type of connector needed for digital audio? I have not been able to confirm that my Acer 7720-6395 NB has a dual digital connection. The manual calls the jack a S/PDIF but looks like and allows a stereo plug to work. Talking to the folks at the Sony store claims that the jack could be a dual connector and would work with a headphone or a optical connection. Would love to watch a blue ray movie with 5.1 sound......
I have the following problem: Sony Vaio VGN-FW370J with Win Vista Home Premium 64 with Aptio Utility.
I do have realtek hd audio card and this card should have digital output. My gf has a toshiba satellite with the same card and she has it but I don't. I called sony and they replied (twice with different technicians) that this feature is not available on this model. Both audio cards have the same chip so I suspect that this feature is disabled hw.
It is not a driver problem. The driver does not install the Realtek Audio Manager so within the OS there is no way to enable it.
HP Pavilion dv6-7030tx Entertainment Notebook PC Windows 7 Intel i7-3610QM CPU @2.3GHz 8Gb Ram
I have no audio. It has been previously working, but suddenly stopped. On the small speaker icon there is a red cross indicating "No Audio Output Device is enabled" When I log on to the computer i get a window that says "CWindowsSystem32AUDIOSES.DLL is not designed to run on Windows or it contains an error."
I have attempted to Troubleshoot but unable to get any sound. I have updated the Audio driver, but it is the up to date driver.
Device Manager: - Sound Video & Game Controllers
Bluetooth Hands free AudioCyberlink Webcam Virtual DriverIDT High Definition Audio CODECIntel Display Audio
I have followed the instructions in Testing for Hardware Failure on HP Support.
My Acer Aspire 5542g laptop has Realtek Digital Output as well as default Speakers.
i always listen to my music on my laptop through headphones and i want to use the Digital Audio feature for better sound, i have read other threads on this feature in the forum but they have always mentioned the TOSLink connected to some sort of amp or external speakers. my question is can i use the TOSLink adapter to get digital sound through my headphones?
PROBLEM: Six Months Ago, the Sound Device Stopped Working, I get the following message (No Audio Output Device is installed): It is as if NO audio device is installed on the motherboard.
Here's the catch: Sometimes when I START my computer the Device Works, and Sometimes It doesn't. If I restart the computer like 20-30 consecutive times (IF I'M LUCKY) chances that in one of these restarts the device MAY Work. Sometimes i go weeks without Audio.
Here are *some* things I've Tried: 1) Format the System:
Different OSs I've tried: Windows XP Home/Pro, Vista, 7 and Linux.
The expirience the same problem with all these OSs. So It's not an OS thing............
I had vista installed on my laptop, Acer 6920, (first OS) and it was direct from factory so everything worked fine. I then installed ubuntu and everything still worked fine. I then deinstalled both of those to put on windows 7 RC where all my hardware was working perfectly (minus the fingerprint reader but i honestly couldnt care about that thing) so my computer eventually got pretty bogged down with crap to the point where boot was about 30 minutes. during this whole time my sound seemed to work, but near the end windows stopped finding any internal sound related hardware (the speakers and the mic). For other reasons i did a clean reformat (3 times) and reinstalled 7 Professional 32 bit and when i booted i downloaded all the drivers and everything seemed to install correctly, but when i rebooted the sound still didnt work nor did the mic. the exact error message windows is giving me is "No Audio Output Device found" however when i plug in a headset or a bluetooth adapter + headphones there is audio and it works perfectly. I really need sound to work as some programs crash if they dont detect a sound output and also for monitoring audio recordings.
I have tried installing all of Realtek's drivers. Literally all of them. None of them worked what so ever despite clean installs and deinstalls.
I now am running 64bit and ive almost given up on this problem. I bearly saved this computer and i dont wanna have to buy a new because of sucha stupid issue like this. More info:
Under the hardware manager in windows there is no tree for sound devices. there was an unknown component which i put forceware on as i thought it was the sound device but no go.
DXDIAG: Operating System: Windows 7 Ultimate 64-bit (6.1, Build 7600) (7600.win7_rtm.090713-1255) Language: English (Regional Setting: English) System Manufacturer: Acer System Model: Aspire 6920 BIOS: Ver 1.00PARTTBL6 Processor: Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz (2 CPUs), ~2.2GHz Memory: 3072MB RAM Available OS Memory: 3070MB RAM Page File: 1303MB used, 4835MB available Windows Dir: C:Windows DirectX Version: DirectX 11 DX Setup Parameters: Not found User DPI Setting: Using System DPI System DPI Setting: 96 DPI (100 percent) DWM DPI Scaling: Disabled DxDiag Version: 6.01.7600.16385 64bit Unicode
I recently received this acer laptop as a gift. Right from the first time I started it I noticed issues with the sound. With any audio that played there were crackling noises.The crackling got worse and worse so I Decided to restart the laptop and then the sound stopped working altogether.I tried reinstalling the Realtek HD audio drivers that came with the laptop but that didn't work and I still got a "No Audio Output Device is Installed" message in the bottom corner.
I tried reinstalling the drivers AGAIN, and the sound worked. All seemed well until I woke up the next day with no sound yet again.I then tried downloading new drivers from the realtek website, even these drivers didn't work. The only solution to the problem seemed to be basically uninstalling and reinstalling the realtek drivers until they worked, and even then, the sound would still crackle horrendously.After getting fed up with this issue I tried to refresh windows, and even this didn't work.I have tried everything I can think of .....
Is there any reasonable way to get digital audio out of the E6400? IE without adding a usb sound card or something. I thought the displayport would send the digital audio to my Dell 3008 display but does not work.
i just bought a fatal1ty headset and now im experiencing some minor problems with my sound. obviously the soundcard makes them since i installed the newest software and drivers for the headset.
until now i was using the driver i got from my notebook's download page by HP, version 220.127.116.1120 from 05.02.2008.
now i looked through the net and found quite a lot of these soundmax drivers, but im not sure which one to take..
i learned that the 6.### drivers are for vista, and the 5.10.02.### drivers are for xp x64. so i need a 5.10.1.#### one, preferably newer than 5220. now on the page i found them (www.versiontracker.com), there are quite a lot of these drivers (218 to be exact) and sorting them by the release date confuses me a bit, since the newest 5.10.1.#### driver is 18.104.22.16860, but a bit earlier 22.214.171.12410 was released. so which is the newest one?
and all are from 2008.. are there really no newer ones? on the official soundmax page there are none, even no support section.
the device id is HDAUDIOFUNC_01&VEN_11D4&DEV_1981&SUBSYS_103C30C5& REV_10024&1D8C0F4E&0&0001, since one cannot identify the exact device from the name...
my DV9774ca I plug my HDMI cable in and watch on TV just fine, but have had to manually switch from laptop speakers to digital output manually. You have to remember to do this before starting Media Player, etc, or have to go back and start again.
Its the Realtek High Definition Audio.
how to get it to automatically switch audio to the digital when HDMI is plugged in?
I would like to listen 24bit music from my Vaio to the iBasso D10 portable amp which I'm going to purchase. This has a USB connection which only supports audio up to 16bit 44.1khz, but through the digital inputs (optical or coaxial) it supports 24bit input.
The Vaio FW11S only has an analogue headphone jack, and a HDMI output. Is it possible to get 24bit digital audio from my HDMI output to the digital inputs on the iBasso?
Is there a HDMI > optical or HDMI > coaxial converter/cable/plug/etc. available, and what would be a very good quality one?
how about this? [url] Will this support playback of 24bit FLAC files through the optical out?
My volume icon in the system try reads "No audio output device is installed." The audio device is not even recognized in the device manager (i.e. there is no yellow exclamation point or conflicted device to update a driver to). The system simply does not recognize the fact that a sound device exists.
I have tried many, many things: Fresh install (as per the sticky-guide) of Windows Vista x64 Home PremiumFresh recovery from system recovery partitionTried all versions of the drivers from the HP support page (Realtek and Conexant) --- I believe I have conexant, though.Safe mode driver installsDriver installs on a driver signing rebootPutting the computer into hibernate, then resuming (odd, I know.. I heard it worked sometiems).Made sure "Windows Audio" service is enabled in Administrative ToolsServicesInstalled Windows XP drivers for "Microsoft High Definition Audio controller"Flashed BIOS to most recent version F.32Updated chispet drivers to most recent nForce availableeInstalled Vista SP2 I'm sure there must be one or two more things that I've tried and just can't remember. I am running Windows Vista x64 Home Premium with SP1.
I have an HP DV6700 Laptop, and I recently installed Windows 7 Professional (64 bit) (The full version from MSDN academic alliance, not the release candidate). A few days afterward, I had an issue where my speaker icon has a red "x" over it, and when I hover over it it says "no audio output device is installed". The funny thing is that the speakers worked after windows update installed an update, then they stopped a few days later, and I cannot for the life of me get the speakers to work again!
I can silence the noise lowering volume on the Stereo Mix High Definition Audio Codec. However, my AMD HDMI Output is greyed out and static, or as I understand from other complainers; NOT PLUGGED IN. What can I do to solve this problem. It is a problem for when I open the Stereo Mix High Depfinition Audio Codec, a shrieking noise leaves me depth, and it eats the volume all up.
My system: Windows 7HP Lop Top - A6 - 3400M - APU with Quad Core Radeon HD Graphics - 6.0GB RAM - AMD Radeon HD 6520
I have no sound, although everything tests fine and volume is changing. No sound from speakers or output to headphones. I have tried all invetigations, everything is OK including Windows Audio, set to automatic.
HP Envy 15 Product Number A9R05PA#ABG running Windows 7 64 bit.
Also, while sitting in its usual well ventilated space it has gone in to thermal shutdown a few times when I wandered off, and froze once on startup. I am now backing up everything ...
Suddenly my computer has no sound what so ever. It doesnt work when I plug in headphones, either. When I hold the mouse over the sound icon in the bottom right corner of the screen it says, "No Audio Output Device is Enabled."
I have Windows 7 Home Premium 64-bit Service Pack 1. My computer's product number is XZ046UA#ABA.
Do I need to install a new driver, or something else?
I know there are users who have been able to get sound out of their E6400s over Displayport, but all the users i have heard from and read about this from have had integrated intel video. Are there any E6400 with nVidia quadro nvs160 users that have successfully gotten digital audio out through the displayport using a displayport --> HDMI cable?