I realized that the system was under-performing. Then I checked with CPU z utility and found out that the CPU clock was stuck @1,6GHz (although my power scheme was high performance). My processor is the T7500. The system was overheated and the clock speed was reduced (I guess). The thing was that I could almost do nothing, not even surf on the internet. This makes my laptop unable to deal with applications that need lots of CPU power.
Does anybody else face the same problem? Is there something I could do to return to the old situation? Should I contact Dell and complain? It is a huge problem cause half of my applications cannot be used any more!! After a few minutes of use the laptop stops performing normally!
Could it be that if I format my HD and make a fresh install the problem will be resolved? (I repeat that I didn't format my system after the MB replacement).
In general, for screen replacement on a HP business notebook, what is the best option?
1) Ship it back to HP
2) Let a tech replace it onsite
3) Ask for the whole display assembly and replace it myself
I've mostly had Dell business notebooks in the past, so I'm not sure how good HP business repair quality is. I've searched the forums here and found some stories of people not being very happy with their repair quality when it has been sent back to HP and when they've had technicians on site so I was considering just asking for the whole display assembly and then replacing it myself.
I have a Dell Inspiron N4110, which I recently installed a new windows on. I can't seem to connect to the internet. Before the new installation the WIFI worked fine, but now even connecting through ethernet doesn't work. I looked through my Network drivers and there are only two.
I've tried download and installing others but no hope.
I'm running Windows 7 Ultimate on my XPS 1340. I currently have the Dell 1515 Card, which gives me terrible signal quality.
I'll have it 5 feet away from a G router and I get a Poor signal with drops every 5-10minutes. In comparison, both my ipod touch and my blackberry bold get perfect reception even outside my house.
I've tried everything I've seen on this forum and Google, which is basically installing the atheros modded drivers, which doesn't work at all for me (seeing as I can't uninstall the dell drivers, only update over them)
I had replaced mobo on my dead SZ 4 series (don't ask why) and couldn't stop there since I was in the move thus consequently contemplated about possible upgrades. For now I settled for fan, WLAN card and CPU upgrade. If it works well, I might install SSD also.
1.Fan Modification
As you all proud SZ owners know, fan is very noisy on this machines so it made me think if there is any possible modification to reduce the noise. Since the BIOS is controlling it there is not much to do on the RPM part (in win at least, but more on that later) I settled for a fan and fan casing swap from SZ 4 to SZ 7 series.
In the photos you can see that fans, fan casings and heat-sinks are of different design. Besides design differences, voltage and the amperage are the same, 5V-300mA.
Only way was to install the fan and the casing of the SZ 7 heat-sink to my old one as one of the heat-sinks bolt bushings is off for a few millimeters.
There has to be some care exercised when prying off the fan casing, some heating was required from the aluminium side on three pins were casing is attached.
Not to be simple, the difference is also in the inlet hole. One on the SZ 7 heat-sink is bigger and off centre compared to SZ 4s. Had to do some filing there, to match it to the size of the new fan. Fan of SZ7 is not bigger, it is due to different design of the fan eye and its volutes...................
I am aware this is Notebook review but I figure Dell is Dell and it could apply to all Dell branded products.
I ordered a Dell PC 2 weeks ago. It has been 'In Production' for 2 weeks now. I phoned CS today and I was transferred a total 8 times due to no one being able to match my Name with my order number.
I finally get through and they tell me that a part was on back order (i never received any emails about this and no notification on my confirmed order page before I checked out) .....
I just need to verify my sanity by asking you how your Studio XPS 1640 with a t9800@2.93GHz and the 4670 ATI graphics card performs in general. I was playing Left4Dead and now I have the Left4Dead2 demo installed, and it just seems a little glitchy with both of them. I am running it at 1080p and graphics mostly on high, aside from shading and AA is off I believe, but it is still glitchy. The way the game recommends it to be run with my computer's specs is maxed out, however, its far too jerky and slow. Is there something stupid I may be doing wrong? Also, a friend with the studio 15 and a smaller cpu and the lower gpu seems to run it better, albeit on lower settings, but it just seems smoother.
On my new studio 1536 the battery seems a little messed up.
By this I mean that my laptop will be put into sleep mode over night (by me) with 80 or 90% battery, and when I wake up (6 hours later or so) it will be at 8-15%.
Note that this is a NEW battery and has been charged and depleted several times since getting it on may 22nd.
I'm in the process of returning my system (not due to this paint issue) but due to the screen issues/dell's inability to give me a replacement [full story: The continued adventures about a boy and his laptop....
Back to this thread's topic, I have babied this thing and have never dinged this portion of the laptop on anything but the paint still seems to chip away.. does anyone else have anything like this picture?
I have the m1530 and recently got team fortress 2. Have updated BIOS A012, somewhat updated graphics driver 185.85, can't seem to download the 186.06, links are down for Windows XP Pro 32 Bit version. I am running the game at 800*600 and it still lags.
My screen becomes extremely choppy when more than 3 players are on screen at the same time. From what I've gather on other threads,
I tried playing a dvd for the first time (in PowerDVD and Media Player). It's extremely blocky and generally looks like crap. When using it in Hybrid SLI though, the video looks fine. The integrated card should be more than capable of upconverting a DVD so that it doesn't look so horrible. Notice the lip of the counter and see how much blockier it looks in the first picture than the second.
I know when we first got our's we read about the grainy LG Screens and worked hard to avoid it.
Now we are looking to get a replacement system. Has this issue been resolved? Or do we still need to be on the look-out for those bad screens and make a special request not to have the LG ones
It's only since I started reading these forums to try and fix my fans being on all the time that I realised my XPS's battery life was way worse than most people's on here.
I have a six cell battery and out of a full charge I get maybe 1:35. this wouldn't be so bad except, when my warranty ran out 3 months ago, I made dell replace my current six cell battery which got around 1:17 full charge.
This current battery is only 3 months old, initially it did an two hours and a half but now i'm lucky to get an hour and a half out of it.
why my computer is eating my batteries? Other people talk about battery life of 3 hours plus
I have 3 laptops in my house, all use Intel cards. My other halfs D620 gets excellent signal everywhere downstairs but my new XPS 1530 seems to have poor/fair signal all the time.
I know it's not the router as the other laptops are and have been fine for months, I have updated the card to the latest Intel drivers but this didn't help?
Anyway, he has yet to install anything beyond what came with the laptop and he commented that a antivirus scan took 8+ hours to run.
That seemed incredible to me so I went over and we ran a few benchmarks and the results were frighteningly bad.
Using HDTune, the normal curve one sees of a declining arch is rife with drastic spikes all the way through with minimum of 2.2 MB/sec (seems VERY low), and a maximum of 65 MB/sec (normalish).
Additionally, the CPU usage was 11.9 percent, which seems unusually high.
I've just taken my new precision m4400 out of the box and I've already found 2 majour things wrong with it. I'm hoping someone can help me with this.
FIRST: I'm getting very poor graphics performance. Both observed bad windows refresh times and low OpenGL benchmarks using cinebench 10. I've already run windows update and installed the latest nvidia driver.
Initially I was getting an opengl score of ~1500 on cinebench, now i'm getting ~3500 but it is still too low. It should be over 6000 ....
I have been getting really poor hard drive performance since I've got my computer. It's getting a 5.9 on the windows experience index which I think is quite low for an 128GB SSD? Also, when copying and pasting large files it seems to stall for a few seconds during the process.
Has anyone else been having this problem or know a solution? What kind WEI ratings are people getting?
My machine is a SXPS 1645, Core i7 720Q, 4GB RAM, 128GB SSD.
I'm a little sick of sub-par Flash performance on mac. I'm aware of the Adobe-Apple catfight.
Using a mid-2009 15" with a C2D at 2.53 GHz alongside Nvidia's 9400 M, Firefox 3.6.3 on OS X 10.6.3. Flash version is 10.0.45.2 -- the most recent release version. Have tried the 10.1 beta (and newer RC) with little change.
Streaming YouTube vids staggers every minute or two for a few seconds. This is not an issue I've had much, if any, of on a Windows box.
I've tried the about:config suggestion where you extend the time in which Firefox saves its state in case of a crash; still seeing the stuttering. Is this just a Firefox issue? Firefox + Mac issue?
I'd migrate to Chrome / Safari, but both browsers seem to render fonts smaller than Firefox does; Safari has a minimum font limit, but it seems like that's not always respected (or 9-point fonts are much smaller than I'd imagine).
I have a Linksys wrt 150N wireless router that is about a year old. My Rev B MBA is not performing with the speed I had anticipated moving to Wireless N. I was working with Linksys tech support yesterday and pretty much exhausted all options to get speed and range acceptable. I have Comcast cable and my iMac is seeing download speeds shown below hardwired directly into the router.
Using my MBA right next to the router I am barely getting 10% of that throughput. Before I replace the router I was considering a Time Capsule instead of a straight router. Is there anything I can do on the MBA side to remedy this? Is anyone using Time Capsule and getting good results?
One final note I did re flash the firmware on the router and when I reset the router on the first try I get very good speed (14,000KBPS) and thereafter it drops back down to 1200KBPS or so. I am thinking the router is the problem not the Air.
In addition to having a bad hard disk (after less than a year of ownership it totally failed, corrupted data, bla bla bla), the welds on the palm rest screw posts (see picture attachment) have come undone. I have been able to fix this for the time being with krazy glue, but it's not perfect. Furthermore, because of this, the plastic piece on the CD drive side broke at the incredibly flimsy joint with the main carbon chassis. Also fixed for the time being with krazy glue.
The touchpad comes on reversed from time to time, there's a ton of bloatware installed by default, no official 64bit support (although I was able to get it working with help from this forum), bla bla bla. My friends think all of this is hillarious, as I "overpayed" for a Sony that has been a real bear in terms of quality.
I can't complain about the design, weight, battery life, gorgeous screen, or performance however... but the quality issues are canceling out the positives, I'd say overall it's impossible to give the SZ6 a better grade than a B: it's a pleasure to lug around (I'm moving around every day) but the poor quality means you can never relax.
I recently purchased an FW285D and its been great thus far.. I have been noticing issues with the wireless signal however. I have a dell inspirion 9300 also and it uses intel wireless... MY sony however is currently using the vista wireless system but i did see some intel wireless programs lying around.
Anyway basically when im upstairs in the house the internet cuts in and out constantly.. showing my network then saying its not available. 3 Other people use laptops in the house and they have no problems whatsoever including my dell.. I have it sitting beside my sony and it will stay connected while my sony keeps on having to reconnect. Its truly annoying. Its weird because it shows the wireless signal of my neighbours houses at a higher strength than my own connection and also has them ALWAYS up. No one else in my house gets this problem so i doubt it has something to do with my actual wireless router... which is a linksys WRT300N.
Does anyone have any ideas.. Will the intel wireless be better.. if i double click on the .exe file in my common(ifrmework) folder it just says i need to reinstall the program and restart.....
Over the last few months the graphics seem to have deteriorated dramatically, particularly when using the 'speed' mode. The laptop will not play any high definition videos (even with a resolution of just 720p as well!) remotely smoothly, videos which play without a hitch on my 7 year old Pentium 4 with 1gb of ram and 256mb graphics! In fact, graphics and the whole PC itself seem to run much more smoothly when using the 'stamina' setting. This really makes no sense in my mind. It's quite irritating and disappointing since I wanted to be able to attach this laptop to the 42inch plasmascreen with the HDMI cable and watch films!
I upgraded to a new driver to see if it would help (using one of the driver packs made by nautis/dox in the 'discoveries on Vaio Z hybrid graphics' thread) but it has not helped at all, just made the 'stamina' setting even slower!
Will I get around a complete re-instal to factory settings?
