I just upgraded my compaq presario 2500 bios (the exact model is 2505EA) from KF.F.5 to KF.F.14 and the flasher didn't make a backup now the computer doesn't detect the momory upgrade I have anymore, it only detects the stock memory, so if anyone upgraded his/her computer bios and has a backup copy of bios version KF.F.5 and can direct me to a download link I'd be very grateful.
View 6 RepliesI just restored this computer with the factory reset and with the bios password the system diabled key is 59036668.
View 2 Replies View RelatedMy compaq presario cq 60 i have forgot the bios password (Enter Administrator password ?). after 3 attempts i got a code 63186857 ...
View 2 Replies View RelatedMy troubles are as follows:
I started working on a presario v6130us laptop with a blue screen. The owner thought it was due to a virus when she opened a email. I went and wiped the HD and reinstalled windows XP pro. Had the darn thing working nicely.
Then I thought he computer was running a lil slow, so I decide to update the bios. From (I believe) v.07 to ver.29 from the hp website. At the restart, it never restarted, so I restarted it by pressing power button. Went into the same ol blue screen loop. The stop message is 0x0000007b. I looked that variable up on the microsoft webpage. It says it is a Win 2000 unmountable boot device. Prior to this message it was Stop 0x000000ED.
Does anyone know how to roll the bios back, or what could be causing this problem? I have done a quick HD test. so far it has passed and is now doing the "executing" test @ 20% complete. B4 the bios update, the test would say FAIL 1- 07.
I have a presario cq62 and access to my bios is disabled my code is 56773307
View 6 Replies View RelatedI don't remember the BIOS password.How I can do to clear this pw?
View 9 Replies View RelatedI have an COMPAQ PRESARIO CQ61 and suddenly is asking me for the admin bios passwordAfter 3 failure trials, it shows a code "76317137".
View 5 Replies View RelatedI have a compaq presario CQ56 - 154CA laptop. I wiped the hard drive using DriveCleanser in TrueImage Home 2011 and then attempted to load the recovery manager with F11 (or F10 or whatever it is), but now all I get is a red screen with the big Q logo with "press ESC for startup menu" on the bottom left and it just hangs there. I did wipe the Win7 and the System partitions, but not the Recovery partition. I did do a backup of those 3 partitions onto my external drive, but the laptop won't boot from a bootable flash drive I made in True Image, nor any of my boot CD's. And I did set the bios to boot from flash first, then DVD, then hard drive before wiping.
Â
I didn't make the recovery DVD's with Recovery Manager in Win7, but I shouldn't need them since the Recovery partition is still there.
Â
I've read that some Compaq laptops use a utility on the hard drive to load the bios, startup menu etc, so if that is the case with mine then it was thoroughly deleted. If this is the case, is there any way I can get it back on the drive?
Â
If not, I could try to remove the drive and put it in an ext enclosure and hook it up to my desktop. It's possible that I can use the flash drive to use True Image to restore the two wiped partitions. Also, I've read that in this instance, removing the drive and then turning on the laptop may allow the bios to load, but I'd really rather not take out the drive if I don't have to.
my sound on my laptop just suddenly stopped working and it was fine last night. Sound does not come out of the speakers, headphone jack, nor can I record using on board mic or plug in mic. I have reinstalled drivers, used system restore and did about everything that I could think of. The exact model number is HP TX 2513Cl. Any help would be much appreciated as I do not have time to send this tablet in for repairs. (and I can't even imagine how long I would be talking to HP either)
View 3 Replies View RelatedSystem disabled after 3 tries, it keeps showing 68235122
View 2 Replies View RelatedI have a Compaq Presario CQ57-339WM and it won't boot.I tried to restore it, but I can't get into the bios to let it boot from CD.It says system disabled 59088611  after 3 failed attempts.
View 9 Replies View RelatedBios password not working- system disabled code 70724054
View 3 Replies View RelatedI have a Compaq Presario CQ61 Product: VM9496Q2X Model: CQ61-319WM, that has a black screen when I power up. Â The wifi button stays red and the caps lock flashes twice. Â I believe this indicates a BIOS corruption failure. Â I have tried resetting by unplugging and removing the battery, and holding the power button for 30 seconds. Â I have tried the f8 key and the esc repeatedly at power up. I have also tried pressing the windows and B key along with the power key but nothing worked. Â
View 2 Replies View RelatedI recently noticed that my 2530p (great laptop btw) runs about 10 degrees hotter (53-55C versus 40-45 C just idling) when it's in the dock as opposed to when it's just on my desk. Normally this isn't really a problem but when doing anything remotely taxing on the processor the CPU temp shoots up to 60-70C when it's in the dock.
So I searched around and there seems to be no mention of this anywhere on the Internet. I figured it might be an airflow issue. So, pulling the base off the dock it appears that the supposed vent through the right side of the dock (where most of the airflow is supposed to run) is blocked almost entirely by the sliding latch mechanism.
Is this just terrible design or is something broken? I considered drilling holes through the latching but it looks like there's flat cables running all over it.
Does anyone else have a 2530p with the 2400/2500 dock, and if so, do you have heatflow problems? Have you found anyway to fix them? I tried raising the dock up off my desk but that doesn't seem to help too much.
Bonus question: The S-video port on my dock doesn't work at all. Is this because the 2530p doesn't output s-video, or is my dock just broken?
i have a compaq presario CQ42 . today i has disassembling my laptop and applying thermal paste on cpu and gpu . so , the problem is when i play games about 5min or 10min my laptop suddenly go on sleep and shutdown itself then i try to restart it and after that i get this message"The system bios has detected your notebook PC was placed in hibernation to avoid overheating .The system is now operating normally and your data should remain intact. Overheating may occur if the cooling vents are blocked or the operating temperature exceed the specification. The notebook PC should return to normal operation once the situation is resolved.
View 9 Replies View RelatedMy Presario CQ57 started asking for a bios password and I have never set one. When i enter wrong one 3 times it generates this error code 61229567.
View 1 Replies View Relatedjust installed fx2500 into my 9400.. everything working great..
What should I expext the temps to be running at ... Seems hot... I could keep my 7900gs under 60c by keeping my 18kgui program runnin fans on high while playing Cod4 or CS:s... now the gpu peaks out at 70-72c...
I have a 9400 and i just bought an fx2500 ... bought the PA-13 130w power adapter... I have modified the pieces that need to be snapped off in the casing... all ready to put in the card...... when i fire it up WHAT DO I DO? And how will i load the Drivers... AND,... AND what drivers
View 12 Replies View RelatedJust recently upgraded my E1705 with a FX-2500
Flashed the unlocked BIOS with the 1.24 v GPU 500 -1200 clocks
3DMark06 came back @ 5180
Just wondering how this matches up with others here with a simular setup.
I wish to upgrade my laptop dell inspiron 2500 cpu processor which at the moment my laptop runs on a just under 1 ghz processor [pentium three] chip.does anyone know my limits on what i can upgrade to as in a faster modern processor chipset compatible with my motherboard and without major soldering or mother board changes.
View 4 Replies View Relatedi have an m90 t520 with 4gb ram and fx2500m,runing vista ultimate with dx10.
i try to run crysis and i cant get it to run with very high and on high it barely runs, i updated my gpu nvidia driver to 7.15.10.9808 , and still cant run it good , i tried to get a modified inf but my laptop kept on giving me the blue screen and crashes everytime i try to run crysis or even 3dmark06
if anyone can provide a working inf or a good driver with the latest inf modified installed that would be great.
and maybe an answear on why i can run the damn game on very high with dx10 even though my laptop is more then qualified to run it
dell m90 , t5200 core 2 duo,4gb ddr2 5400,nvidia quadrofx2500,wxga+ 1440.900.
I have got Notebook Compaq Presario.. I cant connect to the internet using the wireless connection.. the reason is that i accidentally did some operations, and cannot switch on the light on the front panel of the notebook.. it does not work, i mean the light of the wireless connection button does not light.... I turned off something...
View 8 Replies View Relatedi have a v3019us and it will not log into windows. It goes to login screen, enter password, then it says its loading settings but flashes straight to logging off and goes back to the login screen. it has xp home edition, and does the same thing in safe mode. tried restore disks but pc is telling me restore discs are for wrong model.
View 4 Replies View RelatedMy ancient C500 fan is noisy, a constant slight grindy noise. Its been like this for months and I cant take it anymore. Can I clean or replace it w/o too much trouble or is it time for a new laptop? Looks like I'd have to take off the whole bottom to get at it...which Iwill do, if it will shut the damn thing up.
View 4 Replies View RelatedMy LCD is like this when it's opened less than 90 degrees.
My LCD is like this when it's opened greater than 90 degrees.
I'm forced to use this computer in awkward position since i can't open the lid greater than 90 degrees
i have a compaq presario 1500 with a pentium 4 running XP SP3 on it. I am having trouble with keeping it under a good heat, the fan is constantly running high! i know this needs a good clean but the screws to remove the back casing are so small for me to do this! any suggestions of how i can clean inside? or get to th fan through the top by the keyboard?
secondly it tends to crash every now and then, maybe when it overclocks on the cpu?? i am recently trying out a program called speedswitchXP which seems to be slowing it down to an extent! but not solving the issue.
thirdly and finally, my battery only holds charge for around 10 minutes before needing constant wall plugin! i constantly have it plugged into the wall, could this be a result to any of my problems?
got a Presario V2000 that will not boot whatsoever.
Upon pressing the power button, the machine starts up and displays the standard "Windows could not start properly" screen. Every option I choose, from the three Safe mode options, to the Last Known Good Config, to Start Windows Normally will not work.
I choose an option and everything goes smoothly, the Windows XP splash screen pops up & stays there for a few seconds, then goes blanks for a slightly longer length of time before a blue screen pops up. I can't remember the first few numbers, but the rest I'm pretty sure is accurate:
(a series of letters/numbers is here) (Registry File Failure)
The registry cannot load the file
SysCommandSysCom32ConfigSOFTware
or its log or alternate
It is corrupt, (something I cant remember), or not writable
Beginning dump of physical memory
Physical memory dump complete
Contact your system administrator or technical assistance.
.....and it pretty much repeats over and over in a continuous cycle like this until I power it off.
What I'm wondering is where exactly the problem lies? On the Hard Drive--where the drive itself needs to be replaced or the OS just wiped and reinstalled fresh.......or is this indicative of a hardware failure...which would mean this lappy is pretty much dead?
On pressing start button, laptop starts, but blank screen comes. After every few seconds, it keeps on rebooting, but nothing happens.
I have tried pressing F10 and Esc button on startup, but nothing happens.
Moving finger over multimedia touch buttons causes them to beep.
Few times, it shows the BIOS, but does not detect the hard-drive.
Very rarely, everything works fine and OS boots and works fine (without any sign of problem).
I replaced RAMs, hard-drive and DVD Reader in other laptop and there they worked absolutely fine.
I even tried removing the battery, connecting external monitor, keyboard, but nothing worked.
BIOS version is F.3D.
When opened, CPU fan and heatsink were dustfree.
Product Specs: HP Presario V6305NR, 1.6 GHz AMD Turion™ 64 X2 Dual-Core Mobile Technology TL-50, 1024MB DDR2 System Memory (2 Dimm), NVIDIA GeForce Go 6150 (UMA)
I have a Presario V2000.
After not using for about 1 week I turned it on so I could clean it from viruses.
Got the battery alert and then it shutdown meanwhile I was pluging the cord in (Targus AC cord with
blue light).
When I connected the AC to the power (not connected yet to the laptop) it "turned on" and still today
shows a blue light. But once I plug it to the laptop the blue light disappears after 3-5 seconds!
Not at the beginning nor the end of this process the laptop will turn on if I press the power button
for 'x' seconds. If I plug the cord, the computer doesn't show any "power light" and then the blue
light from the Targus AC fades off.................
I have a Compaq presario C500 laptop by HP....
When I bought this computer these are the specs:
***Processor: 1.6 GHz
***RAM: 512 Mb
***Video: Up to 64 Mb Shared...
***Battery: 6 cell Lithium battery...
***Hard Drive: 80 Gb STANDARD
What I changed to:
***RAM: 2 x 1 Gb = 2 Gb total RAM...
***Hard Drive: 250 GB 7200 RPM.....