Dell :: XPS M1330 Poor Performance After Motherboard Replacement
Sep 24, 2009
Well, my Nvidia 8400 died for second time and I called Dell to replace it. After asking for a sustainable solution and to ensure me that I won't have the same issue once more, they said that they will install me a new motherboard revision which reduces the possibilities of having my GPU dead.
Thus, they replaced the motherboard. I didn't format my system but kept my Windows Vista Ultimate x64 installation.
After using the system for a couple of hours I realized that the system was under-performing. Then I checked with CPU z utility and found out that the CPU clock was stuck @1,6GHz (although my power scheme was high performance). My processor is the T7500. The system was overheated and the clock speed was reduced (I guess). The thing was that I could almost do nothing, not even surf on the internet. This makes my laptop unable to deal with applications that need lots of CPU power.
Does anybody else face the same problem? Is there something I could do to return to the old situation? Should I contact Dell and complain? It is a huge problem cause half of my applications cannot be used any more!! After a few minutes of use the laptop stops performing normally!
Could it be that if I format my HD and make a fresh install the problem will be resolved? (I repeat that I didn't format my system after the MB replacement).
View 10 Replies
ADVERTISEMENT
Sep 24, 2008
So My M1330 was part of the defective batches of Nvidia Video card. A dell tech guy came and replace the motherboard and also a defective battery. I assume that the hard drive would work the same and I assumed I didn't need to format. My current hard drive was just taking forever to boot up, and was just so slow. I figure i needed to reformat.
I used a new 320GB hard drive i was planning to replace the current drive with. Now that its fully formatted. It's still unbelievable slow. I though the speed step might not be working current but i used wcpuid to test the current speed and it was at full speed. Though the system doesn't seem hot at all. I just cant figure out why its so slow. bios is currently at A12 which is the lastest
View 10 Replies
View Related
Nov 10, 2009
I just need to verify my sanity by asking you how your Studio XPS 1640 with a t9800@2.93GHz and the 4670 ATI graphics card performs in general. I was playing Left4Dead and now I have the Left4Dead2 demo installed, and it just seems a little glitchy with both of them. I am running it at 1080p and graphics mostly on high, aside from shading and AA is off I believe, but it is still glitchy. The way the game recommends it to be run with my computer's specs is maxed out, however, its far too jerky and slow. Is there something stupid I may be doing wrong? Also, a friend with the studio 15 and a smaller cpu and the lower gpu seems to run it better, albeit on lower settings, but it just seems smoother.
View 10 Replies
View Related
Jun 12, 2009
I have the m1530 and recently got team fortress 2. Have updated BIOS A012, somewhat updated graphics driver 185.85, can't seem to download the 186.06, links are down for Windows XP Pro 32 Bit version. I am running the game at 800*600 and it still lags.
My screen becomes extremely choppy when more than 3 players are on screen at the same time. From what I've gather on other threads,
View 10 Replies
View Related
Jan 5, 2009
This thing is only a week old.
Anyway, he has yet to install anything beyond what came with the laptop and he commented that a antivirus scan took 8+ hours to run.
That seemed incredible to me so I went over and we ran a few benchmarks and the results were frighteningly bad.
Using HDTune, the normal curve one sees of a declining arch is rife with drastic spikes all the way through with minimum of 2.2 MB/sec (seems VERY low), and a maximum of 65 MB/sec (normalish).
Additionally, the CPU usage was 11.9 percent, which seems unusually high.
View 5 Replies
View Related
Aug 26, 2009
I've just taken my new precision m4400 out of the box and I've already found 2 majour things wrong with it. I'm hoping someone can help me with this.
FIRST:
I'm getting very poor graphics performance. Both observed bad windows refresh times and low OpenGL benchmarks using cinebench 10. I've already run windows update and installed the latest nvidia driver.
Initially I was getting an opengl score of ~1500 on cinebench, now i'm getting ~3500 but it is still too low. It should be over 6000 ....
View 10 Replies
View Related
Feb 23, 2010
I have been getting really poor hard drive performance since I've got my computer. It's getting a 5.9 on the windows experience index which I think is quite low for an 128GB SSD? Also, when copying and pasting large files it seems to stall for a few seconds during the process.
Has anyone else been having this problem or know a solution? What kind WEI ratings are people getting?
My machine is a SXPS 1645, Core i7 720Q, 4GB RAM, 128GB SSD.
View 10 Replies
View Related
Apr 15, 2010
I'm a little sick of sub-par Flash performance on mac. I'm aware of the Adobe-Apple catfight.
Using a mid-2009 15" with a C2D at 2.53 GHz alongside Nvidia's 9400 M, Firefox 3.6.3 on OS X 10.6.3. Flash version is 10.0.45.2 -- the most recent release version. Have tried the 10.1 beta (and newer RC) with little change.
Streaming YouTube vids staggers every minute or two for a few seconds. This is not an issue I've had much, if any, of on a Windows box.
I've tried the about:config suggestion where you extend the time in which Firefox saves its state in case of a crash; still seeing the stuttering. Is this just a Firefox issue? Firefox + Mac issue?
I'd migrate to Chrome / Safari, but both browsers seem to render fonts smaller than Firefox does; Safari has a minimum font limit, but it seems like that's not always respected (or 9-point fonts are much smaller than I'd imagine).
View 10 Replies
View Related
Dec 14, 2009
One of my mates has a dead M1330. I told him about the "oven" trick but his wife might hurt the both of us. It is however possible to replace the motherboard with the integrated X3100 motherboard correct?
View 10 Replies
View Related
Jan 26, 2010
Installed in my Vaio VGN-Z11XRN solid drive Intel X25-M. In all tests it shows one of the best performance results. 0
It should read up to 220mb/sec and write 70mb/sec. But not in my machine
Bios: hacked R4043
Drive firmware: 2CV102HD
ACHI mode is set.
OS: Windows7 x64
In my case I can see just 150mb/sec maximum.
Where is the bottleneck ?
Tried to test in my stationary comp. Intel P35 in AHCI mode. Read speed was about 200mb/sec
View 8 Replies
View Related
Jul 16, 2009
I have owned my Vaio Z21WN/B since april.
Over the last few months the graphics seem to have deteriorated dramatically, particularly when using the 'speed' mode. The laptop will not play any high definition videos (even with a resolution of just 720p as well!) remotely smoothly, videos which play without a hitch on my 7 year old Pentium 4 with 1gb of ram and 256mb graphics! In fact, graphics and the whole PC itself seem to run much more smoothly when using the 'stamina' setting. This really makes no sense in my mind. It's quite irritating and disappointing since I wanted to be able to attach this laptop to the 42inch plasmascreen with the HDMI cable and watch films!
I upgraded to a new driver to see if it would help (using one of the driver packs made by nautis/dox in the 'discoveries on Vaio Z hybrid graphics' thread) but it has not helped at all, just made the 'stamina' setting even slower!
Will I get around a complete re-instal to factory settings?
View 10 Replies
View Related
Mar 25, 2010
I just had a D420 replaced By Dell for heating issues- after 4 motherboards- they Gave up and offered a replacement-
Now I got an E4300 and not to thrilled with it any comments about the 4300? did i just get a bad apple. My issues are = poor WIFI pickup.
it came with a 1397g card and i get 4 bars max sitting on top of the router- leave the room and i get 1-2 bars and 1mbs, at the router max is 40mps-
I switch the 5300 card from my e6400 and it does go up to 80 ( 130 in the e6400) but i still get drops - and still see none of the neighbors routers i see on my other machines.
View 4 Replies
View Related
Nov 6, 2009
It's only since I started reading these forums to try and fix my fans being on all the time that I realised my XPS's battery life was way worse than most people's on here.
I have a six cell battery and out of a full charge I get maybe 1:35. this wouldn't be so bad except, when my warranty ran out 3 months ago, I made dell replace my current six cell battery which got around 1:17 full charge.
This current battery is only 3 months old, initially it did an two hours and a half but now i'm lucky to get an hour and a half out of it.
why my computer is eating my batteries? Other people talk about battery life of 3 hours plus
View 10 Replies
View Related
Feb 9, 2009
After some issues i had with my GPU, Dell agreed to replace both my Heatsink and Motherboard, and i wanted to ask those who have had replacements in the past; has anything changed since july 2008? (when i bought my m1530)
have they improved the heatsink, or even changed it? ( i got the aluminum one, crappy piece of engineering right there )
and im sure the GPU issues are still present, but do they run cooler now ?
im asking this because in July the "defective Nvidia GPUs" were still in the dark, and the news about them was a mere rumor...
View 10 Replies
View Related
Apr 22, 2010
I am getting my 1640's motherboard and lcd screen replaced tommorw (dell are taking laptop into the centre). I have the 512mb Ati card, I understand the new motherboard has a 1gb card.
What are the chances I will get the new motherboard and hence the new card? Or will they still have the old motherboard replacements?
View 5 Replies
View Related
Mar 10, 2010
After a completely useless representative walked me in circles, then called me back once we got disconnected and left a 3 second message full of background noise I decided to go ahead and try out another representative.
This one was more useful, I told him about how the computer was underclocking when I was playing games and was running hot in general, and he suggested that we replace the motherboard, heatsink, and fan assemblies.
I had read about a power adapter possible being the issue but that wasn't offered so hopefully this first major surgery allows me to play games again
View 5 Replies
View Related
May 26, 2010
My 6920G went down a few days ago, I sent it to local computer store to have it diagnosed. It turned out that they say it is a mobo issue and said that it would cost aroun 400 to get a new mobo + labour fee.
I don't have any warranty on theis laptop, and the 1 year warranty by the manufacturer has expired. I am just wondering if I can order the mobo fron Acer and maybe replace it on my own.... I don't know which would be better, to have the guys at the store do it for me or phone Acer....
View 10 Replies
View Related
Sep 9, 2009
to start off I updated my vid drivers to the most recent nvidia driver and it has been downhill from that point! When i boot up it shows bars on the screen and will not load windows so i shutdown and load using safe mode which starts right up but still has red artifacts on the screen, i then uninstall the nvidia driver and reboot windows now it loads up properly still has the red artifacts though. So now it is using a standard vga driver then i install a different nvidia driver and get the same problems
I fear i may need a new mboard, would i be able to fit a better mboard/gpu in this chassis if it turns out my gpu is dead? think this may fall under a recall or something?
View 10 Replies
View Related
Nov 25, 2009
I used to use my eSATA port every day with a few different devices. I started to have an overheating problem, so Dell replaced the motherboard and graphics card yesterday.
Of course, that means I lost all my BIOS settings. I'm pretty sure I have them back to where they should be (RAID mode on the SATA controller, eSATA port enabled), yet the eSATA port doesn't see a damned thing connected to it.
Every other piece of hardware is exactly the same as it was before. Any ideas as to what I might be missing?
View 6 Replies
View Related
Dec 1, 2012
I just replaced the motherboard in a Dell Inspiron 1440. The last step in the Dell Service Manual is to enter the correct Service Tag within BIOS. When I started it up and hit F2 and the section with the service tag could not be changed. Is there another way of changing the service tag to the correct one.
View 8 Replies
View Related
Oct 31, 2009
I have a 1 year and 10 month old Acer Aspire 9300 laptop and the motherboard recently bit the dust. My retailer in Gananoque Ontario could not find a replacement. I called Acer which took forever to get to someplace where I could leave a message. I received no reply. After you've called once it's impossible to call again. I guess their answering machine recognizes my phone number and then asks questions that makes it impossible to get through. I sent a detailed explanation of my problem by email 3 times asking a few simple questions, the most important being 1) where can I send the laptop to be repaired? 2) do you sell replacement motherboards and if so how can I buy one? Am I asking too much or getting too technical for them? I've been trying for several weeks now to contact Acer to no avail. What kind of an idiot company is this? A techie put me onto a company called Grand Tech in Richmond Hill Ontario that can replace the motherboard on an exchange basis but the replacement will likely be a repaired one.
Someone told me that the problem I have with the motherboard is common and it is because the solder used at least when mine was made was of poor quality. I hope that problem has been resolved. I'm afraid a repaired replacement my have the same problem. Some people just say to trash it and get a new on which I did. I bought a Dell Inspiron 17 which is supposed to arrive on Nov 11. I would however like to repair the Acer if it can be done cheaply and use it to replace my 8 year old PC in the rec room.
View 10 Replies
View Related
Sep 10, 2009
My friend has a dv9000 laptop, and gpu on motherboard is dead, so he has to replace whole motherboard. I was looking through ebay and i found one silly thing, i can see that some motherboards are used for DV6000 series and also for dv9000. For instance 441534-001 motherboard can be replaced and used on bought laptops. So my question is are all motherboards replacable or just few of them as one mentioned above? We were thinking of buying one with intel cpu, cause now he has AMD.
View 4 Replies
View Related
Mar 3, 2009
Where can I purchase replacement parts for the dv5t motherboard without spending an arm or a leg. I spilled coffee on the and now it's pretty much toast. It won't even start up.
View 10 Replies
View Related
Aug 16, 2009
I recently bought the XPS M1330 from a friend and wasn't familiar with the current issues caused by the nVidia GeForce 8400M GS. Lately, I've been looking for a solution to the problem...
I was reading about the Cooper Mod in another thread and it just seems like a temporary fix...
So, I was wondering has anyone tried manually installing the Intel version of the motherboard, since it seems to have no overheating problems. Has anyone tried a different motherboard to fix the overheating?
View 5 Replies
View Related
Jan 30, 2009
Has anybody on here with the Intel GMA X3100 had a failed motherboard on the M1330? I have searched the forums, and while the Nvidia equipped models seem to be prone to it, I've not had any luck finding info on failed Mobo's on laptops with intergrated graphics. Two months out of warranty too.
also, If i jam a big hard drive into the machine, how would that affect cooling/battery life? I'm sure is its a noob question but i've only ever stripped desktops.
View 5 Replies
View Related
Jul 22, 2009
It was probably the heat, but during some intensive video editing my M1330 shut off in an instant and would not turn on, battery nor a/c.
When I plugged the adapter into the laptop, the light on the adapter went off.
The tech came and replaced the MD (second time, first was Oct.2008).
The tech said if it happens again, I could request an additional/upgrade heat-sink/fan, not really sure.
View 3 Replies
View Related
Jul 13, 2009
How you would you rate ( 1% to 100% ) the Dell XPS M1330 in terms of the following:
1-Durability
2-Workmanship
3-Looks
4-Performance
View 7 Replies
View Related
Feb 7, 2009
Had some build quality issues with my original M1330 that I finally decided to take care of last month (plastic is warped/not glued down in places).
Now when I log into the Dell Support page with said dispatch # all I see is as follows
View 8 Replies
View Related
Feb 5, 2009
My M1330 has developed the "ac adapter type unrecognised" problem which means a new mobo. But it may be. It's an early m1330 with the 633MHz FSB and 2.2GHz cpu.
Do you think Dell will be able to replace like with like? I'm rather hoping they'll give me a 2.4GHz with 800MHz FSB as replacement as that's the nearest CPU match without giving me something inferior.
View 10 Replies
View Related
Nov 14, 2008
seeing as I'm getting ready for my 1330's second Mobo replacement, I've made a list of what to check after a mobo replacement. The first part of the checklist is what you really should test while the RegGuy's still on location and the second & third parts are what you need to verify (in most part) that the replacement mobo is indeed ok.
What the rep will check on your behalf is that the Notebook fires up and loads your OS. This of course implies that the power-on switch, monitor, hard drive, keyboard and trackpad are connected and that the main chips (cpu, graphics, chipset, audio, etc) are indeed functioning.
But that's about it so the rest is up to you ...
View 9 Replies
View Related
