I did install HP newly released updating sp42660, but all docked usb ports are stll not in function. It might be caused by the previous MS Update HX2LP Kit, but i could not find the removing way for it now.
details for laptop: HP 8510w, advanced docking station, Vista Business x64
I have a Dell Latitude E6430 laptop running windows 7 64-bit. When I try to use it with a docking station, the USB ports on the docking station do not work. When I try to use a USB mouse with it, it only works with one of the USB ports. When I try using my printer (HP laserjet 1320) through the USB ports, it doesn't work (it did previously with a Dell latitude E6430 running windows 7 64-bit).
I've installed the latest BIOS upgrade, updated the USB and intel chipset drivers. How do I get these working?
I have an Acer 5720G. I have lost power on the 4 USB ports.
All work okay if I use a powered hub so it looks like its just a power issue. How can I get them working properly again?
I just got my new M6800 laptop- put it in the docking station and everything seems to work except for the USB's on the docking station.
I have had to plug my peripherals into my laptop. This is by design for the docking station. Why do I have a docking station? So that I can have an external keyboard and other peripherals permanently connected when I am in my office.
Went in device manager and searched for USB driver updates and mine are apparently up to date.
No trying a dell support chat window- let's see how long this takes....
The USB ports on my new E Port II docking are not working with my new Latitude E7240 Laptop. Full configuration of the laptop is below. Talked with Dell and they sent me a replacement docking station but the same issue surfaced. Looked at the Device Manager and no extra USB ports show up when connected to the docking station. The side laptop USB works fine when the docking station is connected.
Computer Model Latitude E7240
Shipping Date 11/16/2013
[Code] .....
I have a T540p laptop with Windows 7 installed on it, and when I insert it in the docking Station (Ultra Dock 90w) the USB ports don't work.
I tried with another laptop setup with Windows 8.1 and everything works fine. I also tried with another docking stsation, I have the same issue. I suspect something wrong with Windows 7.
All drivers are properly installed as the computer is new. I also performed the docking Firmware update from this page [URL] ... but this didn't work.
I have a TravelMate TMP645-MG connected to ProDock II. The problem is that the USB ports on docking staion are not working, I can see the following yellow exclamation mark in device manager when the docking station is connected (no errors when not docked).
Windows 8.1 Enterprise, 64bit. All latest drivers from Acer homepage are installed.
I have a wireless mouse and printer plugged into the USB ports of my docking station and generally have no issues with them functioning. However, when I take my laptop off the docking station and then return it to the docking station, the laptop no longer recognizes the keyboard and also says that the printer is not connected. Once I restart they both work. I have also tried to unplug the wireless receiver for my keyboard from the docking station and plug into the laptop, but it still does not work without reboot.
View 7 Replies View RelatedI need to reinstall my OS (Vista Business) but I can't find the DVD that was included with my notebook.
My cd-key is not working or retail versions of Vista that's why I need the OEM disc.
Is there anyway I can order it again from dell?
HP Pavilion Dv5020ca windows vista home premium
After upgrading from xp to vista the drivers for my sound card will not install and the error message I received was
cannot find media...
recently I noticed that I no longer have a battery % left gauge in the lower right tray on my Vista install. I used to
View 4 Replies View RelatedI have a Dell d820, docking station, and monitor stand. I am running Vista ultimate.
My problems are two-fold:Hot docking does not work. If I take my laptop out while it's running and open the screen, it is blank, and it never comes back. Pulling it out while asleep results in similar issues. The only reliable way to dock and undock is to shut down completely
I'm running a D820 and I just installed Vista 64 Ultimate. I ran the entire install while disconnected from the dock and everything went smooth (SP1 and all patches afterwards).
After connecting the laptop to the dock I'm getting a very annoying latency with my mouse and keyboard. The mouse stops responding for as little as half a second, up to 4 or 5 seconds depending on what
I'm doing. While typing, the keyboard will also repeat the last key I touched when the issue occurs
I have an XPS M1530 running Vista Home Premium 64-bit, T-9300 Processor, 6 gig RAM, 320 gig 7200-rpm harddrive. I am using it with the Kensington SD100S Laptop Docking Station (with stand) and a 22" Samsung monitor (monitor as primary display and laptop display as secondary display) and the Dell Bluetooth keyboard and mouse. The Kensignton docking station attaches to the M1530 via USB.
My question is, is it safe for me to detach the docking station when the M1530 is booted up and running? What about detaching the monitor? Except when I have an external USB harddrive turned on, there is not anything in my tray icons to indicate (as far as I can tell) that any hardware needs to be safely removed.
I have a 2nd AC adapter in my den separate from my home office, but I so rarely take the laptop mobile in the house since I power down first. Please let me know whether I am being too cautious, and if it is safe to detach the docking station and monitor while running any precautions that I should take. I do have my XPS backed up via Ghost if a problem should happen.
Alright, so to start off I'll just say that I love the DV2. I bought the dual core version loaded when it first went up for customization at the HP site. I have, however, noticed that it can run a tad hot.
When I first got it, without a cooler, the CPUs usually went from between 41c-45c from light usage, and the GPU from between 51c-55c. Even when propping the back up I only saw a drop of 1c total. I bought a small cooler for it and saw a fairly good drop. The temps of the CPU where down to 36c-39c and the gpu was down to 45c-49c with both sometimes even going lower depending on how much the AC in the house was on.
I did try some gaming on this, playing some HL2. The CPU got to 60c at the highest and the GPU also only got to about 60c while on the cooling pad.
So, a few days ago I updated my BIOS to the latest on for the DV2 from the HP site. I noticed right away that my temps where higher. The temps while on my cooler where the same as they used to be without it, and with the cooler off the GPU was getting up to 60c while at idle. I tried a few things, like setting the GPU to low power mode with the Catalyst controls, but that didn't help.
Not sure what to do I noticed this morning that I hadn't gotten SP2 for Vista yet. So I decided to get it in hopes that it would help.. now my DV2 is even hotter. On the cooling pad my CPU was at around 60c and GPU was at 65c while at idle. I've had it on all day, with all the vents in my room open and the AC up high and the lowest it's gotten is to 50c for the CPU and 55 for the GPU.
So I bought a sealed box 8530w off eBay. Now I know from previous HP business models that the warranty start date on the online lookup tool starts from the day the laptop was manufactured. This hasn't ever been an issue in the past, since I got previous laptops second hand anyway.
But this one is already nearly 6 months into its 3 year warranty. I guess it has been sitting around sealed in its box for a while.
So...
1. Is there any way I can get HP to update the warranty start date? (I'm getting an invoice from the seller as we speak)
2. Assuming I can, will that new warranty start date be reflected in the online lookup?
3. Will the new warranty start date be transferable if I sell the laptop, or will it only apply to me, with my name on the invoice?
I recently bought the upgrade but this is the first time I am upgrading Windows as I usually do clean installs. Is there anything I should pay attention to? Are the drivers already there for Win7 and are there any known issues?
View 10 Replies View RelatedHP is going to make a docking station for the HP mini 1000. I guess that port on the mini is an expansion port and not displayport. Looks cool. Guess it makes up for all the missing ports on the mini.
View 5 Replies View RelatedI bought an HP-DV6 1045EE, but I didn't like the partition scheme..
This was the way it first was:
C:Local Disk [288gb]
D:Recovery [10gb]
C was preloaded with Windows Vista. I shrunk the partition using Vista's Disk Management as much as I could, and shrunk it further to 50gb using Gparted. After doing this, I couldn't boot into Vista anymore. So I restored the image using the recovery manager.
I then created another 50gig partition for Win7, and installed it. All well and good.
Then I created an extended partition out of the remaining space, since all other partitions were primary, and created two logical partitions, 1 unformatted and the other NTFS.
After this, I booted into Vista and saw that my recovery partition had turned to unallocated space, even though I'd made sure not to touch that partition no matter what...
I have a DV5T and just the other day the USB devices stopped working, my printer, my mouse, etc.
They provide power, because when I plug my laptop cooler in via USB it kicks on, does anyone know how or why it won't recognize the USB devices?
Like many others, the power jack in my HP zv5000 appears to be broken or faulty. When i had this problem on my Compact Presario, i bought a port replicator that had an excellect power jack. i had hoped the Targus universal docking station would do the same but am told it will not power the laptop. Anyone know of a docking station or port replicator for this model that will power the laptop? i am seriously not into paying over $100 to get it fixed only to have it happen again...as so many others have done.
i saw the quickdock on Hp site and asked them if it was compatible with the zv5000 series, but they still have not responded.
I have an HP Compaq 8510p, T7300, running Windows XP Pro. In the last day or so I noticed that pressing the fn+Fx key combos to dim or brighten the screen are no longer working. Nor is the battery status key combo. Volume and mute seem fine. Wireless is fine. The "Info" and "Presentation" keys as well as the sleep combo all appear to be working as usual. But the 3 mentioned above have stopped working. Has anyone had this issue or have any idea what the problem might be?
View 5 Replies View RelatedIn the 2008 HP Advanced Docking Station, there is an Upgrade Bay slot where you can insert a hard drive into it. I'd like to know if the SATA connection actually works as expected instead of converting to a USB interface.
View 3 Replies View RelatedI recently noticed that my 2530p (great laptop btw) runs about 10 degrees hotter (53-55C versus 40-45 C just idling) when it's in the dock as opposed to when it's just on my desk. Normally this isn't really a problem but when doing anything remotely taxing on the processor the CPU temp shoots up to 60-70C when it's in the dock.
So I searched around and there seems to be no mention of this anywhere on the Internet. I figured it might be an airflow issue. So, pulling the base off the dock it appears that the supposed vent through the right side of the dock (where most of the airflow is supposed to run) is blocked almost entirely by the sliding latch mechanism.
Is this just terrible design or is something broken? I considered drilling holes through the latching but it looks like there's flat cables running all over it.
Does anyone else have a 2530p with the 2400/2500 dock, and if so, do you have heatflow problems? Have you found anyway to fix them? I tried raising the dock up off my desk but that doesn't seem to help too much.
Bonus question: The S-video port on my dock doesn't work at all. Is this because the 2530p doesn't output s-video, or is my dock just broken?
I have an COMPAQ PRESARIO CQ61 and suddenly is asking me for the admin bios passwordAfter 3 failure trials, it shows a code "76317137".
View 5 Replies View RelatedIt was placed vertically in a bag and my grandma spilled water from a flower vase on my laptop. Good thing it wasn't turned on but The ports were wet and I wiped them with tissue.
I placed the laptop upside down in front of a fan to hopefully let all the water inside evaporate. I also dismantled the battery.
Quote:
fter examining the configuration files included in the latest build of OS X, a new report has discovered references to two new MacBook Pro models.
The 10C531 build of the 10.6.2 update contained the configuration files in question, according to Spanish-language site Applesana.es. The models referenced are the MacBook Pro 6.1 and the MacBook Pro 6.1b. The current crop of MacBook Pros have a 5.(x) designation, spanning 5.1 through 5.5.
The MacBook Pro line was not updated during the latest Apple refresh, when Apple introduced Intel's Core i5 and i7 processors to the newly redesigned iMac line.
The Intel Core i7 mobile processors, formerly code named Clarksfield, reportedly offer better performance with multi-threaded applications and can increase the processor clock speed up to 75 percent to match workloads..............
I'm a bit embarassed to bring this post to the forum as looking down the list nobody's posting about these lappies these days!
Basically, my hard drive's full of stuff I don't want to delete (or move to external), my dvd writer needs a paperweight to keep it closed up and the keyboard is like it has glue under the keys!
So, I can't afford to replace it at the moment and I still love the screen and the occasional Doom3 etc (sad I know). I've done some research here - but would appreciate some guidance on which bits to buy.
The drive - I know it's got to be PATA(?) but which drive should I aim for if any? Also, will all the PATA 2.5" drives fit, do I take the bits off the existing one to put on the new? Is there a limitation on the amount of hard drive memory the system will recognise?
After I updated the BIOS on M1210 the laptop doesn't start again. The power light start for seconds then goes off, I cannot hear the hard disk movement or any hardware except the power light....
View 10 Replies View RelatedHow can I update to the latest version on ATI's site properly?
View 10 Replies View Related