i have on my HP TX2000 laptop is that the wifi switch stays in the amber color , and no matter how much i play with the switch , doesn't change . i tried to initiate the " diagnose & repair " on it , but it keeps saying that a " plug is disconnected ".
View 8 Repliessomehow the wifi switch on my hp dv2000 broke. i dont know how it happened, but it doesnt matter now as i cant use the internet because it is in off mode. i tried enabling it on device manager, but with no luck since i think its because it is still in the off position, and w/o the switch itself i cant manually switch back to the on posistion... anyone know how i can replace the switch? is it sold by hp, ebay, online retailer? is it an easy fix? and most importantly is it expensive? some crappy pics taken from my phone show the problem...
View 4 Replies View RelatedMy mom's HP dv6000 will not connect to any wireless networks. I thought the network adapter might be fried but last night for no reason after weeks or months of not working the light for the wireless switch was on and turned blue. Wifi card worked flawlessly until I left it off the charger for a few hours and it turned off. Upon rebooting its again broken. The wireless switch indicator led stays red in both the on and off poisition.
View 6 Replies View RelatedI have an SR290 and recently I had a problem with the wireless. The wireless switch at the bottom left corner does not seem to work; when I move it to the ON position, the LED does not light up green to say that it is working. In the Device Manager, the wireless device does show up, and I can disable/enable it, and it indicates that the wireless card is still functioning. Under network connections, the network connection does show up, but it cannot detect any wireless networks. My other devices can pick up the wireless signals.
View 5 Replies View RelatedMy girlfriends tx2000 is always running with the fan on high so I decided to check out the temps, they were in the 90s and she was just browsing the web! I took it apart cleaned all the dust and it still does this. I know it's a small laptop so it will be harder to cool but it shouldn't be this high!
View 10 Replies View RelatedI have a Lenovo t420s with dualboot win7 and Ubuntu. I never had any problems until now and could switch on/off my wireless and bluetooth connections via the Hardware Switch (right bottom left of the notebook) or via FN + F5.
However, without any specific reason the wireless and bluetooth was switched off and the the system tells me that I have to switch on WIFI via the Wireless Radio Switch. However, although I can move it, it doesn't make any difference for the Switch.
I tried to reset the BIOS to Default and changed the network settings, and also rebooted several times. I won't work with any of the two systems.
I have an HP Pavilion tx2000...
About a week ago I had to do a full restore from the restoration discs HP had sent me, something was causing Windows Explorer to be incredibly unstable and I couldnt even make a set of backup discs...
BUT thats not the problem, after the installation, I realized that my laptop no longer detects the built it fingerprint reader and memory card slots... I figured, ok maybe I just need to go back and manually install the drivers... So I did from the HP website and still nothing worked... So I contacted HP support and naturally they gave me the links to the exact same pages I got the drivers off of, then they had me update my BIOS... still nothing... then they had me reinstall my fingerprint reader software... Still nothing... So then they told me to just send it into them under warrenty to have it fixed, except I'm a full time student and I depend on my laptop.
After almost 7 services by the *always gentle* Dell techs, im getting a new problem, my WIFI reception is just crud, being right next to my router i get 4 bars... and if i get a little farther apart it will loose signal and oscillate between 3 bars and 1 bar, and sometimes even disconnect all of a sudden on places i always had good signal, and reconnecting will fail a couple of times before its successfully connects. ( ive tried this with several different routers, and the same happens )
is it possible that my WIFI antennas were damaged? or could it also be my wireless card? ( intel N 4950 )
i have already checked where the 3 antennas connect to the card and they seem ok.
I have a Pavilion G6 - 1261sa running on windows 7, 64-bit. I cannot switch on my wifi and change the orange light. ive searched solutions for this, and most seem to be solved by installing drivers for the wifi card. and most seem to be solved by going into Device Manager / network adapters... and so on. But as I get to this stage my laptops device manager does not recognise a wifi card as being there!? I can only connect using ethernet....
View 9 Replies View RelatedI've just added an m-sata drive and installed my windows 8.1 there.After that i can't switch my wifi on!The option is grey and i can't switch it on!
I've tried:
1.re-istalling the wifi driver, nothing happend,
2.install an older version (6.0.2) of energy management, nothing happend
3.putting back my old drive (with my previously working fine windows), nothing changed
4. bios reset, and again nothing happend!
The option for wireless is enabled in bios.
I installed the latest dell connnection manager, but the wifi-catcher switch is still not functional. Has dell abandoned this feature or am i missing something?
View 5 Replies View Relatedi Bought a dell precision m4800 it came it windows 8 i updated it and now my wifi switch is not working it does'nt turmn off and now i can't turn the bluetooth on as well, it says that you need to turn on the wireless hardware but it is already on
View 1 Replies View RelatedI have problem a with my Switch 10. The internet connection drops frequently. It is followed by the signal strength icon showing 'Limited'. I then turn off WI-FI and turn back on and it does not recognize any networks at all. I then go into network settings, run the troubleshooter and it does its stuff, re-setting the network adapter, and then informs me that it could not find an issue. After resetting the adapter it works fine again.I have tried uninstalling and installing latest drivers but the problem persists. The problem lies within the adapter itself or the driver.
My adapter shows as being REALTEK and i read on here of similar problems with the Broadcom adapter, which makes me think that the driver is causing the problem. Someone suggested that the Bluetooth was causing a conflict, so I removed bluetooth and it made no difference. (I have re-installed bluetooth. All drivers are latest ones.My switch is not a month old yet and this happens a couple of times a day. and am close to returning the product. I like it, but cannot put up with such an important issue as the internet randomly dropping.
I just bought this today and it will not connect to my WIFI. I have Netgear WNDR 4500 router. It does not see the home network.
View 2 Replies View RelatedAnother on my growing list of unwelcome "features" of this machine...
Around 20 seconds after logging in after a full reboot my Wi-Fi connection is dropped (having already connected during the boot/login).
I'm using the Intel software to manage the Wi-Fi connection and it says it can't connect because the hardware switch is set to off. This is obviously untrue.
Only solution I've found is to manually flick the hardware switch to OFF and then back to ON, then it automatically connects.
Seems like a BIOS issue if it's suddenly turning the adapter off for no reason. I'm already on the latest A07. Problem does not occur when hibernating and resuming from hibernation.
I previously let Windows manage the Wi-Fi connection but it never automatically connected at all, hence the switch to the Intel utility.
I manage to pair my 2-in-1 pc Acer Switch 10 with an externat Bluetooth (bt) device only when the tablet is connected to my home wifi network. As soon as I disconnect from the wifi network, the pairing with the bt device is disabled. If I try to pair the bt device when wifi connection is off, the pairing succeeds just for a few seconds (1 or 2) and then it disconnects.
The support assistance of the bt device, since it actually manages to pair with the pc in such wifi wird conditions, suggested that it probably can be a problem due to the chip of the pc that probably manages both the wifi and the bt connections and is not able to manage them separately.
[URL]
and updating the bt driver downloaded from the ACER Drivers and Manuals webpage. However, the installation procedure were interrupted as the installed bt driver appears to be "later".
My Pavilion tx2000 doesn't open when i turn it on. And when I try system recovery options, it says that my password is incorrect and that it has been disbled.
View 5 Replies View RelatedIt seems my VGN-Z21WN wifi module is dead. Whenever I put the wireless switch on "ON", the led never lit up
Is this known issue ? Is there something I could try before sending it to Sony support center ?
I have a compaq V5000 laptop. My granddaughter borowed it over the weekend and she brought it back with the USB port broken on it. it has 2 ports one on top of the other and the center seperator is broken, it can not be used anymore. so My question is will this work so I can have USB? 4 Port USB 2.0 To ExpressCard Express Card 34/54 I saw it on ebay and It look's like just what I need. here is the link [url]
View 4 Replies View RelatedI have a DV9000, 17inch. A number (that I think is significant) 439112-001 is on the bottom of the laptop.
I need to buy a refurbished/spare part motherboard to replace the one that died in my other computer, but I can't figure out which one to buy. At first I thought it was as simple as buying a used DV9000 laptop or motherboard, but apparently not only does the screen size (13 vs 19 inch) matter, but also a number.
I see numbers on ebay with stuff like "447983-001"--that's why I thought that one number on the bottom of mine was important. But I can't find that number on any motherboard on ebay, and it only turns up 300 pages on google, which leads me to believe it isn't the right number.
how to start up this laptop so it will bring up an external monitor so I can transfer my data to another machine?
View 3 Replies View RelatedThe LCD on my DV2000 broke last month and since I dont have the money to replaced right away I decided to use it with my 17" lcd monitor for the mean time. After a few days of using it with the external monitor one day I turn it on and got nothing on my external monitor. Since then I having trying to figure out why I am not getting video signal through my VGA or s video.
Now I am afraid there is something worst than just the broken lcd so I am trying to see if there any way I can test it or find out if it still works before I get the replacement LCD. I at least know the there is signal going to the broken lcd since when it turns on the screens light up and turns white.
Is it possible to use a different size lcd from another hp? I have 15.4 lcd from my sister's old compaq will the dv2000 mother board run a bigger screen or will it kill the motherboard?
If you have an Phoenix BIOS (there should be a small logo at the right lower corner..)
And with a broken/desoldered/loose GPU (black screen with blue bars)
Can you press Help Win+B (or ctrl-b, alt-b) then turn on the laptop. Does it make beeps?, if you put in a USB floppy disk, with a disk inside, does it try to read it?
If so it might be possible to rewrite the BIOS so that it will initialize the "Vidock/hwtools.net" pci-express adapter FIRST.
Just like how in BIOS you can "set it" (via setup) to initialize the AGP or PCI video card FIRST, or PCI-E or PCI video card FIRST.
I recently took my Compaq Presario C714NR laptop on a road trip, and one day some water spilled on the case without me realizing it, so that the case and laptop were wet when I got to my hotel room. The screen no longer illuminates - I can just barely see the proper windows and images on the screen if there is bright light in the room, but it's nearly invisible. I assume that either the backlight is dead or that a wire/connection to the backlight is loose or shorted.
Several months ago I had to replace the screen when the laptop was dropped and the screen broken (bought a new replace ment screen through eBay, replaced it myself), so the screen has had a bit of a hard life.
Broken left hinge is a known problem in HP Pavilion dv9000/dv9100/dv9200/dv9400 notebooks.
HP was fixing this issue at no charge but not anymore. The warranty program has expired on May 31, 2009.
I just finished step-by-step repair instructions.
Check it our here: How to replace broken left hinge in HP Pavilion dv9000
Make sure to use correct hinges. They are different for LCDs with single lamp and LCDs with dual lamp.
my laptop's lcd screen died 1 month after guarantee expiry. Since original LCD replacement screens are crazy expensive, I bought physically compatible lcd screen, that supports same resolution.
But I cannot get any higher resolution as 1024x768 (I've used 1400x1050 on original). I suspect there is a problem with drivers - my screen is recognized as plug and play monitor, but settings won't offer me any higher screen resolution.
I have the issue of backlight not turning on on my NC6400. My guess is that the lid switch is faulty. But I can't figure out where the switch is located.
When I boot up, the screen flashes on for a second before the backlight turns off. With a bright light, I can still see the HP logo during boot up and the computer continue to boot into windows just fine. If I set the lid to the angle in which the computer lid is closed/open (the hdd indicator light changes color), sometimes I could get an instant of backlight.
I think the lid switch is stuck or broken, but I can't find it on the outside. Anyone know where the switch is? I'd also be happy with just letting the screen be on all the time if it comes to that.
how I can switch off the monitor only (i.e. the LCD screen only and not the whole comp) on the DV51015TX laptop?
View 5 Replies View Relatedive got a hp nw8440 that needs a switch cover,but talking to hp and spare parts warehouse they no longer make this item,.need cover and led board and led board cable
View 5 Replies View RelatedI'm fixing a DV6000 for a friend, basically the wireless switch is disabling the wireless even when it's switched to the on position. I remember reading about a registry hack that can disable the switch, but I can't find it now.
View 4 Replies View Related