Dell :: M1330 Motherboard Woes...
Jan 30, 2009
Has anybody on here with the Intel GMA X3100 had a failed motherboard on the M1330? I have searched the forums, and while the Nvidia equipped models seem to be prone to it, I've not had any luck finding info on failed Mobo's on laptops with intergrated graphics. Two months out of warranty too.
also, If i jam a big hard drive into the machine, how would that affect cooling/battery life? I'm sure is its a noob question but i've only ever stripped desktops.
View 5 Replies
ADVERTISEMENT
Feb 25, 2010
I am completely frustrated with Dell. I purchased my XPS M1330 in February, 2008. Thank God I also purchased a 3-year premium service contract. Since then I have had the motherboard replaced 4 times, the hard drive replaced once, the fan and heat sink system replaced, the keypad replaced, and the memory replaced.
I had to re-install my operating system and programs to get rid of a Blue Screen of Death, at Dell's insistence, when I knew and it was later substantiated that the motherboard was at fault, yet again. Needless to say, I had to exercise a lot of self-control after that. All that work and time invested and, PRESTO: Blue Screen of Death. So much for "it's a driver issue."
In my opinion, these laptops run way too hot and, as a result, kill components. Please don't get me wrong.
When it works it is a joy to own and use. But, if I take just the replacement motherboards (4) the replaced hard drive (1), the replaced keypad (1 or is it 2 now?), replaced memory (1), etc. and simply divide those 7 service calls by 24 months, it averages one major fix every three and a half months that I have owned the computer.
This is a far cry from the exceptional dependability of my old Inspiron 600M that never gave me one ounce of trouble in three years of very hard use.
View 7 Replies
View Related
Dec 14, 2009
One of my mates has a dead M1330. I told him about the "oven" trick but his wife might hurt the both of us. It is however possible to replace the motherboard with the integrated X3100 motherboard correct?
View 10 Replies
View Related
Aug 16, 2009
I recently bought the XPS M1330 from a friend and wasn't familiar with the current issues caused by the nVidia GeForce 8400M GS. Lately, I've been looking for a solution to the problem...
I was reading about the Cooper Mod in another thread and it just seems like a temporary fix...
So, I was wondering has anyone tried manually installing the Intel version of the motherboard, since it seems to have no overheating problems. Has anyone tried a different motherboard to fix the overheating?
View 5 Replies
View Related
Jul 22, 2009
It was probably the heat, but during some intensive video editing my M1330 shut off in an instant and would not turn on, battery nor a/c.
When I plugged the adapter into the laptop, the light on the adapter went off.
The tech came and replaced the MD (second time, first was Oct.2008).
The tech said if it happens again, I could request an additional/upgrade heat-sink/fan, not really sure.
View 3 Replies
View Related
Sep 24, 2009
Well, my Nvidia 8400 died for second time and I called Dell to replace it. After asking for a sustainable solution and to ensure me that I won't have the same issue once more, they said that they will install me a new motherboard revision which reduces the possibilities of having my GPU dead.
Thus, they replaced the motherboard. I didn't format my system but kept my Windows Vista Ultimate x64 installation.
After using the system for a couple of hours I realized that the system was under-performing. Then I checked with CPU z utility and found out that the CPU clock was stuck @1,6GHz (although my power scheme was high performance). My processor is the T7500. The system was overheated and the clock speed was reduced (I guess). The thing was that I could almost do nothing, not even surf on the internet. This makes my laptop unable to deal with applications that need lots of CPU power.
Does anybody else face the same problem? Is there something I could do to return to the old situation? Should I contact Dell and complain? It is a huge problem cause half of my applications cannot be used any more!! After a few minutes of use the laptop stops performing normally!
Could it be that if I format my HD and make a fresh install the problem will be resolved? (I repeat that I didn't format my system after the MB replacement).
View 10 Replies
View Related
Sep 24, 2008
So My M1330 was part of the defective batches of Nvidia Video card. A dell tech guy came and replace the motherboard and also a defective battery. I assume that the hard drive would work the same and I assumed I didn't need to format. My current hard drive was just taking forever to boot up, and was just so slow. I figure i needed to reformat.
I used a new 320GB hard drive i was planning to replace the current drive with. Now that its fully formatted. It's still unbelievable slow. I though the speed step might not be working current but i used wcpuid to test the current speed and it was at full speed. Though the system doesn't seem hot at all. I just cant figure out why its so slow. bios is currently at A12 which is the lastest
View 10 Replies
View Related
Oct 4, 2007
I have xps gen 2 with a faulty video card and i was wondring if its possible to replace the motherboard with M1710 motherboard so i can fit my 7900 gs video card in it and put all the other hardware parts for the xps gen2 motherboard to the M1710 motherboard in the XPS Gen2 palmrest ... so can u please give me some hints if its possible to do it or not,so basiclly its replacing a motherboard and putting all the old part in the new 1 ..
View 14 Replies
View Related
Mar 11, 2010
I own a DELL XPS 1640 laptop here in India [See Signature for details...]...
AND, I finally gave vent to my DELL'ish' emotions and shot a mail to our very beloved Sir Michael Dell for the following issues –
•Ever falling rubber bumps/guards on the left and right sides of the keyboard
•Continues scratching on the LCD and keys imprinted on it due to 'screen rubbing against keyboard' syndrome;
•Dust behind the LCD plastic cover coating;
•The heat issue;
•And last but not the least the infamous ‘1640 Throttling’.
I got a call from a Senior Dell Marketing person today and had a lengthy half hour talk with him.
I tried pushing for replacement but since I got my DELL XPS 1640 laptop via a friend in U.S of A (I am writing in from India),
who got it delivered to me here, they say this would be possible only if the system reaches back to the starting point in USA, from where DELL can take over (Dear DELL, I really don’t have the luxury of time for all this playing around .....
View 3 Replies
View Related
Mar 8, 2009
Bought a refurb dell xps m1330 just over 5 months ago from aria.co.uk and the screen has gone.
Works with an external monitor but black screen on the laptop. Has passed the 90 day aria warranty.
Have contacted Dell who tell me from the service tag of the laptop is registered to someone in Norway hence cannot help me
View 9 Replies
View Related
Jun 19, 2009
I'm having trouble with the fingerprint reader on my M4400. I have done a clean install of Windows 7 RC x64, and installed the relevant drivers, but the only software that recognizes the fingerprint reader is Embassy Wave bundled by Dell (which seems a bit, well, clunky ).
I have tried UPEK's Windows 7 software, which installs fine, but it cannot find the fingerprint reader. The same happens with DigitalPersona too; it installs perfectly but can't find the device. The fingerprint reader is listed in the control panel (it shows as '5880', which is the combined Broadcom fingerprint reader, smart card reader etc.), so I'm not sure why nothing but Dell's software can 'see' it.
View 10 Replies
View Related
Apr 22, 2009
I have purchased a HP fv5 1215 tx its C2d 2.2ghz (intel T6600)
has Nvidia 9600M GT graphic card,15.4 inch display
full specs:-
[url]
I felt that the 6 cell battery life is not as it sould be (a few fellows have laptops, without a dedicated graphic card, so i wasnt sure) so I have ran some tests (more than once to verify data ,the difference is +/- 1 minute) to verify the status of the battery ambient temperature around 35~40 celcius
All 'tests' were on windows vista SP1 , 50% brightness, no wifi,bluetooth,lan moden connection,no usbs attached on windows vista, when laptop is idle (to test, i just opened it up,changed the powersettigns so it doesnt close scree,run screen saver ,suspend or hibernate, and left it there, doing nothing and it ran for mere 2 hr 30 min..........
View 4 Replies
View Related
Dec 19, 2008
I ordered my XPS M1530 at the beginning of this month, and I decided to add a blu-ray drive to it, so they had to cancel and place the order again.
I received my XPS m1530 this Monday 12/15/2008.
M1530, t9300, 4gb 667mhz, 8600mt 256mb, 320gb, Blu-ray Burner, 9cell, midnight blue...
One of the main reasons I chose to go with the dell was:
A. I had the option of having a very high resolution screen 1900 x 1200 (wuxga)
B. I got a good deal on a 4 year accidental damage warranty w/ the package.
--
I was so excited about getting a 1900 x 1200 screen; it would allow me to be as productive as on my desktop since I work with many windows open. I also play a little with video editing.
As soon as I received it I tested out the notebook for several hours.
The first thing I noticed was that white and light colors are shimmery / grainy. I have never seen this on any other screen that I work on.
After several hours I found myself feeling a little nauseous. In addition, my eyes felt strained.
I have never experience this in my life as I sit in front of computers 8-10 hours a day for the past 20 years (Work).
I raised the DPI of the fonts in vista to make them a normal size, so I don't feel that the size of the letters caused this feeling.
The next day, I decided to try again. This time I set the screen to 1440 x 900. I still experienced the same effect. I think the shimmery / graininess of the screen is causing this, as it causes the text to blend in with the background to a degree.
I tried using the notebook throughout the week. I tried getting used to it, and I did somewhat, but still felt uncomfortable working on it for an extended period of time (after only 2 hours).
I then called my sales rep. to see if he had heard of this problem. His only advice was that I should call customer support.
I called customer support, and got someone from the Philippines on the phone very quickly. The person was very nice, friendly, and wanted to help me. I was impressed. (They probably don’t want me to return it within 21 days).
He told me this is the nature of the wuxga screens. He was willing to send me another notebook to compare it with either a 1440x900 display or another wuxga.
I then did a bit of searching and found other people expressing dissatisfaction about the graininess (which is what I think is causing my fatigue) on the wuxga screens as well as other Samsung screens.
My question to everyone is:
Has anyone else experience this?
Do you think switching to the 1440 x 900 LED screen will resolve this issue?
Does the WUXGA 1900 x 1200 screen come in any other brands besides Samsung, eg. LG ?
I am really dreading on downgrading to 1440x900 as I love the real estate that the wuxga screen provides, but something is up with its quality.
I am trying to convince myself that I will get used to it but I really do not think this is the case..
View 10 Replies
View Related
Apr 21, 2009
I have purchased a HP fv5 1215 tx its C2d 2.2ghz (intel T6600) has Nvidia 9600M GT graphic card,15.4 inch display full specs:- [url]
I felt that the 6 cell battery life is not as it sould be (a few fellows have laptops, without a dedicated graphic card, so i wasnt sure) so I have ran some tests (more than once to verify data ,the difference is +/- 1 minute) to verify the status of the battery ambient temperature around 35~40 celcius
All 'tests' were on windows vista SP1 , 50% brightness, no wifi,bluetooth,lan moden connection,no usbs attached on windows vista, when laptop is idle (to test, i just opened it up,changed the powersettigns so it doesnt close scree,run screen saver ,suspend or hibernate, and left it there, doing nothing and it ran for mere 2 hr 30 min
and with everything same,ran a avi movie off harddisk it lasted 2hr 18min
when turned off , it takes 1hr 45 min to charge from 1% to 100
when turned on it takes 2 hr 25 min to charge from 1% to 100
View 5 Replies
View Related
Jan 29, 2009
I just treated myself to a sweet new Solid State Drive but boot camp apparently does not like the new intel ssd drives. Is there any viable work around for this? Lovin my new mac, but bootcamp was fun for lan parties and such... I hear an EFI firmware might be in order, but in the mean time any alternative would be useful. I find the myself using OSX way more often than windows, and if not for gaming would prob convert most of my machines. Sorry if this is a dupe thread, but i've been searching the net days for info on this.
These drives are going to be popular, i hope other future ssd drives don't have issues with these new nvidia based macs.
View 3 Replies
View Related
Mar 17, 2008
since receiving my new Acer 7720-6604 (Cdn) a week ago, I am a firm believer. I cant believe it, the new Acer with 3G's of DDR2 RAM is even slower than my 5 year old Toshiba Satellite 2.8Gz Celery with 768MB of memory. It opens sites faster. It boots faster!
The only changes I have made to the new Acer so far was to uninstall the demo Nortons and have installed AVG free and SpywareBlaster. Also, I have disable Aero
I thought it might be AVG and SpywareBlaster slowing it down so tried it with both uninstalled and no change. Re-installed them
I ran across a MS suggestion using "Ready Boost" in which you utilize a 1G or larger thumbdrive to use as a cache. Possibly a very slight increase, so small I really cant say.
As the new Acer has a Geforce 8600M GT GPU and a T8100 Core 2 Duo processor, it cant be the hardware. The two drives are both WD 5400rpm so its really not them as I dont believe that 7200s would make that big a diff.
I am sorely tempted to utilize the second HDD for an XP install (just that it will be another $100 or so layout) Hoping that the SP1 will sort this garbage out.
View 15 Replies
View Related
Dec 11, 2009
Just picked up this new notebook. When on Skype, the image quality rec'd by others is downright terrible. For example, the cables for the headphones I was using is seen as terribly jagged on the other end. See it here.
Is this image is as good as it gets? Seems like a 1.3 Mb camera should be able to do a better job.
View 6 Replies
View Related
Mar 20, 2009
On my DV9774ca theres two hard drives. The second (D) drive has started acting up. I download torrents and newsgroup Tv shows to it, leaves the C drive free. Its started to freeze the system if I sometime do stuff on the D drive, like un-rar a movie on the D drive.Theres no odd noises, nice and quiet.
I did the hard drive scan and fix on the Tools tab in Properties of the D drive. It gets to test 4 and says its at '10% File 359 of 17254' and freezes there then!
I did the diagnostic in the BIOS for this drive and it estimates 89 minutes to do the test, yet after 20 seconds it stops and says something like '#100068 Replace Hard Disc'.
I gather the hard drive is toast. Its a WD 160GB. Came with the laptop exactly 12.5 months ago! I called HP and I am out of luck, I thought they could swing it for me.
Am I right it say its toast? I gather its mecahnical, as thats what the BIOS looks for? I can't just reformat it?
View 5 Replies
View Related
Mar 17, 2009
I recently replaced an old Linksys router with a 1TB Time Capsule. I loved the idea of an integrated solution with passive backups. Unfortunately, I am starting to regret this purchase but I'm hoping that I am just missing something.
The TC sits upstairs in my office where my Linksys used to be. On the main floor, I tried to add my PS3 to the network. It ends up showing a signal strength of about 55%-65%, with NAT Type 3. My old Linksys gave me 85%+, with NAT Type 2. I also noticed that my laptop's network signal strength is four bars when I'm on the main floor, which is one less than with the Linksys.
View 3 Replies
View Related
Mar 14, 2009
Laptop: Sony Vaio TZ31VN
Integrated Globetrotter HSDPA Wireless WAN, Bluetooth and Intel 4965AGN Wireless LAN, Windows XP SP3 (Official Sony XP Downgrade Build)
This one really has me stumped - I'd appreciate any suggestions!
In summary, I have a problem with my Sony VAIO TZ31 wherein I'm unable to use my WiFi. The Wireless Device Switcher utility (C:Program FilesSonyWireless Switch Setting UtilitySwitcher.exe version 4.0) no longer 'sees' my integrated WLAN card to give me the option of turning it on or off, however it does see both the Bluetooth and WWAN cards. The hardware switch on the front of the laptop is in the 'ON' position, and the Bluetooth and WWAN lights are illuminated, however the WLAN light isn't, and I can find no way of enabling it. The Bluetooth and WWAN are still working.
My problem determination so far:
The normal Windows Wireless Network Connection dialogue tells me immediately (i.e. doesn't seem to scan at all) that it can't find any networks and that I should check that my wireless is turned on. I have another several devices in the house that are seeing the network just fine, as does my iPhone right next to this laptop.
Running an `IPCONFIG ALL` from the command line suggests that it is physically still there:
Ethernet adapter Wireless Network Connection:
Media State . . . . . . . . . . . : Media disconnected
Description . . . . . . . . . . . : Intel(R) Wireless WiFi Link 4965AGN
Physical Address. . . . . . . . . : 00-1D-E0-C3-xx-xx
Checking in Windows Device Manager the `Intel(R) Wireless WiFi Link 4965AGN' entry appears with no question marks or exclamation marks telling me there's a problem or that the device is disabled. Opening up the properties dialogue for this, the drop down box on the Advanced tab says 'Wireless On'. All other properties are on the default values....
View 6 Replies
View Related
Jul 9, 2009
is anyone else having probs with their touchpad? i got this laptop in Feb and now when i click the button on the touchpad i have to press it a couple times before it does anything.
View 4 Replies
View Related
Jul 17, 2009
Dell came and replaced my motherboard the other day, I was wondering if this also means that I got my GPU replaced?
I was told that my GPU was part of my motherboard by a friend.
View 10 Replies
View Related
Jul 8, 2009
does anyone have a burnt motherboard for a m1730 that they would either donate or sell very cheaply i am in need of some connectors and i dont wanna buy a good mobo on ebay for 150+ just to scrap it
View 3 Replies
View Related
Jan 15, 2008
i'm having trouble with my XPS m170.
It has:
Pentium M 760 2Ghz
1Gb Ram
60Gb HDD
Geforce Go 7800GTX 256mb
17" WUXGA
Windows Media Center 2005
I was playing CS:S, and all of a sudden i was getting artifacts on the display. Than the computer froze up and i had to power the laptop down manually.
I was able to restart the computer in safe mode a couple times.
But wow when i try to restart the computer, i'm getting artifacts on the Dell Splash screen. And then it would freeze up.
What do you think the issue is? At first i was thinking the GPU is the problem. But now i'm beginning to think its the motherboards.
View 15 Replies
View Related
Sep 6, 2007
I have recently put an M1710 LCD screen cover on my I9400, and the palmrest with the XPS logo in it.
I saw while I had my system apart my motherboard has the solder joints on it for the plugs for the LED's but no plugs for them(has them at the front for the speakers, next to the fans and next to the connection for the monitor).
Is it possible to solder the plugs on, will they work ?? I guess I will need a new BIOS for them ? anyone done it. Would appreciate any info/help. what plugs are they ?
Also is the XPS logo in the touchpad controlable ? mine isn't working at the moment (it's plugged in and was bought second hand but supposidly working ?) anyone know. I know others have done this mod.
View 15 Replies
View Related
Dec 6, 2007
my motherboard crashed and my harddrive has some important files, is there a way to extract the files from the hard drive with my current pc?
View 10 Replies
View Related
Feb 9, 2009
After some issues i had with my GPU, Dell agreed to replace both my Heatsink and Motherboard, and i wanted to ask those who have had replacements in the past; has anything changed since july 2008? (when i bought my m1530)
have they improved the heatsink, or even changed it? ( i got the aluminum one, crappy piece of engineering right there )
and im sure the GPU issues are still present, but do they run cooler now ?
im asking this because in July the "defective Nvidia GPUs" were still in the dark, and the news about them was a mere rumor...
View 10 Replies
View Related
Sep 22, 2009
My E6500 is having the motherboard replaced later today. Is there anything I should be aware of or that I should check out once it's done?
View 10 Replies
View Related
Sep 25, 2008
I bought a Dell XPS from a friend of mine and the motherboard packed it in, what kind of motherboard is in the XPS 1710. I want to buy one so I can get this machine up and running again.
View 10 Replies
View Related
Jun 3, 2009
The motherboard on my XPS M1330 needs replacing for the second time. First time it was replaced under warranty, but my system is now out of warranty so I'm going to replace it myself.
I phoned Dell and they're charging €400 for a replacement but I can get it cheaper if I knew the Dell part number. I have the NVIDIA 8400M GS.
From doing some research, here are some part numbers for motherboards for XPS M1330's:
PU073
GM848
CX062
D057F
K984J
How can I check my existing motherboard's part number to ensure I order the correct part?
View 9 Replies
View Related
