I rescued an old laptop (Compaq Presario 1200XL500) from the recycling bin and would like to make it usable for a sixth grader. It boots with the base RAm but I would have to add one module. I need to find a user and/or service manual first so that I understand what this old laptop needs. No manuals seem to be available on the HP site. Are there other sites where I might find one?
View 3 Replies
I bought a used 5315 off ebay. It turned out to have a bad hard drive but I was able to save the pqservice partition and clone it to another drive. I successfully performed a restore and it is up and running. Just for future reference, I would like the service manual for this model but can't find it here.
View 4 Replies View Relatedtrying to find a SERVICE Manual for the Sony VGN-NW series. Sony are not providing them to the general public officially because of:
"In many of our products, dangerously high voltage remains in the system circuitry long after the unit has been disconnected from all power sources. For other products, our internal design and engineering data is both proprietary and confidential. Maintaining the security of this type of information is instrumental to our success as a business entity."
Could it compromise their success, or rather their income from hardware support ?
Danger form high voltage? No such a thing is possible in a laptop if one disconnects the power cable.
The above seems to me unacceptable when Dell, HP etc. provide free Service Manuals to anyone, on their Web sites.
I have an acre aspire 5535. I cannot login and keep going round in circles with the message which says "the user profile service failed to login. User profile cannot be loaded". Â I have switched off and opened again but no change.
View 1 Replies View Relatedi got a hp dv2000 and sometimes when i start it up and it gets to the user selection screen i cant find my cursor to select my user account. I keep moving my finger on the touch pad but cant find it. I have to hold the power button down it will shut off then i have to pull out the battery start it up and the cursor is now there this has happened like 5 times already what would cause this?
View 3 Replies View RelatedLong time lurker finally decided to join, best to start of my post count with a lengthy review on HP's new DV6 line.
I’d like to give people interested in HP's new dv6 line a heads up. This came about mainly due to the lack of reviews anywhere on the internet. Anyone with a dv6, feel free experience on the dv6.
Last weekend i purchased a HP DV6 3032tx with specs found here:
HP Pavilion dv6-3000 Entertainment Notebook PC series Home & Home Office
I went into JB HI-FI Australia buying a 13" mac and ending up getting this mainly due to the value, at a similar price as the dv6 was purchased at JB's cost price.
This has been my experience with the product so far
Design
The third generation of the dv6 line has been completely revamped by removing the numeric pad (I personally hate the num pads), and adding a nice chicklet keyboard with some quick launch buttons. One stand out factor is the thickness. It' still 30mm thick however the actually visible thickness is less than 1" thanks to some beautiful tapered edge design. The aluminium/magnesium shell with black keyboard is very mac like, and reminds me of HP's premium ENVY line of notebooks. On the i7 models only the palm rests and lids have a nice looking imprint finish which is very subtle and maintains its professional look. When the system is on, a HP logo glows white on the bottom left hand corner of the lid...
Prior to 2006, there was a distinct difference between Apple and the PC industry. Apple specialized in design, and still does, and the PC industry won over customers by wooing them with the best bargain available—features for the price charged—and almost always at the cost of a pedestrian design. In 2006, in an ambitious bid to gain market share, HP launched a massive and hugely successful marketing campaign known as, “The Computer Is Personal Again,” and redesigned all of its laptops with the extremely popular high-gloss Imprint finish. In less than 2 years, HP unseated Dell as the undisputed leader in PC shipments and maintains that lead today.
3 years later, HP is back again (perhaps) to change the game. Borrowing from design cues from Apple’s Macbook Pro line, HP launched the dm3 in late October and the tm2 earlier this month, with designs that feature a brushed aluminum finish. Is it successful? Read more to find out.
How this laptop was purchased
I had shopped for a while to look for a new computer to replace my aging dv6000t from back in the Windows XP days. My options were the HP Pavilion dm3t and the Sony VAIO CW. I visited a Best Buy to check out some of the laptops, and I can say that I was absolutely repulsed by the build quality of the Dells these days. They suck. Period. What really won me over from the Sony CW was the build quality of the dm3t. The aluminum finish really is outstanding. More on that later................
I returned from a 2 week holiday to find that I could not logon to my laptop. During the time I was away the laptop was powered down. When I enter the correct password to logon I get: "The User Profile Service service failed the logon. User profile cannot be loaded." message. I tried powering the laptop for 3 hours then tried to logon again but without success. How do I get around this?
View 3 Replies View RelatedI purchased a DV9500 laptop 2yrs ago for my personal business.One year into it's life the Nvidia GPU dies and I send it in for a motherboard replacement.After some searching it appears there is a major problem with the 8600 series of Nvidia GPUs. While there they also replace the keyboard (which had absolutely nothing wrong with it), but while replacing the keyboard they cracked the left corner of the top of the case.
I called HP when I received the laptop back and the only solution was to send it back (again) and be without my laptop and applications for at least another week. Kind of hard to use Dreamweaver and Photoshop when they are 2000 miles away!
Guess what? Exactly one year later... Nvidia GPU dies again. . Call HP on 6/26 to get the box shipped and again mention the case issue. I figure since I HAVE to send it in again that now would be a good time to get the case fixed. They received the laptop on 7/1 with an expected return date of 7/8, which I didn't worry about because they usually return well before the date promised........
I called HP to try and get a quote on the envy 15, unsurprisingly I get a foreign sales rep. I tell them I'm trying to get a quote to compare prices between this and the m15x which is almost the same price. Dell customer support had no trouble understanding this and talked with me. The HP rep was literally just telling me things I could find on the website I've called HP 3 times and I get a bad rep each one.
View 6 Replies View Relatedi need sevice manual for Hp nx6125.
Driver recovery cd user guides instruction service fix and repair just about anything using this website!
<H1>laptop hp compaq nx6125 service manual
</H1>
Driver recovery cd user guides instruction service fix and repair just about anything using this website!
<H1>laptop hp compaq nx6125 service manual
</H1>
where I can check the status of the service plan I bought with the HP? I have the receipt, I sent in the card, but I can't find any place to check it online.
View 10 Replies View RelatedI wanted to share my recent experience with HP and to serve as a warning for anyone else planning on checking out the hp envy 15. I was one of the first to buy the envy from the day it was launched back in fall of last year, but had to return it due to a bad gpu. That was fine and the return went alright, and I ordered the 2nd gen one the day it was announced as well and I got it with the new core i5 processor and matte screen. The laptop was delayed in its delivery like many of the other members here and I got it around the beginning of February (so about a 1 month delay). Of course HP had no problem in charging me within hours of me placing the order and 1 month out from when I would actually receive it due to their own delays.
Since then it had been running just fine for the most part, with just a lot of heat build-up when playing any sort of game. Eventually however there seems to have been some longer-term repercussions due to the heat, namely that the edges started to expand out and peel away from the case. This led to the edges starting to chip off (I'm talking about the bright silver plastic edge that outlines the laptop). I published an early review for the envy 15 for the first gen model in case you wanted pictures of the palmrest edges. I could clearly see in at least one corner that due to heat build-up it seemed as though the adhesive that was holding the plastic edge to the main case was getting loose and as a result of the plastic was bulging out........
I have got Notebook Compaq Presario.. I cant connect to the internet using the wireless connection.. the reason is that i accidentally did some operations, and cannot switch on the light on the front panel of the notebook.. it does not work, i mean the light of the wireless connection button does not light.... I turned off something...
View 8 Replies View RelatedI got an HP Envy 15 recently with the Bing CB deal on the day it was released; but have found that an SSD on that machine would probably be necessary for my needs. I posted some questions in the owners' lounge, but haven't since gotten any response, so I assume that people there may not know the answers. So I want to see if people in the broader HP forum would be familiar with these things.
When I purchased this machine, HDD was the only option, and the HDD is not listed as a user serviceable component. But in the last couple of days, the SSD option is up on the HP website; so I can see several options that maybe available to me, depending on HP policies. Is anyone here familiar with HP policies regarding:
1) Returns of products, does the 21 days mean 21 days from purchase, or 21 days from the time that I receive the product?
2) Returns of products that was purchased with warranty? I did purchase with the 3 year accidental; but I have not activated the service with the machine yet.
3) Exchange of products, how easily could it be done through HP, for the same machine of a different configuration?
4) Bing cash back, would it still be valid if I decided to exchange it for the same machine of a different configuration?
5) Since the HDD doesn't seem to be a consumer serviceable part, would it endanger the warranty if I changed out the drive myself? Or would they even care about that?
6) How easily can HP parts such as the 1.8" brackets be obtainable from HP, some time in the next few months; based on experiences with HP products in the past.
I guess depending on the answers to these questions, I would have the option of A) returning and buying anew; B) exchange for another configuration through HP; C) change out the HDD myself with a 2.5" and just forget about it; D) wait until the appropriate parts are available, then change it out with two 1.8" drives.
I would like to keep the BCB; but if there is no other way of getting an SSD into that machine, then I might just have to let that go, and try to find some lesser discount to work with.
So I got my DV5t in January. I sent it in to Zagg immediately after receipt to have an InvisibleShield put on it. As soon as I started using the notebook I was having trouble with the integrated TV tuner I/O port not making a proper connection (I would have to prop the cable up with something.) After about a week and a half the port completely failed.
So, I call tech support and spend 2 hours on the phone with some person in India while they try to understand what I'm trying to tell them. They took control of my computer a couple of times to remove/reinstall the drivers. After which she opened up WMC and went to "Internet TV" and tried to tell me that the tuner was working properly. So after we got that SNAFU worked out and the problem clearly explained (1.5 hours into the call) she tried to get me to approve the sending of a replacement antenna saying that it was the problem. I explained to her that I had tested both the antenna and the CATV connector and they were both doing exactly the same thing. Eventually I get a repair ticket and send the notebook in to get repaired. Well they replaced my wireless card instead of my TV tuner and sent it back to me. The repair note said that the wireless card had been flagged on a diagnostic. I don't know if the person at the TN repair center couldn't read or what because my customer repair request form (the one I fill out) stated that my problem was with the TV tuner. So I call tech support again and after an hour I get another repair ticket and send it in. Now they are trying to charge me $296 to repair the TV tuner claiming it was "customer induced damage." That's more than a third of the price of what I paid for the computer.
The reason I say don't get the integrated TV tuner is because if HP is going to view any problems with the the tuner port as "customer induced damage" then they are going to try to get you to foot the bill. In my opinion if you want a tuner just get an aftermarket (HP or other).
i have a v3019us and it will not log into windows. It goes to login screen, enter password, then it says its loading settings but flashes straight to logging off and goes back to the login screen. it has xp home edition, and does the same thing in safe mode. tried restore disks but pc is telling me restore discs are for wrong model.
View 4 Replies View RelatedMy ancient C500 fan is noisy, a constant slight grindy noise. Its been like this for months and I cant take it anymore. Can I clean or replace it w/o too much trouble or is it time for a new laptop? Looks like I'd have to take off the whole bottom to get at it...which Iwill do, if it will shut the damn thing up.
View 4 Replies View RelatedMy LCD is like this when it's opened less than 90 degrees.
My LCD is like this when it's opened greater than 90 degrees.
I'm forced to use this computer in awkward position since i can't open the lid greater than 90 degrees
i have a compaq presario 1500 with a pentium 4 running XP SP3 on it. I am having trouble with keeping it under a good heat, the fan is constantly running high! i know this needs a good clean but the screws to remove the back casing are so small for me to do this! any suggestions of how i can clean inside? or get to th fan through the top by the keyboard?
secondly it tends to crash every now and then, maybe when it overclocks on the cpu?? i am recently trying out a program called speedswitchXP which seems to be slowing it down to an extent! but not solving the issue.
thirdly and finally, my battery only holds charge for around 10 minutes before needing constant wall plugin! i constantly have it plugged into the wall, could this be a result to any of my problems?
got a Presario V2000 that will not boot whatsoever.
Upon pressing the power button, the machine starts up and displays the standard "Windows could not start properly" screen. Every option I choose, from the three Safe mode options, to the Last Known Good Config, to Start Windows Normally will not work.
I choose an option and everything goes smoothly, the Windows XP splash screen pops up & stays there for a few seconds, then goes blanks for a slightly longer length of time before a blue screen pops up. I can't remember the first few numbers, but the rest I'm pretty sure is accurate:
(a series of letters/numbers is here) (Registry File Failure)
The registry cannot load the file
SysCommandSysCom32ConfigSOFTware
or its log or alternate
It is corrupt, (something I cant remember), or not writable
Beginning dump of physical memory
Physical memory dump complete
Contact your system administrator or technical assistance.
.....and it pretty much repeats over and over in a continuous cycle like this until I power it off.
What I'm wondering is where exactly the problem lies? On the Hard Drive--where the drive itself needs to be replaced or the OS just wiped and reinstalled fresh.......or is this indicative of a hardware failure...which would mean this lappy is pretty much dead?
On pressing start button, laptop starts, but blank screen comes. After every few seconds, it keeps on rebooting, but nothing happens.
I have tried pressing F10 and Esc button on startup, but nothing happens.
Moving finger over multimedia touch buttons causes them to beep.
Few times, it shows the BIOS, but does not detect the hard-drive.
Very rarely, everything works fine and OS boots and works fine (without any sign of problem).
I replaced RAMs, hard-drive and DVD Reader in other laptop and there they worked absolutely fine.
I even tried removing the battery, connecting external monitor, keyboard, but nothing worked.
BIOS version is F.3D.
When opened, CPU fan and heatsink were dustfree.
Product Specs: HP Presario V6305NR, 1.6 GHz AMD Turion™ 64 X2 Dual-Core Mobile Technology TL-50, 1024MB DDR2 System Memory (2 Dimm), NVIDIA GeForce Go 6150 (UMA)
I have a Presario V2000.
After not using for about 1 week I turned it on so I could clean it from viruses.
Got the battery alert and then it shutdown meanwhile I was pluging the cord in (Targus AC cord with
blue light).
When I connected the AC to the power (not connected yet to the laptop) it "turned on" and still today
shows a blue light. But once I plug it to the laptop the blue light disappears after 3-5 seconds!
Not at the beginning nor the end of this process the laptop will turn on if I press the power button
for 'x' seconds. If I plug the cord, the computer doesn't show any "power light" and then the blue
light from the Targus AC fades off.................
I have a Compaq presario C500 laptop by HP....
When I bought this computer these are the specs:
***Processor: 1.6 GHz
***RAM: 512 Mb
***Video: Up to 64 Mb Shared...
***Battery: 6 cell Lithium battery...
***Hard Drive: 80 Gb STANDARD
What I changed to:
***RAM: 2 x 1 Gb = 2 Gb total RAM...
***Hard Drive: 250 GB 7200 RPM.....
I am so much happier with this notebook than I was with my Presario C714NR.
Why;
Upgraded Intel GMA 4500M 768MB Max VRAM VS. 384MB on C700 GMA x3100
Upgraded support for 8GB Max Memory VS. 3GB with the C700 **Some G/CQ's can only handle 4GB
15.6" Screen not really a big deal from the 15.4" C700
HDMI Port VS. none on the C700
Media Card is standard in the G series.. VS. optional in C700 series.
Discrete Graphics offerings available for the G series and CQ-Series VS. integrated only C700
G/CQ offers shiny black top finish. C700 More grainy finish.
Better gaming performance, however, not really a gaming laptop.
HP has made some great improvements to the Compaq offering, however compaq will always lack some of the premium features like FingerPrint reader......
just yesterday i started having a bit of trouble with my screen. when I open it to a full position so it is at optimum tilt for viewing, the colors become slightly washed out and whites gain a blueish tinge, while blacks have this sort of red static/noise behind them. However, when i tilt the screen to a very acute angle, the colors return to normal. I think it might be a connection that got a little loosened- i dropped my laptop onto a car floor a few days ago while on a trip.
View 5 Replies View RelatedI have a Compaq Presario F500 with an AMD Turion64 2Ghz running Vista basic. what the maximum RAM it can take.
View 4 Replies View RelatedIs it Possible to add neew RAM cards To my Compaq Presario F700?
View 3 Replies View Relatedi have a Compaq Presario 2195us and i want to install windows 7 ultimate. is it capable of being installed or no? ive looked all over online and i havent found much.
View 3 Replies View Relatedif I opened the screen anymore than 4-5 inches, it would freeze half the screen and turn the over half into a complete jumbled mess. I ordered replacement screen about 2 months ago, and w/ me being lazy and all, it's been sitting on my office floor. I've been using the laptop daily, but instead it stays on my desk and is running through an Acer desktop monitor w/o any issues whatsoever.
So I brokedown and started installing the new screeen today, only to get this when I switched the output back over to the laptop:
It made an audible whining noise both times I switched over, so I quickly switched it off. At this point I'm wondering if the cable from the motherboard to the screen is the issue, but I don't wanna keep throwing parts at a computer this only cost me $250 brand new.
Also, when I finally get this figured out...I can't remember which plug this mic connector goes into.
It can either go here next to the keyboard cable or over here by the fan.
