I have a friend that bought a dv9000 from me but now he damaged the keyboard with his watch. A few of the (i dont know the name lol) things that hold the keyboard keys are broken. Anybody that lives near belgium and has some to spare or sell?
View 5 Replieswhen I was replacing my optical drive, I managed to tilt it upside down and several springs fell out. I have no clue where they came from specifically, other than knowing they have something to do with the sliding brackets on the sides.
I've searched frantically for a service manual on my optical drive to fix this problem, but I can't seem to find anything.
The drive in question is:
DVD±RW/R and CD-RW Double-Layer Combo Drive with LightScribe
Part number (from the dv9000 service manual):
432973-001
I know the DV9000 has problems. I've had the laptop for 3.5yrs and at the end of last yr it died on me. I tried to find out the problem and eventually figured it was the overheating and badly manufactured design as so many other people with this laptop found. Even took it in for a fault assessment and they told me that the integrated graphics card was probably fried.
Thing is, the other day I bought a screwdriver set and decided to open up the laptop and take a look around and boot it up again and now I'm having second thoughts.
Firstly, if it was the graphic card that was fried, surely the hdd would still boot into windows? When I turn on the laptop, the screen goes grey / lights up (as it normally did when the laptop was working) but nothing much happens after that. I dont hear the hdd booting up and nothing really happens. All I hear is the fan working and eventually after 20min of nothing happening I just pulled the power cable out.
So I tried taking out the hdd and booting up. Nothing comes up on the display and nothing happens. Even if the hdd is out, should any sort of display come up? like surely the BIOS or even a screen saying "no hdd detected" should come up?
If it is the graphics card that is fried, does that mean that if I plug a secondary monitor into the monitor port on the laptop, it shouldnt display anything should it? or does the extra monitor port on the laptop run through a different circuit system than the main LCD screen on the laptop?
My friend brought his laptop over and I'm trying to help him sort everything out. I think the problem might be due do a dying graphics card or bad memory.
Basically on the load up screen for Windows, there are groups of white dotted vertical lines spread evenly across the screen. This also happens when in CMOS. Everything seems fine on the desktop in safe mode, so I'm not sure whats wrong.
Here's an example... I used MS paint to make a picture to emulate the problem.
the lines go through the windows logo..
I was interested in getting another hard drive caddy for a 1545 but looking on Dell's website by model # they do not even list the 1545 per se.
They have a choice for "15" which I assume will include anything across the board for the 15 "family" models so I looked in there but no parts like this.
I tried ebay and googling around, found several places that sell spare Dell parts, even called & spoke to one but it seems to me that (a) Dell doesn't sell a part like this separately, and (b) places that do sell these kinds of parts are salvaging them from old/dead PCs and since the 1545 is a fairly new model spare parts haven't really surfaced for it yet.
Am curious if folks here know of any decent places to find this kind of thing though, since I certainly could be overlooking something!
I was going to be assembling an m1710 this weekend....
I called Dell Spare Parts a few days ago, and placed an order for the following;
HG345 Refurb bottom plastics, m1710
FF084 Refurb palmrest assy, m1710
J8841 Refurb speakers, LED, m1710
CF426 Refurb hinge cover, m1710
I've been watching the order on Dell's site all week, as it was scheduled to ship (on or before today) (2/21/08), and I opted for Next Day shipping.
When I placed the order, the woman I spoke with asked for my Service Tag number. I, um... don't HAVE one... I didn't say this, I simply said I don't have that information at the moment. She asked how I got the part numbers, and I told her from their own Spare Parts page.
Well....the order got cancelled today. Saw it online while at work, just before I left for the day. Another order number with the identical items was created, with a scheduled ship date of 3/3/08. WHAT?
The woman just called....she states they cannot process my order without a service tag number. YOU HAVE GOT TO BE KIDDING ME!
I told her I don't have a tag number....she asked if I was building one. "Yes." To which I hear...
"Oh....well, I don't think our supplier will allow that without a service tag number, because we reserve those parts for people who bought m1710's."
I said "That's amazing...because I know a number of people who have done the same thing I'm trying to do, and had no problems getting these parts."
"Well, that's because they have m1710's"
*mad enought to scream at this point* "Um, no...where do you think I got the idea from?? I'm certainly not the first person to have this idea."
how I can get them to sell me some refurbished plastics? What's the secret password?
Dell's parts people are idiots-1 hour on hold then "Ah yes...we have a Logitech wireless USB keyboard for only $54.99 and it will be compatible with your 1737"
I need to source the following parts:
Studio 1737:
Backlit Keyboard.(Found a refurb keyboard for $90..that can't be right)
Inspiron 9300:
Bluetooth card (Dell wanted $35)
New keyboard (Dell wanted $45)
Power jack(I will solder to the mb)
For a while now, my wireless has been cutting in and out and sometimes takes about a half hour to an hour to be able to connect again. Other laptops in the house connect to the same internet connection just fine. I met a girl last night who was saying how her internet wont connect anymore and she had the same laptop as me so I'm assuming its the computer and not the internet.
even before this issue though, the wireless networks window, when you click on the two computers to see the different connections, it always freezes to a white window to begin with and will take up til an hour to actually show the different connections.
This problem is incredibly annoying and i just want a solid internet connection without it cutting out .
Yesterday I bought HP Pavillion DV3z-1000 with AMD Athlon X2 QL-62 2000Mhz and ATI Radeon HD 3200.
It look very nice, but also have some problem - always working cooler. When you are not using strong applications, such as Video Playaer, Flash Video in browser etc., it's work fairly quiet, but if not... .
Is it here another customers of this model? Did you have this problem? RMClock does not support Athlon QL-62 so I can't decrease the voltage .
I bought a HP Pavilion dv5215us around August of 06...Doing some research I understand that electronics depreciate drastically and I'm curious to know how much it would've been worth now because it got stolen (in the hands of a technician) and now he is asking my opinion of a price/value for it.
View 4 Replies View RelatedI need some rubber feet and the LCD Rubbers too.
Technical support tells me to purchase the following..
Vince Dash : Hardware kit - Contains chassis rubber foot and Bluetooth module holder
Part number: 538346-001
Price: $44.65
Vince Dash : LCD panel front bezel assembly $67.45
PArt number: 576810-001
I think its outrageous to purchase these two packages for over 100.00 just to get some rubber 1x1inch pieces?
HP is sending me a replacement pc, and i'm sending this current one back. They told me I dont need to include the battery or AC adapter, the just the main unit. So my question is, what if i open this sucker up and take more free goodies? I owe them a good screwjob.
View 9 Replies View RelatedI actually have a Alienware but my baby has a Pavillion DV6 1100SO.
It's working ok, but it get so so hot! and for sure the fan are really hectics
There are something to do, one can of trick, fix or something? I'm going to buy her a fan dock, like antec, etc...
I'm thinking maybe to remove the cloth from the vento holes, the one that protect it from dust. I did it with my Alienware and it works.
i got an HP Pavillion Artist's Edition laptop (HP Pavillion dv2700) with a built-in webcam, running Vista. even more recently i decided to try to get a program i could use to record my desktop, just for fun. i tried a program called ManyCam (since it was free). however, it didn't seem to work with Youcam, and when i tried using Youcam, that wouldn't work either. ManyCam froze when i tried to select the webcam as the source, and Youcam simply showed a black screen where i should've been able to see myself. in the end i uninstalled Youcam (i also no longer have quickplay because i was sick of it starting every time i accidentally brushed the button).
after searching for a solution i tried downloading and installing a non-HP driver (Chicony--now the driver shows up as Acer Crystal Eye webcam). this didn't help any. i even tried a different program, Debut Video Capture Software. still no luck (when i select "device" as the source i just get a black screen). i've looked everywhere i could think for a solution but have yet to find one. any help would be greatly appreciated. just ask if any additional information is needed.
ok, here's what i did: i uninstalled the chicony driver, as well as ManyCam and the other program i had installed. i also got skype, on a friend's recommendation. i restarted my computer to install updates. the hp webcam driver seemed to be installed and running fine. skype detected my webcam. however i still got no picture, just a blank/black screen. even on msn. i found a torrent of youcam and installed it, but it keeps telling me there's no video device detected. my webcam is turning on, but beyond that it's still not working.
I have my fathers old hp laptop and i don't know what's going on..
The laptop seems to be in excellent condition but it starts with a beep in the bios and i can't see anything at all in the screen..
HP Pavillion DV9500t got damaged when i was playing game 3 months ago. the Main problem for the hp is Graphic card gone and the motherboard might not work either. the pc had been sent for repair once 7 months ago due to the blackscreen (LCD screen with no background light) and this happened just before the end of the 1 year Warranty.
I bought it at end of June 2007.
currently, i dont know if i still possible to get it repair without pay anything.
Im stuck between getting an acer 1810tz or the DM1, the DM1 is actually a bit better with its DDR3 and bluetooth, its possible i can get it for cheaper as well.
However the inspiron 11z looks great too but the reviews say that sucks with its horrible touchpad and only 1 ram slot etc, i cant find any reviews of the DM1 anywhere, is it a good laptop? Better than the 1810tz?
I have an HP Pavillion DV9700 that for some reason will shut itself down for no reason and reboot, sometimes it may run for 2-3 minutes and sometimes 20 minutes but it doesnt give you any error except on bootup it has the windows wasnt shutdown properly. Sad but Funny I have an HP ZE4325US and it started doing the same thing last year, what the crap is the chance of buying two HP's and both end up with the same issue? Checked everything and my only thought now is the MB,
View 3 Replies View RelatedI am about to install Win 7 for a buddy but cannot seem to find any drivers for it on HP's site?
View 9 Replies View RelatedThe envy line is supposed to be the performance line isnt it? what makes the customizable pavillions worse than the envy 14 in terms of performance? I was just wondering because i was debating which laptop to get. Also, when are all the newer pavillions going to be released?
View 3 Replies View RelatedI'm having a a VERY hard time getting my sister's DV6 to connect to our router.
I've updated the wifi driver, and the firmware on my ASUS WL-520 GU.
I can see the network, but I won't let me connect. Running WPA-Auto-Personal.
Now, I've heard that Vista has issues with WPA, but my dell connects fine without any issues.
If I plug the laptop into the router with an ethernet cable, I can connect wirelessly to the router. If I then unplug from the router, the wireless with work for a couple minutes, and then kick me off.
I am using a HP Pavillion 9810us laptop. I have never had a problem with Itunes. Now I am having all sorts of problems. When I installed Itunes on a clean install of Windows Vista 32bit, It seemed like Itunes corrupted the sound card driver.
As I am not getting anywhere with Apple Support and HP
I am working on salvaging a family member's Pavillion DV2500 from a nasty spill. She spilled some soda all over the laptop and it obviously caused some issues.
I was able to get it all cleaned up and back to normal working order with the exception of the keyboard. When I use the keyboard a single keypress will result in multiple keypresses registering. For example: When I press the '1' key, it actually inputs '21'. This only happens for keys on the left side of the keyboard.
I know the first response will be, replace the keyboard. Well I did. Twice. Each new keyboard has the same response.
Has anyone had similar experience? I have tried cleaning up the connection on the motherboard for the keyboard the best I can and still nothing.
I want to ask if there is anything else I can do with the laptop to get a better performance rating.
I've added more memory, from 2 GB to 3 GB, bigger and faster HDD 320 GB @7200 rpm.
Attached are the specs for the laptop.
I can't/not sure how to attach the screenshots of the specs/ I tried the "copy' "paste" and that didn't work.
I talked to the guy who repaired my laptop about what brands he thought lasted the longest and needed the least repairs (he's been fixing computers all his life pretty much). And he said hp/compaq were the best.
View 8 Replies View RelatedWhere can I purchase replacement parts for the dv5t motherboard without spending an arm or a leg. I spilled coffee on the and now it's pretty much toast. It won't even start up.
View 10 Replies View Relatedmy mom has a HP Pavillion dv6000 made for being mobile and having some gaming capability anyway she's had it for year and half well long story short its alwas been kinda slow and I ran some tests on it because I'm thinking about buying it from her and the processor AMD Turion 64 X2 TL-58 @ 1.90GHz is like locked at 803.9MHz won't go past it I ran OCCT for an hour and it never went over 803.9MHz and never went under 803.7Mhz any idea what the problem could be?. I know she didn't do anything to it, all she does is go on Facebook.com and play FarmTown >_>
The Specs are:
Processor: AMD Turion 64 X2 TL-58 @ 1.90GHz
Graphics Card: Nvidia GeForce 8400M GS
RAM: 2GB Major Brand Memory
thats all I know about it :/
CPU-Z
how good is that graphics card? I've never heard of it before -_-
if I could replace my HDD (120Gb SATA) Pavillion 6704nr with a Hitachi 320 Gb, 7200 rpm drive. Also how would I transfer the system and files to the new drive.
View 4 Replies View Relatedmy 2 brothers were playing warcraft 3 together one on the desktop the other on the laptop. after playing a long game they shut it down for the night. the next day my brother went to start up the laptop and nothing happened. for some reason it simply will not start up. the battery is not dead and he has tried starting it while plugged in.
View 10 Replies View RelatedWhen I power on my laptop, blue dots or blue lines appears on the screen. As soon windows vista boot screen comes, a multi color screen appears and it stays there until i restart. I have did all the troubleshooting such as memory modules replacement, factory restore, system recovery etc. but couldnt able to solve the issue.
When I go into safemode and remove the nvidia drivers, system starts working in 16bit color mode. I have installed several graphic drivers but then again multi color screen appears on windows boot screen.
As per my local repair shop, its an issue with integreated graphic chip and he can fix it by replacing it with another graphic chip. therefore no need to replace the board.
Is it possible to replace the chip?