how to change the screen resolution but, it won't stay at recommended resolution when I restart my laptop, it keeps going back too the smallest resolution. I have to go and change the resolution every time I turn it back on.
I have HP pavilion g6 , win 7 64 bit. Amd Radeon HD 7400M series and Intel HD graphics.My problem started when my screen was getting black for seconds alot and when it comes back it said amd stopped so I decided to update the driver. First I downloaded the supported driver from the site URL.... but every time I try installing it the install process run very quickly the screen doesn't even switch during installation and it says driver is successfully installed although nothing was installed and nothing absolutely change.so I decided to download the latest amd driver from amd site14.4. I had some problems while installing but it worked fine and I had all the options including the switchable graphics.
But after a while the laptop started to hang on startup showing a blue screen saying something was incompatible.So I tried to update the driver from device manager and since then I lost all catalyst control center options also the switchable graphics mode and 3D in Photoshop isn't working anymore and every time I close the catalyst a message come saying it stopped working. I tried many times to uninstall the driver then installing a new versin 14.9, the previous 14.4, the supported but still nothing of them worked at all, also I tried installing with win 7 compatibility but it always gets stuck.
I bought a dv3t-2000 two months ago and recently i installed windows 7 and i just realize that is not possible to change the brightness on the screen, is always the same. I have tried changing the power plans, I've upgraded the BIOS, but so far is not working.
Suddenly I can't change my screen brightness with f2 and f3, and neither in control panel. Is there a new driver I need to install ? My product number is > G6S71UA#ABA
I can't change my monitor's resolution and the screen brightness after I upgrade the windows from windows 7 ultimate to windows 8.1 pro build 9600I've already installed graphic card , but i can't change my resolution more than 1024x768 My laptop is HP 431 with intel core i3-2310m CPU @ 2.10 GHz , AMD Graphics HD 7450M , DDR3 1 GB (i don't know why , but i've already installed AMD Graphics HD 7400M Series because my notebook isn't compatible with other AMD Graphics) , OS 64-bit
for some reason the on screen display meter for my volume when pressing on the keyboard suddenly disappeared, I would like to get this back. I found this thread in the forum URL.... which another was having the same problem I'm having. The only difference is that I'm using HP Pavilion G7 with Windows 7.
We have new Thinkpad X240 laptops that don't have the ability to change the password using CTRL + ALT + DEL. They are using Windows 8.1. These laptops came with Windows 7 and we used the Lenovo media to install Windows 8. The ability to change the password was present right after the Windows 8 install but when we upgrade to Windows 8.1 from the Microsoft store we can no longer change the password.
I've recently bought an HP Probook430 and installed Windows 7 Ultimate 32bit and I don't seem to be able to change the display brightness, using the fn button+f9/f10 (although volume settings are changed in the same method smoothly).
Although the brightness settings don't seem to change, this bar does appear when pressing fn+f9/f10. What should I do in order to make the display brightness settings changable?
I was using my HP Pavilion g7 the other day, while gaming and the screen went black for no appairent reason. i haven't down loaded anything recently and i run virus software.
We went to the HP support web site and went through several diagnotics. When the laptop is rebooted the screen on the laptop will flash images of my desk top but once the machine boots up the screen remains blank. you can see the glow from around the edges but that is it. I have another monitor plugged in currently and the system is functioning propertly except for this. We have also done the following, hard reset,Test for memory modual problems, test the hard drive. I was also trying to update the video drivers but the system tells me the drivers are working properly.
I have an hp pavilion dv6. It was purchased at the end of 2010. My computer teens to get hot a little quicker than normal. It had overheated a couple times, but not recently.I recently went on a road trip and when I got back my computer screen won't turn on. While I was away, I took the bottom plastic screen off and put it back on (one of the sides had come loose and a tab was sticking out). I also tightened all the screws on the main cover on the bottom because some had come loose.When I got home and tried to turn my laptop on, the screen wouldn't turn on. I can hear the fan turn on. The light indicating the wifi was on, but showing that it was off- and it was on when I last used my computer. Also, the capslock light is blinking. I don't hear any sound from the speakers or anything like that. I tried hooking it up to a projector but never got a signal. I tried unplugging it and removing the battery and holding the power button for 30 seconds but nothing changed when I tried turning it back on.
When I log on my hp sleekbook 14 pavilion laptop the screen goes blank. But I can see the cursor is moving. I can hear the windows sound. I can work on safe mode. Programs running but can't see anything. OS is win 7
I have had my Hp dv7 notebook for a few months now and have had no problems. But all of a sudden, I turn on the computer and see nothng but a blank, black screen. I do not know if I changed the display settings or what, but I cannot see anything. I know the computer is functioning because the fan turns on and the keyboard lights work. When I connected my laptop to an external monitor, I was able to see that my computer was on and fully functional. In fact, I am using it right now on an external monitor to type this message.
My Pavilion dv9000 screen is black. I know the graphics card is faulty, what are my options to get this replaced. If I purchase and replace the motherboard will I get this same problem later down the road.
my laptop screen backlight goes off, when I rest my hand on the left side of the touchpad. The darkening of the screen can be also reproduced when a small pressure is applied on the case just above the ethernet port or above the headphones port. When the screen goes dark, I can see that everything is running normal, if I shine on it with a lamp or strong light. The resulting effect seems to be the same as if I would have lowered the brightness to minimum.
When I don't press the area described above, the screen is just fine. I am sure this problem is not software or OS related. I googled it a lot and my guess is lose connection on the inverter?
One last thing - idk if related - sometimes, when I boot up the laptop, the backlight is turned off and I have to adjust it by pressing F3.
I recently purchased an HP Pavillion X2 2in1 laptop and want to connect it to my TV. The laptop was recentluy upgraded to windows 8.1. When I connect using an HDMI cable, the TV recognises that the HDMI is connected, but the laptop screen will not transmit onto the tv screen. When I hit f4 to toggle the display, it says 'Your PC cannot project to another screen. Try reinstalling the driver or using another video card.'
When I go into control panel as recommended on other queries, the adjust resolution screen does not give me any other options than the Basic PnP display. It's like my laptop cannot detect my tv. It is not in my computer, devices or anything. I didn't attempt connecting it to my tv when it just had windows 8 on it ...
My hp pavilion x360 was working fine today inthe morning when I turned it on it all seemed normal I put in the log in password and once I hit enter the screen went black bu the cursor was still showing.
Blank display, connected to tv via hdmi and to monitor via vga still blank. Tried with single ram in both slots alternatively still blank. Reconnected hdd still the same. Consulted with a technician, who tells that it is possibly a IC got corrupted (maybe of the vga or graphic). Is it repairable without replacing motherboard. If so then, where do I find the IC. What is the IC model number and what else do I need to do?
Using: HP Pavilion dv6-3050tx Product number: XB772PA#ACJ
My screen gets black when I start windows 7 on my Hp Paviliom Dm1 Notebook. Also I connected my pc to an external monitor through VGA cable and then I can see the windows operating system in the external monitor . I did a start-up test and then I got these results:
Turn on my g6 last night and it turned on but the screen does not the fan turns on and the lights are normal I tried taking the battery. Out and the adaptor and did the 30 second thing that did not work I tried it without the battery and still nothing at one point it sounded like the operating system turned on but the screen did not (windows 7). I've lots of work to be doing on my laptop
I have HP Pavilion G6-1305sx notebook with screen brightness control issue. The f2 and f3 keys (for brightness control) do not work . I've tried through control panel, but still cannot.The light on the screen is too bright for my eyes.
When I switch the laptop on, I can hear the fan, the wifi and caps lights come on but the display remains blank. This happened about two weeks ago so I did a hard reset and that worked. When my laptop, which is a pavilion g6-1112sa model that I've only had for two tears went into sleep mode yesterday I tried to awaken it but the screen just remained blank. I've tried a hard reset again today but it doesn't work at all.
I have an hp Pavilion g7-1150us Notebook that is approximately 3 yrs old. I turned it on the other day to find that the screen is all pink and green with lines etc... Is there an independent video/graphics card that can be replaced? I would like to be somewhat knowledgeable when taking it in to be repaired.