HP/Compaq :: HP DV 9000 Hinge
May 4, 2009Is there a problem with the left hinge on the HP laptops?
View 6 RepliesIs there a problem with the left hinge on the HP laptops?
View 6 RepliesI just wanted to share my experience on undervolting my HDX 18t 1103EA, Intel Quad 9000-2Ghz, 4GB DDR3 RAM, 9600M GT-1gb, Vista x64. After reading and trying the undervolting guide (thanks to flipfire), I couldn't make rmclock to work. Anyway because Q9000 has only 4 multipliers: 6x, 6.5x, 7x and 7.5x and rmclock does not support half ones, I decided to try CrystalCPUID. It can do only three ones and I choose 6x, 7x and 7.5x. I managed to go down to 1.163- stable on all three. CrystalCPUID would not allow any lower than that, although according to Intel Q9000 lowest voltage is 1.050. Strange enough both CPU-Z and Everest show that this the actual voltage when CrystalCPUID is active. Also when it is not active the cpu works only on the highest multiplier- 7.5x. My idle temp didn't really changed- it is always around 48C-55C (no AC in my room). I tried to buy CpuGenie (10 euro is nothing for some extra life on a 1300 euro mashine, but paypal asks for registration and I don't want to register.
View 4 Replies View RelatedI just received my HDX18t yesterday and noticed that the upper and lower hinge cover does not fit together. In fact it looks like the factory pried it back open - look at attached photo. I called the HDX support line who transferred my to sales who transferred me back to the HDX support line just to find out that I have to send in my laptop to get it fixed in stead of them just sending me the part. The problem is only cosmetic so I don't want to have to send my new computer away for several weeks! Has anyone had a similar experience? Do you think if I talk to the right person at HP they'll just send me the part?
View 3 Replies View RelatedBroken left hinge is a known problem in HP Pavilion dv9000/dv9100/dv9200/dv9400 notebooks.
HP was fixing this issue at no charge but not anymore. The warranty program has expired on May 31, 2009.
I just finished step-by-step repair instructions.
Check it our here: How to replace broken left hinge in HP Pavilion dv9000
Make sure to use correct hinges. They are different for LCDs with single lamp and LCDs with dual lamp.
I have an older HP Pavilion dv 9000, with Windows 7. I was attempting to watch a video and noticed that the sound was muted. So, initially, I tried to turn it up, but it seemed locked. It had never done that before, so after several failed attempts, the mute sign disappeared and now it's just a red x, and when I go in to check it, it tells me that there is no sound hardware installed. I tried to install a new driver from your website but it is still not working.
View 6 Replies View Relatedif it's possible to upgrade the Inspiron 9000 video card to allow latest games to be played?
View 13 Replies View RelatedI have an XPS m1330 and it's cool but I dont like it because the hinge is naturally too loose so when I use it with my always-on carry case the screen just falls down and closes the lid when I'm lying on my bed due to gravity.
I also have a 1520 and the hinge is so stiff its awesome! You really need force to close it which is what I like!
Well I'm thinking of getting the XPS 16 and it looks like the same hinge design of the m1330 so I just want to know for those people who own the XPS 16 if the hinge is easily closed or not because if it is then I cant buy it.
I have a 5920g computer which I adore, sadly we always hurt the ones we love, I dropped it and broke the right hinge, because of that the plastic frame of the monitor ripped 2. It still works perfectly fine, but its annoying as hell to watch my lappy like this all the time. I called acer, and found a provider who can repair it for 400 dlrs (I payed 1000 dlrs for the lap) so well, its seem outrageous to me paying 40% of the total price for a hinge replace.
Anyway, I found the hinge and the other parts on Ebay singapore, for less tan 100 dlrs. So, heres my question, does anyone know how hard is it to replace this parts, I am a mildy medium kinda handy guy, with some hardware skills. So anyone know if this is hard, is there a guide around that can show me the process, or should I just pay the 400 dlrs and get this thing done.
Our Acer 5920 is less than a year old, but not by much so I gotta make a decision soon. I'm hoping to get some help from you folks.
There's a little crack in the frame surrounding the LCD screen. I attached an image.
This laptop has seen very limited use. I use a strong, well padded case when transporting.
I called Acer. A gal said I can send it to them, they'll make a determination whether it's covered or not, if not they'll call me and tell me how much it'd cost to fix, etc.
I'm not thrilled about sending it to Temple, Texas. Besides, what are the chances Acer will do the right thing and fix it?
Has anyone seen this kind of damage?
whether it's mostly cosmetic? I'm assuming the plastic shell doesn't actually do much, and that there's a metal hinge underneath that does most of the real work, but I can't tell for sure and have never taken apart a laptop.
Its not very strong wobbles a lot am I the only one?
View 10 Replies View RelatedI have noticed that the macbook pros have some sort of weak hinge. Is this problem also happening with the current macbook pros (June2009 versions)?
View 10 Replies View RelatedI might buy a Studio 15 soon and heard many people complain about the hinge on the back of the notebook being crooked...
View 4 Replies View RelatedMy M1330 hinge is too loose. How do you access the nuts to tighten it up? I don't know where they are, and how to get at them.
View 9 Replies View Relatedmy 1640 has a bit of a loose left hinge. I've read that a few others have had this problem as well. It's more of an aesthetic thing than functional, but it's worn on me, and I want to know if it's something I should be concerned about.
So, I set about contacting Dell via email. Turns out, my hardware support warranty has expired. Now, this is interesting, because I ordered it on 3/22/09, and received it 4/2/09. I have 353 days left of next-day business service, and 353 days of Premium XPS Technical Support (if that's what the P stands for on the warranty status).
I can't figure out how to contact this XPS Technical support...and, according to the website, I couldn't unless I ponied up some cash, anyway.
I purchased a fw235j notebook about two months ago and the circular hinge near the charge port popped out so that it sticking out very loose, preventing me from shutting my computer. I think it happened because of the tension of the charger plugged into it. Sort of hard to exlpain, but if you own this notebook you know what part I'm talking about. (And if you don't own it i would recommend against it just because of this serious design flaw lol).
Has this happened to anyone else with a fw235j? If so what did you do to fix it? I tried forcing the piece back in so that i could shut the comp but that isn't working. It looks like a little plastic piece might have snapped off but it's so small that I can't tell for sure. I imagine this could be a pretty common problem because of the way this piece was designed. I mean, mine broke after 2 months of normal use (no falls or anything).
anyway, my computer is still functioning fine-it can still charge, its shuts down and boots up fine. but because of that piece it won't shut which is more than just a little bit annoying.
i have only had my MBP 13 for a few months and thinking of giving my dell to my business partner. When i open the screen and then let it sit for a few seconds then attempt to open it a little more it squeaks and crackles sometimes like it was stuck in place. Does this happen to any of you and it is a problem that i should take it to apple for? Any solutions because it feels like i am going to break something sometimes when opening the screen a little more. Like a plastic rubbing against metal sound when something is too tight.
View 10 Replies View RelatedHinge issue for 6400/1505
View 6 Replies View RelatedIn the forefront we can see the hinge, and in the background we can see the piece behind the hinge (PBTH) - I have no idea what to call it, so from now on it will refer to it as the PBTH. =)
Ok, the problem I've had - for years - is that the PBTH does not stay where it is supposed to stay.. the three plugs do not stay in their holes. This has caused the outer plastic part of the LCD cover to split when I close the lid.
After a few years of this, the bezel cracked on me... so I decide to get a new bezel, and I tried to fix the hinge problem.
I'm not sure what mechanism was used to keep those 3 prongs in their holes, but I was going to try contact cement (for a lack of better ideas) - if you have any other ideas, please let me know.
But now my problem is this:
Last night I glued the PBTH into place, put everything back together..tried close the lid - was met with major resistance - and the glue/PBTH bond broke.
I know it's kinda dumb but it's annoyingly bright when I've got the computer on at night and it's busy converting video or doing other work. It's also less power used.
It can't be done through software but has anyone physically unplugged them? I've not opened up the case yet so I don't know how practical that would be, thought I'd ask around first.
I was at the Dell shop in Hong Kong the other day and had a close look at the XPS M1530, and frankly I was quite dissapointed by the loose/faulty hinge, as in part of the rotation is very loose, if you know what I mean.
What worries me is that Dell uses the same or similar hinge design on other models (Studio series, Inspiron 13), so just out of interest, who here already suffer from hinge issues with their XPS M1330/1530?
i dropped my netbook last night and cracked the left hinge. the hinge itself actually seems like a two piece and snapped back together, however it looks like it completely broke off the body.
the netbook looks like it still works, but im wondering what my options are, if any?
im assuming the standard acer warranty doesn't cover this...is it worth trying to fix myself, or is that even possible? should i just pray it keeps working and just hope for the best?
the hinge on the left side of my Vaio FW290 laptop just broke, and it's conveniently 1 month after my warranty ended - not that they would have covered it anyways, they probably would have called it physical damage and not under warranty. The hinge is completely seperate from the body and it just flops around, and that's not good considering it is where the power cord plugs into the laptop. I want to replace it, and I have no problem doing it myself, but I don't know exactly what part(s) to get.
I know this is a common problem with this model, so I was hoping someone else here has repaired theirs and could tell me what parts I need. I found a place that sells virtually every replacement part imaginable:[url]. I guessing that the part I need is one of these two:
HINGE LEFT: [url]
LCD BKT LFT: [url]
LCD HINGE COVER-LFT: [url]
I recently dropped my laptop from about a foot from the ground and the cylinder that connects the laptop to the lcd has cracked in 3 spots (1 major and two really tiny cracks) It seems as if the actual hinge to the lcd is still in good condition however. I have the extended warranty however I didn't buy the accidental damage protection. . The power button/cylinder had gotten dislodged a few months ago and i figure I can get these both fixed at the same time. . . Does anyone know how much sony would charge to fix/ know a way to get them to do the repairs for free?
View 4 Replies View RelatedI have noticed on various Vaio Z series laptops (mine included) that the screen, hinges and body don't necessarily always line up perfectly.
View 7 Replies View RelatedHOw do you keep this part of your laptop scratch free? IT's impossible and it's also very very annoying.
View 3 Replies View RelatedI have got Notebook Compaq Presario.. I cant connect to the internet using the wireless connection.. the reason is that i accidentally did some operations, and cannot switch on the light on the front panel of the notebook.. it does not work, i mean the light of the wireless connection button does not light.... I turned off something...
View 8 Replies View RelatedCan We Change Processor Of Hp Compaq Presario Which Is Having Amd Processor Right Now
View 3 Replies View Relatedi am looking to actually look, touch , try an HDX 16. But can't find a store that carries it.
View 5 Replies View Relatedwhere i could get most or all drivers for windows xp for the hdx 16t 1100,
View 5 Replies View RelatedDoes anyone have a good way to OC this laptop other than using ClockGen? I am basically wondering if there is a BIOS option. I know there are some OC guides out there, but this laptop is almost 3 years old, and as far as I can tell does not have an option in the BIOS. Also, my proc is the T2600, not the one is this review, but other than that exactly the same. I am looking to play around with this because it is old and I dont care too much if I fry it since my new hotness is on the way.
View 3 Replies View Related