I am getting error code 80070490 every time I try to do Windows updates. I have done the system restore as far back as I could and this did not solve the problem. I am going to be putting a new hard drive in the computer, but would like this problem to be resolved first.
View 4 RepliesI have a new Compaq CQ58-353EM laptop. It came with preinstalled system (Windows 8). Afterwards I installed Windows and HP updates.
The problem I have is with the Realtek PCIe FE Family Controller (ethernet). In the device manager it is shown with a yellow triangle with an exclamation mark. In the device state it is stated: Your computer's system firmware does not include enough information to properly configure and use this device. To use this device, contact your computer manufacturer to obtain a firmware or BIOS update. (Code 35).
Laptop has all system and hp updates installed.
I tried the following to resolve the problem:
- 2 different bios versions (F.26 and F.25).
- several add/remove/reinstall of the Realtek drivers
- 2 different versions of Realtek drivers: 8.3.730.2012 and 8.20.815.2013 (from Realtek site).
Ethernet is working OK under Ubuntu.
Ok, i found the solution for my Acer P3-171. I uninstalled Аcer cradle driver (by starting the installer downloaded from official site). Then i installed video driver for Windows 8.1 and everything now works fine.
View 4 Replies View RelatedSo, Lenovo thinks my hard drive was failing on my G500. They send me a hard drive and 4 Lenovo recovery discs. I install everything properly and I get a Windows activation error.
I call Lenovo and they verify the O/S and the hard drive are properly installed. However, they tell me they cannot give me a license key and I must ship my laptop back to Lenovo so they can install a license key. Does this make sense?
The windows activation error code is 0xC004C003.
Now, what was interesting is when the rep took remote control of my machine, I saw it was registered under my son's email address and not mine (I entered mine when I did the login after the reinstall) and how/why it shows my son's address.
When i have done my diagnostic test in my windows 7 inspiron laptop it shows error code0142
What i need to do now to get my lap in a working conditions
When I am loading windows on my dell inspiron 6000 laptop it stops and I get a error code 0x80070001 what does that mean ....
View 4 Replies View RelatedTried to do a restore to factory image... Got error code 0x241... Computer is hung up at Windows Boot Manager, going around in circles... Can't accomplish tasks on windows boot manager and can't get out of window...
Acer Aspire One
Windows 7 OS
Have recovery data on a flash drive
My Compaq Mini CQ10-150CA just started asking me to enter Current Password. I get three attempts then it displays
"Password check failed. Fatal Error... System Halted. CNU0095JS7"
What does this mean? What caused it to just start happening all the sudden?
[url]
This is what I have, and I imagine HP probably use the same drivers for most of its late model laptops on windows 7 for the touch activated media button i.e. the back lit strip above the keyboard just below the LED screen that let you activate WIFI, sound. playback..etc..
I have read from several posts that windows 7 install fine on HP laptop just that the touch strip driver does not work with the factory drivers.
Windows (Vista) Updates shows this update for my Compaq Presario F572US notebook PC: "nVidia - Display - NVIDIA GeForce Go 6100". The size of the download is 64.3MB.
I visited nVidia's website to see whether they had an update; they had none. So, I'm wondering whether I should get this update suggested by Windows Update or ignore it.
When updates are posted on Aspire Support Page my Aspire Switch 10 will not complete most downloads I attempt. It downloads anywhere from 60% to 95% of a particular download, then goes no further even though it indicates it is still downloading. I have left it in this "downloading" state for 10 minutes with no further progress. Of the few smaller zip files it did download completely, I got an error message of "Unspecified Error # 0x80004005" when it tried to unzip some of those.
View 1 Replies View RelatedI recently got a CD-ROM that was for the PCGA-DSM51 and other docking stations. The reason why I got this since my original CD-ROM isn't working right anymore. But the problem I' am having is that it says that my CD-ROM is "epson dl-v100 ieee 1394 sbp2 device"
I don't think Windows XP detected the CD-ROM right since it gives a code 10 error and can't start. I basicaly need help so I can make my CD-ROM work
right.
My notebook is the Sony PCG-R505ESP.
I got Vaio FZ190 with faulty Nvidia chip, then i had my motherboard replaced. The problem is i cannot restore my C: drive using DVD i made. So, i tried hidden partition by press F10 and is also not working. Here is the code i got while i was trying to do so,
"Cannot use this recovery disc for this computer. Confirm the model number"
when I click Ok, this message appears
"error: CompareSnyIniToPacIni, Error: 92"
Then I click OK and it drops me back to the Vaio recovery centre and this cycle will happen again when I repeat to restore drive c.
Both DVD and hidden partition was working just fine before i had my motherboard replaced. I search all thread and find out that system recovery will check my BIOS before it can restroe my C: drive so i try to reset BIOS setting by pressing F9 in BIOS setting and it's still not working. Now, i can use my vaio just fine but i can't restore my C: drive.
This is what it said in my BIOS:
BIOS Version: R0050J7
Machine Name: VGN-FZ190
Serial Number: 9623323-3000004
UUID: 96a11200-f896-11de-8128-0024beb312c0
Basically the hard drive (of my XPS m1530) has been going a bit slower than usual recently.
I figured it was just Vista been more sluggish than usual.
So I decided I'd back it up, wipe it and install my new copy of Windows 7 RTM.
After booting from the DVD, setup stopped halfway through giving me this '0x00000e9' error code.
I subsequently ran the dell diagnostics.
Which gave me this :
Hard Drive - DST
Test Results : Fail
Error code 2000-0142
Msg : hard drive 1 - Self test unsuccessful.
Status : 70
OS: Windows XP SP3
I had two 512MB 2Rx16 PC2-5300S-55-12 sticks of ram in my laptop.
I purchased 2 x 2GB 200PIN DDR2 SODIMM 256MX64 sticks to install.
When i put in the new sticks I get 2 short beeps and it doesn't finish booting the the OS.
Am I doing something wrong? I know that the OS will only recognize 3Gb but it should at least boot right?
Also after the post check this pops up:
The amount of system memory has changed.
If you did not change your memory...
To resolve this issue, try to reseat the memory
Alright so i have been trying to upgrade from home premium 64bit vista to W7 with my upgrade disc and i am out of idea. Every time i try to run the upgrade i get an error saying
"Windows cannot copy files required for installation. The files may be corrupt or missing. Make sure all files required for installation are available and restart the installation. Error code: 0x80070017"
I am trying to copy some dmg files from my mbp to an external hard drive (a western digital 1tb essential, and a 250gb wd passport). I get this "error code 0" when I try to copy the files larger than 4gb. Now I heard that this is because it is a fat32 drive or something like that. Is there a way to fix this without buying a different hard drive?
View 6 Replies View RelatedI am having a major issue with my Dell XPS L702x laptop at the moment, in that it cannot boot up at all, rendering it completely unusable.
When this first happened, the laptop used to progress through the dell screen, the 'starting windows' screen, and then just hang at a blank screen, or with a blank screen with the windows 7 background and a mouse cursor. This happened in both normal startup and attempting safe mode.
I have tried starting in best last known configuration, resetting the bios to default settings. I eventually got startup repair to work, but it didn't do anything, nor did system restore.
I run diagnostics, and receive this error right at the beginning of the test:
ERROR CODE 0146.
Msg: Error Code 2000-0146
Msg: Hard Drive 0 - self test log contains previous error(s).
I continue the diagnostics and everything else passes okay.
However, now when I try to boot my PC up in normal or in safe mode, I get past the dell and windows startup screen and instead of the hang I simply get a blue screen error:
BAD_SYSTEM_CONFIG_INFO.
STOP: 0x00000074
I have also had the blue screen errors c000021a, and 0xc0000221. But primarily am now getting the bad_system_config_info every time.
Need pass code for mw hp dv2000 error code 03305....
View 6 Replies View RelatedHave fan problem. Has run intermittently.
Doing diagnostic using Fn and power up screen gave err msg 2000-8010.
BIOS is 2.5.2 Revised. What is this error?
Fan on Inspiron 1520 not coming on. Diagnostics gave error code "3700:011B". Took fan out (it wasn't even dirty) and jumpered red & black wires (p.s. don't know what yellow wire is for) to a 5 volt dc power source - fan worked fine. Put laptop all back together - fan still not coming on...
View 3 Replies View RelatedI'm no computer genius but I'm no 'dummy' either. I tried like heck to resolve this problem but just cannot figure it out. I called Dell cust svc but they want $49 to talk to INDIA! ugh.
I need a response from someone who at least "writes" English! Bought my mom a notebook a few years ago and it was just fine until recently when my niece
tried to get on and got the Administrator's login box (blank screen underneath) - nothing before it except the Windows logo with the little boxes blinking across. No matter what we do, it won't allow a bypass ......
I have an Inspiron 1505 about five years old. Lately my computer has been freezing and shutting down for no reason. I can be just reading and it'll freeze. This isn't the first time it has been happening. Back in April I had the same problem. The error message indicated that my hard drive was going bad so it was replaced. Now it's doing it again. This time I got error code M1004. From what I read, this is something about heating. What I have noticed is that the bottom of my laptop runs extremely hot. Will getting a cooling pad?
View 4 Replies View RelatedI have a Dell Inspiron Mini 10 laptop and today I have switched it on and got these codes:
STOP: c000021a [Fatal Error]
0xc0000135 (0x00000000 0x00000000) The system has been shut down
Is there any way I can fix this? the problem is that I can't log on past the codes to download anything so its hard to do it from the laptop.
Is there a way to get past the codes.
I have a Dell Inspiron 13z. When I turn it on it says recovery that the PC could not start properly. Error code 0xc0000001
View 1 Replies View RelatedThis morning the fan on my XPS13 L322x came on and now won't turn off.
I ran the diagnostics and the fan test failed;
Error Code = 2000-0511, Validation 100696
During the test I noted these temps
CPU = 44
Ambient = 44
Chipset = 66
I'm running Ubuntu and have BIOS A06 currently.
I have Dell Studio 1558 laptop, when i switch ON it is not booting.. i can hear the sound of fan & the Drive but i cant see anything on the screen, sometimes it will boot up but it will work for only 10 mins then the screen will go off & will never come ON again.
When i ran the Diagnostics by pressing F12 during startup i got an error message
**LDC -LCD connection Test**
----
Error Code 0321
Msg: Error Code 2000-0321
Msg:LCD EDID - unable to access EDID EEPROM
I am an owner of a dell inspiron n5040 and im having the error code 2000-0142 on my laptop,
I was wondering if it was possible for someone to check out what problem causes my laptop to not work properly.
I have a Dell Inspiron 15R laptop that is 2 weeks out of warranty, and have only owned this laptop for 1 year from new. On Jan. 1 2015 i started my new year with a 2000-0142 code as i started up my computer, so i could skype my family and friends wishing them a happy new year. After doing some serious investigating with family, friends and the internet i found that this is a common problem with Dell's Hard Drive's and they seem to do nothing to rectify this issue...
View 1 Replies View RelatedI forgot the bios password I have a hp 2000-20th.
The error code I get is 6119055