Lenovo P/Y/Z Series :: Windows 8.1 In English On IdeaPad Z50-75
May 6, 2014
I bought my laptop from france so windows is in french ... I installed language pack core of system is still in french. How could I install legit windows 8.1 on it that is in english.
Not now but near future I want to replace that slow hard disk that is in it from shop to faster SSD and then again I need to know how to get that windows there ... back in the days it was easy, you had that number and you had the disk how does it work now ?
About a year ago I bought a Lenovo IdeaPad Z580 with Windows 8 preinstalled. My question is this:
I want to upgrade my hardware by replacing my current hard disk with an Solid State Disk. The problem is that in windows 8 there is not any program except the OneKey Recovery which obviously it isn't a Microsoft's official recovery application (such as the one in Windows 7). If I create a disk with OneKey then is there any way to use it to install windows 8 on the new SSD disk? How the pc is gonna recognize a backup disk created by an application which is not installed on it?
i have a ideapad z570 running win 7. i want to use win 8 now, i want to erase the data from hidded partition, i want to edit the data in hidden partition such that, if One key is used later, it installs win 8. dont suggest visiting to lenovo service center.
I have bought a Lenovo Z50 70 laptop with free DOS. I have sucessfully installed Windows 8.1 in it. I want to install Fedora 20 alongside with windows 8.1. But I have failed to do this after trying so many times.
I have noticed the following things in my laptop 1. In windows 8.1 recovery option on menu is displaying for UEFI firmware setting. ( I have installed windows 8.1 in legacy support mode in BIOS) 2. In BIOS setup (tapping F2 at the time of booting) no "Secure Boot Option" is displaying.
I've bought a Lenovo IdeaPad Z50-75 ( with Free DOS ):
Bios Version: A4CN24WW (V 1.03)
I am trying to install Windows 8 but it just doesnt work. not matter if i allow secure boot or disable it. no matter if i choose from the "OS Optimized Defaults : [Win8 64bit]"
I changed the boot priority so that the DVD-Reader is on the highest place (1). Got a working Win8 DVD, also got win7 professional, but i'd rather install Windows 8.
Even though Win7 is okay too if it'll work then.
I don't know what to do other than switching around between all those options. and it doesn't work at all.
Whenever i start the laptop and choose to start with the DVD-Reader it lights up and nothing happens.
I have a Y560 ideapad and the hard disk recently crashed, I did not have enough time to take a backup of my windows copy. I have purchased a new hard disk and installed a fresh copy of windows 7 on it, downloaded all the drivers from the lenovo support website but I really would like to have done the one key recovery on the new copy of windows to set it back to the factory settings.
I have an IdeaPad V570 that experienced a total hard drive failure (be careful how hard to close the laptop in frustration) I had Best Buy try to recover data and opted not to pay for the recovery after the only crucial data did not seem to have been recovered. Best Buy told me the rest of the system seems to be intact so they could install a new Hard Drive if I wanted it back. They made me offers to completely restore the system at a price but I decided to save money thinking I should be able to restore the system myself. So they installed the hard drive and that was it.
I decided to go with Windows 8 after learning that support was beginning to wain for Windows 7. I purchased the OS from Best Buy and I am attempting to install it. So far that is not going well. The BIOS sees the CDDVDW drive and the HDD, both are listed in the BOOT menu with the right names. However the computer is not booting from the WIndows disk. I get a message ending with :
PXE-E61: Media test failure, check cable PXE-M0F: Exiting PXE ROM
At which point it take me to the Boot Menu. I can see the order I have set for Booting is:
It seems to me that the system is trying to boot in that order but the CDDVD drive is not responding, the HDD has nothing on it so it goes for the PCI LAN and there is nothing for it to do so it returns the error an sends me back to the Boot Menu.
I bought this laptop for my son to use and like many, he didn't care for Windows 8. So, I downloaded the drivers for the laptop and then did a clean install of Windows 7 Professional. I have been unable to find a driver that will work for the Network Controller. The drivers you can download on the Lenovo site do not work. This computer is useless to him unless we can get the wireless working.
I just opened my Ideapad u430, and immediately noticed that the windows OS was installed on the 500gb sata drive instead of the SSD. I'm pretty sure the whole point of the SSD portion was to install the OS on it to speed performance. Any tips on how to transfer the OS onto the other side of the partition without having the original discs?
Yesterday, I updated to win 8.1. The process appeared to go smoothly, but I now have a number of issues:
1 If I close the lid and reopen, the sytem does not wake up. It does not wake up if I press the power button. All I can do is a hard shutdown and reboot. This occasionally gives an error message on restart, but has not produced any solutions.
2 There is a message about secure boot not being configured
3 The support app has a cross on it and won't work
No doubt there are other problems, but number 1 is the killer....
I just bought Lenovo Ideapad S110 netbook. It already has MeeGoo OS installed but I want to install Windows 7 32 bit. So I made a bootable usb using Windows 7 USB DVD Download Tool and tried to install Windows 7 using my usb. However I have an error "No CD/DVD driver found" I have tried all three usb slots but there still is that problem. All three slots are USB 2.0.
I have been struggling with installing w8 on my Ideapad z510 laptop in UEFI mode, but neither I could succeed it nor I could I find something that might work. I will clearly explain the case.
Point 1: As I understood, to succeed w8 install in UEFI format, one needs to choose "UEFI First" mode from Boot Menu in BIOS. Then, the source of the boot needs to be specified to identify the rigid path to the documents to load so that new OS could be installed correctly.
Problem1: It is possible to chose UEFI First from boot mode, but it's not possible to choose the USB path for UEFI booting in this case, which doesn't allow you to succeed a UEFI boot to your computer. You can't reach the DVD or USB, where the installation files are, and start installation process.
Point2: Considering the first case, you need to choose Legacy Support mode to boot your computer and reach USB disk or DVD to install new OS on the computer.
Problem2: To succeed UEFI mode booting to the computer, you need to see 4 different partitions on your disk at point of disk selection, where you choose the disk you'll install your OS. However, when you select the Legacy Support mode from BIOS, the disk partition is limited to 2 in my case, which are:
Primary diskSystem reserved (350 MB)Hence, when I continue with the installation, the OS is installed on Legacy mode. After installation, when I go to BIOS to choose UEFI mode for boot mode, the laptop checks some connections from network and says
EFI network 0 for IPv4 failedEFI network 0 for IPv6 failed respectively.
PS: Please don't tell that "you can't install, because your computer doesn't support", because I received the computer from technical service and a version of W8 was installed on it in UEFI mode. However I deleted it to install W8 pro.
My Ideapad S510p has accrued over 10 BSODs over the past 2 weeks. It is totally random, not due to putting it in sleep mode, and apparently is caused by a failure in the ntoskrnl.exe and usbehci.sys.
I have tried looking for malfunctioning devices, and disabled bluetooth as it was apparently not working.
I also installed several new drivers. This solved nothing, and I am at a loss of what to do entirely.
My laptop is ideapad z510 and os is windows 8.1All action and gestures are working in elan touchpad except two finger pad (Right Click)I searched the forum and found that the synaptic driver can fix this problem, but when I want to install it tell me that this system does not have any synaptic touchpad!I test both lastest update from Lenovo and Microsoft for touchpad driver, but didn't solve this problem!
I open this post to report a brightness problem on Lenovo Z500 Ideapad. Yesterday I've upgraded to OS Windows 8.1 and when I adjusted the screen brightness it goes off, and brightness adjust function doesn't works. I've solved my problem reinstalling the Intel video drivers, downloaded from Lenovo Driver Support.
It seems that Windows 8.1 upgrade disables video drivers.
I started using my laptop with Windows 8 and everything was working fine. But then Windows upgraded to 8.1 and now I cannot get the Dolby Home Theater v4 to start, I always get the error message about driver.
I just got couple of days old Lenovo IdeaPad z50-75, running on AMD FX-7500.First I jsut now noticed that my CPU runs at 1.07 Ghz, before it was always over 2 Ghz or so which was good ... but maybe I touched something some where in powr settings or something and now it stays on 1.07 even when cpu pretty much utilised. I have set power plan to high performance and also Energy manager is set to high performance mode and Conservation mode is on. why it doesn't clock itself up ? I feel that it is slower than before.
i am having a problem installing windows xp english version on my compaq presario b1011 which is default in german . when i try to install a english version of xp it hangs in xp logo itself . when i try to install a xp english version i am getting this error
"windows xp professional setup setup was unable to verify c:
your computer may not have enough memory to examine the drives (or) your windows xp CD may contain some corrupt files to continue press enter" this is the error message when i continue to install it installs and after installation it hangs with xp logo . if i try to install with xp german it installs smoothly without error
In a few days I'll get my IdeaPad U310, and since it comes with 4GB DDR RAM, I'd like to do a upgrade to 8 GB. I understand it only has one slot for RAM, so I'll buy one stick of course, but I don't know if it's the same size as used in a desktop PC, or is it some mini-sized RAM stick?
I also need to know the voltage of it, is it 1.5V or different?
Whenever I try to install the ELAN/Synaptics driver that I download from my laptop's support page I get an error saying: no Appropriate Driver to be installed.I'm on Windows 7 64bit...I've tried tons of drivers and I'm starting to get seriously annoyed. Non of them work all of them throw error messages and I'm getting more and more irritated with the obnoxious tap to click functionality. I don't even need the driver as I need the annoying tap to click disabled and maybe some kind of scrolling functionality would be nice if it's possible.
I recently recieved a y410p ideapad I ordered off the lenova website. However, it won't start up. When I try, it brings me to a blue screen with a sad face that says I need to do an automatic repair. This flashes for about two seconds before disappearing and the screen becomes grey and says "lenovo" and "Starting Automatic Repair". From this the screen goes completly grey, and has nothing on it. The computer stays this way for hours and the fan will continue to run. I've tried the reset button on the side and resetting the laptop, but no matter what I do I end up back at that grey screen.
I am new here and to Lenovo products. The IdeaPad Z510 has Core i7 quad core processor which supports upto 32GB of RAM. Can I upgrade the the current 8 GB to either 16 GB or 32 GB? Or it's 8GB max?
The specific model is Lenovo IdeaPad Z510 (59-398016)
I purchased this Ideapad Z50-70 laptop two days back. It was DOS based so I had to install Windows 8.1 OS myself. After installing the OS, I installed all the drivers for this laptop.
The display of the laptop is set to Full HD resolution i.e. 1920*1080. However, it doesn't look as sharp and crips as a normal HD display should be. The text and other things looks blurred. Also, the contrast of the screen doesn't seem well. Though the resolution is set to Full HD, I'm not feeling the quality smoothness and sharpness of the full HD display.
I bought the Lenovo Ideapad Z500 and I'm trying to boot from a USB drive in order to install Windows on it. When I start the boot menu I only see the hard-drive, the DVD and the network. I tried to set both UEFI mode and Legacy mode in BIOS but the USB stick does not appear in the menu when I boot. I put the image of windows with Windows 7 USB DVD Download Tool which formats the stick in NTFS mode.
I have the latest BIOS v1.21 and I tried with 2 different USB sticks: one 16GB USB 2.0 Corsair and with a 32GB USB 3.0 ADATA both on USB 3.0 and USB 2.0 ports on the notebook. I really haven't seen anything like this in my entire career. I even downloaded the file efiootBOOTX64.efi and replaced the one that Windows come with on the specified folder on the USB stick ....
Why is so difficult to choose the USB boot drive on the newer notebooks? How can I boot from USB?
I have 4gb of ram in my model, it is possible to increase the ram of this model? how many memory banks available to me? in case I had 2 I must have to fit a 8gb or 12gb in total I have to take by force from another 4gb?
I've had my IdeaPad Notebook P500 for over a year, and rarely had an issue with it. Today, I accidently touched the F11 key, which happens to be the "Brightness minus" key.
Immediately, the screen went very dim, to the point where it actually hurts my eyes to be typing this.
I can adjust the brightness sliders up and down on the screen, using both the F11/F12 keys and the slider box available from the "Brightness" selection under "Settings". Even though the sliders go up and down, the screen stays the same very dark level.
Windows 8 64-bit is my OS.
I have uninstalled and re-installed the Intel HD driver.
I have shut down the laptop and turned it back on while holding the F12 (Brightness plus) button. It was useless, though.
