i have an old HP 15" monitor(connected via VGA) and a 19" Dell monitor(connected via DVI)
looks like i cannot do all three screets(2 monitor+1laptop internal) together... is this a 8400 limitation?
// the 19" is part of a desktop that i'll leave at home...if this is the case, i was planning to bring the 15" monitor to my dorm and buy a 22" new LCD to dual screen ...
is it possible to triple boot? because windows xp don't have all drivers yet so i need vista and windows 7 as backup till i collect all the drivers for my studio 1555.
View 3 Replies View Relatedowner of DV5T 1009TX, i have a singular 320GB WD on this system, with dual boot enabled (WIN 7 and VHP) thing is i would like to triple boot this systm with an instant on OS (i know presto but it's a paid subscription and sadly does not allow me to access NAS/ battery profiles) so i was thinking of (and do have) a 8GB SSD 34 express slot flash drive (which has a USB 2.0 bus on te motherboard) to install a third OS Ubuntu
can't do any of the termainal , scripts based stuff
but i would need to know how it won't bother the MBR shared by M$ OS
i have the CD from cannonical featuring the latest 9.04 distribution of ubuntu
direction of a good guide that will allow for triple booting.
Yes I use Ubuntu in VM ware but would like to try it natively on a MBP.
I need to replace the LCD on my M1330, I have never replaced an LCD panel in a laptop before but upon researching it seems it should be simple enough..
I currently have a Chi Mei (CMO1309) but upon researching replacement screens on this site, have decided to purchase the Samsung panel part code (tm107)
My question is, will the inverter I currently have work for the new panel?
i recently ordered a dell xps m1330 with led screen and got it today (after 2 weeks) but the screen seems awfully thick. how do i know i got the led and not the standard screen (which is about $120 cheaper)? also, there is a large and visible scratch on the left side of the aluminum palmrest that really gets on my nerves.
View 9 Replies View RelatedWhat would I need to upgrade a CCFL LCD to the LED? This is what I know I need so far
LED screen
Thinner LED version lid (GX172)
LED version bezel (RW485)
LED video cable (GX081)
Is that all?
I got a XPS m1330 with an LED screen. On low brightness, I can see dark spots across the bottom of the screen.
They are usually visible on a white background, like in "My Computer" window. So, I had my screen replaced and today the tech came out and put in a new LED. I am still having the same issue, so I am wondering if they are all like this.
I bought myself a Dell xps m1330 when I was in Japan last year and it's been rather troublesome. (I had to replace the hard drive.)
The built in monitor has recently died much to my disdain. I have a spare monitor lying in my room that would work. The thing is that when I start my laptop,
I can't get the display to transfer over to my old monitor. Is there a certain key combination I can press on startup to make the display go over? My nvidea control panel has the ability to choose a preferred monitor but I can't see to get to it..
I've just noticed a dark line has appeared on my M1330 led screen- right across the top.... it goes right across the screen and is about 3mm thick.
You need to look right at the top (above the XPS M1330 text). It's there all the time! What can I do?
So I received a friend's XPS M1330. Who got it back from dell for motherboard replacement (gfx card problem).
It was working great till one day he boot it up and the screen had nothing on it. The laptop runs with an external display connected. The warranty expired nearly a month ago =/
How do I know if the screen is completely dead, or that the inverter or backlight died. If the screen is still alive can i simply replace the inverter or backlight? How do i test that the screen is fully dead?
quick question about XPS M1330 - what is the easiest way to check is the screen LED or not please?
View 7 Replies View Relateda while ago i accidentally cracked the screen of my Dell M1330 (im a student by the way it was a present i should have been more carefull with it i know i am gutted )
the laptop itself worked fine for a while after that apart from the blemish of the screen itself,
it was only untill recently that after a while the screen turns a shade of greeen with lines down it then resets itself only to be just white, it works about half the time i try to turn it on now
i was wondering what my best course of action would be, i have heard very bad things about dell's OWR and i cant really afford to pay a lot for repairs?
I've been re-installing Vista on my M4400 (LED RGB Screen) and it Looks to me that it is just not as White as the LED screen on my M1330.
i just love the sharpness and whiteness of the LED (Sec5441) of the 1330.
The M4400 screen is very nice and all that and the color is much truer - but it is just not white.... Have the same problem on my Dell 2408wfp - its just not white.
I like repairing laptops as a hobby. I recently bought a M1330 laptop without a screen and with a small video card problem. The laptop still worked on external screen, but showed some lines.
This was due to the NVidia gpu problem. I managed to fix it by using a hot air soldering station(Youtube video). To decrease the chance that it arrises again, I also did the copper mod(description). This meant that I could finally use the laptop for my work if I could just install a LCD screen.
Since I have spend quite some time on repairing the laptop already, I decided to invest some additional money to upgrade from a CCFL to a LED backlit LCD. I ordered a new cover, screen and LED LCD cable.
When I assembled all the parts, everything fits perfectly .....
Is this by design? I never noticed it before, and I'm wondering if it's always been that way, or if something has recently gone wrong.
I have it set not to go to standby or anything when I close the lid, but it seems like it should still turn the backlight off to conserve battery.
I formatted windows on my M1330 and tried installing XP x86 however when i put the disk in and boot from CD it starts the windows process and when it says 'Windows is starting..
it will hang there for 40 seconds then a blue screen will appear saying..
The operating system is loaded, and the computer (XPS M1330, Service Tag 7GQ814J) monitor glows white. Then appear on the screen gray vertical stripes. Until this fault computer worked with green vertical stripes on the screen.
View 3 Replies View Relatedmy 2 year old m1330 no warrenty just 'crashed' two times within 1 hour.
Both times, there are black screen with small boxes (1 x1 ") of like green and grey colors. No vertical lines.
What does this mean?
I just changed hard drives.
would this be a video card failure, hdd failure?
I have an XPS M1330 purchased about 2 years ago.
The screen went extremely dim permanently one day when the battery reached its near absolute low. For some reason the screen came back to a brightly lit life after a system restore. The same problem occurred again and sadly after sitting on it a few weeks I did not have a restore point old enough to troubleshoot with the same solution.
Now I'm not sure if system restore really had anything to do with the monitor crapping out because I've never heard of such a scenario, but I'm just going to throw it out there on the off chance that it does .....
I formatted and did a fresh install of windows 7 RC x64. All devices were discovered.
I was having issues with the touchpad not responding after every other reboot so I installed the vista x64 driver from dell website. That resolved that issue.
Now I have been having constant blue screen 9f bccode crashes while the laptop is sleeping. When I open the lid I need to power on and it says windows shutdown unexpectedly
Lately my laptop would freeze and I could see faint white lines only at the top of my screen. (lines do not go all the way down) This has happened twice in a day. Ctrl Alt Del doesn't work so I have to power down the system and it runs normal after that.
I'm really afraid its the dreaded vertical lines issues. I had my mobo + GPU replaced a year ago, still under CC warranty but its such a pain.
I am wondering if anyone know whether dell fixed the video card and heating issues (like many in this forum mentioned) yet?
I am very interested in this machine but I don't want to risk buying something that would burn out later. I am also interested in the new studio XPS 13 as well though I would love to know how it handles heat and the video card (i hate burned-out video cards..
i have been having problems with my xps m1330 ive had it for 3 years now and its been decent to me... 3 months ago when my warranty was up i sent it in to get the gpu and mother board replaced because of the warranty. Just recently it started acting up bad...
Would freeze left and right start running check disk when i tried to restart it...so i decided to reformat it seeing some scan i ran in dos was saying i was missing a system file. So i cleared the c drive and installed vista fresh... re-put my 60gb of music over and everything seemed fine for 2 days... not today it froze up on me ... i tried to restart and got a blue screen that flashed to fast to read and i tried to restart again and got a 2000-0141 error and alot of beeping and crap... so i restarted it and it was gone...
I've had my M1330 for about 1 1/2 yrs now. The first issue is that at one point 3 months ago,
I was being randomly electrocuted by my laptop when I placed my hand on the open space below the keyboard. About a few days after the random electrocution started, the battery died, and won't recharge at all.
Lastly, there is a constant whistling sound that was coming from the laptop ever since I bought it.
I'm out of warranty. Am I able to buy a new warranty for my laptop at this time or is it too late for me? And if it is too late, should I attempt to make repairs through Dell, or am I better off selling the laptop,
and then use the cash towards a lower pc, like those mini/EPC's that these companies are selling now?
Does anyone know if I can install 8 GB of RAM in my M1330? I now have 4 GB, but when upgrading to 64-bit I'd also like to add some memory.
I bought the computer in August 2008, and have the latest bios.
I think 800 MHz is the max speed I can use, does anyone know about any modules that will fit, if possible
First of all thanks to everyone who contributes on this board. The knowledge I gained is invaluable.
I upgraded from a T5800 dded Arctic Silver 5.
recently I've installed nVidea driver from MS windows update ,then the fan is always run, then I installed nVidea driver from dell support site, but still same thing.My bios is A09 ,
and have I to update my BIOS to A15 ? or keep it A09 ,because I thing it will afect the battery run time (i.e the fan need more energy and then battery need discharging quickly)
I recentley just formatted my M1330 and installed the AHCI driver but i am still getting BSOD right after the green bar on start up? The only way to get around this is to disable AHCI and enable ATA from the BIOS. Is there a solution to this
View 4 Replies View RelatedI have a new XPS M1330 on the way. I originally purchased a refurb. M1330 and had a few issues with it and dell agreed to build me a new(non refurb) one with same specs. (crimson,T9500,LED display,4GB's ram,vista ultimate etc.). In the meantime my company has ordered us new latitudes and I don't really see need to keep the new 1330. My question is, when it arrives should I not even open it and sell it either here or E-bay and my second question would be how much could I expect to sell it for ?
View 10 Replies View Related