Specs:
HP Dv2700
2 Tl-62's @ 2.1GHz
4gigs of Ram
64bit op system
NVIDIA GeForce 7150m/nForce 630m
Toshiba ATA 220gig HD (75 free gigs)
So I've had this problem for a while now and I cannot seem to get a fix for it. When I first bought my computer it was so fast. I would be able to run azerus, iTunes and Firefox with multiple tabs while watching HD videos on gametrailers with a perfectly good frame rate, and everything worked flawlessly.
However now I can hardly watch a video on youtube, the frame rate drops incredibly low and any video, unless is extremely low quality is hardly watchable. The fan is loud (which after reading a few threads found out was pretty common) and the laptop runs pretty hot. I've always ran Trend Micro AntiVirus (recommended from bestbuy) and even now there is no virus detected.
The real downer comes when I look at the task manager performance tab to try and figure out whats going on. I'll notice the processor speeds (on both) are very inconsistent and jump around. Also the physical memory never goes over 1.7gigs of usage. Even when the processor is running at 100% and I have multiple programs open it sort of peaks at 1.7 gigs. So right now I'm thinking that for some reason the laptop isn't accessing all of the available ram and is bottle necking the processor. HOWEVER, I ran Memory Test for 8 hour straight (overnight) and only then did the physical memory peak at 4gigs.
I have a spare PCI-e slot in my dv2700 (originally for evdo card) and I was wondering if its possible to get a mini-pcie ssd (like from a dell mini) and boot from that.
I am aware there won't be much speed increase, perhaps even a decrease but might be nice to be able to just use the hdd as secondary.
My hard drive just failed on my pavilion dv2700. I was told I could upgrade from a 5400rpm drive to a 7200rpm. Is this true? And what hard drives do you recommend?
I have been reading the threads related to HP notebooks with defective nVidia GPUs and just out of curiosity, I checked the 8400M GS GPU in my roommate's HP dv2700 notebook, which normally runs @ 80 - 90 deg C, using GPU-z software. The sensor data matched the default core / memory clock for 8400M GS, when under stress. But I got confused when I saw that the shader tab is disabled .
I do not know if somebody else has already come across this situation. I searched here and could not find a similar reported problem, hence this thread. Am I missing something here or is there someone out there having the same problem. Can it be something related to an older ForceWare version (156.65)?
How can I get the exact resolution of 1360x768 (720p) in my HP dv2700 using the HDMI cabel? I currently have the 179.48 drivers installed and I couldnt figure a way to get a 1360x768 !? I tried using customs resolution but it wont work, the TV (samsung) keeps giving me a 1920x1080 which is not the native resolution.
I also own a desktop with an Nvidia 8800gt graphics card and it recognizes the 1360x768 resolution immediately, I dont why this is happening since both the laptop and desktop use similar drivers?
Is there a way to reduce the amout of RAM allocated for video card?I don't play games so only 16-32Mb should be more than enough. I have 4Gb of RAM and only 2.99 are available. I know that for a 32bit OS only 3.4-3.6Gb are available.
I upgrade my system to windows 8, and erase all programs and files, incluing software, actually my computer seen working perfect but when open tool manager, show me that the coprocessor isn't working because the driver inst installed, seen code 28, the manufactured seen unknown and the ubication is bus PCI o, disposition 1, function 3. i cant upgrade the driver because i cant find int the web the name of the manufacturer.
Information of my laptop: SySTEM windows 8 pro 64 bits HP pavilion dv2700 Notebook PC BIOS PhoenixBios 4.0 Realese 6.1 procesador AMD Turion TM 65x2 tl-60 2 cpu 2 ghz directx 11 SCREEN NVIDIA GeForce 7150- nForce 630m chip Geforce 7150M Nforce 630M DAC. integrateed RAMDAC MOnitor PnP Generico controlador principal nvd3dum,nvdedumx.dll version 7.15.11.7948
I use Hp dv2700 laptop (windows vista). My laptop display got split into 6 mini screens after I recover it. Please see the jpeg image: [URL] ..... I did try to update the Bios but it's not success.
I have Compaq Presario CQ42-273TU NBPC. In my laptop , if i play video , it becomes very slow. After video becomes slow, everything else on the laptop becomes slow. recently i gave laptop for service also, then also i have issue with video.
I recently got my HDX 16, however since a few days ago it has been charging extremely slowly. Ie. If I plug in in the early afternoon, it will take until night time for it to finally reach 100%.
I just bought a Sandisk 8GB USB 2.0 memory stick. I'm transfering 4.7 GB worth of music and its taking 25 minutes? There is no way USB 2.0 is that slow, should take close to 2 minutes.
I checked system settings and all drivers seem installed correctly.
it has 1 gig of ram and has a amd turion x2 tl-53 proc, yet it is so slow, i have another laptop which is a hp 6720s with an intel celeron 530 1.73ghz single core and that is miles faster than this dv? also has 1 gig of ram both running windows 7 beta. little update, when i first turn the laptop on and wait for everything to load up i then click firefox and this takes 28 seconds to open up, surely there is something wrong here, aquamark3 shows around 2000 for the amd cpu and around 7000 for the celeron.
when i first got it, right out of the box without messing with services or changing anything, startup was around 40seconds. i could crysis on super high at about 27fps.
Now, i installed GTA4, which is the only other thing i did after crysising, no messing with services or installing other stuff, and my startup = about 1min, even though i take out the rockstar social club from startup.
I got really ticked off, so i reinstalled vista. complete format, everything. didn't mess with services or startup or anything, just let it run on its own. my startup is now 1min 45 seconds! and i can only crysis on medium at 23fps.....which really sucks.
does anybody have any ideas why? I have posted this question in yahoo answers and i get all sorts of people who don't read and tell me to disable this service, disable stuff in my startup....i have the exact same number of startup items and services running on those 3 scenarios.....
my HP dv4 1222. It's been like this since i got it like 4-6 months ago. Whenever there's a lot of flash going on, be it a flash game or a full screen youtube,hulu video etc, the computer skips frames and gets real choppy. I know these are all flash based, and wondered if the computer is just a POS cuz the amd processor cant handle flash well. It's a Turion x2 2.1 ghz with 4gb RAM, and the radeon hd3200 graphics, so i dunno what the heck is wrong with it.
I have a dv1000t HP Pavilion with XP home edition.
I have been trying to download Windows compatibility pak so Office 2003 can read office 2007 documents.
I had no problems download it on my z70va ASUS. It downloaded in just a few minutes.
But on the HP -- the download is taking over an hour.
When this first happened, I though there was some malware on it. I run AVG Internet security all the time. But just to be on the safe side I downloaded Spybot Search and Destroy and checked with that -- nothing (though I did have it delete all my temporary files, Super AntiSPyware, nothing, Malwarebytes AntiMalware -- it found one registry infection Hijack.start. From what I read elsewhere that's a false positive but I deleted it anyway.
I also installed SP3 on the HP a few days before all this.
My internet is a high speed DSL and both the HP and the ASUS are on it. SO I don't think that is the explanation.
It seems a little bit like even IE is loading slightly slow -- but I am not sure if that is my imagination.
I had receive an old one compaq laptop evo n800c from my father, but I have a problem with this laptop. only for booting (cold or hot booting) it takes about 6 minute stuck in compaq logo in the beginning
I had enabled quick boot option in BIOS but it seem doesn't work because the time needed for booting does not change, such as before a quick boot is enabled
I have an hp l2005co (lance armstrong edition) that has started to go extremely slow. I tried formatting and even downgrading to xp. The xp installation took 6 yes 6 hours. I ram memtest86 and it found zero errors. I also replaced the hd with a new one and I got the same thing. I got an application that tells me the temperatures and idle they would hover at around 60 degrees celsius. I took the computer apart and took the terrible little cushion off the heatsink and applied some thermal grease and now it idles at around 48 degrees celsius. Even after I did that, it's still running excruciatingly slow. Startup times increased drastically though.
My hp hdx16 is less responsive and fast as 1 year old Samsung with less specification and brutal usage! how is this possible? how do I diagnose the problem?
My battery died a few months ago on my nc8430. It's not an oem batter, but was a third the price. When running on the battery power, the computer is very slow. I have to have NHC on MAX Performance to watch youtube @ low res, or even type without lag. Even with this there is lag on the system. With NHC set to Max Battery, the computer is nearly unusable. Now I've been using the computer for a while, at Max Battery, and AC power, with now problems. And if i plug in the power cable, but change nothing, the system runs at normal speed.
Can a battery cause this type of behavior? Should I return it?
my elitebook 8530w seems to boot up slow w/ 64 bit vista. i did a clean install and installed the drivers. Ex. it will say "please wait" for 20 seconds before going to the "welcome" screen. after "welcome" comes up..it does boot to the desktop very fast and is ready to go though. what is causing vista to hang like this at the welcome screen?
My specs 8GB(4gb x 2) ddr2-667mhz memory qx9300 quad core processor- this thing is a beast! vista x64
i'm not exactly sure what might be causing this because it was working just fine (except for my screen issue) before the disassembly
also it seems to run a little bit better in safe mode but its still slow
after playing with it for a while its main problem is booting and programs are crashing. it takes about 10 minutes to fully boot and then it runs at a normal speed however programs keep crashing like crazy.
It first started when I was doing a light activity (word processing). What happened was both CPUs shot up to 100 percent and everything became horribly slow. Left/right Clicking on an item or the Start orb might take 30 seconds or longer before it would work. Task Manager showed 100 percent CPU usage under performances, but sorting by CPU processes, only 10-15 percent was being used.
I restarted, and to my surprise, instead of the nice under 1 minute load time to the desktop, to took at least 15 minutes where both CPUs were constantly at 100 percent. Safe mode was also very sluggish, where I stopped non-essential processes with msconfig. So I yanked my HDD and did a backup just so I wouldn't lose anything. After a few hours of the 8510p sitting, I put back the HDD and the machine worked perfectly for about an hour, then both CPUs shot up again to 100 percent. Once the issue happens, it occurs everytime I reboot regardless of how I boot into Windows. After being powered off for 4 or more hours (or overnight), It might work for an hour or so and then become horribly sluggish, or it might start out being sluggish, too. (BTW, no viruses)
So I got on the instant chat with HP support and told them about my issue. My tech had me switch out my 2 gigs of RAM with another laptop, but that didn't fix the loading issue. He said it needed to be sent in, so I received my box last Tuesday. On Wednesday, I got a call from HP saying my machine was fine and the only problem was my battery was dead and that would cost me 212 dollars (I don't know where they pulled that number, because a new battery on their website is 109). Great, the time it would actually work for an hour, it works perfectly there. I told them that I didn't need a new battery (I pretty much use it as a desktop at home), but that there was some other issue. She said she would email the "advanced" repair guys to look at my machine...
I have an HP Compaq nx7400. I've had it for over 3 years now. I've never changed its battery ever since I bought it.
Specs: [url]
Over the past few weeks, I've been having an unusual problem. Whenever I plug the AC adapter to my laptop, the whole laptop performance - from the second I switch it on - is very slow. The moment I pull the AC adapter from the laptop, it instantly operates at a normal and fast speed again!
I figured that it must have been a problem with the AC adapter (it's had its fair share of use - being swung around and dragged to lectures...). So I ordered another one off Ebay. Today, I got the new adapter and when I plugged it in, the laptop only went on AC power. It worked fine - fast as normal. However, it was not charging - just on AC power. I am starting to question if the adapter was really as "genuine" like it was advertised on eBay. But anyway... after about 4 hours with the new adapter on AC power, it stopped recognizing the battery altogether and alerted me with a Critical Battery sign. Of course, a few minutes later, it went dead on me - the laptop switched off. It was as if I removed the AC adapter myself, only I hadn't. Now, I am trying to plug it in again (the new one), to see if it will be able to power up again and it just won't respond at all.
On the other hand, when I put the old AC adapter, the laptop switches on but doesn't charge. Again, it is extremely slow with the adapter on, and fast when I pull the wire out. Only for a minute or so until it dies on me again...
I have a 28-month old HP DV2700 Special Edition (yes with the dreaded Nvidia Chip). It was working just fine until a week ago when i decided to clean the keyboard and all the keys. I had removed the battery so that laptop would not every time i touched the power button by mistake. After i was done cleaning i started up the laptop, the LCD powered up with a faint glow of the backlight, but no video. Normal HDD activity and laptop booted fine with sounds and everything. Tried booting several times with the same results. I also did that 45 sec holding power button trick, with no success. Based on the googling i did, i made a list of components the could fail and started ruling out one by one. Here is where i am at.
1. NVIDIA Chip soldering - Well i do get a display on the external monitor, shouldn't that be enough to rule this out? Still i opened up the laptop to get to the chip, pressed down a bit on it and nothing more.
2. Inverter & Backlight - Opened up the display assembly and could see the bright backlight. Even the screen brightness controls work and i can see the display go dark and bright, but no picture. From what i read the inverter has only to do with supplying the appropriate voltage to power the backlight and has nothing to do with the video feed.
3. Stuck display switch - Opened that up too, nothing stuck there. i can clearly see the screen going black once i press it and glow again when i release it.
4. LCD - Convinced that it was the LCD, got a replacement from eBay. Guess what? its same thing.
5. LCD flex cable - Don't really know how to test that.
I have an HP HDX 16 that has been giving me some trouble. The problem is that when I set the computer to Power Saver mode it slows to a crawl and I can't hardly move the mouse or type anything. This has happened to me ever since I moved to Windows 7 which is the official upgrade program from Arvato and HP. At first I thought it was a fluke but I previously had a clean install of Windows 7 with no bloat ware and it did the same thing. This has got to be some type of software issue becasue the laptop is rock solid otherwise and no crashing.
Also my remote stopped working after the upgrade. What specific driver update gets this going again?
when I wanted to buy a dell with a ssd drive my friend warned me and said that the old ssd's actually become slower than normal hard drives once they've been fully written.
So, my question is: does dell give the old ssd's or the new ones? They do seem rather cheap...
