Dell :: Studio 17 And Dual Screen Output?
Nov 1, 2009
I've asked Dell but they are clueless..... does anyone know if the Studio 17 laptop can output display to twin 24" screens at 1920x1200?
Ideally I would like to know if it can output a digital signal to both screens?
Dell suggested that it may be possible with a Displayport to dual DVI cable.....
I haven't ordered the laptop yet so would consider any options that would allow dual digital display.... eg. upgraded graphics card or use of a docking station.
View 6 Replies
ADVERTISEMENT
Jan 10, 2009
Perhaps some of you have more experience with this than I do, so I thought I'd ask.
I know the 1640 has DisplayPort, VGA and HDMI outs -- my question is this: Can I run two external monitors with this laptop using the outputs --
I'd like to run 2 24" (1900x1200) from the 1640 -- I don't really care if the internal LCD works when I have it plugged it -- I'm just looking for a psuedo-docking solution when I'm at home at my desk
View 3 Replies
View Related
Mar 28, 2009
Can someone confirm if the Studio XPS 16 has got a S/PDIF output?
View 7 Replies
View Related
Oct 17, 2009
Before I was able to get hdmi sound output to my hdtv, but now its not working.
I try making the default playback device to be Digital Audio (HDMI), but its not outputting to my tv.
View 10 Replies
View Related
Jun 1, 2009
I have the above mentioned notebook and I was wondering is is possible to get different audio output from each of the two plugs that are available
View 6 Replies
View Related
Feb 20, 2009
I have a studio xps 16 and whenever I plug it via HDMI to my tv (which has a 1080p resolution) there are black bars all around the image, meaning the image is smaller than the tv. I've set the resolution of the tv (from Catalyst Control Center) to 1920x1080 and it still won't do full screen...
View 10 Replies
View Related
Dec 23, 2014
When I switch the laptop on, I hear the HD spin up and the lights/ buttons for sounds & media can be pressed, but I do no get any output on the screen. No Dell Logo, nothing. I do not see the Hard drive activity light on again after this either. I have tried the hdmi cable as well the indicator light does not indicate it is running.....
View 2 Replies
View Related
Nov 3, 2009
If I have a 1080p/5.1 source on my laptop (BD, .mkv, etc.), will I be able to output that signal via the HDMI port?
I've read about some laptops only supporting HDMI video/not supporting HD resolution output/HDCP issues and just want to confirm that the Studio is capable of this.
View 7 Replies
View Related
Apr 20, 2009
Can anyone that has the Sony Vaio Z Series Laptop tell me if the HDMI output on the Z Series outputs 5.1 Dolby Digital surround Sound?
View 3 Replies
View Related
May 30, 2009
i would like a bit of raid action or a ssd to compliment my 500gb drive but i doubt it has the additional bay and i cant be bothered taking all those screws out......
View 5 Replies
View Related
Apr 28, 2009
Dell sent me a 1647 as a replacement for a faulty 1640 but they didnt install the bluray drive like my 1640 had, and now they said that they are not going to
View 8 Replies
View Related
Mar 17, 2009
I have found all of the drivers (including HDMI, Modem, etc.) and am succefully duel booting XP Proffesional 32-bit and Vista Home Premium 64-bit.
If anyone would like a guide with links to drivers i'd be happy to make one, btw, i'm using xp right now
View 8 Replies
View Related
Mar 2, 2009
if it is possible to get SonicStage Mastering studio to encode output files as MP3. It appears to be limited to only WAV or DSD out.
Also has anyone found a forum anywhere of like minded SonicStage Mastering studio?
I have been remastering some CD's I produced a long time ago and really like some of the plugins in this app, but having to convert WAV to MP3 as a separate step is a pain in the ... The compressor and parametric EQ pulgins are really nice.
View 3 Replies
View Related
May 3, 2009
i'm looking to purchase one... i need confirmations.
also where would you get the extra caddy for it?
View 7 Replies
View Related
Jan 25, 2009
I am about to make a purchase on the Studio XPS 16..
However, my main issue is would it be able to drive my 2 Dell 3007WFP-HC displays?..
I am aware that the Studio XPS 16 has a HDMI and DisplayPort built it.. Provided I am able to get all the conversion cables, could this laptop drive my 2 30" monitors at their native (2560 x 1600) resolution?..
View 10 Replies
View Related
May 27, 2009
I posted it in the accessories forum, but didnt get much response..was wondering if you dell guys have a better idea on this.
Basically, I have a 2.5 year old Dell E1505 with ATI x1400 on it. I just bought a new Samsung T220HD monitor and I love that thing. But, when I first hooked it up and everything and ran dual monitors, my external screen flickers about once every 5 mins.
Then when I adjusted a few things, the external screen stopped flickering, but my laptop screen started to flicker, once every 5 mins or so. When I watch tv on my this monitor (it has a tuner built in),
there is no flickering, and when I use my external monitor as my main monitor (by closing the lid of my laptop),
View 3 Replies
View Related
Oct 13, 2014
Aspire S3. The PC is perfectly fine, except the fact the the screen is broken. It already broke twice (just by opening...), so we are not spending money on a third one.So, what I want to do is to connect it to an external monitor through HDMI (and possibly remove the broken screen, since it has no use). I can do it in Windows, but not outside Windows (BIOS) and I'd like install Windows 8.1 or 10. So my question is: can I force output from boot into HDMI? If so how, if not, what alternatives do I have to install a new version of Windows without spending a small fortune?
View 3 Replies
View Related
May 4, 2010
Surprised to see the pricing of Studio 1558.
i do not understand why dual core i5 processor studio is costlier than quad core i7 studio ?
View 8 Replies
View Related
Feb 14, 2014
I have a HP Envy M6-1158ca, and recently my Built-in display stopped working. I plugged it into an external display via HDMI and it showed no input. It seems as though the laptop is not booting into Windows either, as usually whenever my laptop boots into windows, the fingerprint scanner blinks letting me know I can now sign in using it. I am extremely frustrated with this, and have an unbelievable amount of stress because this was my only PC.
View 9 Replies
View Related
Feb 26, 2008
Is it possible to have a different background/wall paper when running in Dual view monitor mode?
View 11 Replies
View Related
Jan 27, 2010
I just want to be able to have two screens (1 monitor, the other my MBP screen) going at the same time and all that good stuff...
What I am looking for, if someone is willing, is for a specific list of hardware and software that I will need to do this (if possible). And in case it matters, no I do not have Windows installed via Boot Camp or anything like that.
The sites I have been looking at today are somewhat confusing even when it comes to what hardware to buy. I am in no way new to computers, so I have a general understanding of the components, but I just really need someone who has done this or knows how to do this, to basically just list everything I need.
View 3 Replies
View Related
Dec 2, 2014
I have a Acer aspire E15.
I just added a lcd monitor but i cannot get the dual screen to work when i go to devices there is a yellow triangle beside the laptop it said usb controller doesn't have a driver"
View 1 Replies
View Related
Jan 2, 2009
It sure does look like that Clevo 18in revealed sometime ago.
[url]
Quote:
Under the hood of the 17.1-inch Firefly we found a 2.4GHz Intel Core 2 Extreme Quad Core CPU, 4GB of RAM, a pair of ATI Mobility Radeon HD 3870 GPUs running in CrossFire mode, and a 7,200 rpm 250GB hard drive. The Firefly spec sheet said the machine is capable of overclocking, but we didnt touch the BIOS.
And a MultiTouch trackpad, Backlit keyboard (with m15x-esque customizable colours), Creative X-Fi audio and a Dual Hinge like the HDX 20.
View 10 Replies
View Related
Jan 1, 2015
I have a problem with hdmi output to my TV screen.
I have Y510P (i7-4700MQ CPU @ 2.40GHz, Intel(R) HD Graphics 4600
& NVIDIA GeForce GT 755M, Win 8.1 64-bit(6.3 build 9600), all with latest drivers )
My TV is Panasonic TH-L32B6. When I connect my laptop to TV it shows me awful picture quality and notification that “this is not optimal screen resolution for the primary display. The optimal res. Is 1280x720”. But with 1280x720 it’s still awful. It works fine just with 1024x768 res. I have no such a problem with my other TV LG 47LS570Y. How can i fix picture quality with higher resolution? I tried another OS like Ubuntu and a couple of hdmi cables…(see attachment)
Link to image 1
Link to image 2
View 3 Replies
View Related
Jan 2, 2009
It sure does look like that Clevo 18in revealed sometime ago. This is not an OCZ Whitebook rebrand.
[url]
Quote:
Under the hood of the 17.1-inch Firefly we found a 2.4GHz Intel Core 2 Extreme Quad Core CPU, 4GB of RAM, a pair of ATI Mobility Radeon HD 3870 GPUs running in CrossFire mode, and a 7,200 rpm 250GB hard drive. The Firefly spec sheet said the machine is capable of overclocking, but we didnt touch the BIOS.
And a MultiTouch trackpad, Backlit keyboard (with m15x-esque customizable colours), Creative X-Fi audio and a Dual Hinge like the HDX 20.
View 10 Replies
View Related
May 18, 2014
I have recently purchased a W540 and connected to my Dell u3011 30" monitor. I used the Dual Link DVI-D cable that came with the monitor and plugged it into my Ultra Dock. The maximum resolution i can get is 1920x1080? When i change over to a Display port cable i can achieve the full 2560 x 1600 resolution? Is there something i need to do in addition to achieve the full 2560x1600 resolution with the DVI-D dual link cable? I want to be able to connect 2 laptops to the one monitor and only have 1 display port input so i need to be able to use the DVI cable on the 2nd machine while still achieving 2560x1600 resolution.
View 1 Replies
View Related
Mar 15, 2009
I installed Windows 7 on my 5930G and now - even after uninstalling - I'm stuck with the screen that asks me to choose the OS when I boot my computer (original OS, Vista). What can I do to get rid of the screen?
View 4 Replies
View Related
Sep 1, 2009
if my video card is capable of supporting dual monitors. I was hoping to avoid buying a converter because money is tight but I dual monitors is a necessity for my situation now. I have an inspiron 1720 by the way if that matters.
View 9 Replies
View Related
Nov 13, 2014
HP ENVY 15-j165 hdmi output problem - tv recognised in video and audio setup BUT external screen blank ....
It even mentions the SONY-TV in the output settings (audio and video) but there is nothing on my tv, just a blank screen ....
I have tried re-installing drivers, getting frustrated ....
View 5 Replies
View Related
Oct 13, 2009
Long ago (A year ago lol) I bought the Gateway FX gaming notebook. It was a great PC and could not beat the price with the hardware and performance it offered, however the screen was really bad.
At first glance it wasnt, 1080p res and good brightness level, but when I plugged in my old external LCD monitor to dual screen, I was floored. My 4 year old desktop LCD screen was almost better in every single way.
The Gateways colors were dull, muddy, and dark, no matter how much I recalibrated the screen, I could not get it to look anywhere as good when compared to my Samsung screen on my desk.
View 6 Replies
View Related
