I'm trying to install 7 on my 2530p. I checked on HP we site but no official drive for this OS. So I called the support and asked for more details. They said that there's no driver for the moment. Soon they will relase them. Now they suggested to use the vista buisness 64bit driver using the compatibility task. My question is about which driver should be installed and what is unnecessary.
View 7 RepliesI'm really impressed with this computer (HP EB 2530p) but read in the review that the fan tends to get loud and that it get's fairly hot.
Exactly how loud does the fan get? I'm a student and I dont want to sit in a room with 200 other students looking at me and my loud laptop hehe. Is it really noticable/annoying when under medium load (word/excel + youtube perhaps)?
Also regarding these temperatures, does it get uncomfortably hot should you sit with it in your lap for an hour or 2?
I'm not sure if I beef up all the "cons" because I'm so picky, but if I am, please tell me to wake up :-)
I just got my 2530p. The problem with my 2530p is the fan noise. It is on constantly. I would think that the speed of the cpu fan should go up and down?
View 10 Replies View RelatedI am using HP 2530P at home and connect to wireless access point for accessing the internet services. Recently, I found my wireless connection icon in the system tray are shown incorrecly. actually the wireless controller card is conencting to the wireless router and no problem to connect to the external network (Internet), but the connection icon in system tray indicate the connection is disconnected like below. I am no sure it is a window vista problem or my HP notebook problem.
View 9 Replies View Relatedmy 2530p
I finally fired up my computer, and instead of Vista it installed XP. In the box is a Operating System CD for WinXP Professonal as well and a Application and driver recovery DVD for WinXP. That should be the right CDs and only the OS on the computer is wrong. There's a Vista sticker on it, mind.
And no spamware? I got a trialversion of Office 2007 that I need to kick off again and the installation created a tiny 1GB partition which only holds some HP tools. Convenient. And the IE contains a spambar with google search, lots of AOL and some HP stuff.
Now I feel slightly annoyed that they added a UK plug to the parcel and not a European one eventhough I will need it anyway soon and for a longer time. Or maybe that is standard when asking for a UK keyboard and English windows?
I am going to upgrade my dear HP elitebook 2530P with an additional harddrive insted of my optical drive, So I where browsing the Maintenance and Service Guide [url] .
On page 68 - It says :
-----
Secondary hard drive cage assembly, includes additional USB port (required for installation
of secondary hard drive
492574-001
-----
Secondary hard drive connector board (required for installation of secondary hard drive) 495027-001
-----
Secondary hard drive system connector board (required for installation of secondary hard
drive)
495028-001
-----
I am going to install a normal 2,5" disk, so which of them do I need ?
after lots of considering and looking for alternatives I finally ordered a 2530p today. After all, I think this is the best notebook for me.
I never bought a computer where a full windows version is not available on CD and thus never had bad experience with lots of stuff preinstalled.
How bad are the 'extras' on HP business computers in Europe? And do you have any advice on how to clear the computer up and what to delete?
looking at the order sheet I'm a bit confused regarding the OS
OS: Vista Business wXPP OFC Ready 2530p O/S
Restore Media: DRDVD Win XP 2530p Recover Media
Restore Media: OSCD Windows XP Pro Media
My guess is that someone forgot to update the order website
I just bought a 2530p, with 1.8-inch 120GB hardisk. The partition is assigned as below.
- 101GB for C:
- 9GB for D: (HP_Recovery )
- 1GB for F: (HP_Tools)
I would like to replace existing 120GB HD with larger one, and would like to ask some question.
1. what is the largest size of 1.8-inch hardisk for 2530p? I refer to "Service and maintenance information" manual, the hardisk size seems only up to 160GB, could I installed 260GB or even larger hardisk?
2. Is it neceessary to keep the partition of HP_Tools or HP_recovery?
(if I delete the partition 'HP_Tools' or 'HP_recvoery', can the OS be booted up?)
I finally received my 2530p today, and it's a thing of beauty
The only slightly annoying bit is that HP delivered a British wall contact instead of a general European one, probably because I ordered a British keyboard. But I might still have a suitable cable somewhere, or use an adapter instead.
Anyway, Vista is preinstalled on this computer and I could also opt for XP instead. The manual doesn't say how to do that. Can smoeone explain to me how to install XP? Someone mentioned earlier that I should make a backup disk for Vista anyway. So what's the general workflow? Get the computer up and running as is, make backup disk, somehow install XP over it?
Today I got my HP EliteBook 2530p in "FU432EA" configuration. It was important for me to have an optical drive, so i chose the configuration with the 120 GB 1,8" HDD.
The 2530p looks great so far and performs pretty well... If there weren't the extremely annoying noises coming from the notebook.
The HDD with its 5400 rpm (it's a Samsung HS122JF, very slow btw, not really faster than 4200 rpm drives) makes a clearly audible, very high frequency noise and turns on/off every 30-60 seconds resulting in clicking sounds. I can live with that for the moment, because I'll upgrade to some SSD in the near future.
But the second annoyance is the fan inside the laptop. Even when idling in windows with temps below 50 °C the fan turns on every few moments. Unfortunately I haven't been able to control the system fan or even read the actual speed. I tried Notebook Hardware Control, SpeedFan and HWMon, but neither of them reported me anything about the fan. I tried undervolting the CPU with RMClock (which doesn't really support the new Penryn CPUs) and got a few degrees less, but this wasn't enough to keep the fan quiet. In the BIOS there are no options regarding the fan, only some "keep fan always running on AC power", which I disabled.
My problem is that my 2530p won't come back from sleep mode; the screen stays black.
As seen in this thread, [url] this is a known problem.
It seems that switching from IDE to AHCI will do the trick, but I have no idea how to do that without causing an other problem. I use vista.
I just bought a refurbished Elitebook 2530p that didn't come with a wireless card, so I bought a "Broadcom 4322AGN 802.11a/b/g/n Wireless LAN adapter (Sangria) - For use in Most of World (MOW)". This WLAN card was listed on HP's parts page for the 2530p here.
However, when I installed it and connected the antennas, the computer doesn't recognize it at all when booting up. It doesn't even acknowledge the presence of a new device.
I am comparing this against the connector in the 2510P to see if there could be a possibility of retrofitting the 2730P connector to obtain a SATA output. The 4200RPM ZIF drive in the 2510P is ultraslow and ZIF (PATA) alternatives in SSD or 5400rpm HDD form are poor value for money. micro SATA is the way to go..
Found the HP Media Library has systemboard pictures. The 1.8" drive connectors for 2510P, 2730P and 2530P are here:
Though it is somewhat difficult to make out the 2730P 24-pin socket. Can anyone take a photo of it and link on here? Here's the one for the 2510p
.
More pics at [url]
We can see that the 2510P ZIF socket is very different to the 2730P systemboard connector. BUT! There is the unused 24-pin socket on the 2510P that looks remarkably similar to the 2730P 24-pin SATA connector. Could this be used to provide SATA on the 2510P?...........
I have a 2530p with the 2.5" OEM 160GB spinner in the optical bay and 1.8" bay vacant. Although this would be completely ridiculous, I'm considering getting two 160 gb intel ssds. I am wondering the 2530p has support for raid 0 and if so, how to properly configure it? This combination would clearly result in the melting of faces and possibly my computer.
Also, has anyone seen X-18m G2's 80 or 160? Cant find them anywhere...
[url]
I recently noticed that my 2530p (great laptop btw) runs about 10 degrees hotter (53-55C versus 40-45 C just idling) when it's in the dock as opposed to when it's just on my desk. Normally this isn't really a problem but when doing anything remotely taxing on the processor the CPU temp shoots up to 60-70C when it's in the dock.
So I searched around and there seems to be no mention of this anywhere on the Internet. I figured it might be an airflow issue. So, pulling the base off the dock it appears that the supposed vent through the right side of the dock (where most of the airflow is supposed to run) is blocked almost entirely by the sliding latch mechanism.
Is this just terrible design or is something broken? I considered drilling holes through the latching but it looks like there's flat cables running all over it.
Does anyone else have a 2530p with the 2400/2500 dock, and if so, do you have heatflow problems? Have you found anyway to fix them? I tried raising the dock up off my desk but that doesn't seem to help too much.
Bonus question: The S-video port on my dock doesn't work at all. Is this because the 2530p doesn't output s-video, or is my dock just broken?
I have a new 2530p here. When I start it up it shows a screen where I can choose what language I want to install of Windows Vista.
If I choose a language, can I later recover the laptop to it's original state, so I can choose the language again?
After doing a fresh install of windows 7 Professional 32Bit, my wifi drivers did not install, i have tried numerous drivers of the website for my laptop and they don't work, ive tried many things but cant seem to find the right drivers, my laptop is a HP Elitebook 2530p, can find the correct drivers for my wifi Card?Â
View 5 Replies View RelatedTITLE: HPQFlash for HP Notebook System BIOS (68PSU) - Microsoft Windows-Based
VERSION: F.10
PURPOSE: Routine
SoftPaq NUMBER: sp46785
SUPERSEDES: sp45539
EFFECTIVE DATE: December 08, 2009
CATEGORY: BIOS
SSM SUPPORTED: NO
PRODUCT TYPE(S): Notebooks
HARDWARE PRODUCT MODEL(S): HP EliteBook 2530p Notebook PC
OPERATING SYSTEM(S): FreeDOS
Microsoft Windows 7
Microsoft Windows Vista
Microsoft Windows XP
LANGUAGE(S): Global
FIXES: - Fixes an issue where the computer is unable to boot from some attached USB
devices.............
I love my VGN-Z90NS (weight, form factor, power, RAIDed drives), but the lack of virtualization support (that is, Sony's disabling of the VT-x feature in BIOS/EFI so you can't run 64-bit guests) is starting to cut into what I need to do for my day job.
I've been looking arund for something relatively equivalent and looked at a bunch of options which were close in terms of the spec of the Z as well as size and weight (under 4lbs). For those who care, those are:
Hewlett Packard 2530p
Lenovo Thinkpad X200
Lenovo Thinkpad X200s
Lenovo Thinkpad X301
Toshiba Portege R600
I love the size/weight of the R600, but I've had my share of underpowered notebooks (even though max memory is 5GB, not just 4GB) and it's not as easy to change out the hard drive (technically voids the warranty). I've configured various Lenovos, but I really want the optical drive internal which means the X200 series is out, and I didn't like the overall look of the X301, plus for that, I'd rather get the R600 which is smaller and lighter and better looking. Not all of the Lenovo laptops offer a 9-cell (if I need it; I have one for the Z), and the Toshiba does not. A latecomer to the game was the 2530p, which is under 4lbs, can go up to 8GB of memory (and being PC2-6400, it's cheaper).
I have several of these machines (Windows XP SP3) all doing the same thing, will hang at the Windows XP screen. When the user is finally able to log in, maybe after 5 or 6 attempts they will have no network connection.
I have the latest BIOS and network card drivers loaded.
I have several of these machines (Windows XP SP3) all doing the same thing, will hang at the Windows XP screen. When the user is finally able to log in, maybe after 5 or 6 attempts they will have no network connection.
I have the latest BIOS and network card drivers loaded.
with a new computer, hp dv6 on windows 7, i need to transfer windows xp files over.
so it's sort of like drag and drop, except wirelessly.
the windows xp is a desktop with a router configured and the laptop configured to use the router for wireless access...
ive been trying to understand how all this works, but i cannot simply manage to access windows xp, or using windows xp to access windows 7!
i have a cat5 cable if that is needed... but i dont know what to do with it..
Even if it's not wireless and with the CAT5 cable, i am willing as long as it gets transferred, i just prefer wireless
and i think i rea that Homegroup is not compatible with Windows XP so what do I use?
it's also confusing that in my Network Map on windows 7, it does not pick up the shared documents folder on my desktop.
Yesterday I bought a Compaq CQ58 with Windows 8 on it. I would like to buy Windows 7 to replace Windows 8 with. But:
Â
1. Is it posible to change 8 to 7 on my CQ58 notebook?
2. And if so, can I still have the default HP programs on it?Â
3. And if so, how?
I installed windows 7 on my lappy HP DV2-1020ER, all drivers installed very good but video card (ATI Radeon X1250) didn't install. This is only 16MB for graphic.
Who install windows 7 on this lappy,
i have bought my little brother studying 4th ,a laptop hp compaq v3000z, i doubt wether it runs win7,i havnt even tested win vista on it....
the specs are
# AMD Turion 64 X2 Mobile TL-52 (1.60GHz/512KB)
# 14.1" WXGA BrightView Widescreen (1280 x 800)
# NVIDIA GeForce Go 6150
# 512MB DDR2 SDRAM (2x256MB)*
# 80 GB 5400 RPM Serial ATA Hard Drive
# Super Multi 8X DVD+/-R/RW w/Double Layer Support
# 802.11b/g WLAN
# 6 Cell Lithium Ion Battery
# Dimensions: 13.15" (L) x 9.33" (W) x 1" (min H)/1.54" (max H)
# Weight (6 cell): 5.5lb
I have an HP Pavilion dv2000, came with windows vista x64 bit, i just reformated and put windows 7 x64 bit, it didn't install any video drivers, can someone please tell me where i can get a video driver for x64 bit or if they even make one?
View 7 Replies View RelatedMy dad owns an HP G60. He hates Vista so we tried to get xp on it with absolutely no luck. It wouldn't install or work on the machine whatsoever. When my dad heard about windows 7, he got high hopes for his laptop once again. He wants to get windows 7 on it but with our recent failure, I thought I would ask people what they thought first. So NBR experts, will windows 7 install on an HP G60?
View 6 Replies View Relatedif i download an installation iso of win7 when it becomes available, will it install using the product key of the laptop?
i'm planning to buy dv6, and i don't know if hp(or microsoft. i don't know.) ships win7 upgrade cd here in the philippines.
i am really thinking of buying windows 7 and installing it on my hp DV5 laptop , i just want to know if there is any compatability issues with my DV5 laptop, will those work
-touch buttons
-wifi and wireless
-programs like , adobe suit, office, call of duty, object dock, cisco semulators
I have windows XP installed on my dv6894ca notebook computer, all went fine and I followed the guide posted here and used some of the drivers, the rest I obtained from the HP Support site for my notebook. My problem is that my laptop seems to be running very hot compared to what It did with Vista. The fans are on a lot more, and the notebook is hotter to touch than it was running Vista. It's almost like the CPU isn't slowing itself down enough, or the GPU isnt. Im not sure why it is doing this, any pointers or tips would be nice. It just seems like with XP everything gets hot, faster, and doesn't cool down that well.
View 4 Replies View Related