Fan on Inspiron 1520 not coming on. Diagnostics gave error code "3700:011B". Took fan out (it wasn't even dirty) and jumpered red & black wires (p.s. don't know what yellow wire is for) to a 5 volt dc power source - fan worked fine. Put laptop all back together - fan still not coming on...
View 3 RepliesI reformat my Dell inspiron 1520..first i installed the dell media direct and install the OS..
then i installed the driver...then after that my laptop keeps on having error..it says an error has occured..
windows will automatically shut down to prevent damage..keeps on having error..i dont know what to do ( help pls...i must use the safe mode to prevent this error
I'm no computer genius but I'm no 'dummy' either. I tried like heck to resolve this problem but just cannot figure it out. I called Dell cust svc but they want $49 to talk to INDIA! ugh.
I need a response from someone who at least "writes" English! Bought my mom a notebook a few years ago and it was just fine until recently when my niece
tried to get on and got the Administrator's login box (blank screen underneath) - nothing before it except the Windows logo with the little boxes blinking across. No matter what we do, it won't allow a bypass ......
I have an Inspiron 1505 about five years old. Lately my computer has been freezing and shutting down for no reason. I can be just reading and it'll freeze. This isn't the first time it has been happening. Back in April I had the same problem. The error message indicated that my hard drive was going bad so it was replaced. Now it's doing it again. This time I got error code M1004. From what I read, this is something about heating. What I have noticed is that the bottom of my laptop runs extremely hot. Will getting a cooling pad?
View 4 Replies View RelatedI have a Dell Inspiron Mini 10 laptop and today I have switched it on and got these codes:
STOP: c000021a [Fatal Error]
0xc0000135 (0x00000000 0x00000000) The system has been shut down
Is there any way I can fix this? the problem is that I can't log on past the codes to download anything so its hard to do it from the laptop.
Is there a way to get past the codes.
I have a Dell Inspiron 13z. When I turn it on it says recovery that the PC could not start properly. Error code 0xc0000001
View 1 Replies View RelatedI am an owner of a dell inspiron n5040 and im having the error code 2000-0142 on my laptop,
I was wondering if it was possible for someone to check out what problem causes my laptop to not work properly.
I have a Dell Inspiron 15R laptop that is 2 weeks out of warranty, and have only owned this laptop for 1 year from new. On Jan. 1 2015 i started my new year with a 2000-0142 code as i started up my computer, so i could skype my family and friends wishing them a happy new year. After doing some serious investigating with family, friends and the internet i found that this is a common problem with Dell's Hard Drive's and they seem to do nothing to rectify this issue...
View 1 Replies View RelatedI'm currently using my laptop for 2 months and today when I shut down my Dell Inspiron 15 a while ago and open it again after an hour I continuously get this error
Your PC ran into Problem and it needs to restart. We're just collecting some error info, and then we'll restart for you.
If you'd like to know more you can search online later for this error. 0xc000021a
After it automatically restart it says: RECOVERY .... Your PC couldn't start properly
After multiple tries, the operating system on your pc failed to start, so it needs to be repaired Error code: 0xc0000001
You'll need to use the recovery tools on your installation media. If you don't have an installation media (like a disc or USB devices), contact your system administrator or PC manufacturer.
I have an Inspiron N5050 that is 8 mos old and is rarely used. When turned on, it shows windows loading files bar, then a start up repair screen but does not go beyond that. When I exit that screen, it shuts down. I restarted it and ran the F12 diagnostic test and it showed a fail with error code 2000-0142. This should still be under warranty because I bought the computer on 8/4/12. Is there anything I can do on my side or will this need to be returned to Dell for evaluation?
View 2 Replies View RelatedI have a Inspiron N7110 that is failing the hard drive diags with error 2000-0142.
I assume the drive needs to be replaced. Is this the case?
On the start-up diagonstic the error code 2000-0146 came up. The computer is booting fine, though sometimes does not shuts down properly. Should I look into getting a new hard drive right now. Is it going bad?
View 15 Replies View RelatedI bought a Dell Inspiron 1545-8523 for my daughter for christmas. It has been operating fine until last night. I dont have much technical ability at all. I have however run a diagnistic F12 and it has come back with error code 2000-0142. The laptop does actually start up , but is very sluggish.
View 1 Replies View Relatedmsg hard drive
0-S/N WXN1E53EN501
Short self test unsuccessful
Tried other diagnosis, no joy
When i have done my diagnostic test in my windows 7 inspiron laptop it shows error code0142
What i need to do now to get my lap in a working conditions
My dell laptop will load the dell screen but then go black. It had windows 7 on it. So I went under and selected diagnostic test under adipto? In which I am use to seeing a Bios screen labled Bios. The diagnostic ran but and passed everything except my hard drive. It recognizes and list on the Blue screen HDD Fixed and list a number. BUT under my diagnostic ut list the following code. 2000-0151 Vadlidation 62721 Msg : Hard Drive 0- #########, incorrect status =3E.
Do I need a new hard drive or does this mean I have bad sectors?
When I am loading windows on my dell inspiron 6000 laptop it stops and I get a error code 0x80070001 what does that mean ....
View 4 Replies View RelatedI am using dell inspiron 3521 windows 8 preloaded. Whenever i start my laptop. It stuck on dell logo with full blue bar. And after few minutes, a blue screen shows that some files are missing. Error code: 0xc0000185.
When i diagnosed..its showing error code 0142. Hard drive error. And when i force it to boot. It shows in black screen with white letters "no bootable device found, press any key". And when i press any key.. Its repeating the same error... Now i dont know what is happening.. Warranty over..
My dell inspiron 3250 started to shut down automatically these days. When i ran the Diagnostics its showing an error code : 2000-0511, Validation: 78746 .
View 3 Replies View RelatedI ran a diagnostics ePSA test on my Dell Inspiron 3540. It gave me the error detailed as:
Error Code: 2000-0142
Validation: 79886
Message: HD 0 s/n - xxxxxx, short self test unsuccessful
My system is working fine except that whenever I play a video file in VLC, it stops close to the end and then after a while the system hangs.
I have these problem for my computer when I do the pre-boot system assesment build 4129 test.
I still can operate my computer. I already re install, but it still automatic restart sometime, and will display the blue screen and display the error kernel-data-inpage-error.
Basically the hard drive (of my XPS m1530) has been going a bit slower than usual recently.
I figured it was just Vista been more sluggish than usual.
So I decided I'd back it up, wipe it and install my new copy of Windows 7 RTM.
After booting from the DVD, setup stopped halfway through giving me this '0x00000e9' error code.
I subsequently ran the dell diagnostics.
Which gave me this :
Hard Drive - DST
Test Results : Fail
Error code 2000-0142
Msg : hard drive 1 - Self test unsuccessful.
Status : 70
OS: Windows XP SP3
I had two 512MB 2Rx16 PC2-5300S-55-12 sticks of ram in my laptop.
I purchased 2 x 2GB 200PIN DDR2 SODIMM 256MX64 sticks to install.
When i put in the new sticks I get 2 short beeps and it doesn't finish booting the the OS.
Am I doing something wrong? I know that the OS will only recognize 3Gb but it should at least boot right?
Also after the post check this pops up:
The amount of system memory has changed.
If you did not change your memory...
To resolve this issue, try to reseat the memory
I am having a major issue with my Dell XPS L702x laptop at the moment, in that it cannot boot up at all, rendering it completely unusable.
When this first happened, the laptop used to progress through the dell screen, the 'starting windows' screen, and then just hang at a blank screen, or with a blank screen with the windows 7 background and a mouse cursor. This happened in both normal startup and attempting safe mode.
I have tried starting in best last known configuration, resetting the bios to default settings. I eventually got startup repair to work, but it didn't do anything, nor did system restore.
I run diagnostics, and receive this error right at the beginning of the test:
ERROR CODE 0146.
Msg: Error Code 2000-0146
Msg: Hard Drive 0 - self test log contains previous error(s).
I continue the diagnostics and everything else passes okay.
However, now when I try to boot my PC up in normal or in safe mode, I get past the dell and windows startup screen and instead of the hang I simply get a blue screen error:
BAD_SYSTEM_CONFIG_INFO.
STOP: 0x00000074
I have also had the blue screen errors c000021a, and 0xc0000221. But primarily am now getting the bad_system_config_info every time.
Have fan problem. Has run intermittently.
Doing diagnostic using Fn and power up screen gave err msg 2000-8010.
BIOS is 2.5.2 Revised. What is this error?
I recently got a CD-ROM that was for the PCGA-DSM51 and other docking stations. The reason why I got this since my original CD-ROM isn't working right anymore. But the problem I' am having is that it says that my CD-ROM is "epson dl-v100 ieee 1394 sbp2 device"
I don't think Windows XP detected the CD-ROM right since it gives a code 10 error and can't start. I basicaly need help so I can make my CD-ROM work
right.
My notebook is the Sony PCG-R505ESP.
I got Vaio FZ190 with faulty Nvidia chip, then i had my motherboard replaced. The problem is i cannot restore my C: drive using DVD i made. So, i tried hidden partition by press F10 and is also not working. Here is the code i got while i was trying to do so,
"Cannot use this recovery disc for this computer. Confirm the model number"
when I click Ok, this message appears
"error: CompareSnyIniToPacIni, Error: 92"
Then I click OK and it drops me back to the Vaio recovery centre and this cycle will happen again when I repeat to restore drive c.
Both DVD and hidden partition was working just fine before i had my motherboard replaced. I search all thread and find out that system recovery will check my BIOS before it can restroe my C: drive so i try to reset BIOS setting by pressing F9 in BIOS setting and it's still not working. Now, i can use my vaio just fine but i can't restore my C: drive.
This is what it said in my BIOS:
BIOS Version: R0050J7
Machine Name: VGN-FZ190
Serial Number: 9623323-3000004
UUID: 96a11200-f896-11de-8128-0024beb312c0
This morning the fan on my XPS13 L322x came on and now won't turn off.
I ran the diagnostics and the fan test failed;
Error Code = 2000-0511, Validation 100696
During the test I noted these temps
CPU = 44
Ambient = 44
Chipset = 66
I'm running Ubuntu and have BIOS A06 currently.
I have Dell Studio 1558 laptop, when i switch ON it is not booting.. i can hear the sound of fan & the Drive but i cant see anything on the screen, sometimes it will boot up but it will work for only 10 mins then the screen will go off & will never come ON again.
When i ran the Diagnostics by pressing F12 during startup i got an error message
**LDC -LCD connection Test**
----
Error Code 0321
Msg: Error Code 2000-0321
Msg:LCD EDID - unable to access EDID EEPROM
My laptop model is DELL XPS 11. when i press the power on button, the Dell logo came out and it loads "preparing automatic repair...", then the whole screen turned black, there is nothing on the screen but I can only see the mouse cursor.
What did i do?I rebooted the laptop and immediately pressed F12 to go into diagnotics. After scanning, there was an error code 2000-0142 and the error message was Hard drive 0 - short self test unsuccessful. I even tried to use recovery media to factory reset my laptop, but it failed.I did not open up my laptop to check for any cable connection problems, because I dont know if it will void my warranty. My laptop is still under warranty.