HP/Compaq :: Hp Dv7t 17.3" Laptop, Glare- Only With The Infinity Widescreen Or All
Mar 23, 2009
We have a few of these laptops at our workplace.. in all cases i ordered them with the Infinity widescreen option..
I've noticed that on a black screen, there is alot of reflection/glare, compared to say the older zd8000 series..
I'm guessing when sitting outside with these, it could be quite hard to see.. unless they sell some kind of "hood" for laptops (?)...
Has anyone else noticed this..
Is it only with the infinity display.. is the default screen better.. anyone know what the difference is b/w standard and infinity.
View 4 Replies
ADVERTISEMENT
Mar 23, 2009
Has anyone been able to tell a difference between 5400 rpm and 7200?
I think awhile back i ran some benchmarks, there may have been a little bit of a jump between the two.. but i cant recall if in the real world it was that noticeable.
i took a look at some relative numbers, i think the performance mark diskmark for a 7200 rpm drive was around 388, while on the 5400 it was 255, thats a 35% jump if accurate.
Also, i'm not sure if 7200rpm would drain the battery quicker etc..
I had initially orded it with a single 320gb 5400 rpm, i was thinking of adding a 2nd (primary) 7200 rpm drive.
Also.. are these hp dv7ts using sataI or sataII drives?
View 6 Replies
View Related
Apr 11, 2009
a laptop cooler for the HP DV7t-2000 (17.3" widescreen, approx. important dimmensions 16.2"x10.9"). The laptop does not really get all that hot (except when I am playing games), but I just want to get a cooler so that I can keep the laptop in perfect condition. I want this laptop to stay in the best shape possible for as long as possible.
Right now, I have just been propping the back using some video game cases. But I want something that is a little bit more reliable and powerful.
When the notebook is in use, the vent is at the top left corner. When flipped over so that it is upside down (as is shown in the picture below), the vent is in the top right. Any suggestions that would fit this configuration (I hope it was clear, just wanted to be precise )?
View 4 Replies
View Related
Nov 18, 2009
I am getting a new hp laptop dv7t and in the past I have pretty much always kept my laptop in sleep mode when it was not in use. If I was going to not use it for a couple of days then I would turn it off. It is always plugged in since it is pretty much a desktop laptop.
What is the best practice for a always plugged in laptop?
View 6 Replies
View Related
Mar 22, 2009
I was about to cancel my original order, as I wanted to go for the bluray.. but in cancelling the order, it appears the 30+ percent coupon code i used has expired as of today.. so for now i'm holding off..
I've seen on the internet, the bluray player or one of them, i think, that this model uses..
I think its model UJ-120
Does anyone know if its possible to later on, swap the drives out.. doesnt this involve opening it up.. (void warranty?)...
View 12 Replies
View Related
Feb 4, 2010
If you buy a notebook from HP with this screen option, can one be assured that the physical LED panel is free of fingerprints, dust, lint etc before it was closed off with the "infinity" cover?
I've read some bad reviews about this design and a lot of people are complaining about dust, lint, etc somehow getting inside between the LED panel and the "infinity" panel. Also I've heard complaints about the keyboard scratching the "infinity" panel when the lid is closed (there is no space between the "infinity" panel and the keys apparently...
I'm not sure which to get, with or without "infinity?" I like the clean look the "infinity" gives but I don't like the regular screen bezel with regards to the webcam...instead of only seeing a small circle with a lense like you do with the "infinity" panel, you see the entire 'housing' of the webcam in the bezel...it looks kinda tacky to me. Also a lot of people have complained about the "infinity" displays being less vibrant, dull and washed out with HUGE glare issues.
View 13 Replies
View Related
Mar 26, 2009
I'm looking to buy an HDX16t. I have to buy refurbished due to funds, but there is a 90 day warranty so I can send it in if there's anything wrong (fingers crossed). However, there's a $50 difference between two models.The differences are 3GB vs 4GB memory, 250GB vs 320GB HDD, and then an interesting "16.0" WXGA High Definition Ultra-wide Flush Glass Display (1366×768)" vs "16" Diagonal High Definition HP Ultra Brightview Infinity Display (1366×768)". These descriptions come from the same website. Would I be correct in saying that HP never offered anything less than the Ultra Brightview Infinity display on their HDX16t models, and that these two monitors are the same?
View 10 Replies
View Related
Mar 6, 2010
purchase a HP DV7T labtop but i went to a bestbuy location around the house and was only able to view the brightview screen. My opinion on it was it looked nice but i was left wondering about the infinity upgrade.
View 9 Replies
View Related
Apr 3, 2009
I have a dv5t and as the weather gets nicer here in New England, I am opening the windows and this glare is driving me crazy. I searched the forum and saw a few questions about adding a film or something to prevent glare, but didn't see any suggestions. I'm sure others have been down this path?
View 3 Replies
View Related
Apr 9, 2009
The extreme glare of HP's Infinity displays and lesser glare of glossy screens in general has a cure: antiglare films, which also provide scratch protection. I found a very comprehensive review of the options here:
Screen Protector Shootout Results
Photodon LCD protector sheets were highly rated, and since Photodon is in my home state of Michigan I ordered from them. I went with a larger than normal custom cut for my HP dv4z's Infinity display, figuring (correctly) that I'd want the film to be a little larger than the LCD panel since there's no bezel. I got the width right, 310mm, but I guessed low on the height. 194mm should be about right. Being mechanically disinclined I did a poor job applying the film but it still looks good. Some pics:
Glare screen, no flash, creepy serial killer gloves from the Photodon installation kit
Glare screen, flash on
Photodon antiglare film, flash off
Photodon antiglare film, flash on
Photodon antiglare film, notebook on, flash off..................
View 4 Replies
View Related
Apr 19, 2009
i wanna configuration new dell laptop . i have 2 types of the screen .
1 - 13.3 inch WXGA Anti-Glare Display
2 - 13.3 inch UltraSharp™ WXGA LCD Display w/TrueLife
the price is the same , so which one is better ?? and why??
View 10 Replies
View Related
Dec 7, 2009
I have the option of upgrading to the Infinity display for $25 more. What is it and what are the pros and cons?
View 7 Replies
View Related
Oct 28, 2008
Anyone with this WUXGA (1920x1200) LCD, do you notice darker spots on the bottom left and right corners of the screen? Specifically over the Start button and the clock. Make sure there is a lighter screen in the background to notice it more distinctly. This is my second Samsung screen with this issue. Does LG make a WUXGA LCD?
Also, have any of you had the rubber bumpers for the LCD on the palm rest come off. My left one came off and will not stay on. What happens is you tend to run your hand over it while typing, causing it to snap off. In order to get a new rubber piece, DELL needed to send me a whole new palm rest with speakers and fingerprint reader included to install.
So far I like this Notebook, however it should have went through more tests (drivers especially) before releasing it to the public.
View 10 Replies
View Related
Feb 5, 2009
I have had my dv7 with infinity display for about 5 weeks. Purchased new.
It has dust behind the screen HP said it is not a warranty issue. I will not be taking no for an answer.
The laptop is new and in an environment that has little dust. If dust can get in it is a design fault, or a build quality issue.
I am very dissapointed at this point with HP service.
As well at the bottom left and right of the screen you can see scratch marks caused by the screen coming into contact with the speker grill on the keyboard pannel.
HP have said that they will warrant this, if the laptop has not been dropped.
It seems that the helpdesk people follow what are known as "advisaries" with regard to warranty isues. As they dont have one for the dust behind the Infinty screen they dont warrant it, or so they say.
If you have a dust issue you need to log a fault because it seems that warranty response depends on fault volume.
So if you have dust behind the screen log a fault and ask this issue to escalated.
I will be writing to HP and making as much noise as I can. If i knew that HP didnt care about dust getting behind the screen
View 5 Replies
View Related
Feb 5, 2009
I have had my dv7 with infinity display for about 5 weeks. Purchased new.
It has dust behind the screen HP said it is not a warranty issue. I will not be taking no for an answer.
The laptop is new and in an environment that has little dust. If dust can get in it is a design fault, or a build quality issue.
I am very dissapointed at this point with HP service.
As well at the bottom left and right of the screen you can see scratch marks caused by the screen coming into contact with the speker grill on the keyboard pannel.
HP have said that they will warrant this, if the laptop has not been dropped.
It seems that the helpdesk people follow what are known as "advisaries" with regard to warranty isues. As they dont have one for the dust behind the Infinty screen they dont warrant it, or so they say.
If you have a dust issue you need to log a fault because it seems that warranty response depends on fault volume.
View 5 Replies
View Related
Feb 24, 2009
With a coupon they are about the same I just get less ram and a smaller HDD with the 16T.
How much better is the 16T?
View 8 Replies
View Related
Mar 11, 2009
Has anyone bought this new revised or updated version of the dv7t? Is it the same thing but with new asthetics?
View 10 Replies
View Related
Jan 7, 2009
Here is the setup.
I have a few questions that I need clarification on.
First, is 64-bit ok to get. I've read a lot of articles stating that not many things are 64-bit and that drivers are hard to find, and so on. I believe these articles are a little old but I would like to make sure program running and such is ok.
Second, there are so many processors to pick from. You have the:
T4200 (2.0 GHz)
T6400 (2.0GHz)
T6600 (2.2GHz)
P7450 (2.13GHz)
P8600 (2.4 GHz)
P8700 (2.53GHz)
Choices can be a good thing but it's too confusing here. Is the T6600 better than the P7450?
Third, there are two video cards to pick from:
512MB NVIDIA GeForce 9600M GT
512MB NVIDIA GeForce 9200M GS
Which one is better here? I would think the 9600 but that's just a guess. Seems like the 9200M GS is just now available in 512MB instead of 256MB. So maybe that one is.
View 10 Replies
View Related
Jul 14, 2009
Just wondering if this is normal - I'm not exactly sure how many fan speeds there are, but for the sake of keeping this simple, let's say there are 5 (1=off, 2=low, 3=med, 4=high 5=max).
My computer is usually at 2, but I notice that sometimes just watching videos can make my fan go to 3. Is this ok? I know my computer is plenty powerful so it's not that it's struggling. I guess it's because I have powerful parts and they create some heat. But it can be a little annoying for the fan to go one notch higher on something like videos.
Should I get a cooler or am I good as is?
View 4 Replies
View Related
May 13, 2009
Does anyone know if the DV7T-2000 CTO has VT (virtual Technology) capability?
HP is replacing my DV9700z CTO with a DV7T-2000 CTO, but with the recent news that Windows 7 requires VT or AMD-V for XP Mode and not all of Intel's CPUs are VT capable, i've been trying to find out if HP wrote the capability in to the BIOS of the DV7T, The CPU HP is sending me is capable but i cant get a solid answer if the notebook itself has it.
My current notebook has AMD-V and i'm not willing to accept a replacement unit that has less capability than i currently have.
View 4 Replies
View Related
Feb 4, 2009
My laptop arrived yesterday. I noticed that the fan is also always ON but on a low rpm. Disabling 'fan always on' option at the bios didn't do anything. The fan is still on all the time, again low rpm. I called customer service and we did bios upgrade, bios reset, and acpi uninstall/reinstall.. Nothing changed.
I have done another test.. I haven't heard the fan go on high speed yet. I tried playing 6 quicktime videos simultaneously and did my matlab simulation at the same time. I ran this for probably 10-15 minutes. cpu is running 100% all the time during this test. But my fan didn't increase speed. It stayed the same. the cpu temperature monitor that I have is always stuck on a certain value after the bios upgrade. I have read forums and they said that same thing happened to them, cpu temp monitoring will stop working after the bios upgrade.
View 4 Replies
View Related
May 25, 2009
I have a HP DV7t. The Specs of the notebook are in my sig.
Do you think I should get a cooling fan?
My computer runs great with no problems but I notice that it can get somewhat hot at times when I'm gaming. I don't play games too often and I mostly browse the web, but I play games on occasion.
The pic above is using HWMonitor. The max temps were reached while I was playing StarCraft.
Do you think those temps are too high for playing StarCraft? I have my computer slightly elevated in the back but wanted to know if you think I should get a fan such as the Zalman? What fan is recommended for HP laptops?
View 9 Replies
View Related
Jan 28, 2009
I have Intel(R) Core(TM)2 Duo Processor T5900 (2.2GHz)
What is the max CPU I can upgrade too?
My board is PM45 Northbridge with a 9600gt 512mb
View 3 Replies
View Related
Jun 7, 2009
I got my new DV7T on friday, it's dead by sunday . I was just rebooting and it froze at the hp logo. Turn off then on again; nada. Can't even get into the bios menu. Ugh, this really pisses me off. I only ordered the dv7 to replace my 9700t that had the video card crap out 2 weeks earlier. I'm rapidly losing any faith in any hp product . I've got my repair ticket #. How long has everyones repairs/replacements taken to get back to them?
View 9 Replies
View Related
Feb 28, 2009
I'm not really all that up to date on laptop hardware, especially so far as the screen and such is concerned, but I would like to put a WUXGA screen in my DV7t, is this possible? Will just any WUXGA panel work and plug in, or am I going to be stuck with an HP WSXGA+ panel? Either way, I have to upgrade this 1440 x 900 display,
View 8 Replies
View Related
Mar 12, 2010
HP ENVY 15 customizable Notebook PC
NX369AV
* Genuine Windows 7 Home Premium 64-bit
* Intel(R) Core(TM) i5-540M Dual Core processor (2.53GHz, 3MB L2 Cache) with Turbo Boost up to 3.06GHz
* 4GB DDR3 System Memory (2 Dimm)
* 320GB 7200RPM SATA Hard Drive with HP ProtectSmart Hard Drive Protection
* 1GB ATI Mobility Radeon(TM) HD 5830 Graphics - For i5 and i7-620M Processors
* 15.6" diagonal Full High Definition LED HP Anti-glare Widescreen Display (1920x1080)
* External Tray Super Multi 8X DVD+/-R/RW w/Double Layer Support with 2 USB Ports
* Webcam Only
* Intel Wireless-N Card with Bluetooth
* HP QuickWeb, Corel VideoStudio Pro X2, Corel Paintshop Pro X2, Stardock My Colors
* HP Color Matching Keyboard
* 6 Cell Lithium Ion Polymer Battery
* No Productivity Software
* HP Home & Home Office Store in-box envelope........
View 10 Replies
View Related
Feb 13, 2009
I'm having some issues with my dv7t.
Brief specs:
dv7t
P6800
nVidia 9600M GT
4gb OCZ RAM (I installed this)
2x 7200RPM HD's
Integrated TV Tuner
And the thing gets hot when I watch over-the-air HD.
CPUID Hardware Monitor data:
ACPI
THRM 35*C Min / 90*C Max
CPU
Core0 20*C Min / 20*C Max (shows 70/70 now...)
Core2 21*C Min / 21*C Max (shows 70/70 now...)
GeForce 9600M GT
GPU 52*C Min / 106*C Max
HD's
HD1 35*C Min / 49*C Max
HD2 37*C Min / 54*C Max
It doesn't get this hot normally, just when I watch TV. I know that media center automatically records whatever you're watching, so I'm assuming that is heating up the proc and HD, but holy crap 106*C? It seems a little excessive. Where is the video card on these things so I can try and make sure that is always in open air.
View 10 Replies
View Related
Dec 6, 2009
Looking at a DV7T or DV7 and am wondering about the supposed problem with heat on these. Some appear to have problems and some don't. Does it depend on the build, such as having a quad instead of core 2 duo or faster video card? Are the fan or fans located in the same spot on all builds? Is the venting path more clogged with certain builds? I'm looking at a simple core 2 duo T6600 and standard ATI 4530 on the DVT7 or P7550 and ATI 4650 on the DV7. Should I plan on having any heat issues with this conservative build especially if I don't plan on doing any serious gaming? Or is each one a crapshoot that is built with some doing well and others not so with heat? Obviously heat is a serious factor in the life of the laptop and don't want this to be an issue if I can help it.
Also looking at the Toshiba P505 with 18.4" screen which from what I've read doesn't have many heating issues. But all in all I like the HP better for looks, features and components.
View 10 Replies
View Related
Sep 29, 2009
I bought a Dv7t and it came with a small remote and the basic question i have is:
Where does it go (if there is a slot in the laptop that can hold it)?
I noticed on top of the SD card slot thingy there is a rectangular cover with a symbol on it that is also on the remote (a rectangle with lines coming off of it to the left). Is that supposed to be taken off and the remote slides in there, or is that where you point the remote when you press buttons?
View 8 Replies
View Related
Nov 30, 2009
Have seen the DV7 for around $820 and the DV7T on the HP website for around the same price. They look very similar in looks and specs as they are listed. What exactly would be the difference in the two models and is there an advantage to one over the other?
The DV7-2170us is at B&H Photo link:
[url]
View 10 Replies
View Related
