I connected my HP 2000-2d51SV laptop to my LG tv , but I get a response that there is no signal.I tried the laptop's control panel , but i do not see the tv as extra monitor.On the TV the HDMI port can be pressed ( is not blury like the other ports with no connected cable ).I also tried the other HDMI ports of the TV..I have windows 7 installed.
View 2 RepliesI have a Pavilion dv6 with windows 7 operating system. the cable works with my friends computer to the tv but not from mine to the Tv.
View 9 Replies View RelatedI have a hp probook i3 4320s, and recently i buy a new lg led tv, my problem is my new tv cant get signal from my laptop....
View 6 Replies View RelatedI have a laptop HP Pavilion g7. Windows 7 Home Premium 64-bit Service Pack 1Intel (R) Core (TM) i5-2450M CPU @ 2.50GHzGraphics Unit 1: AMD Radeon HD 7400M Series Graphics Unit 2:Intel (R) HD Graphics 3000All the driver has been updated weekenden-
My problem is that I do not get the picture up when I connect it to my Panasonic TV, both during display settings and sound can see my TV, but there No picture, have tried all display settings that are possible?but it works without problems on 32 "and 40" TV but not at 46 smart TV and my 50 "TV
Ok so the Studio 1737 premium display is the RGB LED display. Using LED's.
For example even high end HDTV's the most expensive $4,000 Samsung using LED back lighting lists a 2ms response time.
I have never seen such specs mentioned for the 1737's RGB LED display.
I know it has to be fast, because on my 22" Samsung LCD which is back lit using conventional CCFL has a 2ms response time.
and when I connect my 1737 to my 22 LCD via HDMI, I can tell that the response time, on the 1737 is faster, my guess is because of the LED's can adjust or turn on off faster than CCFL.
I have a HP Notebook 2000, with Windows 8.1. At some point, the hdmi output to monitor stopped sending an audio signal. The video signal is fine.
It is labeled in Device Manager: 1-STD HDMI TV (AMD High Definition Audio)
The monitor and hdmi cable work fine with other computers. I have disabled/enabled the HDMI device, and also updated drivers (Windows says my drivers are up to date).
my hp 2000 laptop doesn't recognize tv with hdmi cable. I get the "doesn't recognize any other monitor" error when I attempt to "detect".
I recently upgraded to windows 8.1
I have the AMD Radeon HD 6310 Graphics
The TV is a Hotel Phillips HD TV.
My game system works using VGA cable
I am trying to connect a dual monitor but it keeps telling me no signal. i don't know what to do.
View 6 Replies View RelatedI have an Aspire V3-571. Please see summary below in bullet points:
1. Used to work fine when connected to my TV (via HDMI cable)
2. One night, when laptop was connected to TV, picture started flickering
3. After 20 minutes, HDMI signal cannot be detected from the laptop
4. Updated Intel HD Graphics 3000 driver (Date: 1/29/2014 Version: 9.17.10.3347)
5. Tried using different HDMI cables
6. Pressing Fn+F5 does not do anything
My TV's HDMI port works with other devices when connected to it. What am I missing here? Is there a hardware defect with my laptop?
I'm using an HP 2000 Laptop running windows 8.1, my problem is that bluetooth isn't working anymore I don't know what the problem is, the option for ''allow a device to connect'' isn't working its in grey colour I cant enable it.
View 5 Replies View RelatedI have recently purchased Dell Inspiron 15R 5521N laptop with Windows 8 Pro. When I try to connect my laptop to an Acer monitor with an HDMI cable, it gives me a no signal error. But when the same laptop is connected to a Philips monitor using the same cable, it works perfectly. As usual I thought that the monitor was the culprit, but when I connected another laptop to the Acer monitor using the same cable it worked without any errors. So where does the problem lie. The HDMI cable is OK, the laptop is also OK as also the Acer monitor?
View 3 Replies View RelatedI must be missing something -- I'm trying to connect my E535's HDMI output to the HDMI input on my Panasonic Viera LCD TV. I've attached both ends of the cable to the corresponding ports and I get nothing. I select HDMI 1 or 2 on the TV, and still nothing.
I've also tried toggling the F6 display selector key, although I believe this is active only when using the VGA port, correct?
The Lenovo manual is pretty sketchy on the matter of DVI, so what I have to do in Control Panel or elsewhere to get the computer's display on the TV with HDMI?
I am having problems connecting an external monitor, Dell 2709W, to my Elitebook 820 G1.
I have an Intel HD 4400 graphics solution. The monitor says:
Out of range signal
Cannot display this video mode
change computer display input to 1920 x 1200 @ 60Hz.
I use a Display Port cable for the connection.
My OS is Win 8.1 64bit
I have used the HP support assistant to update all hardware drivers...
I have a studio xps 16 with the Radeon 4670. When I connect my laptop to my 37 inch HDTV via HDMI, the image does not fill up the TV screen. Is there any way I can adjust the resolution?
Also I have downloaded a couple of 1080p movies, but again they do not fill up the TV's screen, and don't look as stunning.
I don't understand why it wouldn't fill up the TV since if you burn the movie onto a blu-ray disk or dvd, it would look stunning on the HDTV.
Specs: Dell xps l501x laptop
windows 7 home premium 64 bit
AOC monitor (no issues here)
Irecently bought a new AOC monitor 6 months ago and it worked flawlessly up to two weeks ago when it suddenly stopped working with this laptop. monitor still works great through HDMI with my brothers mac and with a seperate Blu ray player also via HDMI. so its not the monitor or cable that is causing the problem.
the driver for the monitor is installed correctly and all the extra graphics drivers such as nvidia have been uninstalled and still the screen shows 'no signal'
I suspect the issue is with the HDMI driver which i have not been able to find a driver for (i recently reformatted my laptop and had to re-install all drivers even for USB ports and mouse ) however reformatting the laptop was done in an attempt to solve this issue.
i have installed win7 64b on HP nc8430 ..when i c onnect to external LCD it says no signal do i have to load AVG drivers ?
View 7 Replies View Relatedi have HP 2000 notebook and all of a sudden HDMI port stopped working. Factory restore and a chipset driver worked and it started working. my bad, i installed a graphics driver, that took me back to sqaure one. HDMI port on the laptop is not working. HDMI cable and TV HDMI port is all working.i ran HP support assistant and it shows all required updates are in place. though it worked in between, it should be an issue with the chipset driver.
View 2 Replies View RelatedI have a Latitude e6510 display port. The graphics card that came with the laptop is Nvidia NVS 3100M.
My display port does not output. External screen just says <No video signal>
The Nvidia control panel can also not see any other monitors.
I have tried this with multiple displays. I have updated to the latest drivers for everything including Nvidia.I ran the scan system for driver updates utility from Dell.
How do I get the display port to start outputting. Is there some special driver that is needed?
I have a Lenovo ThinkPad W540 running Windows 8 (64 bit) connected to a ThinkPad Pro docking station and hooked up to a 24" widescreen monitor.
All was working perfectly for the past couple of days (since I got it) until today when the monitor will go blank, display a 'no signal' message, the laptop screen will flicker then after approx 15 seconds all is back to normal excepting the following message is displayed:-
I've tried clicking Yes and No with no permanent lasting improvement!!
My tv tuner INTEX IT-TV 150 FM plays only audio. The screen turns totaly white with no video signal. When calling the supporting staff at INTEX, they told me to install HP Pavilion dv4 video driver. Could this be the solution? If so, where could I find the video driver?
View 1 Replies View RelatedI have HP Pavilion 15 p000su with HDMI port and tried to connect it via HDMI-VGA cable i bought and it didnt connect.Can't Indentify it(find it in the screen options).I need it for work also tried it at home to connect it with my TV with the same cable and still not finding it... I'm really not much in this cable things and asked a guy who told me about this HDMI-VGA cable.He also tried to connect it with 2 cables one vga and one hdmi with some adapters, but the projector wasnt connecting.The drivers are correct and everything else is fine.
View 3 Replies View RelatedI have a brand new TV with USB, RS232, HDMI connections and of course with a screen in16:9 aspect ratio. I want to use my existing RS232 cable to connect my T430 to the TV and display videos/movies that I want to view with others. HOWEVER, the video output always gets a black bar top and bottom from the T430 when the TV is connected. As a result, the image is stretched side-to-side both on the TV and on the T430 simultaneously showing the video. It is ugly. If I watch a movie in the very wide movie format 2.35:1, the bars are of course even larger and the movie is simply unwatchable it's so thin, top-to-bottom.
This is true regardless of the video source on the T430, either a movie via VLC or MediaPlayer off the hard drive, or streaming.
Two odd things: it does not happen if I play a movie on the TV directly from a USB key - it has a USB port and that works just fine. Also, if I simply unplug the RS232 from the TV then everything gets restored and the image on the T430 is perfect without any bars top and bottom.
In summary, a 16:9 video source connected to a 16:9 TV via RS232 is given black bars top and bottom, and there is no control on the TV that can correct this (TV has two settings for RS232 display, 4:3 and 16:9. 4:3 actually displays the 16:9 ratio correctly, but with a large black frame around it. And 16:9, the "auto" setting, gives the problem above).
So I have two questions:
1. Is there a setting on the T430 that I can adjust to resolve this issue so that the black bars are suppressed for 16:9 video replay?
2. If I switch to using the more expensive T430 minidisplay output (via an HDMI adapter) and connect that way, is it likely to fix this issue? I don't want to go to the expense of the adapter and HDMI cable if it will give essentially the same result.
This only applies to videos. That is, when I close down the video, the 16:9 desktop that shows on the TV is identical to that on the T430 and aspect ratio is not squished on either display.
So it's something to do with how the machine sends out the video streams via RS232 that's screwed up somehow.
I just opened up my HP Pavilion Touchsmart 15 Sleekbook and I want to connect a 2nd monitor to stretch my desktop. I have a Dell monitor that I've been using for a year or so with a VGA connection. On my new Touchsmart there is no standard vga port.
In what ways can I connect it?
I have a hp 2000 and use internet explorer, google and bing. I have windows 8. I have been getting a green screen on all videos. My audio is there. Started a 2 days ago.
View 5 Replies View RelatedHave used my HP 2000 laptop many times to connect to a big screen TV using the VGA output jack and hook it to the VGA input of my big screen. Now, for some reason, there is no video output to the big screen, I have tried 3 different cords (VGA to VGA) and get nothing on two, and on the third I get a video transfer but it blinks off and on both on the monitor of the laptop and my big screen with only about 1/2 of a picture showing on both. When it did this, I tried repositioning the output jack on the computer output and it changed the picture somewhat, but could never get it to work.
View 2 Replies View RelatedHP 2000-2d28TU Notebook PC runnig Windows 8.1.
Having problem with brightness some times brightness gets high and low auto. Mainly while watching movies. Also some times after turning on Laptop from hiberation it shows high brightness and if I try to decrease brightness it doesn't show any brightness level. My Laptop is under warranty.
I bought a dv3t-2000 two months ago and recently i installed windows 7 and i just realize that is not possible to change the brightness on the screen, is always the same. I have tried changing the power plans, I've upgraded the BIOS, but so far is not working.
View 9 Replies View Relatedi have a hp2000-2c29wm and every time i put a dvd in it won't play but when i try a cd it plays it perfectly.
View 1 Replies View RelatedThere are function keys on my 2000-20a20NR notebook PC for brightness, but no buttons for contrast. How do I adjust the contrast? (Running Windows 7.)
View 3 Replies View Related(HP 2000 Notebook PC / Windows 8.1, 64 Bit) Blank screen always, external monitor works fine. What components could be malfunctioning? This occured about six months ago, approximately one week after the one year warranty expired.
View 9 Replies View Related