I have the m1530 and recently got team fortress 2. Have updated BIOS A012, somewhat updated graphics driver 185.85, can't seem to download the 186.06, links are down for Windows XP Pro 32 Bit version. I am running the game at 800*600 and it still lags.
My screen becomes extremely choppy when more than 3 players are on screen at the same time. From what I've gather on other threads,
I just need to verify my sanity by asking you how your Studio XPS 1640 with a t9800@2.93GHz and the 4670 ATI graphics card performs in general. I was playing Left4Dead and now I have the Left4Dead2 demo installed, and it just seems a little glitchy with both of them. I am running it at 1080p and graphics mostly on high, aside from shading and AA is off I believe, but it is still glitchy. The way the game recommends it to be run with my computer's specs is maxed out, however, its far too jerky and slow. Is there something stupid I may be doing wrong? Also, a friend with the studio 15 and a smaller cpu and the lower gpu seems to run it better, albeit on lower settings, but it just seems smoother.
View 10 Replies View RelatedThis thing is only a week old.
Anyway, he has yet to install anything beyond what came with the laptop and he commented that a antivirus scan took 8+ hours to run.
That seemed incredible to me so I went over and we ran a few benchmarks and the results were frighteningly bad.
Using HDTune, the normal curve one sees of a declining arch is rife with drastic spikes all the way through with minimum of 2.2 MB/sec (seems VERY low), and a maximum of 65 MB/sec (normalish).
Additionally, the CPU usage was 11.9 percent, which seems unusually high.
I've just taken my new precision m4400 out of the box and I've already found 2 majour things wrong with it. I'm hoping someone can help me with this.
FIRST:
I'm getting very poor graphics performance. Both observed bad windows refresh times and low OpenGL benchmarks using cinebench 10. I've already run windows update and installed the latest nvidia driver.
Initially I was getting an opengl score of ~1500 on cinebench, now i'm getting ~3500 but it is still too low. It should be over 6000 ....
Well, my Nvidia 8400 died for second time and I called Dell to replace it. After asking for a sustainable solution and to ensure me that I won't have the same issue once more, they said that they will install me a new motherboard revision which reduces the possibilities of having my GPU dead.
Thus, they replaced the motherboard. I didn't format my system but kept my Windows Vista Ultimate x64 installation.
After using the system for a couple of hours I realized that the system was under-performing. Then I checked with CPU z utility and found out that the CPU clock was stuck @1,6GHz (although my power scheme was high performance). My processor is the T7500. The system was overheated and the clock speed was reduced (I guess). The thing was that I could almost do nothing, not even surf on the internet. This makes my laptop unable to deal with applications that need lots of CPU power.
Does anybody else face the same problem? Is there something I could do to return to the old situation? Should I contact Dell and complain? It is a huge problem cause half of my applications cannot be used any more!! After a few minutes of use the laptop stops performing normally!
Could it be that if I format my HD and make a fresh install the problem will be resolved? (I repeat that I didn't format my system after the MB replacement).
I have been getting really poor hard drive performance since I've got my computer. It's getting a 5.9 on the windows experience index which I think is quite low for an 128GB SSD? Also, when copying and pasting large files it seems to stall for a few seconds during the process.
Has anyone else been having this problem or know a solution? What kind WEI ratings are people getting?
My machine is a SXPS 1645, Core i7 720Q, 4GB RAM, 128GB SSD.
I'm a little sick of sub-par Flash performance on mac. I'm aware of the Adobe-Apple catfight.
Using a mid-2009 15" with a C2D at 2.53 GHz alongside Nvidia's 9400 M, Firefox 3.6.3 on OS X 10.6.3. Flash version is 10.0.45.2 -- the most recent release version. Have tried the 10.1 beta (and newer RC) with little change.
Streaming YouTube vids staggers every minute or two for a few seconds. This is not an issue I've had much, if any, of on a Windows box.
I've tried the about:config suggestion where you extend the time in which Firefox saves its state in case of a crash; still seeing the stuttering. Is this just a Firefox issue? Firefox + Mac issue?
I'd migrate to Chrome / Safari, but both browsers seem to render fonts smaller than Firefox does; Safari has a minimum font limit, but it seems like that's not always respected (or 9-point fonts are much smaller than I'd imagine).
Installed in my Vaio VGN-Z11XRN solid drive Intel X25-M. In all tests it shows one of the best performance results. 0
It should read up to 220mb/sec and write 70mb/sec. But not in my machine
Bios: hacked R4043
Drive firmware: 2CV102HD
ACHI mode is set.
OS: Windows7 x64
In my case I can see just 150mb/sec maximum.
Where is the bottleneck ?
Tried to test in my stationary comp. Intel P35 in AHCI mode. Read speed was about 200mb/sec
I have owned my Vaio Z21WN/B since april.
Over the last few months the graphics seem to have deteriorated dramatically, particularly when using the 'speed' mode. The laptop will not play any high definition videos (even with a resolution of just 720p as well!) remotely smoothly, videos which play without a hitch on my 7 year old Pentium 4 with 1gb of ram and 256mb graphics! In fact, graphics and the whole PC itself seem to run much more smoothly when using the 'stamina' setting. This really makes no sense in my mind. It's quite irritating and disappointing since I wanted to be able to attach this laptop to the 42inch plasmascreen with the HDMI cable and watch films!
I upgraded to a new driver to see if it would help (using one of the driver packs made by nautis/dox in the 'discoveries on Vaio Z hybrid graphics' thread) but it has not helped at all, just made the 'stamina' setting even slower!
Will I get around a complete re-instal to factory settings?
My m1530 battery life is very poor, im only getting around 40mins unplugged, Im not running power-sucking tasks either,
i just use internet and msn messenger when im unplugged. I switched to the power-saving plan and its not really making any difference.
Its so annoying now does anyone know what could potentially be the problem?
I'm wondering about certain aspects of the notebook. I know, this laptop wasn't designed for gaming. It's more of a multimedia notebook, which is why bought it.
Though, I'm also trying to get some games for PC. Youtube videos show this laptop runs very good latest games, like Street Fighter IV, Resident Evil 5, Call of Duty: WaW-MW-MW2, Far Cry 2, Unreal Tournament III, etc.
Just wondering if someone could tell me what kind of fps they are getting or their experience so far with the ATI Mobility 4570 (256MB/512MB) and which games run fluently it would be greatly appreciated. Games such as:
View 3 Replies View RelatedI have a Dell XPS 15 (L521x) laptop. While gaming my GPU heats up to temperatures ranging from 73 to 77 degrees Celsius (NOTE: This is with a CM Storm SF-19 cooling pad).Â
My question is how else can I reduce this heat because I know as it gets hotter it throttles back to avoid crashing, thus decreasing performance.
Here are specs of everything:Model - Dell XPS 15 (L521x)OS- Windows 7 64-bitCPU - Intel Core i7-3632QMBIOS - A13 (Up to date)SSD - 128GB (OS is on this, 30GB free)HDD - 1TB (300GB free)RAM - 16GBGPU - Nvidia GT 640MDrivers for EVERYTHING (including my graphics card) are up to date.CM Storm SF-19 Gaming Laptop Cooling Pad with two 140mm Turbine Fans (1200-2600 RPM's, I always keep it at max blast)
Using software program, Open Hardware Monitor (and having my cooling pad on max blast), I have retrieved the following data:~ My CPU idles around 60 degrees Celsius and can max around 70 degrees Celsius~ My GPU idles around 44 degrees Celsius and can max around 77 degrees CelsiusMy room temperature varies from 10-20 degrees Celsius (50-65 degrees Fahrenheit)I had this laptop since July of 2012 and I had just had my motherboard swapped (GPU was integrated), heat sink re-seated, and cleaned of dust (wasn't really any in there). It was under warranty (and still is).
I have a Dell Studio XPS 1645 laptop, 1.73 GHz Intel Core i7 CPU, 4G RAM, Windows 7 64-bit O/S, ATI Mobility Radeon HD 4670 video card.
Among other things, I'm using this computer for gaming. I play Lord of the Rings Online and World of Warcraft. They both run very erratically on this computer in terms of frames per second. They may run at 60 fps for half an hour, then throttle back to 1-2 fps for half an hour, and it's nearly impossible to play these games at 1-2 fps.Â
I recently downloaded the new BIOS patch and acquired the 130W power supply, which were supposed to be related to similar performance issues, but they did not seem to make any difference. There is no question that the computer gets quite hot when running these games, but even when hot it will suddenly work properly for half an hour before going painfully slow again. I close all other applications when running these games, and I do have McAfee firewall running in the background.
What gets me is how this problem seems to "throttle" - sometimes it works perfectly and other times it's painful. This tells me that the system has the specs and horsepower to play these games - something else must be happening.
Title says all...I am not a hardcore gamer,just want to "relax" sometimes...so,can you post couple of FPS numbers for different games?
View 10 Replies View RelatedI have a M1730 with 8700gt sli GPU's. My problem is that, if i turn on the notebook and start playing a newish game,
it will run great for 20 mins or so, then its performance will drop dramatically, to the point of not being able to play due to framerate drop.
My instincts tell me that it is a heat problem, beacuse if i turn it off and leave it for a bit, i can turn it back on and play fine again.
I'm on a dell inspiron N5110 laptop, 6gb installed ram, Intel core i5-2430m processor, intel HD graphics 3000. When I play games like Planetside 2 I have to turn it on low and the render quality to the lowest setting, and turn shadows off and I still get bad fps 20-40. What i'm wondering is there anyway through settings I can boost the gaming performance to the point where it runs fine on low to medium. Or is there an external/internal graphics card for under 100 bucks I can buy to boost the performance. I also have all my Intel and I believe dell drivers up to date.
View 6 Replies View RelatedI have Dell 7720 17r SE for almost a year now,I remember it as a fine gaming rig.I used to play Dead Island, Fallout New Vegas on max settings and resolutions,But ever since the latest A13 BIOS upgrade and the new 314.22 Nvidia Driver.
I noticed a significant drop in performance. Almost every game started to lag when the action becomes too "crowded" (lots of enemies etc).
And as for Dead island I noticed the performance drop after 20min of play.Not sure about overheating. (It seems like the usual temp if not maybe a Celsius hotter)Â
Noticed gaming performance drop after updating the bios and latest GPU driver???
I'm getting the Acer Aspire 5920G LX.AQB0X.612 and was wondering if anyone here has it and is willing to comment about its gaming performance. I'm talking about the likes of HL2, UT2004, COD2 etc. Fairly old games, not Crysis or anything.
View 4 Replies View RelatedI am pretty much deciding between keeping my macbook pro (in sig) and upgrading to an imac 24" with the ati 4850. With student discount it would cost me 1879 + tax. I just dont know if its worth it for me. Most all the pc games i own can be maxed on the pro,Save for world in conflict, crysis, and some others (about 5). My 360 gets most of my gaming time anyway. I just am thinking that it would be great to have the extra power in the 4850 for some of my current titles and having power for future titles would be nice. Also who couldnt use more speed for final cut express and such.
One game that annoys me on my macbook pro is Unreal 3. It is an amazingly graphical game. The new patch enables comprehesive settings adjustment. The thing that bothers me is that I can max it but fps drops by 65% on the water level. I want a card that wont have problems like this. Im not expecting wonders with the 4850, i would still use the modpacks for crysis, and run WiC in DX9.
However am i just missusing the macbook pro? What windows operating system runs smoothest on it? I have tried xp 32 bit and noticed some glitches with the led keyboard and such. Would 64 bit be the better option? Would upgrading the ram help at all? Im pretty convinced it wouldnt because as for vram i got double the ram compared to most people with the macbook pro, and still notice about the exact same performace. Also drivers? I never even touched or looked at the drivers? How do install drivers on a mac? Do i just go to nvidia's site on windows? If i erase the bootcamp partiiton will it delete the drivers? Will it conflict with leopard?
I've been hearing good things about CrossOver from a few people and wondered if anyone here could recommend it. Normally I just game under boot camp, but apparently this program allows you to game at full speed under OS X. Any truth to this? What kind of performance would I be looking at with a 9600M GT?
View 7 Replies View RelatedI have a Inspiron N4110 and I was wondering if I could upgrade or change my specs to increase gaming performance.
HERE ARE MY SPECS:
Windows 7 Home premium 64-Bit (6.1, Build7 7601)Processor: Intel(R) Core(TM) i3-2350M CPU @ 2.30GHz (4 CPUs), ~2.3GHz6144 MB RAMDirectx 11Intel(R) HD Graphics family32-bit Right now
I have a Dell Inspiron N5110. After two years, my laptop starts to have reduced performance in gaming and watching streaming videos. I did a factory reset. Everything seems fine.Â
I did a test by installing Warcraft 3 which I played with no lag at all. After that, I started to install/ update the Graphic drivers, Windows updates and installed Starcraft 2.
Then I played Warcraft 3 to test the performance and it lags like for every 2 seconds in game.Â
Please note that I test my system by playing WC3 after installing the following individual items:
Item 1: Graphics driver
Item 2: Windows updates
Item 3: Starcraft 2Â
Please note that I did three (3) factory resets.
This means I install WC3 and played and there is no lags. When i do Item 1, WC3 lags.Â
This means I install WC3 and played and there is no lags. When i do Item 2, WC3 lags.Â
This means I install WC3 and played and there is no lags. When i do Item 3, WC3 lags.Â
 Please note that I did a hardware diagnostic test and I pass all the tests.Â
I also did played around with:Â
1) Power SettingsÂ
2) Nvidia Control Settings and used the my graphic card instead of integrated video card.
But I am still facing the lag.Â
At the moment, I am using my laptop at the factory settings and not installing any drivers or updates.Â
I'm wondering if my fan is working right. I can definitely hear it, and Hardware Monitor has it go up to 4000rpm.
View 5 Replies View RelatedI have a XPS m1530, core 2 duo T5550 1,83 Ghz, 3gbram, 160 hdd, . I have a question .
Isn't my score from my ram too low?
DIMM1 Nanya 1Gb
DIMM3 Samsung 2Gb
DDr2 667 (333 Mhz)
I own a dell m1530 and I've recently had a framerate problem while playing games where the frame rate is just plain unstable. (I noticed it about a month ago, wasn't like this when I first got the computer)
I've tried updating BIOS, getting most recent video drivers/reverting back to old, restoring system to factory state, lowering ingame settings to minimum etc.
It happens with every single game I play - I'll be at 100 fps for a few seconds then ill drop to 50 fps for a few seconds and back to 100 and so on. Same with games I run at lower framerates - I'll be at 40 fps then 20 then 40 etc.
personally, 9500m is tempting not sure if it's better than 8600m gt even nvidia's site states that 9500m 8600m's successor,
but it's GS...
and by the way why why why dell had to use an ATI card for xps studio 16 and used the nvidia card in xps studio 13
I've recently starting playing Civilization 4: Beyond the Sword again, and my computer (stats listed in my signature) has started to shut down, I'm presuming from overheating.
I downloaded CPUID hardware monitor and those are my web-surfing/idling temps. This bad boy can get very hot. I only just realized a few moments ago that my fan does not often speed up to max.
Unfortunately, I don't have the extended Dell warranty, and since I bought this in 2007,
Will I have to take it apply and reapply thermal paste?
What utility can I use to test the fan to ensure that it's working properly?
I am aware this is Notebook review but I figure Dell is Dell and it could apply to all Dell branded products.
I ordered a Dell PC 2 weeks ago. It has been 'In Production' for 2 weeks now. I phoned CS today and I was transferred a total 8 times due to no one being able to match my Name with my order number.
I finally get through and they tell me that a part was on back order (i never received any emails about this and no notification on my confirmed order page before I checked out) .....
On my new studio 1536 the battery seems a little messed up.
By this I mean that my laptop will be put into sleep mode over night (by me) with 80 or 90% battery, and when I wake up (6 hours later or so) it will be at 8-15%.
Note that this is a NEW battery and has been charged and depleted several times since getting it on may 22nd.