After some issues i had with my GPU, Dell agreed to replace both my Heatsink and Motherboard, and i wanted to ask those who have had replacements in the past; has anything changed since july 2008? (when i bought my m1530)
have they improved the heatsink, or even changed it? ( i got the aluminum one, crappy piece of engineering right there )
and im sure the GPU issues are still present, but do they run cooler now ?
im asking this because in July the "defective Nvidia GPUs" were still in the dark, and the news about them was a mere rumor...
I am getting my 1640's motherboard and lcd screen replaced tommorw (dell are taking laptop into the centre). I have the 512mb Ati card, I understand the new motherboard has a 1gb card.
What are the chances I will get the new motherboard and hence the new card? Or will they still have the old motherboard replacements?
After a completely useless representative walked me in circles, then called me back once we got disconnected and left a 3 second message full of background noise I decided to go ahead and try out another representative.
This one was more useful, I told him about how the computer was underclocking when I was playing games and was running hot in general, and he suggested that we replace the motherboard, heatsink, and fan assemblies.
I had read about a power adapter possible being the issue but that wasn't offered so hopefully this first major surgery allows me to play games again
Well, my Nvidia 8400 died for second time and I called Dell to replace it. After asking for a sustainable solution and to ensure me that I won't have the same issue once more, they said that they will install me a new motherboard revision which reduces the possibilities of having my GPU dead.
Thus, they replaced the motherboard. I didn't format my system but kept my Windows Vista Ultimate x64 installation.
After using the system for a couple of hours I realized that the system was under-performing. Then I checked with CPU z utility and found out that the CPU clock was stuck @1,6GHz (although my power scheme was high performance). My processor is the T7500. The system was overheated and the clock speed was reduced (I guess). The thing was that I could almost do nothing, not even surf on the internet. This makes my laptop unable to deal with applications that need lots of CPU power.
Does anybody else face the same problem? Is there something I could do to return to the old situation? Should I contact Dell and complain? It is a huge problem cause half of my applications cannot be used any more!! After a few minutes of use the laptop stops performing normally!
Could it be that if I format my HD and make a fresh install the problem will be resolved? (I repeat that I didn't format my system after the MB replacement).
So My M1330 was part of the defective batches of Nvidia Video card. A dell tech guy came and replace the motherboard and also a defective battery. I assume that the hard drive would work the same and I assumed I didn't need to format. My current hard drive was just taking forever to boot up, and was just so slow. I figure i needed to reformat.
I used a new 320GB hard drive i was planning to replace the current drive with. Now that its fully formatted. It's still unbelievable slow. I though the speed step might not be working current but i used wcpuid to test the current speed and it was at full speed. Though the system doesn't seem hot at all. I just cant figure out why its so slow. bios is currently at A12 which is the lastest
My 6920G went down a few days ago, I sent it to local computer store to have it diagnosed. It turned out that they say it is a mobo issue and said that it would cost aroun 400 to get a new mobo + labour fee.
I don't have any warranty on theis laptop, and the 1 year warranty by the manufacturer has expired. I am just wondering if I can order the mobo fron Acer and maybe replace it on my own.... I don't know which would be better, to have the guys at the store do it for me or phone Acer....
to start off I updated my vid drivers to the most recent nvidia driver and it has been downhill from that point! When i boot up it shows bars on the screen and will not load windows so i shutdown and load using safe mode which starts right up but still has red artifacts on the screen, i then uninstall the nvidia driver and reboot windows now it loads up properly still has the red artifacts though. So now it is using a standard vga driver then i install a different nvidia driver and get the same problems
I fear i may need a new mboard, would i be able to fit a better mboard/gpu in this chassis if it turns out my gpu is dead? think this may fall under a recall or something?
I used to use my eSATA port every day with a few different devices. I started to have an overheating problem, so Dell replaced the motherboard and graphics card yesterday.
Of course, that means I lost all my BIOS settings. I'm pretty sure I have them back to where they should be (RAID mode on the SATA controller, eSATA port enabled), yet the eSATA port doesn't see a damned thing connected to it.
Every other piece of hardware is exactly the same as it was before. Any ideas as to what I might be missing?
I just replaced the motherboard in a Dell Inspiron 1440. The last step in the Dell Service Manual is to enter the correct Service Tag within BIOS. When I started it up and hit F2 and the section with the service tag could not be changed. Is there another way of changing the service tag to the correct one.
I have a 1 year and 10 month old Acer Aspire 9300 laptop and the motherboard recently bit the dust. My retailer in Gananoque Ontario could not find a replacement. I called Acer which took forever to get to someplace where I could leave a message. I received no reply. After you've called once it's impossible to call again. I guess their answering machine recognizes my phone number and then asks questions that makes it impossible to get through. I sent a detailed explanation of my problem by email 3 times asking a few simple questions, the most important being 1) where can I send the laptop to be repaired? 2) do you sell replacement motherboards and if so how can I buy one? Am I asking too much or getting too technical for them? I've been trying for several weeks now to contact Acer to no avail. What kind of an idiot company is this? A techie put me onto a company called Grand Tech in Richmond Hill Ontario that can replace the motherboard on an exchange basis but the replacement will likely be a repaired one.
Someone told me that the problem I have with the motherboard is common and it is because the solder used at least when mine was made was of poor quality. I hope that problem has been resolved. I'm afraid a repaired replacement my have the same problem. Some people just say to trash it and get a new on which I did. I bought a Dell Inspiron 17 which is supposed to arrive on Nov 11. I would however like to repair the Acer if it can be done cheaply and use it to replace my 8 year old PC in the rec room.
My friend has a dv9000 laptop, and gpu on motherboard is dead, so he has to replace whole motherboard. I was looking through ebay and i found one silly thing, i can see that some motherboards are used for DV6000 series and also for dv9000. For instance 441534-001 motherboard can be replaced and used on bought laptops. So my question is are all motherboards replacable or just few of them as one mentioned above? We were thinking of buying one with intel cpu, cause now he has AMD.
Where can I purchase replacement parts for the dv5t motherboard without spending an arm or a leg. I spilled coffee on the and now it's pretty much toast. It won't even start up.
After replacing the fan, I have a power up issue with the laptop. Basically, the laptop will only power on with the power cable disconnected at the motherboard. It was by mistake that after the fan was replaced and everything was put back together, that I noticed that the battery was not charging. Â I then reopened the machine and reconnected the power cable to the motherboard and nothing - no power. Â When plugging in the power source with the battery in place, the LED adjacent to the power socket lights up WHITE then stays ORANGE and will not power up. No other lights, no fan noise, nothing. Â If I remove the battery, the LED adjacent to the power socket lights up WHITE and stays white however will not power up either. Same agin, no other LEDs, not fan noise, nothing. Â I have now opened the machine back up and disconnected the power from the motherboard. Put it all back together and the laptop powers up as normal with the battery and it works fine. (Well until the battery runs out anyway).
One of my mates has a dead M1330. I told him about the "oven" trick but his wife might hurt the both of us. It is however possible to replace the motherboard with the integrated X3100 motherboard correct?
I have xps gen 2 with a faulty video card and i was wondring if its possible to replace the motherboard with M1710 motherboard so i can fit my 7900 gs video card in it and put all the other hardware parts for the xps gen2 motherboard to the M1710 motherboard in the XPS Gen2 palmrest ... so can u please give me some hints if its possible to do it or not,so basiclly its replacing a motherboard and putting all the old part in the new 1 ..
does anyone have a burnt motherboard for a m1730 that they would either donate or sell very cheaply i am in need of some connectors and i dont wanna buy a good mobo on ebay for 150+ just to scrap it
Pentium M 760 2Ghz 1Gb Ram 60Gb HDD Geforce Go 7800GTX 256mb 17" WUXGA Windows Media Center 2005
I was playing CS:S, and all of a sudden i was getting artifacts on the display. Than the computer froze up and i had to power the laptop down manually.
I was able to restart the computer in safe mode a couple times.
But wow when i try to restart the computer, i'm getting artifacts on the Dell Splash screen. And then it would freeze up.
What do you think the issue is? At first i was thinking the GPU is the problem. But now i'm beginning to think its the motherboards.
I have recently put an M1710 LCD screen cover on my I9400, and the palmrest with the XPS logo in it.
I saw while I had my system apart my motherboard has the solder joints on it for the plugs for the LED's but no plugs for them(has them at the front for the speakers, next to the fans and next to the connection for the monitor).
Is it possible to solder the plugs on, will they work ?? I guess I will need a new BIOS for them ? anyone done it. Would appreciate any info/help. what plugs are they ?
Also is the XPS logo in the touchpad controlable ? mine isn't working at the moment (it's plugged in and was bought second hand but supposidly working ?) anyone know. I know others have done this mod.
I bought a Dell XPS from a friend of mine and the motherboard packed it in, what kind of motherboard is in the XPS 1710. I want to buy one so I can get this machine up and running again.
The motherboard on my XPS M1330 needs replacing for the second time. First time it was replaced under warranty, but my system is now out of warranty so I'm going to replace it myself.
I phoned Dell and they're charging €400 for a replacement but I can get it cheaper if I knew the Dell part number. I have the NVIDIA 8400M GS.
From doing some research, here are some part numbers for motherboards for XPS M1330's:
PU073 GM848 CX062 D057F K984J
How can I check my existing motherboard's part number to ensure I order the correct part?
Dell has replaced my SXPS 16s motherboard thrice in order to solve my overheating issues and some usb errors in the diagnostics and each time i have noticed that my motherboard has been downgraded.
The initial one was an A02, replaced by an A02 (new), replaced by an A01 (new), and then replaced by an A00 (refurbed).
All this hassle never solved my problems but introduced a new one - the sound latency issue. I just play a song in WMP and start browsing and the sound crackles and pops so badly that I feel like bloody throwing this thing out of the window, although I cant coz its darn expensive
Has been soo long since I post anything on this great forum! I appreciate everyone's time here, and thank you all for taking some time to help me diagnose this problem. Anyways here is the problem: I bought a "broken" Dell M1210 from ebay. The cosmetics of the laptop looks very good: no dents, few scratch marks, and almost no blemishes. It did not came with a hard drive, only an AC adapter. Currently, I am trying to transfer ownership to me and will be trying to buy warranty for my m1210 once the transfer is complete. My m1210 is a little more then 1 month out of warranty coverage period. I have completely disassemble the laptop and examine the motherboard, it looks and smells new. Internally, everything is very, very clean. The motherboard model of mine is HN110, the one that has the geforce 7400gs in it. However, the batter is bad because it holds no power. I have tried on my friend's m1210 and checked it through Dell utilities and it gave a thumbs down. I cannot confirm if the LCD, speaker, sound card, processor, system fan, heatsink, and camera are fine, or not. I am able to confirm the ram, wireless card, and the CD drive are perfectly functional. I have yet to test those under performance conditions. The main problems is: I am unable to turn on the laptop. I have tried 5 different adapters: 2 Dell m1210, 1 E1705, 1 E1505, and 1 Targus universal adapter. All of them do not work on the laptop. When I plugged a Dell adapter into my m1210, the AC adapter shuts off. The green light on the Dell AC Adapter shuts off. I tried my friend's charged battery to power up my laptop;however, my m1210 still will not power on. I have not find a way to test the circuit board on my m1210 and my friend is very, very wary of me opening up their laptop. So anything that involves me trying different parts on his laptop will be almost impossible for me to ask for, he is a noob.
I recently bought the XPS M1330 from a friend and wasn't familiar with the current issues caused by the nVidia GeForce 8400M GS. Lately, I've been looking for a solution to the problem...
I was reading about the Cooper Mod in another thread and it just seems like a temporary fix...
So, I was wondering has anyone tried manually installing the Intel version of the motherboard, since it seems to have no overheating problems. Has anyone tried a different motherboard to fix the overheating?
I was on chat with dell a few months back and I was telling them to replace my motherboard and processor and I was complaining about heat.
Anyway during the whole convo I was joking (not really) about giving me a 4670 motherboard instead of the 3670. Well I have had the parts for a month now and was just going to return them because
I didn't feel it would change anything replacing the same parts, knowing that the xps just gets warm on it's own. (and yes I undervolted, helped a lot and added more thermal paste)
Any to make a long story short the dell tech sent me a motherboard now with a 4670 ati chip on it. The processor was the same but man am I stoked.
Anyway is my computer a 1640 still or a 1645. Should I update any other drivers besides the video card. My service tag is irrelevant now also when downloading drivers.
