Lenovo P/Y/Z Series :: IdeaPad Z580 - Windows 8 And SSD Disk
May 13, 2013
About a year ago I bought a Lenovo IdeaPad Z580 with Windows 8 preinstalled. My question is this:
I want to upgrade my hardware by replacing my current hard disk with an Solid State Disk. The problem is that in windows 8 there is not any program except the OneKey Recovery which obviously it isn't a Microsoft's official recovery application (such as the one in Windows 7). If I create a disk with OneKey then is there any way to use it to install windows 8 on the new SSD disk? How the pc is gonna recognize a backup disk created by an application which is not installed on it?
View 3 Replies
ADVERTISEMENT
Feb 16, 2014
I have just done a restore using OneKey. And Windows 7 has updated itself.
Now, After I log in to windows 7, after 20 seconds, before it initialises all the programs on the laptop, it restarts.
What can I do to stop the laptop from restarting?
View 5 Replies
View Related
Jul 24, 2014
Suddenly my keyboard seems switched to a different layout.
When I press ; I get now +
When I press : I get now ±
When I press @ I get now "
When I press " I get now `
When I press ) I get now '
etc.
So it looks like my Ideapad Z580 has suddenly adopted the settings of another keyboard layout. How I can restore the correct settings?
View 2 Replies
View Related
Oct 18, 2014
Initially my laptop had windows 7 , recently i updated it to windows 8.1
When i installed realtek audio driver, dolby digital plus home theater was installed instead of dolby home theater v4.
Looking for detailed steps for installing dolby home theater v4?
View 3 Replies
View Related
Jun 21, 2014
I have lenovo ideapad z580 with win-7 64bits...
I tried to to recover from onekey recovery key I use system recovey mode but at that time i got error:"The program cannot find service partition. This function currently unavailable ."
My system work normally... I wont my lappy factory default...
Link to picture ......
View 1 Replies
View Related
Oct 26, 2014
I'm trying to Install Debian GNU/Linux on my Windows 8 Ideapad Z710, and I can't even get my laptop to boot from external media. From the InsydeH20 Setup Utility, I've so far disabled Secure Boot, set Boot Mode to UEFI, enabled USB Boot, enabled PXE Boot to LAN, and set my EFI boot order to 1) EFI Network 0 for IPv4, 2) EFI Network 0 for IPv6, then 3) Windows Boot Manager (no other options). I'm not actually trying to boot from a network, I just want to boot from the onboard DVD drive or my USB DVD drive. When I boot with these settings, I get the error: EFI Network 0 for IPv4 (...) boot failed, then a similar one for IPv6, then it boots to Windows. Why can't I boot from DVD or USB?
Another thing I've tried is setting Boot Mode to Legacy Support and Boot Priority to Legacy First (with Secure Boot disabled) which results in my laptop booting to straight to Windows even when USB ODD is first in the boot order.
View 4 Replies
View Related
Jul 4, 2012
My machine is Lenovo Z580 with Windows 7. Some time ago I accidentally installed Linux Mint on my whole HDD, so all the partitions and files (including recovery partition) were erased. I then installed back Windows 7 and partitioned the HDD.
However, since the incident, I'm unable to enter BIOS. I'd like to change boot sequence, because the laptop wants to boot from network, displays an error, and then boots from HDD and Windows 7 starts. I can access boot manager with F12 during boot, and the entries are (those aren't the exact names of course, except the first one):
1. ubuntu <- yes, that's how it's called. I guess it's a remnant of Linux Mint installation
2. booting from network
3. booting from HDD
4. booting from DVD
5. booting from USB
I tried the following things:
1. pressing F2 at boot. it used to work before the incident, now the laptop ignores it and proceeds to attempting boot from network, displays an error, and then boots from HDD.
2. using Novo button instead of power button, then choosing "BIOS setup" option - the laptop still proceeds to boot OR displays black screen and need to be shut down
3. removing boot entries using Ubuntu via USB stick [URL] ..... - I can't remove any entry, because after using
>efibootmgr -v
no list appears, and when I enter
>efibootmgr -B -b 001
or any other number, I get an error that the entry wasn't found.
I can't flash BIOS because Lenovo didn't provide the necessary file for this model. I also can't sent the laptop to repair because my warranty period ended two months ago.
So, I flashed the file attached here: [URL] .... and everything works now! the "ubuntu" entry has been automatically deleted and I was able to access BIOS and change the boot order.
Before installing ... write down MAC address of your LAN card, because it'll get deleted after BIOS update!
1. press windows key+R, type cmd and press Enter.....
2. in the opened command window, type ipconfig /all and press Enter, find the entry regarding your Ethernet connection and write down the physical address....
3. Flash BIOS update
4. After reboot follow this guide: [URL] .....
View 9 Replies
View Related
Jul 3, 2014
I tried to recover my PC to factory settings using the CD's that I had created with OneTouch Recovery software. However the recovery failed - perhaps due to scratches in the disk.
View 2 Replies
View Related
Mar 29, 2014
I am unable to enter Bios settings on z580 with windows 8.1. I have tried everything including holding shift with shutdown and accsesing bios within windows, nothing seems to work and windows just strarts up normally. I also can't find a update to fix this problem.
View 8 Replies
View Related
Oct 30, 2012
I recently upgraded my Z580 to Windows 8.1 x64 from Windows 8x64
Some Windows 8.1 drivers work, for some things I had to use Windows 8 drivers
But the touchpad isn't registering a two finger click as a right click on either of the drivers. It used to work fine on Windows 8 but I have to use the button to right click which is uncomfortable. Two finger scrolling works fine, pinch zoom gesture works fine, even Windows 8 screen edge gestures work perfectly...
View 9 Replies
View Related
Feb 5, 2014
Purchased from Amazon 2 months ago and worked perfectly without a hitch until a few days ago when I got on the receiving end of the win8 equivalent of the BSOD with the . From them on I ended up with slow boots random pauses etc. I opted to refresh the PC without affecting any files but toward the end of the reinstall the BSOD appears and now all I had was a black background with only a white cursor.
Left that for over a hour, nothing happened so held down the power button to force shutdown. Found that Z500 no longer boots into win8 so eventually decided to do a clean reinstall with the onekeyrecovery via NOVO button. This should have been the end of all the problem I was having but unbelievably the problem is still there.
Research what I could about this and found that the slow boot is caused by hard disk constantly being thrashed about by a system file ntoskrnl.exe. I tried updating the wifi driver and it appeared to have done the trick until the next day when I booted up the system again. It appear that the constant hd activity goes away after a few hours of leaving the PC on.
Anyway I have drawn a blank as to what's going on especially as everything was working perfectly until up to that point with no signs of system conflict.
View 5 Replies
View Related
May 6, 2014
I bought my laptop from france so windows is in french ... I installed language pack core of system is still in french. How could I install legit windows 8.1 on it that is in english.
Not now but near future I want to replace that slow hard disk that is in it from shop to faster SSD and then again I need to know how to get that windows there ... back in the days it was easy, you had that number and you had the disk how does it work now ?
View 1 Replies
View Related
Sep 29, 2014
i have a ideapad z570 running win 7. i want to use win 8 now, i want to erase the data from hidded partition, i want to edit the data in hidden partition such that, if One key is used later, it installs win 8. dont suggest visiting to lenovo service center.
View 6 Replies
View Related
Feb 4, 2015
I have bought a Lenovo Z50 70 laptop with free DOS. I have sucessfully installed Windows 8.1 in it. I want to install Fedora 20 alongside with windows 8.1. But I have failed to do this after trying so many times.
I have noticed the following things in my laptop
1. In windows 8.1 recovery option on menu is displaying for UEFI firmware setting. ( I have installed windows 8.1 in legacy support mode in BIOS)
2. In BIOS setup (tapping F2 at the time of booting) no "Secure Boot Option" is displaying.
View 4 Replies
View Related
Dec 24, 2014
I've bought a Lenovo IdeaPad Z50-75 ( with Free DOS ):
Bios Version: A4CN24WW (V 1.03)
I am trying to install Windows 8 but it just doesnt work. not matter if i allow secure boot or disable it. no matter if i choose from the "OS Optimized Defaults : [Win8 64bit]"
I changed the boot priority so that the DVD-Reader is on the highest place (1). Got a working Win8 DVD, also got win7 professional, but i'd rather install Windows 8.
Even though Win7 is okay too if it'll work then.
I don't know what to do other than switching around between all those options. and it doesn't work at all.
Whenever i start the laptop and choose to start with the DVD-Reader it lights up and nothing happens.
View 9 Replies
View Related
Oct 10, 2012
I have a Y560 ideapad and the hard disk recently crashed, I did not have enough time to take a backup of my windows copy. I have purchased a new hard disk and installed a fresh copy of windows 7 on it, downloaded all the drivers from the lenovo support website but I really would like to have done the one key recovery on the new copy of windows to set it back to the factory settings.
View 3 Replies
View Related
Nov 22, 2014
I have an IdeaPad V570 that experienced a total hard drive failure (be careful how hard to close the laptop in frustration) I had Best Buy try to recover data and opted not to pay for the recovery after the only crucial data did not seem to have been recovered. Best Buy told me the rest of the system seems to be intact so they could install a new Hard Drive if I wanted it back. They made me offers to completely restore the system at a price but I decided to save money thinking I should be able to restore the system myself. So they installed the hard drive and that was it.
I decided to go with Windows 8 after learning that support was beginning to wain for Windows 7. I purchased the OS from Best Buy and I am attempting to install it. So far that is not going well. The BIOS sees the CDDVDW drive and the HDD, both are listed in the BOOT menu with the right names. However the computer is not booting from the WIndows disk. I get a message ending with :
PXE-E61: Media test failure, check cable
PXE-M0F: Exiting PXE ROM
At which point it take me to the Boot Menu. I can see the order I have set for Booting is:
1. ATAPI CD: TZSSTcorp CDDVDW TS-L633F
2. ATA HDD: WDC WD10JPVX-22JC3T0
3. PCI LAN: Realtek PXE B03 D00
It seems to me that the system is trying to boot in that order but the CDDVD drive is not responding, the HDD has nothing on it so it goes for the PCI LAN and there is nothing for it to do so it returns the error an sends me back to the Boot Menu.
View 2 Replies
View Related
Jul 16, 2014
I would like to restoring my PC but I cannot create restoring date earlier than 7 days.
View 3 Replies
View Related
Nov 13, 2014
I can't adjust brightness ....
View 3 Replies
View Related
Jan 25, 2014
I have a lenovo z580, and my webcam is inverted.
I have tried updating the driver, disabling and re-enabling the device.
In the youcam software I can "flip" it vertically but this does not correct it for use in skype etc....
View 5 Replies
View Related
Dec 27, 2012
plugged in but not charging message is displayed
View 5 Replies
View Related
Aug 21, 2013
I bought this laptop for my son to use and like many, he didn't care for Windows 8. So, I downloaded the drivers for the laptop and then did a clean install of Windows 7 Professional. I have been unable to find a driver that will work for the Network Controller. The drivers you can download on the Lenovo site do not work. This computer is useless to him unless we can get the wireless working.
View 5 Replies
View Related
Aug 13, 2014
I just opened my Ideapad u430, and immediately noticed that the windows OS was installed on the 500gb sata drive instead of the SSD. I'm pretty sure the whole point of the SSD portion was to install the OS on it to speed performance. Any tips on how to transfer the OS onto the other side of the partition without having the original discs?
View 4 Replies
View Related
Feb 20, 2014
I recently bought the Y510p laptop and upgraded windows to 8.1
Since the upgrade i'm getting contant freezing, which could last 10seconds or 10minutes.
Any time i restart the computer it will hang, and the only way to kill is it to press on Power button.
Checked the eventviewer and i found the following warning appearing every minute:
Log Name: System
Source: iaStorA
Date: 20/02/2014 17:36:40
Event ID: 129
Task Category: None
Level: Warning
[Code] ....
After long research i came to conclusion that the ExpressCache is causing this.
The moment I uninstalled it, issues disappeared. System will restart without any issues, it won't freeze either.
Checked the following article: [URL] ....
Tried to re-install ExpressCache but the issue started to presist straight away, constant freezing and the above message in event viewer.
View 9 Replies
View Related
Oct 19, 2013
Yesterday, I updated to win 8.1. The process appeared to go smoothly, but I now have a number of issues:
1 If I close the lid and reopen, the sytem does not wake up. It does not wake up if I press the power button. All I can do is a hard shutdown and reboot. This occasionally gives an error message on restart, but has not produced any solutions.
2 There is a message about secure boot not being configured
3 The support app has a cross on it and won't work
No doubt there are other problems, but number 1 is the killer....
View 9 Replies
View Related
Feb 20, 2014
I just bought Lenovo Ideapad S110 netbook. It already has MeeGoo OS installed but I want to install Windows 7 32 bit. So I made a bootable usb using Windows 7 USB DVD Download Tool and tried to install Windows 7 using my usb. However I have an error "No CD/DVD driver found" I have tried all three usb slots but there still is that problem. All three slots are USB 2.0.
View 2 Replies
View Related
Jan 24, 2014
I have been struggling with installing w8 on my Ideapad z510 laptop in UEFI mode, but neither I could succeed it nor I could I find something that might work. I will clearly explain the case.
Point 1:
As I understood, to succeed w8 install in UEFI format, one needs to choose "UEFI First" mode from Boot Menu in BIOS. Then, the source of the boot needs to be specified to identify the rigid path to the documents to load so that new OS could be installed correctly.
Problem1:
It is possible to chose UEFI First from boot mode, but it's not possible to choose the USB path for UEFI booting in this case, which doesn't allow you to succeed a UEFI boot to your computer. You can't reach the DVD or USB, where the installation files are, and start installation process.
Point2:
Considering the first case, you need to choose Legacy Support mode to boot your computer and reach USB disk or DVD to install new OS on the computer.
Problem2:
To succeed UEFI mode booting to the computer, you need to see 4 different partitions on your disk at point of disk selection, where you choose the disk you'll install your OS. However, when you select the Legacy Support mode from BIOS, the disk partition is limited to 2 in my case, which are:
Primary diskSystem reserved (350 MB)Hence, when I continue with the installation, the OS is installed on Legacy mode. After installation, when I go to BIOS to choose UEFI mode for boot mode, the laptop checks some connections from network and says
EFI network 0 for IPv4 failedEFI network 0 for IPv6 failed respectively.
PS: Please don't tell that "you can't install, because your computer doesn't support", because I received the computer from technical service and a version of W8 was installed on it in UEFI mode. However I deleted it to install W8 pro.
View 2 Replies
View Related
Oct 3, 2013
My new Lenovo Z580 runs windows 8 64bit, core i3 3rd gen, 4gb RAM.
The problem is, since day 1,every few minutes the internet stops working. It shows as connected, the router is working, other connected devices run as intended and everything's fine. But internet doesn't work on my laptop. It says "Could not connect to the network". I have tried doing the "keep wifi on during sleep" etc. but nothing works. It just stops working after a while even though I am using the laptop, it just suddenly stops. It even shows as connected, and packets are being received but internet or any application over the internet will not work untill I disconnect and reconnect.
View 9 Replies
View Related
Mar 17, 2014
I have a problem with my TouchPad , the scrolling of right side has been stopped working ... I've installed all drivers that belong to touchpad , but it doesn't work as well as before , mean it doesn't work even ( the right side ) , i just can use my tow fingers for scrolling, but the right side was so much better ..
View 2 Replies
View Related
Nov 4, 2012
I bought a new Lenovo Z580 this past June. Shortly after I began using it, a system message popped up explaining to me that since I often have my laptop plugged in, it would conserve battery life if I let the system change my settings so that the battery didn't fully charge -- this would save battery life over the longterm and I would be free to change the setting whenever I wanted to. Well, this has been the biggest mistake ever. I now essentially have a desktop because I cannot find any setting that allows me to change the battery to fully charge (it only charges to 40 or 50%). There isn't any mention of this feature in the user guide materials that I can find and none of the Power Options allow me to change the battery charge capacity.
View 7 Replies
View Related
