HP/Compaq :: 2530p And 2400/2500 Docking StationAirflow And S-Video
Dec 2, 2009
I recently noticed that my 2530p (great laptop btw) runs about 10 degrees hotter (53-55C versus 40-45 C just idling) when it's in the dock as opposed to when it's just on my desk. Normally this isn't really a problem but when doing anything remotely taxing on the processor the CPU temp shoots up to 60-70C when it's in the dock.
So I searched around and there seems to be no mention of this anywhere on the Internet. I figured it might be an airflow issue. So, pulling the base off the dock it appears that the supposed vent through the right side of the dock (where most of the airflow is supposed to run) is blocked almost entirely by the sliding latch mechanism.
Is this just terrible design or is something broken? I considered drilling holes through the latching but it looks like there's flat cables running all over it.
Does anyone else have a 2530p with the 2400/2500 dock, and if so, do you have heatflow problems? Have you found anyway to fix them? I tried raising the dock up off my desk but that doesn't seem to help too much.
Bonus question: The S-video port on my dock doesn't work at all. Is this because the 2530p doesn't output s-video, or is my dock just broken?
View 10 Replies
ADVERTISEMENT
Jun 3, 2009
I just upgraded my compaq presario 2500 bios (the exact model is 2505EA) from KF.F.5 to KF.F.14 and the flasher didn't make a backup now the computer doesn't detect the momory upgrade I have anymore, it only detects the stock memory, so if anyone upgraded his/her computer bios and has a backup copy of bios version KF.F.5 and can direct me to a download link I'd be very grateful.
View 6 Replies
View Related
Feb 25, 2009
my sound on my laptop just suddenly stopped working and it was fine last night. Sound does not come out of the speakers, headphone jack, nor can I record using on board mic or plug in mic. I have reinstalled drivers, used system restore and did about everything that I could think of. The exact model number is HP TX 2513Cl. Any help would be much appreciated as I do not have time to send this tablet in for repairs. (and I can't even imagine how long I would be talking to HP either)
View 3 Replies
View Related
Aug 19, 2009
I'm really impressed with this computer (HP EB 2530p) but read in the review that the fan tends to get loud and that it get's fairly hot.
Exactly how loud does the fan get? I'm a student and I dont want to sit in a room with 200 other students looking at me and my loud laptop hehe. Is it really noticable/annoying when under medium load (word/excel + youtube perhaps)?
Also regarding these temperatures, does it get uncomfortably hot should you sit with it in your lap for an hour or 2?
I'm not sure if I beef up all the "cons" because I'm so picky, but if I am, please tell me to wake up :-)
View 3 Replies
View Related
Oct 1, 2009
I'm trying to install 7 on my 2530p. I checked on HP we site but no official drive for this OS. So I called the support and asked for more details. They said that there's no driver for the moment. Soon they will relase them. Now they suggested to use the vista buisness 64bit driver using the compatibility task. My question is about which driver should be installed and what is unnecessary.
View 7 Replies
View Related
Sep 23, 2009
I just got my 2530p. The problem with my 2530p is the fan noise. It is on constantly. I would think that the speed of the cpu fan should go up and down?
View 10 Replies
View Related
Apr 11, 2009
I am using HP 2530P at home and connect to wireless access point for accessing the internet services. Recently, I found my wireless connection icon in the system tray are shown incorrecly. actually the wireless controller card is conencting to the wireless router and no problem to connect to the external network (Internet), but the connection icon in system tray indicate the connection is disconnected like below. I am no sure it is a window vista problem or my HP notebook problem.
View 9 Replies
View Related
Jun 4, 2009
my 2530p
I finally fired up my computer, and instead of Vista it installed XP. In the box is a Operating System CD for WinXP Professonal as well and a Application and driver recovery DVD for WinXP. That should be the right CDs and only the OS on the computer is wrong. There's a Vista sticker on it, mind.
And no spamware? I got a trialversion of Office 2007 that I need to kick off again and the installation created a tiny 1GB partition which only holds some HP tools. Convenient. And the IE contains a spambar with google search, lots of AOL and some HP stuff.
Now I feel slightly annoyed that they added a UK plug to the parcel and not a European one eventhough I will need it anyway soon and for a longer time. Or maybe that is standard when asking for a UK keyboard and English windows?
View 7 Replies
View Related
Mar 24, 2010
I am going to upgrade my dear HP elitebook 2530P with an additional harddrive insted of my optical drive, So I where browsing the Maintenance and Service Guide [url] .
On page 68 - It says :
-----
Secondary hard drive cage assembly, includes additional USB port (required for installation
of secondary hard drive
492574-001
-----
Secondary hard drive connector board (required for installation of secondary hard drive) 495027-001
-----
Secondary hard drive system connector board (required for installation of secondary hard
drive)
495028-001
-----
I am going to install a normal 2,5" disk, so which of them do I need ?
View 3 Replies
View Related
May 20, 2009
after lots of considering and looking for alternatives I finally ordered a 2530p today. After all, I think this is the best notebook for me.
I never bought a computer where a full windows version is not available on CD and thus never had bad experience with lots of stuff preinstalled.
How bad are the 'extras' on HP business computers in Europe? And do you have any advice on how to clear the computer up and what to delete?
looking at the order sheet I'm a bit confused regarding the OS
OS: Vista Business wXPP OFC Ready 2530p O/S
Restore Media: DRDVD Win XP 2530p Recover Media
Restore Media: OSCD Windows XP Pro Media
My guess is that someone forgot to update the order website
View 3 Replies
View Related
Feb 20, 2009
I just bought a 2530p, with 1.8-inch 120GB hardisk. The partition is assigned as below.
- 101GB for C:
- 9GB for D: (HP_Recovery )
- 1GB for F: (HP_Tools)
I would like to replace existing 120GB HD with larger one, and would like to ask some question.
1. what is the largest size of 1.8-inch hardisk for 2530p? I refer to "Service and maintenance information" manual, the hardisk size seems only up to 160GB, could I installed 260GB or even larger hardisk?
2. Is it neceessary to keep the partition of HP_Tools or HP_recovery?
(if I delete the partition 'HP_Tools' or 'HP_recvoery', can the OS be booted up?)
View 7 Replies
View Related
Jun 2, 2009
I finally received my 2530p today, and it's a thing of beauty
The only slightly annoying bit is that HP delivered a British wall contact instead of a general European one, probably because I ordered a British keyboard. But I might still have a suitable cable somewhere, or use an adapter instead.
Anyway, Vista is preinstalled on this computer and I could also opt for XP instead. The manual doesn't say how to do that. Can smoeone explain to me how to install XP? Someone mentioned earlier that I should make a backup disk for Vista anyway. So what's the general workflow? Get the computer up and running as is, make backup disk, somehow install XP over it?
View 10 Replies
View Related
Feb 25, 2009
Today I got my HP EliteBook 2530p in "FU432EA" configuration. It was important for me to have an optical drive, so i chose the configuration with the 120 GB 1,8" HDD.
The 2530p looks great so far and performs pretty well... If there weren't the extremely annoying noises coming from the notebook.
The HDD with its 5400 rpm (it's a Samsung HS122JF, very slow btw, not really faster than 4200 rpm drives) makes a clearly audible, very high frequency noise and turns on/off every 30-60 seconds resulting in clicking sounds. I can live with that for the moment, because I'll upgrade to some SSD in the near future.
But the second annoyance is the fan inside the laptop. Even when idling in windows with temps below 50 °C the fan turns on every few moments. Unfortunately I haven't been able to control the system fan or even read the actual speed. I tried Notebook Hardware Control, SpeedFan and HWMon, but neither of them reported me anything about the fan. I tried undervolting the CPU with RMClock (which doesn't really support the new Penryn CPUs) and got a few degrees less, but this wasn't enough to keep the fan quiet. In the BIOS there are no options regarding the fan, only some "keep fan always running on AC power", which I disabled.
View 10 Replies
View Related
Aug 19, 2009
My problem is that my 2530p won't come back from sleep mode; the screen stays black.
As seen in this thread, [url] this is a known problem.
It seems that switching from IDE to AHCI will do the trick, but I have no idea how to do that without causing an other problem. I use vista.
View 10 Replies
View Related
Aug 20, 2009
I just bought a refurbished Elitebook 2530p that didn't come with a wireless card, so I bought a "Broadcom 4322AGN 802.11a/b/g/n Wireless LAN adapter (Sangria) - For use in Most of World (MOW)". This WLAN card was listed on HP's parts page for the 2530p here.
However, when I installed it and connected the antennas, the computer doesn't recognize it at all when booting up. It doesn't even acknowledge the presence of a new device.
View 8 Replies
View Related
Feb 14, 2009
I am comparing this against the connector in the 2510P to see if there could be a possibility of retrofitting the 2730P connector to obtain a SATA output. The 4200RPM ZIF drive in the 2510P is ultraslow and ZIF (PATA) alternatives in SSD or 5400rpm HDD form are poor value for money. micro SATA is the way to go..
Found the HP Media Library has systemboard pictures. The 1.8" drive connectors for 2510P, 2730P and 2530P are here:
Though it is somewhat difficult to make out the 2730P 24-pin socket. Can anyone take a photo of it and link on here? Here's the one for the 2510p
.
More pics at [url]
We can see that the 2510P ZIF socket is very different to the 2730P systemboard connector. BUT! There is the unused 24-pin socket on the 2510P that looks remarkably similar to the 2730P 24-pin SATA connector. Could this be used to provide SATA on the 2510P?...........
View 3 Replies
View Related
Dec 14, 2009
I have a 2530p with the 2.5" OEM 160GB spinner in the optical bay and 1.8" bay vacant. Although this would be completely ridiculous, I'm considering getting two 160 gb intel ssds. I am wondering the 2530p has support for raid 0 and if so, how to properly configure it? This combination would clearly result in the melting of faces and possibly my computer.
Also, has anyone seen X-18m G2's 80 or 160? Cant find them anywhere...
[url]
View 6 Replies
View Related
Jul 15, 2009
I have a new 2530p here. When I start it up it shows a screen where I can choose what language I want to install of Windows Vista.
If I choose a language, can I later recover the laptop to it's original state, so I can choose the language again?
View 7 Replies
View Related
May 14, 2014
I should like to connect my old hp2710p to TV via HDMI. So I connect the displayport of the docking with an hdmi adpater but it doesn't work.
Â
If I connect my hp2760p, everything goes.
Â
The 2710p has w7 32bit, last version o BIOS and drivers.
View 2 Replies
View Related
May 4, 2009
I have an XPS M1530 running Vista Home Premium 64-bit, T-9300 Processor, 6 gig RAM, 320 gig 7200-rpm harddrive. I am using it with the Kensington SD100S Laptop Docking Station (with stand) and a 22" Samsung monitor (monitor as primary display and laptop display as secondary display) and the Dell Bluetooth keyboard and mouse. The Kensignton docking station attaches to the M1530 via USB.
My question is, is it safe for me to detach the docking station when the M1530 is booted up and running? What about detaching the monitor? Except when I have an external USB harddrive turned on, there is not anything in my tray icons to indicate (as far as I can tell) that any hardware needs to be safely removed.
I have a 2nd AC adapter in my den separate from my home office, but I so rarely take the laptop mobile in the house since I power down first. Please let me know whether I am being too cautious, and if it is safe to detach the docking station and monitor while running any precautions that I should take. I do have my XPS backed up via Ghost if a problem should happen.
View 4 Replies
View Related
Jan 14, 2010
TITLE: HPQFlash for HP Notebook System BIOS (68PSU) - Microsoft Windows-Based
VERSION: F.10
PURPOSE: Routine
SoftPaq NUMBER: sp46785
SUPERSEDES: sp45539
EFFECTIVE DATE: December 08, 2009
CATEGORY: BIOS
SSM SUPPORTED: NO
PRODUCT TYPE(S): Notebooks
HARDWARE PRODUCT MODEL(S): HP EliteBook 2530p Notebook PC
OPERATING SYSTEM(S): FreeDOS
Microsoft Windows 7
Microsoft Windows Vista
Microsoft Windows XP
LANGUAGE(S): Global
FIXES: - Fixes an issue where the computer is unable to boot from some attached USB
devices.............
View 10 Replies
View Related
Mar 26, 2008
just installed fx2500 into my 9400.. everything working great..
What should I expext the temps to be running at ... Seems hot... I could keep my 7900gs under 60c by keeping my 18kgui program runnin fans on high while playing Cod4 or CS:s... now the gpu peaks out at 70-72c...
View 14 Replies
View Related
Mar 14, 2008
I have a 9400 and i just bought an fx2500 ... bought the PA-13 130w power adapter... I have modified the pieces that need to be snapped off in the casing... all ready to put in the card...... when i fire it up WHAT DO I DO? And how will i load the Drivers... AND,... AND what drivers
View 12 Replies
View Related
Oct 1, 2007
Just recently upgraded my E1705 with a FX-2500
Flashed the unlocked BIOS with the 1.24 v GPU 500 -1200 clocks
3DMark06 came back @ 5180
Just wondering how this matches up with others here with a simular setup.
View 15 Replies
View Related
May 24, 2009
I wish to upgrade my laptop dell inspiron 2500 cpu processor which at the moment my laptop runs on a just under 1 ghz processor [pentium three] chip.does anyone know my limits on what i can upgrade to as in a faster modern processor chipset compatible with my motherboard and without major soldering or mother board changes.
View 4 Replies
View Related
Jan 13, 2008
i have an m90 t520 with 4gb ram and fx2500m,runing vista ultimate with dx10.
i try to run crysis and i cant get it to run with very high and on high it barely runs, i updated my gpu nvidia driver to 7.15.10.9808 , and still cant run it good , i tried to get a modified inf but my laptop kept on giving me the blue screen and crashes everytime i try to run crysis or even 3dmark06
if anyone can provide a working inf or a good driver with the latest inf modified installed that would be great.
and maybe an answear on why i can run the damn game on very high with dx10 even though my laptop is more then qualified to run it
dell m90 , t5200 core 2 duo,4gb ddr2 5400,nvidia quadrofx2500,wxga+ 1440.900.
View 12 Replies
View Related
Feb 19, 2009
HP is going to make a docking station for the HP mini 1000. I guess that port on the mini is an expansion port and not displayport. Looks cool. Guess it makes up for all the missing ports on the mini.
View 5 Replies
View Related
May 18, 2009
an issue I have, regarding video playback. Whenever I watch a video file on my HP DV6T, the playback seems rather grainy.
The video playback seemed much more clearer of a picture on my dv5z, and I am wondering if it has to do with the resolution.
Could this be because of the 16" 1366x768 resolution?
All I want is to be able to watch my movies or video files FULL SCREEN, and in good video quality.
View 5 Replies
View Related
Apr 25, 2009
I did install HP newly released updating sp42660, but all docked usb ports are stll not in function. It might be caused by the previous MS Update HX2LP Kit, but i could not find the removing way for it now.
details for laptop: HP 8510w, advanced docking station, Vista Business x64
View 7 Replies
View Related
Feb 5, 2009
Like many others, the power jack in my HP zv5000 appears to be broken or faulty. When i had this problem on my Compact Presario, i bought a port replicator that had an excellect power jack. i had hoped the Targus universal docking station would do the same but am told it will not power the laptop. Anyone know of a docking station or port replicator for this model that will power the laptop? i am seriously not into paying over $100 to get it fixed only to have it happen again...as so many others have done.
i saw the quickdock on Hp site and asked them if it was compatible with the zv5000 series, but they still have not responded.
View 4 Replies
View Related
