I selected my language and the hard-drive then I click install then an eternity later right at the end of the uncompressing file it says
:Installation has been canceled>Windows could not instal in the selected language.
Where did I go wrong ? Do i need some kind of driver for the x25-m or could it really be the language or ..
My company recently bought 10 M4400 and they work good so far...not laptop freezing etc....but both myself and another guy have had our power adapter die on us.
View 10 Replies View RelatedI'm thinking about buying a M4400 with WUXGA 2CCFL screen.
I'm a web developer, so I need "space" on the screen for running programs as Eclipse, etc... However I'm a bit worried for if the fonts (reading text, typing code...) are very small.
I read that the Vista DPI scaling engine is really good and can solve this issue.
Could anyone attach some screen captures with 96 dpi (default) and 120 dpi, using Vista DPI scaling?
I just got a Dell M4400 with the FX 1700M card on Vista x64. It crash to desktop when I try to insert a view when in 2D.
Any experience with this setup? Error is systematic and return that Nvidia must close SolidWorks 2009 sp2.1 (error 13 from Nvidia)
I am not sure if I am the only one who had problems with the XPS 1640 so far. So I would like to hear your Dell Stories as well!
Uhm it all started with me unpacking the Notebook and noticing a french manual instead of a German one..
that wasnt too bad but once I noticed that the right speaker was not sounding too well (it sounded pretty messed up especially once I turned the notebook a little up)
When i load a disk the drive tries to spin up three of times but then stops.
I've tried several discs and it's the same each time so it's not the disc, only started happening today.
I've tried reinstalling the driver but to no avail. Maybe some dirt got in there? I read of some utility to test the drive but i can't find it.
So a few days ago I tried to boot up my machine and it did nothing after the BIOS screen. I had to hold the power button to get it do shut off. After a few minutes I tried to reboot and Vista tried to fix the problem which it indicated it couldn't. So I tried to do a system restore and it failed. In fact it failed on every point I tried.
The next day the system seemed to be running normally so I just figured it was a fluke. Then the next day Vista booted but I had no desktop icons, all programs initialized with errors and nothing was responding. So I rebooted and backed up my data.
I then downloaded Active Hard Disk Monitor and was shocked to see my Raw read error rate was 57% and my seek error rate was 66%! So I contacted Dell tech support and was instructed to run their diagnostics. The initial test indicated an inverter cable issue but the HDD passed all tests.
So my question is shoudl I be concerend about the SMART feedback info or should I rely on Dells diagnostics? My concern is that their diagnostics may only flag a problem if the drive is really close to death not just on its way. I plan on reinstalling the OS but don't want to spend the effort if this drive is going to be on its way out.
Got my XPS 1730 today and as soon as windows booted, the first message I got was that a RAID 0 drive was failing and I needed to back it up immediately. Does this mean anything? Do I have a defective part?
View 15 Replies View RelatedRecently my laptop's desktop and icons have started to flash randomly,things like the sound icon has a x on it.A couple of days a ago avast warned me about a win32:trojan(other) in 2 places.
I looked at dell's instruction to replce the gpu but i think it would be to hard for me to do and my warranty is over.
i think my 8700 sli is failing, a lot of stuttering and screen tearing. im gonna try to get it replaced, anyone know if this card is still available ? or will i get the 8800
i was disappointed with the 8700..
my m1530's 8600m gt is now idling between 69-73 degrees celsius, as opposed to the 58-65 it did when it was new. also, in-game temps are now well into the 90's. will be calling dell support this afternoon to have them set up a tech to come out and replace it.
View 10 Replies View RelatedI believe my video card in XPS 1530 is failing, from time to time i get half inch by half inch colorful checkboard pattern on part of my screen, usually shows up in the same place.
View 10 Replies View RelatedI'm experiencing some strange problems with my XPS1340 and I think it might be related to a failing harddrive.
The computer hangs quite often during startup or if I am installing/running programs. However, it seems to handle file copying with no problems - at least for now.
When it hangs, the harddrive LED stays ON, but the computer doesn't freeze totally and no BSOD. I can still move the mouse, but I can't open any programs or browse through files. After a while I get a message that Windows is not responding and I have the option to terminate the process or wait for it to respond. I can't click on any, though.
The only thing to do is a hard reset, and then normally the computer boots with no problems. If it hangs during startup I have to do the hard reset again.
As mentioned - the problem seems to occur only when the computer is installing a program / opening a program / starting up. I have just copied about 20GB to the harddrive to test, and it did that with no problems at about 32MB/s. Also - I can do "light work" like typing (I'm typing this on the computer)
I have tried to format and do a complete reinstall AND - Windows installs just fine - the problems begin when I start to install all the programs.
So.. Is this harddrive related, or could it be something else??.. I really think it's weird...
I got the computer about six months ago and until now I haven't really had any problems. I'm running windows 7 64 bit and the harddrive is a Western Digital (WDC WD32 00BJKT-75F4T).
my daughters Inspiron 1501 (just out of guarantee) when switched on the keyboard lock lights come on briefly as normal, the hard disc runs up, the screen
illuminate after a few seconds then the following characters momentarily appear top left of the screen- RS485/M BR#23931 -the screen blacks out momentarily then illuminates again.
Does anyone know what the message tells us . It took lots of restarts to get the full message and there may be mistakes in it .....
I feel that my 9400M G card is about to die, heres why:
When I upgraded to win7 I noticed a more blurry playback on same videos, and my card would always get stuck in a certain part of the video playing a sound "grrr wwaaa'' like microter, and then regain itself and very soon do the same again, and there isnt anything bad with the video because it would do it in different parts all the time.. Same even on dvd playback too...
So I tried all options, all drivers that are out, all codecs, then I came to conclusion that its win7 and the drivers arent perfectly made for it yet, So then I installed back Vista to resolve this issue once and for all.. Only today I find that the issue is back again... I cant watch any music video without it chopping the audio for like 2 seconds and playing a broken disk sound and freezing for those 2 seconds then playing again and about in another 30 seconds doing the same again.
So can some one tell me is this NVIDIA 9400M G that is gona die soon?
The video quality of dvd's is perfect other formats gotten a lil worse! but the audio making a horrible broken records disk and video freezing for 2 secons happens in all videos even dvd's, youtube, avi, mp4, mpg, etc....
My friend has Inspiron 9400 that's on its last legs, it keeps turning off at random times, graphics on screen sometimes become corrupted. The laptop does not seem to be overheating and the fans are clean.
We've contacted Dell as he has a 3yr Complete care package, he's had the HDD replaced multiple times. The last time he sent in the laptop for serving they returned it with nothing fixed, they said they replaced the fans but the fans are still the original ones as I accidentally scratched the bottom side of the fans and they're the exact same one .....
ok so the title says it all im getting all the vertical lines, this ty 200 dollar ddr2 card was the worst purchase for this laptop.
Read all threads about dells extended warranty for this issue.
everyone talks but is there a way to get it replaced by dell
I called customer service, the well known joke of dell, and i hung up on them about 5 min into convo.
I got my HP DV5t about 4-5 mos. ago. The graphics card which is a 9600m GT is definitely starting to fail. When ever I start to play graphically intensive games like COD4 or CS 1.6 the screen begins to freeze and the computer says the display driver failed while other times it causes a BSOD. This used to happen occasionally about 1-2 mos. ago but now it happens very often. I updated my drivers as soon as I got the laptop and always lifted the back for better airflow while gaming but apparently it didnt help.
View 10 Replies View RelatedI am pretty sure the optical drive on my MBP is failing as I am having trouble installing software like windows, office for mac, and just burning stuff. So, I did a search here and look it up at ifix it, but I am not sure what is the right model I should be looking at. I have the first gen MBP with the Core Duo CPU. iFix it lists two models UJ-857-C and UJ-867. So, will both work or is one of them only going to work? I know my original optical drive could not burn DL dvds, but it seems like both of these can though?
View 6 Replies View RelatedInspiron Ultrabook 15z 5523...A few of my keyboard keys, including the spacebar, stopped working for 48 hours (estimate). I tried everything I could think of and everything support told me to do. restarted. nope. support program that checks keyboard: nothing. Suddenly keys work again, but in the process Dell sent out a guy to replace the keyboard. He replaced it. The new keyboard just did the same thing. Must be a hardware, motherboard issue or something. I need this <ADMIN NOTE: Substitute character removed as per TOU> computer for design/developing/school/projects.
View 1 Replies View Related8204 just started to die, thought it was my new hard drive (which I was peeved about) and then realized it's actually the fan that's dying.
I know you can get a new thermal unit (including fan) for about $80, and I know that there are good numbers of laptop coolers out there, does anyone have a POV on the best bet?
I just discovered an interesting issue after undervolting my DV9700's CPU and overclocking its graphics chip but forgot to post it earlier. When playing GTAIV (which is extremely GPU intensive as you know), the whole notebook will get warm. I already know from FurMark that my 8400M GS will reach 80C in its current configuration so i can understand why the thing gets warm. However the fan always runs at minimum speed when playing GTAIV...
This leads me to believe that the cooling fan is exclusively controlled by the CPU temperature. It wouldn't matter if the graphics chip would be on fire - the fan will still not ramp up unless the CPU reaches the temperature threshold. I'll check exactly what these threshold values are later, but i remember that on my DV5 it's 75C for high and 85C for maximum. The fans on these things have 4 speeds IIRC.
Now, my DV9700 is a large and rather solidly built machine. It easily copes with the heat even with the fan turned down, i have no issues with GTAIV or any other game, and if you recall it had a faulty fan when i got it yet it was still able to work for 20 minutes before reaching shutdown temperature.
But if this is true for all laptops, i can see why these GPUs fail. Notebook manufacturers should consider implementing a fan controller that reads from both CPU and GPU sensors.
I recently reinstalled windows XP though I dont know if that has anything to di with this, I didnt notice the problem till a few days later so I tend to think not. BUt now there is only a slight difference in screen brightness when I plug in as compared to on battery. I wonder if my backlight is failing.
View 6 Replies View RelatedMy HP Pavilion TouchSmart 15-n071nr Notebook PC is not working I keep getting failure ID QC473F-6T776L-MFPWWK-60TH03 And I don't know what it means also my Short DST says Failure...
View 2 Replies View RelatedAlright, so I bought an Inspiron 15 7000 series laptop in October and I have two main issues with it.
One is that the w key keeps falling off. The plastic hinge thing underneath is broken.
Second, I think the hard drive is failing. It's making weird beeping sounds, clicking, takes a long time to boot up, crashes occasionally and moves icons around on my desktop every time I start the damn thing up.
My question: what can I do about it? How do I go about getting this fixed? I love the laptop aside from those problems. Is it covered under warranty? Do I go back to the store I bought it from, or do I just work it out with Dell?
I have HP ENVY 15 - j137tx, that came with the cyberlink photodirector. It was working all fine, but then I upgraded it through the hp assistant portal and now it just fails to load.
I reintsalled it through the hp recovery, but still it doesnt start up. I tried uninstalling it and i cant even uninstall it through the control panel add or rem prao.
It says:
ERROR Number: 0x80040702
desc: Failed to load DLL: RegKey64Bit
The sound is failing intermittently on my T430.
Closing then opening the lid to enter and return from hibernation sometimes restores sound. When this does not work restarting the machine usually restores sound. But the sound fails again after an indeterminate period.
Opening Ubuntu Linux in Virtualbox now displays the message "Some audio devices (PCM_in, PCM-mic) could not be opened".
Lenovo ThinkPad T430
2344-DAG
Intel Core i5 3230M CPU 2.60GHz
8GB RAM
Windows 8
I've a ProBook 4530s core i5 radeo graphics and have installed windows 7 professional 64 bit. i now want to install the graphics driver (radeon) but am failing, the laptop if i try to install will not boot or it shows a blu screen of death. the bios version is F.40. how to i get around this problem...
View 1 Replies View RelatedSo i recently upgraded my Aspire 5560g to Windows 8.1. I liked it but it seemed to have lost my drivers in the process (my track pad scrolling didnt work and my Dolby audio origram was gone).
I went to for the drivers and decided to start with a firmware upgrade (9545 for hard disk performance).
After the computer rebooted, I entered the dreaded Windows 8.1 boot loop. It would say "Your PC ran into problems..." with the bluescreen, then turn off. Then it would attempt the Automatic repair, and fail again, then restart the cycle.
I wasn't able to even get into my BIOS until I cleared my CMOS, now at least I can get into BIOS.
I created a bootable USB for Windows in hopes I could do a clean install, but even when trying to boot from a USB I get the blue Windows 8 screen, "Your PC ran into problems..."Is there a way I can undo the firmware update, it seems like the culprit, doesn't it?
EDIT: I've read that the Windows boot loop may be caused by outdated drivers. Think this could be the problem after I did the firmware update? How can I install the drivers without being able to boot into Windows?
Have an Aspire One model ZG5 AOA150-1570 running winXP.
The hard drive has had a failure and after running disk checks (dskchk) using a special mini XP boot CD, I was able to view and copy my important files, pictures and videos to a thumb drive. Now I need to replace the drive but can I somehow use the directory and files of the protected area/hidden partition on the bad drive and copy that to a new drive and use those files to restore to initial specs on the new drive using e-recovery. I can use the alt-f10 to boot to the e-recovery on the bad drive but since the drive is bad I don't want to revert to factory specs.
Again can I install a new hard drive and somehow copy all the files needed (what files would they be?) from the old drive to the new drive and then run the e-recovery restoring the computer to factory specs with this new drive installed??
If for some reason I can't do that or if it fails while trying I can always reinstall with a new installation of XP.