Dell :: XPS M1530 Faulty GPU Or What?
Aug 27, 2009XPS M1530faulty GPU or what .
View 4 RepliesXPS M1530faulty GPU or what .
View 4 RepliesI posted a thread earlier about my CPU getting very hot. Nobody said it was to hot for gaming but my CPU is downclocking when I play a game longer then 5minutes. I have it proped up, my fans on on high, and cleaned my vents and it's still hitting 85C in as little as 30minutes of gaming. My 80NM 360 don't get near this hot. My last laptop (M170) only got to 50C.
So my question is:
is my CPU faulty or does anybody know how to fix this? Hell, it's 60C right now!
my recent purchase of an xps1530 i have noticed that my graphics in my game have not run as well
when i play counterstrike source it will be like 100 fps for like 5 mins then all of a sudden it drops to 20 fps. its horrendous to play
other games run terrible like world of warcraft and mass effect. is there any fix for this
is this a heat issue?
can i set my fan higher
if its faulty how do i get a new card?
Well dell came out and once again replaced the mobo today... making this the 3rd time this computer needed servicing... and to my surprise while test driving it today (after the guy left), the computer shut down after reaching over 100c on the ACPI temps...
funny thing is, i didnt smell anything burn, there was no heat at all, and everything seemed fine...
i unseated the heatsink and tried it again, sure enouh the same thing happened. the fan maxes out as soon as i start the PC, when it loads windows...
then once i get there, it completely stops... i mean the fan blade arent turning .....
what i wanted wass to fix/bypass the sensor without having to replace the damn board. i couldn't even find a single post staing where exactly the sensor is on the board.
my problem specifically was that beer got spilled on the keyboard. after a while the machine shorted and shut off. I have a Dell Inspiron 9300, with a 1.73 ghz Sonoma CPU. i left the laptop off for two days so some of the liquid would dry out. after some problems and a dozen reboots i got into the bios, then finally through to windows. everything was fine except that the CPU was working at a very low frequency. also the fans were continually at highest speed. the CPU was being reported between 101 mhz to 503 mhz, depending on the software. it was being recognized correctly but showing to operate at 202 mhz in the system properties panel. what was really striking is that the notebook harware software i had installed was reporting the CPU temperature as 85 C. I tried various software to manipulate the CPU frequency to no avail. The temp was a constant 85 C, although i could tell that it was not even close to this temperature since i my laptop was partly disassembled and i could feel the surface of the heatsink with my hand; it was cool.
I finally surmised that the problem was with the thermal sensor on the motherboard. it had probably shorted or got soaked and was reporting the highest temperature it could as a safety measure, thereby limiting the CPU to a very low frequency and not allowing it to throttle above 503 mhz.
My last option, save for replacing the motherboard, was to find the sensor chip, clean it, dry it and hope that it would work again.
But this is not what solved the problem. somewhere on the net i came accross a code, that when entered on an Inspiron 9100 (an older laptop, with a different chipset) would bring up the Thermal Management screen or something like that, which is certainly not accessible via the BIOS. I was playing around with the settings on a program called Hardware sensors monitor, again to no avail, when i finally decided to enter this code:
FN key + zxcvasdqwer. almost the second i pressed z, or maybe after x, the high speed fans shut off! after a short while they kicked back into operation but at a low speed, just like they were supposed to. the program hmonitor began reporting a more realistic CPU temp. i tried to play a high-def movie file and finally it played normal, without any lag or stuttering! as i played it, the fans kicked into higher mode, and the temp which had been steadily rising, began to drop. the program, and most other programs were still reporting the cpu at 202 mhz, windows system properties as well. but since it was playing a 720p video file normally, it had to be much higher than that. i did a reboot and voila!
all monitoring software are now reporting the CPU at 1.73 ghz. the system temperatures are perfectly normal, and at idle the CPU goes as low as 20 degrees C. The software Speedfan, however, is still giving an error regarding the sensor chip on the motherboard.
I seemed to have fixed the severe thermal sensor problem by a few keystrokes, without having to replace the motherboard or even the sensorchip. in fact, i didn't even have to find the sensor node and clean it.
I came accross more than a dozen people who had a very similar problem to mine, with the temperature being reported at 85-86 C, for no reason. At least those who have a Dell notebok might be able to solve this problem.
I understand that sometimes mistakes are made and early versions of products are less reliable, but Nvidia seem to know exactly what the problem with the 8600 is but make no attempt to fix it...
View 10 Replies View Relatedmy xps m1330's power adapter recently became faulty, so I ordered another one from eBay.
It just arrived today, but the problem is when the adapter is plugged in to the computer and a power source,
the green LED light flashes. Does anybody know what this means and how I can fix it?
My situation is that about a month ago i returned to my M1730 and noticed that it was running on low res ......
View 4 Replies View RelatedI never knew about the nvidia and the stupid faulty 8600 cards until i accidently saw it today. It makes sense why my laptop freezes when it comes out from sleep mode.
Now the question is what are Dell UK doing? I know my laptop is failing now. Can you get your money back because i don't want mine replaced by another faulty 8600 card.
I have a inspiron 1520 with 8600m gt. Its 1 year and 2 or 3 weeks old now. Fortunately i got 3 year warranty.
I have the XPS m1330 with the nVidia 8400 GPU. Got it back in September of 2007 with just one year warranty.
I just started getting the rainbow colored vertical lines on the screen today, did research, and found out it is due to faulty GPU design.
Called up Dell, and they said even my one year extended warranty due to this common GPU error was over in September of 2008.
They also said I am out of luck, unless I want to go through their out of warranty repair department.
I didn't use the laptop on regular basis till just 8 months ago when my old one finally gave out of me after 6 years. So m1330 has been only used for 8 months, and now I am stuck with bunch of verticals lines, and no hope.
My lovely Dell Inspiron 1720 notebook was working quite happily but then the next time I switched it on and used a browser it started filling the URL box with letter 'd' by itself.
It then returned to work normally for a minute or so but then started filling a page with the letter 's' then 'a'. Sometimes I can get it to stop doing this by pressing another key but 'a','s' and 'd' have stopped working altogether except when they spring into life by themselves.
Virus checker says it's clean. What checks can I run to determine if it is a driver fault or keyboard hardware fault?
my problem specifically was that beer got spilled on the keyboard. after a while the machine shorted and shut off. I have a Dell Inspiron 9300, with a 1.73 ghz Sonoma CPU. i left the laptop off for two days so some of the liquid would dry out. after some problems and a dozen reboots i got into the bios, then finally through to windows.
everything was fine except that the CPU was working at a very low frequency. also the fans were continually at highest speed. the CPU was being reported between 101 mhz to 503 mhz, depending on the software. it was being recognized correctly but showing to operate at 202 mhz in the system properties panel. what was really striking is that the notebook harware software i had installed was reporting the CPU temperature as 85 C. I tried various software to manipulate the CPU frequency to no avail. The temp was a constant 85 C, although i could tell that it was not even close to this temperature since i my laptop was partly disassembled and i could feel the surface of the heatsink with my hand; it was cool.
I finally surmised that the problem was with the thermal sensor on the motherboard. it had probably shorted or got soaked and was reporting the highest temperature it could as a safety measure, thereby limiting the CPU to a very low frequency and not allowing it to throttle above 503 mhz.
My last option, save for replacing the motherboard, was to find the sensor chip, clean it, dry it and hope that it would work again.
But this is not what solved the problem. somewhere on the net i came accross a code, that when entered on an Inspiron 9100 (an older laptop, with a different chipset) would bring up the Thermal Management screen or something like that, which is certainly not accessible via the BIOS. I was playing around with the settings on a program called Hardware sensors monitor, again to no avail, when i finally decided to enter this code:
FN key + zxcvasdqwer. almost the second i pressed z, or maybe after x, the high speed fans shut off! after a short while they kicked back into operation but at a low speed, just like they were supposed to. the program hmonitor began reporting a more realistic CPU temp. i tried to play a high-def movie file and finally it played normal, without any lag or stuttering! as i played it, the fans kicked into higher mode, and the temp which had been steadily rising, began to drop. the program, and most other programs were still reporting the cpu at 202 mhz, windows system properties as well. but since it was playing a 720p video file normally, it had to be much higher than that. i did a reboot and voila!
all monitoring software are now reporting the CPU at 1.73 ghz. the system temperatures are perfectly normal, and at idle the CPU goes as low as 20 degrees C. The software Speedfan, however, is still giving an error regarding the sensor chip on the motherboard.
I have two identical Dell Inspiron17R 5720's with the same problem with the Quote Key. When pressed once, nothing appears on screen. Press again and both appear. Get the same result if shift key is used for double quotes.
The same results get transferred to an attached USB keyboard, so it must be something wrong internally, either in Bios or Windows 7 (SP1)'s setup of the Standard PS/2 Keyboard.
I have a problem with my XPS 1730 laptop, this started probably 4 months ago. (second laptop that has screwed up after the warranty ended). I'm hopeless at explaining stuff, so i'll do it in point forms.
* First sign of trouble started when i booted up my comp one day and it beeped before loading windows and paused saying something like
"AC power adaptor not recognised, press F1 to continue F2 to enter setup, system will run slower"
If i continued then it did run really slow (even though power option was set on high performance) and the battery didnt charge.
* Every time i turned on my computer i had to keep putting the power cable in and out, adjusting it as i did so, until the battery light on the top right (near the lcd screen) flashed. If that didnt flash and i turned it on then the unknown power adaptor message would come up.
as you can see the picture on attachment..there is a small gap between my lcd with the backcover of my dell xps 1647..the gap is about 1mm and i can put my nail between the gap..is it ok?
View 10 Replies View RelatedWhere I can locate the instructions to change my faulty backlit keyboard on a Dell XPS 14Z (L412Z) ??
View 1 Replies View RelatedI wanted to load QuickSet on a D630.
Unfortunately, I can't find the original versions (e.g. 7.1.19) on dell.com and the version that dell.com says to use (v.8.3.17, A51) is broken. If I attempt to run R180759.exe, I get "Invalid self-extractor configuration. This file may be corrupted." (The MD5 checksum is correct.)
Where can I find a working version of the QuickSet installation file?
I have a 1.5 yr old macbook pro 15", 2.4ghz, 160gb hd, 2 gb ram... The video card burned out.. everything else is great...
If I buy this for cheap, can I possibly head to an Apple store, and get it repaired for free?
So Photoshop CS 4 is giving me corrupt graphics. It's very random, I've only come across it a couple of times.
Here's the picture: Click! (1Mb png)
Does this mean that my 9600 is faulty, since CS 4 is using my GPU?
(the only reason I linked the picture is because it's 1680x1050 and 1MB, and I didn't want to stretch the page)
I have a Lenovo U410 and a set of USB speakers on a faulty USB cable. I know, my fault: i connected the cable and the "+" and "-" connected for a short time. In my laptop i heard a little electrical explosion (no smell) and the laptop immediately powered off itself. At once i removed the USB cable and switched the laptop back on: no problems (!). But once booted, no USB port was working anymore. So my conclusion: i "fried" the system board somewhere.
The laptop is in its guarantee period, however i removed the hard drive and replaced it with an SSD. I assume the guarantee is lost when i replaced the HDD. I just re-opened the casing but i am unable to find "fried" components or "burned" areas.
Questions:
1. can i investigate more, or find a solution myself?
2. i probably need a new system board. Where can i order a new system board?
I just picked up a HP DV6812NR notebook. It has a AMD Turion 64 X2 processor (TL-60, 2.0GHZ). It's a barely used refurb model that the guy was selling because he couldn't get the OS to install. I bought it off him cheaply hoping it was just a software issue.
This model has an IDE hard drive so there was no need to slipstream SATA drivers into my XP install CD. However the XP install would not work right away. It successfully formatted the partition and copied files, but would hang after the installation reboot.
After a bit of research I tried selecting a different HAL by pressing F5 as the XP setup loaded. Funnily enough if i selected ACPI uniprocessor PC, the installation did complete. However unsurprisingly, XP then only saw one processor in task manager, and performance seemed just a little funky.
Does this suggest a bad processor? If so that wouldn't be the end of the world as I could probably pick up another TL-60 for around $100. Even cheaper I could pick up a Turion 64 X2 TL-50 (1.6 GHz). Any reason that lesser processor wouldn't work in this machine? What would the performance hit be like if this notebook is to be primarily used for watching movies and surfing the net?
I have a hp pavilion touch 14 notebook pc which turned out to have a faulty Hard disk as the OS was not booting and the system test's indicated that the hard disk had errors. I replaced the hard disk with a new one and before installing the Hard Disk I formatted it with a win 8.1 installation. I was thinking the laptop would just boot normally to win8, but instead gave me a screen saying:
boot device not found please install an operating system on your hard disk hard disk (3f0)
The hard disk is new and I don't no how its giving me this error!
Also, this laptop doesn't seem to want to boot from a cd to format!
I have been looking online and getting mixed results regarding buzzing noises from ac power adapters. My old hp dv6000 laptop powerbrick did not make buzzing noises as loud as my new dv6-1235cl from costco.
I noticed that a lot of people now hear buzzing noises from their ac adapter. Then I came onto this website.
[url]
Is this a bunch of bs or are they for real?
I can hear the buzzing noise when I put my ac adapter on the table, but almost non existent when its on the ground. I want to know if this will be a fire safety hazard in the future? I dont want my house burning down even when this thing is plugged in.
if anyone has had the same problem as me with the HP HDX 16. Randomly, even as I am typing here, the volume bar (with treble, bass etc) will appear on screen and will increase/reduce very quickly as if im pushing down on the touch buttons, this stops me being able to type, sometimes crashing the computer.
At the same time, this fault also occurs for the wireless LAN button to the far right, which will randomly disable (turn red) as if i'd touched it, sometimes causing the desktop to crash but more importantly causing me to lose connection and have to reconnect on a frequent basis.
I've had the notebook for over 6 months, and while i did have this occur on very rare occasions, since a couple days ago it has increased to a point where it happens all the time, including after a restart. I have tried searching through google to see if the problem is known, and i have seen a similar account on a customer review website. I have used HP health check and followed the updates supplied including that for the touch smart buttons and a BIOS flash.
I have a pavilion dv7-6b50ei notebook pc bought 2012. It always gives a command prompt pop up which doesn't stay long enough to read. I also felt there's a virus on it which my anti-virus couldn't solve so I tried factory resetting but when I restart and press F11 it gives an error(something like a boot.. is missing). so I tried my recovery discs. Disc 1 of 4 ran fine but disc 2 keeps stopping with an error.
Now the laptop doesn't load as I think the OS has been formatted during the recovery and don't know what to do. I feel disc 2 is bad too because it also gave an error while trying to copy it to a USB pen drive. I have also tried an external dvd and run the hp test on the hard drive; the hard drive passed the test. If I can get a new set of recovery discs, it would solve my problem.
Looks like atheros is highly recommended but I'm not sure if I have to be concerned about compatibility (meaning if drivers will be an issue)
View 4 Replies View RelatedI've bought this laptop back in 2008. Upgraded to windows 7 in Oct 2009.
I've always kept my laptop flat on my desk with no laptop cooler. My laptop has only been getting reallllly hot this pass month.
Attached is the HWmonitor graphic.
Is there more to this than just needing a laptop cooler?
When will the price of the m1530 come down?
I want it, but it costs a lot..
After christmas maybe? Or am I better off getting something else?.
I do live in canada so none of those amazing $400 off Inspiron/vostro coupons work...
I have an older m1530 from around when they were first released and I'm wondering If I could take advantage of more than 4GB of ram?
View 10 Replies View RelatedI had made the mistake of lending my XPS m1530 to a friend who is in the hospital due to cancer and she gave it back all messed up.
Most everything don't work. I can't get online, a lot of programs don't work, such as trying to right or left click in the taskbar and other places... nothing happens.
I tried system restore to before she got the computer and nothing changes.
I've ran AVG and spy bot and it found some stuff, supposedly fix them, but the problems remain. I defragged too.
So what to try next? Reformat? I don't want to if I don't have to.