my DV9774ca I plug my HDMI cable in and watch on TV just fine, but have had to manually switch from laptop speakers to digital output manually. You have to remember to do this before starting Media Player, etc, or have to go back and start again.
Its the Realtek High Definition Audio.
how to get it to automatically switch audio to the digital when HDMI is plugged in?
I would like to listen 24bit music from my Vaio to the iBasso D10 portable amp which I'm going to purchase. This has a USB connection which only supports audio up to 16bit 44.1khz, but through the digital inputs (optical or coaxial) it supports 24bit input.
The Vaio FW11S only has an analogue headphone jack, and a HDMI output. Is it possible to get 24bit digital audio from my HDMI output to the digital inputs on the iBasso?
Is there a HDMI > optical or HDMI > coaxial converter/cable/plug/etc. available, and what would be a very good quality one?
how about this? [url]
Will this support playback of 24bit FLAC files through the optical out?
I have a HP 8510p (XP32) that works really fine. The only thing that I can not make it happen is that whatever I try I can not get the DD, DTS work between my laptop HDMI and my receive. I recieive only stereo (Audio HDMI OUT is selected).
Question:
1) How on earth can I get DTS/DD from my laptop HDMI when i play a mkv with DTS/DD audio?
2) If I connect the laptop to the TV via HDMI and the laptop to my amp via optical, can it make the trick? (the only problem here is that, my laptop does not have optical out, just HDMI and analog, but using a docking station i can have optical out...)
i just bought a fatal1ty headset and now im experiencing some minor problems with my sound. obviously the soundcard makes them since i installed the newest software and drivers for the headset.
until now i was using the driver i got from my notebook's download page by HP, version 5.10.1.5220 from 05.02.2008.
now i looked through the net and found quite a lot of these soundmax drivers, but im not sure which one to take..
i learned that the 6.### drivers are for vista, and the 5.10.02.### drivers are for xp x64. so i need a 5.10.1.#### one, preferably newer than 5220. now on the page i found them (www.versiontracker.com), there are quite a lot of these drivers (218 to be exact) and sorting them by the release date confuses me a bit, since the newest 5.10.1.#### driver is 5.10.1.5860, but a bit earlier 5.10.1.6110 was released. so which is the newest one?
and all are from 2008.. are there really no newer ones? on the official soundmax page there are none, even no support section.
the device id is HDAUDIOFUNC_01&VEN_11D4&DEV_1981&SUBSYS_103C30C5& REV_10024&1D8C0F4E&0&0001, since one cannot identify the exact device from the name...
So as the title states, I am wondering if it is possible to play a video with audio encoded in Dolby Digital on my laptop, pass it through to my TV via HDMI, then out via optical to my receiver. I have a friend who owns a HP business laptop with a SoundMAX sound card, but also an ATI graphics card. We are both running the Realtek ATI HDMI 2.39 drivers, I have the latest drivers from Dell for the IDT sound card on my Studio XPS 16 (1640). He says (and I've seen) he is able to do Dolby Digital this way through an option (see attachment).
However, I do not have this same "Custom" tab / option, and we are running the same driver version (at least to my knowledge). Can anyone help me in finding out if this is doable, and if so, what software (and versions) are required?
i have a DV2 and it supports audio over the HDMI, does the DV3 support this also?
View 3 Replies View RelatedI am just now getting around to using my DV5t that I purchased back in January. The system is still configured *exactly* as shipped from the factory.
One of the first things I wanted to do was to test its ability to play DVDs, etc when I am on the road, so I hooked it up to a 32" LCD TV via an HDMI cable. The display was recognized just fine, and I configured dual view with the LCD TV as the second monitor.
When I dropped a DVD in and fired up Windows Media Player and HP Quick Play, I realized that I needed to tell it to use the speakers on the TV instead of the internal speakers.
But when I went into the Sound control panel to make the change, the device "NVIDIA HDMI Output - NVIDIA HDMI Audio" showed as 'Not Plugged In' and the device only appeared when "show disconnected devices" was checked..........
I've been having some problems hooking up my girlfriend's dv5 to our TV. It no longer plays audio over the HDMI connection.
I mostly use VLC player to play HD content and at first it worked, with some tweaking. I had to disable and enable the audio track in VLC and then it would play through the TV. Now, it no longer works. In the audio control panel, or whatever its called (Vista), it says the HDMI device is enabled, but nothing seems to be using it.
I bought the Aspire R13 just 2 days ago, but the screen visualization doesn't automatically orientate when I rotate the display. I checked the auto rotation on the screen properties and it is on.
The auto rotation was the main reason to choose this new laptop....Could be the sensors do not work properly?
I am trying to find both the graphics and sound drivers for my compaq 8510p. I have tried all the recommended things...
View 1 Replies View RelatedIs there any reasonable way to get digital audio out of the E6400? IE without adding a usb sound card or something. I thought the displayport would send the digital audio to my Dell 3008 display but does not work.
View 10 Replies View RelatedMy Acer Aspire 5542g laptop has Realtek Digital Output as well as default Speakers.
i always listen to my music on my laptop through headphones and i want to use the Digital Audio feature for better sound, i have read other threads on this feature in the forum but they have always mentioned the TOSLink connected to some sort of amp or external speakers. my question is can i use the TOSLink adapter to get digital sound through my headphones?
type of connector needed for digital audio? I have not been able to confirm that my Acer 7720-6395 NB has a dual digital connection. The manual calls the jack a S/PDIF but looks like and allows a stereo plug to work. Talking to the folks at the Sony store claims that the jack could be a dual connector and would work with a headphone or a optical connection. Would love to watch a blue ray movie with 5.1 sound......
View 5 Replies View RelatedI have the following problem:
Sony Vaio VGN-FW370J with Win Vista Home Premium 64 with Aptio Utility.
I do have realtek hd audio card and this card should have digital output. My gf has a toshiba satellite with the same card and she has it but I don't. I called sony and they replied (twice with different technicians) that this feature is not available on this model. Both audio cards have the same chip so I suspect that this feature is disabled hw.
It is not a driver problem. The driver does not install the Realtek Audio Manager so within the OS there is no way to enable it.
Recently bought HP ENVY m6-1231ea with beats audio and tripple bass subwoofer. But how to get working subwoofer ? Pressing fn + b does nothing...
View 2 Replies View RelatedCan anyone that has the Sony Vaio Z Series Laptop tell me if the HDMI output on the Z Series outputs 5.1 Dolby Digital surround Sound?
View 3 Replies View RelatedI have updated my HP Pavilion G6 2242sf to Windows 8.1 and the sound quality is not as good as in Windows 8 : In the Dolby control panel the equalizer works but switch the Dolby Advanced Audio checkbox has no effect so there is no more surround virtualization and the 3 effects "Movie", " Music", and "Voice" are not working anymore.Now my laptop speakers sounds choppy.
View 4 Replies View RelatedYesterday a sony partner changed the mainboard in my z. Vista runs fine but the z didn't power off! When i shutdown the system it will reboot!
Hibernation and Standby also doesn't work - the screen went black, hdd is working and after a few seconds the desktop is back!
What can i do? I've tested some of the recovery points without success.
Same problem when starting in safe mode!
For information: when shut down in the bios everything is ok, also when booting from an ubuntu cd!
There must be a way to fix this - i hope without doing a system restore from the dvds....
My laptop doesnt want to turn on at all while pressing the power switch. When this problem occured, i dont know how the laptop automatically powered on without me touching it. THe second time it turned on, i tried to pressed the power button, the laptop didnt go to sleep mode, which is supposed to happen normally. I tried holding the switch for more than 10 seconds, it didnt powered off. When i hit restart from the charm bar, the laptop shuts down and turns back on without problem.. But then i hit the shutdown, it turned off... But, i cant get it back on, i even tried holding it for a minute. I even took the battery out, tried it with the AC, but no luck..
View 9 Replies View RelatedI have a Lenovo t420s with dualboot win7 and Ubuntu. I never had any problems until now and could switch on/off my wireless and bluetooth connections via the Hardware Switch (right bottom left of the notebook) or via FN + F5.
However, without any specific reason the wireless and bluetooth was switched off and the the system tells me that I have to switch on WIFI via the Wireless Radio Switch. However, although I can move it, it doesn't make any difference for the Switch.
I tried to reset the BIOS to Default and changed the network settings, and also rebooted several times. I won't work with any of the two systems.
I use my Dell laptop as an HTPC, I have never had this problem before but now all the sudden I'm having this problem.
View 10 Replies View RelatedI have the Y510P with Windos 8.1, latest graphic drivers. I'm connecting it to my HD TV via HDMI and the image doesn't fit well in my TV, it's a little zoomed in. I've been searching for a solution in all the menus from Intel's HD 4600, nVIDIA's Control Panel, Windows scaling... NOTHING works. I have another laptop and it has an option that scales the image and the TV shows what is supposed to show.
How can I solve that and fit what I see in my laptop's screen in the second screen (TV)?
My laptop: Lenovo Y510p, Intel Quad-Core i7-4700MQ up to 3.4GHz, Intel HD Graphics 4600, nVIDIA GeForce GT 755M 2GB GDDR5, 8GB RAM, 15.6" Full HD, 1TB 5400rpm HDD + 24GB SSD M.2 (cache), Intel Wireless-N 7260, 72Wh
my hp 2000 laptop doesn't recognize tv with hdmi cable. I get the "doesn't recognize any other monitor" error when I attempt to "detect".
I recently upgraded to windows 8.1
I have the AMD Radeon HD 6310 Graphics
The TV is a Hotel Phillips HD TV.
My game system works using VGA cable
well I have a l702p 3d, I connect it to my samsung smarTV and it works wonderfuly (hdmi ofcourse), but I have a FLATRON W2243T LG monitor (it only has DVI and VGA ports) I try to connect it using hdmi-dvi adapters but the laptop does not recognize the monitor!
View 3 Replies View RelatedI have a Dell Studio 1537, and I reguarly use my TV with my laptop as an extra monitor, and when I plug the HDMI cable in, the audio switches over to the TV with no problems.
However, it seems that whenever I restart my laptop, (even if it was turned off after having taken the HDMI cable out) the audio is being sent through HDMI, and I have to go and change it to the speakers of the laptop.
Is there any way of basically setting the laptop to send audio through HDMI if it is plugged in, and the speakers if not?
I did a clean install of Windows 7 on my Z590 after upgrading the BIOS to R2170M3. Everything works perfectly but I just can't get any sound over HDMI on my TV. Totally ruins the Windows 7 experience...
I have the NVIDIA 187.35 drivers from Sony installed. When I install the previous NVIDIA drivers for Vista (174.49), I immediately get sound over HDMI. Apparently this is an NVIDIA problem.
When i turn on the laptop, display doesn't turn on even when external monitor connected via VGA/HDMI.. I hear CPU Fan sound, keyboard lights on, power light on.
View 1 Replies View Relatedi just got a new HDTV and I want to watch movies in surround through it. Unfortunately, passthrough is not working, only 2ch PCM stereo, I know my sound system can decode it,
it has done it through an old DVD player on optical no problem (monsters Inc DVD)
I got my xps 1530 on monday and I used vista media center last night to record some HD shows. Later on I connected my 1530 to my HD tv and set the audio out to hdmi instead of the speakers. When I played back the show, there was no audio on my tv, but when I started up media center, the start up sounds and the sounds when you navigate through media center played back through my tv speakers. Does anyone know how to get it so the shows sound will play back through my tv speakers?
View 10 Replies View RelatedIv just started using my laptop to output HDMI and iv got a problem with the audio. Iv set the laptop to output the audio and it does work, but whenever a program ends and i open up another one it runs silently, despite me having changed nothing except the program.
In order to get the audio back i have to randomly unplug the HDMi cable, mute it, pause it, unmute it unpause etc and eventually one of these fixes the audio issue
Can anyone shed any light on what could be causing the audio to work sometimes and not work others?
