Lenovo P/Y/Z Series :: Z580 Touchpad Not Registering Two Finger Click On Windows 8.1
Oct 30, 2012
I recently upgraded my Z580 to Windows 8.1 x64 from Windows 8x64
Some Windows 8.1 drivers work, for some things I had to use Windows 8 drivers
But the touchpad isn't registering a two finger click as a right click on either of the drivers. It used to work fine on Windows 8 but I have to use the button to right click which is uncomfortable. Two finger scrolling works fine, pinch zoom gesture works fine, even Windows 8 screen edge gestures work perfectly...
View 9 Replies
ADVERTISEMENT
Dec 27, 2014
I just got a Lenovo Y40 and the touchpad uses the ELAN software. I already set up two finger option to open right click (pop-up menu).
View 9 Replies
View Related
May 7, 2014
My laptop is ideapad z510 and os is windows 8.1All action and gestures are working in elan touchpad except two finger pad (Right Click)I searched the forum and found that the synaptic driver can fix this problem, but when I want to install it tell me that this system does not have any synaptic touchpad!I test both lastest update from Lenovo and Microsoft for touchpad driver, but didn't solve this problem!
View 6 Replies
View Related
Oct 19, 2013
I recently purchased a Lenovo Y510p, and the touchpad uses the ELAN software. However, by default, it doesn't seem to allow you to use two fingers to tap for right click, nor three for middle click.
After digging into the matter, I discovered you can make some changes by installing Asus Elantech driver 11.5.0.9 to allow you to see many more options in the control panel, and I successfully changed Swapping and 3 and 4 finger touch functions.I am struggling to change the double finger tap.
View 9 Replies
View Related
Jan 24, 2013
I bought my Y580 about a month ago and it has been great. The only problems I've been having with it is with the touchpad. About a week ago the synaptics software on here started to shutdown at random and things like two finger scrolling and swiping from the sides would all stop working. I searched around and downloaded updated software both from synaptic's website and from lenovo driver support. The newest ones from lenovo are the only ones that don't quit at random but now the only thing that doesn't like to work still is the two finger tap to right click. Sometimes it'll work for the first ten min when I first turn the laptop on but then it'll quit. Two finger click sometimes works for right click but not always and two finger tap for right click never works any more.
View 9 Replies
View Related
Mar 17, 2014
I have a problem with my TouchPad , the scrolling of right side has been stopped working ... I've installed all drivers that belong to touchpad , but it doesn't work as well as before , mean it doesn't work even ( the right side ) , i just can use my tow fingers for scrolling, but the right side was so much better ..
View 2 Replies
View Related
Apr 21, 2013
I bought my Y500 a few days ago and happy with it in general. However, one day the two-finger-tap (for right click) on the touchpad stopped working. Below is a description.
Everything else as far as I can tell, including two-finger scroll and one-finger tap and so forth, are working fine, but the two-finger tap stopped working even though it worked fine for a few days. I have a suspicious as to what caused it but I'm not entirely sure. In any case I think it's most likely a bug, and probably software.
One day I went into "control panel" -> "mouse" -> "device settings" -> "settings..." -> "Scrolling" -> "two-finger scrolling" -> "enable coasting". I played with coasting for a while, and soon disabled it again because I didn't really like it. However, it was then that I noticed that my two-finger tap stopped working. I have doubled-checked that "control panel" -> "mouse" -> "device settings" -> "settings..." -> "clicking" -> "two-finger click" is set to "secondary click (context menu, special drag)", but the two-finger click still doesn't work, even after a restarted. I downloaded the latest driver (version 16.2.18.0) and it still didn't work. I uninstalled the driver and installed it again and it still doesn't work. Now I like using the touchpad, but really hate living without two-finger tap for right-clicking.
View 5 Replies
View Related
Jul 14, 2014
I have a Lenovo G500. After use, the keyboard touchpad does not click at first. The mouse can be moved first touch, but just click on the second touch. If no default driver installed, you can click after first use keyboard.
View 9 Replies
View Related
Jan 16, 2015
So since I've bought this computer I've had problems with the two-finger scrolling suddenly stopping, like many people have. That's always been fixable by going into properties, device settings, settings, unchecking/rechecking one of the boxes under "two finger scrolling" and hitting OK.
Now, though, my touchpad is suddenly stuck on one finger scrolling, and it's super annoying. There is no "one finger scrolling" option under the "scrolling" drop down thingy under device settings, so I haven't a clue why this is happening. I've tried the usual fix above, restarting the computer, installing new drivers, but it still does one finger scrolling. Which means it scrolls a lot of the time when I don't want it to, and the pointer seems to get "stuck" at times when I'm just trying to move it around.
View 4 Replies
View Related
Jun 24, 2014
I get this spiral symbol (see above image) in place of my mouse indicator when I move my fingers a certain way on the ultranav mousepad.
One way it occurs is if I move my finger from left to right or right to left across the bottom of the ultranav mousepad.
It interferes with me being able to move the mouse. I suspect it is to prevent inadvertant movement of the mouse when your finger just brushed the ultranav mousepad. I would like to turn it off if possible.
View 9 Replies
View Related
May 13, 2013
About a year ago I bought a Lenovo IdeaPad Z580 with Windows 8 preinstalled. My question is this:
I want to upgrade my hardware by replacing my current hard disk with an Solid State Disk. The problem is that in windows 8 there is not any program except the OneKey Recovery which obviously it isn't a Microsoft's official recovery application (such as the one in Windows 7). If I create a disk with OneKey then is there any way to use it to install windows 8 on the new SSD disk? How the pc is gonna recognize a backup disk created by an application which is not installed on it?
View 3 Replies
View Related
Jul 4, 2012
My machine is Lenovo Z580 with Windows 7. Some time ago I accidentally installed Linux Mint on my whole HDD, so all the partitions and files (including recovery partition) were erased. I then installed back Windows 7 and partitioned the HDD.
However, since the incident, I'm unable to enter BIOS. I'd like to change boot sequence, because the laptop wants to boot from network, displays an error, and then boots from HDD and Windows 7 starts. I can access boot manager with F12 during boot, and the entries are (those aren't the exact names of course, except the first one):
1. ubuntu <- yes, that's how it's called. I guess it's a remnant of Linux Mint installation
2. booting from network
3. booting from HDD
4. booting from DVD
5. booting from USB
I tried the following things:
1. pressing F2 at boot. it used to work before the incident, now the laptop ignores it and proceeds to attempting boot from network, displays an error, and then boots from HDD.
2. using Novo button instead of power button, then choosing "BIOS setup" option - the laptop still proceeds to boot OR displays black screen and need to be shut down
3. removing boot entries using Ubuntu via USB stick [URL] ..... - I can't remove any entry, because after using
>efibootmgr -v
no list appears, and when I enter
>efibootmgr -B -b 001
or any other number, I get an error that the entry wasn't found.
I can't flash BIOS because Lenovo didn't provide the necessary file for this model. I also can't sent the laptop to repair because my warranty period ended two months ago.
So, I flashed the file attached here: [URL] .... and everything works now! the "ubuntu" entry has been automatically deleted and I was able to access BIOS and change the boot order.
Before installing ... write down MAC address of your LAN card, because it'll get deleted after BIOS update!
1. press windows key+R, type cmd and press Enter.....
2. in the opened command window, type ipconfig /all and press Enter, find the entry regarding your Ethernet connection and write down the physical address....
3. Flash BIOS update
4. After reboot follow this guide: [URL] .....
View 9 Replies
View Related
Jul 3, 2014
I tried to recover my PC to factory settings using the CD's that I had created with OneTouch Recovery software. However the recovery failed - perhaps due to scratches in the disk.
View 2 Replies
View Related
Mar 29, 2014
I am unable to enter Bios settings on z580 with windows 8.1. I have tried everything including holding shift with shutdown and accsesing bios within windows, nothing seems to work and windows just strarts up normally. I also can't find a update to fix this problem.
View 8 Replies
View Related
Feb 16, 2014
I have just done a restore using OneKey. And Windows 7 has updated itself.
Now, After I log in to windows 7, after 20 seconds, before it initialises all the programs on the laptop, it restarts.
What can I do to stop the laptop from restarting?
View 5 Replies
View Related
Mar 6, 2012
I've recently purchases a Lenovo ThinkPad Edge 540 and it worked just fine untill earlyer today.While i was browsing the internet, some how my touchpad developed a problem.It only registeres right click where ever i click.I've deleted the drivers, even tho they were the knewest ones, downloaded a fresh .exe and installed it after the reset and what not and it still has the same problem.
If i turn off the touchpad in the ultranav software and enable only trackapad, the buttons work like they should, the large area in the touchpad registeres as the left click and the small area in the top right is registered as the right click. Tho i can't use the touchpad for navigation.So clicking doesn't works, well neither does tapping. I can doubletap normaly, but i cannot tap and drag such as selecting a block of text.
Again, i've already tried a fresh install of ultranav drivers and it didn't work. The problem manifested itself during normal browsing, nothing was installed nor changed hardware vise. It litteraly changed in a second.how to solve it since the driver reinstall didn't work.
View 9 Replies
View Related
Jan 21, 2012
Yoga 11s a great computer but why should the two-finger tap to right click be unavailable? It's a commonly found gesture on Windows and Macs these days and that it's missing be default on my machine drives me crazy. Having to press down firmly to click in the bottom corner or having to click while pressing down two fingers is annoying. I've read some solutions involving drivers and registry edits but not sure what I want to undertake.
View 2 Replies
View Related
Nov 10, 2012
Having a problem with two-finger tap to right click? Two-finger tap to right click was working fine for a while, but it suddenly stopped on my Yoga 13.
I reinstalled the touchpad drivers, and it worked for a few days, then it stopped again. Two-finger click still works fine. So does one-finger tap to left click.
View 9 Replies
View Related
Feb 20, 2015
I recently purchased an Acer Aspire R7-572-6423 touchscreen notebook. It works great for the most part except for the touchscreen seems to glitch out every once in a while. What happens is out of nowhere the touch screen will start registering a click in the very upper left corner of the screen (as seen by the Windows 8 touch visual feedback) even though I am not touching the screen. The clicking happens very fast (several times a second) and makes the notebook unusuable.
I can make the clicking stop by touching and holding my finger on the screen near where the clicking is happening. However, as soon as I lift my finger, the clicking resumes.
To fix the issue, I have to do a touch screen calibration (Windows settings -> Tablet PC Settings -> Calibrate -> Touch input). However, the calibration appears to be off using this method (I cannot swipe the windows 8 bar to the right) so I then do a calibration reset (Tablet PC Settings -> Reset). This generally resolves the issue for a while.
I have tried moving the screen into different positions and cleaning the screen but the issue still comes back on occasion.
View 8 Replies
View Related
Aug 2, 2013
Recently my fingerprint stopped working for power on and Windows login. Fingerprint reader setup utility started to show some strange error followed by empty utility window (see screenshots below).
Link to picture
Link to picture
I have updated all the software using "Lenovo update and drivers" but it did not work (BIOS image also was updated during this process). I doubt that it is hardware fault because I have Linux OS installed as dual boot among with Windows, and no problems there with logging in using fingerprint reader (fingerprint-gui package)...
View 7 Replies
View Related
Jul 9, 2009
is anyone else having probs with their touchpad? i got this laptop in Feb and now when i click the button on the touchpad i have to press it a couple times before it does anything.
View 4 Replies
View Related
Jan 25, 2014
I have a lenovo z580, and my webcam is inverted.
I have tried updating the driver, disabling and re-enabling the device.
In the youcam software I can "flip" it vertically but this does not correct it for use in skype etc....
View 5 Replies
View Related
Dec 27, 2012
plugged in but not charging message is displayed
View 5 Replies
View Related
Oct 3, 2013
My new Lenovo Z580 runs windows 8 64bit, core i3 3rd gen, 4gb RAM.
The problem is, since day 1,every few minutes the internet stops working. It shows as connected, the router is working, other connected devices run as intended and everything's fine. But internet doesn't work on my laptop. It says "Could not connect to the network". I have tried doing the "keep wifi on during sleep" etc. but nothing works. It just stops working after a while even though I am using the laptop, it just suddenly stops. It even shows as connected, and packets are being received but internet or any application over the internet will not work untill I disconnect and reconnect.
View 9 Replies
View Related
Jul 24, 2014
Suddenly my keyboard seems switched to a different layout.
When I press ; I get now +
When I press : I get now ±
When I press @ I get now "
When I press " I get now `
When I press ) I get now '
etc.
So it looks like my Ideapad Z580 has suddenly adopted the settings of another keyboard layout. How I can restore the correct settings?
View 2 Replies
View Related
Nov 4, 2012
I bought a new Lenovo Z580 this past June. Shortly after I began using it, a system message popped up explaining to me that since I often have my laptop plugged in, it would conserve battery life if I let the system change my settings so that the battery didn't fully charge -- this would save battery life over the longterm and I would be free to change the setting whenever I wanted to. Well, this has been the biggest mistake ever. I now essentially have a desktop because I cannot find any setting that allows me to change the battery to fully charge (it only charges to 40 or 50%). There isn't any mention of this feature in the user guide materials that I can find and none of the Power Options allow me to change the battery charge capacity.
View 7 Replies
View Related
Jun 9, 2013
I bought a brand new Lenovo Z580 Ideapad 2 months ago and now I am experiencing abrupt shutdown. I work for sometime and suddenly it automatically shutsdown (it doesn't show th shutting down progress instead it turns powers off the laptop at that instant). Here are my specs:-
Model:- Z580
RAM:- 4GB
Processor:- i5 3210M
HDD:- 1TB
Graphic Card:- Intel HD 4000 and Nvidia 635M
OS:- Windows 8
View 9 Replies
View Related
Jul 5, 2014
I have an Ideapad Z580 with a 30mbps cable internet connection (running Win8.1). I've tested the cable modem with a number of laptops in my house, and the Ideapad is the only one that regularly times out on loading webpages.
What I've tried:
1. Updated Realtek Ethernet driver to newest version
2. Changed to Google Pub DNS servers (no difference from cable providers)
3. Changed power settings to High Performance (rather than balance or the battery setting)
4. Turned off IPV6 on the ethernet adapter
The problem seems to be random. Pages will load quickly and then suddenly they all time out (such as google and lenovo.com). When I ping both the url and the ip address they time out during these periods.
The problem is definitely with the laptop and not the cable connection as such. The modem does not need to be reset, as other laptops in the house load webpages normally.
View 6 Replies
View Related
Jun 3, 2013
I Just Brought New Lenovo z580 Win 7 , 6Gb Ram , 1 TB ... The problem start after 1 week , the screen random crash like the image attached .. i tried to uninstall and install the graphics card nvida and intel but nothing happen the problem that its random .. almost it happened with google chrome ,, not with high graphics games ...
View 9 Replies
View Related
Oct 18, 2014
Initially my laptop had windows 7 , recently i updated it to windows 8.1
When i installed realtek audio driver, dolby digital plus home theater was installed instead of dolby home theater v4.
Looking for detailed steps for installing dolby home theater v4?
View 3 Replies
View Related
