I'm having a problem with my IdeaPad Z585 laptop.When I boot it, it clicks exactly 16 times before it goes to a black screen. It does the same thing when I attempt a restart, but it will eventually restart normally after 10 attempts.
View 2 RepliesIdeapad Z585 AMD A8-4500 1.9Ghz
AMD Radeon HD7640
My 11 month old Ideapad failed to boot last night with error 'BL Initialize Library Error 0xc0000029'. Eventually a blue screen appeared saying that multiple start attempts had failed and the system needed repair.
As suggested I tried to use One key recovery but choosing restore to factory settings leads to self same failure.Sadly I have misplaced the recovery disc I created during a house revamp so cannot try that route.
2 customers complained of very slow boot times 2-5minutes on these machines.
Removal of the Msata 24GB fixed it. I have asked them to check if express cache is installed but seems to be an ongoing problem.
What can lenovo do about this? Will replacement of the Msata drives fix the problem or is there a bios update coming which can remedy this.
I just purchased a refurbished Thinkpad Yoga, and all was great for a little while. Then I decided to shut it down and set it aside for a few minutes.
Current Status: System responds in no way other than the 'i' light (in the Thinkpad logo) blinking three times when the charger is connected, or the same when the reset button is pressed while the charger is still connected. Nothing else illicits any sort of beep, light, or otherwise.
I have just bought a new Ideapad Z510 (Core i7 4702MQ, GeForce GT 745M, display Full HD, 1TB HDD+SSD. I have a strange problem: when I connect an external display via HDMI it goes blank after some minutes. THe same display connected via VGA is ok. I have tried two different HDMI cable and the behaviour was the same.
Video drivers for both Intel integrated GPU and NVIDIA discrete one are update.
Lenovo Ideapad z585
AMD A10-4600M APU w/ Radeon HD Graphics @ 2.30 GHz
6 Gb DDR3 RAM
Windows 8 64-bit
Broadcom 802.11n Network Adapter
My network card is on the fritz, to put it simply. I randomly lose internet access, and my network connection is listed as "Limited Access". Sometimes turning off the adapter and turning it back on solves the problem, but sometimes I need to do a full reboot. My system is the only one affected, so I know its not the router. I have already viewed the similar threads and tried the methods advised with no success.
So far I have:
-Updated my drivers
-Disabled Broadcom Bluetooth service at startup
-Disabled Hybrid Sleep
-Told Windows not to shut the network card off.
I did a System Refresh last week and that's when the problem started.
I've a problem with my Z500 (i5/8gb/GeForce 740/1tb)
Its HDD makes clicking sound all the time. Its really annoying.
I would like to know is it normal?
Brand new G50-70: When using OS from the SSD or using OS from the SSD and doing things with a USB-drive, the empty internal DVD-drive making clicking sound and sometimes freezing SSD read/write operation for about 30 seconds but all the time freezing USB-storage read/write operation for about 30 seconds.
When freezing there's always clicking. But when clicking there's not always freezing except when using USB-storage.
OS is Win81-64.
An example scenario: connect USB stick, open terminal, type diskpart, dvd-drive clicks and freezes opening of diskpart for about 30 seconds, then the same may or may not happen when entering commands like clear the stick and format the stick.
Laptop just arrived! However, my N key doesn't work 4 out of 5 times. I have slowed my typing down so I can verify I am pressing the key firmly enough and I am. I have to press it multiple times for it to finally type the letter N.
View 3 Replies View RelatedI have a 3 month old Ideapad z510. Last week, the battery indicator started getting stuck on 100%. So when the laptop is not plugged in, If it's about to die.
View 4 Replies View RelatedMy Ideapoad P500 is approximately 16 months old (so the warranty period is out, obviously!) A couple of nights after a reboot I got the message "Repairing Hard Disk errors. This could take an hour or longer."... or something very similar. The laptop hung up at that message for more than 18 hours.
I did a hard reboot and now get the message "Checking media" followed by the error "Boot failed." This leads to the message, "Default Boot Device Missing or Boot Failed."No I don't have any recovery media.Yes I have pretty recent backups so that is not a problem.I've got an enclosure that I can use to hook my laptop hard drive up to so I can see if the drive is even readable.
Now here is the 64 thousand dollar question... how do I get the hard drive out of the laptop? I have taken the five screws out of the back. At that point, I think the DVD drive should slide out, but it does not.how to get the hard drive out?
I have a y500 Lenovo gaming laptop with Windows 8, and for the past couple of days, each time my laptop is put in hibernation or powered down, whenever I turn it back on it gives me this message:
"Default Boot Device Missing or boot failed Insert recovery media and hit any key Then select boot manager to choose a new boot device to boot or recovery media."
Then it brings me to a page with 3 boot options, and only the Windows Boot Manager works. I'm doing scans and hardware scans but so far nothing is being found. This laptop is less than 2 months old so I really don't think it's a hardware problem, and I haven't downloaded anything recently that may have messed this up. I would contact Lenovo but I'm unsure if this is an issue with the laptop, or Windows 8.
I get the error in the Title after i tried to flash the latest BIOS update for the Z510. I can press ok and then get into the boot manager but i cant choose anything there. Also I cant boot from a Disk with e.g. XP on it.
I also tried the Inside BIOS crisis mode (fn+r) with the BIOS file on my USB drive but it doesn't work and tries to access the file on the USB drive but boots normally instead to the error again. (Couldn't try it with removed battery as I have to remove the whole back to remove the battery on the Z510).
Anyone else noticed these two? I used to run Win7 via Boot Camp, but even turned to max in both software and the OS control panel, volume was always painfully low; never found a definitive fix via Google.
Also, seemed like double-clicking via two-fingered tapping was iffy; sometimes worked, sometimes didn't.
Any way to fix these two? I'm missing Windows 7.
I have a Inspirion N5050 laptop. A few weeks ago, it started running slow and Adchoices ads appeared. I removed them. I ran a scan using AVG, which detected nothing. I shut down the laptop as a precaution. Now it will not load Windows. I press the power button, the dell logo appears, then I hear what I think is the hard drive click, then the screen goes dark for a second, then the logo and a click and so on and so on. I am able to get to the menus with f2 and f12, what to do next. Safe mode will not respond ( I cannot get into it).
View 2 Replies View RelatedI have had a Hard Drive failure apropos of nothing. Could not restart (HP Pavilion 15 230 sa ) would not boot and had a clicking sound. The ID is U0C40K-76U7AE-MFPV61-60UQ03 (some of the zeros may be 'o' s , hard to tell). Can I fix this myself?Lap top is 3 months old.
View 9 Replies View RelatedAnyone else having a X-25 SSD in their Z ?
On vista Business i get a boot time of 38 secs.
So my question is: can I do anything to make it faster? - or is it the best this drive can do under vista
Well my HP dv6000 is still acting up.
Sometimes the laptop will not fully start/load. Meaning it never fully reaches the point when you can surf the net.
When it is not fully functional my mouse will not work when I click on IE or even the start button it can't activate them. It moves but does not activate any icons.
So I'll have to manually shut the lap top down by pushing the power button.
Next time it boots, It may not get to the point where the wireless is not up and running so I can't get IE to run it seems to fall short on booting to that point.
Then I have to hold the power button down to get it to reboot and start again.
Most all the time on the third reboot everything will work fine and run normally.
Time to reinstall my recovery discs and start clean ?
I bought Hp Pavilion dv6 about 11 months ago. When I tried to turn it on today morning, it didnt boot and Caps Lock light is blinking 3 times.I searched on internet and found out that its a memory problem.
View 6 Replies View RelatedI am having some real issues with a Latitude E5420. It will sometimes boot no problem, maybe 40% of the time.
Most of the time it goes to the dell splash screen and the bar goes to the top then i get a blank screen. No blinking cursor or anything. No HD activity, no CD drive activity.
I can press F2 and get in to the bios, i can press F12 and get to the boot menu but even after selecting a boot option from the boot menu i will still get a blank screen most of the time.
Once the Laptop boots up it runs fine and doesn't report any errors. A memory test has shown no errors. I have replaces the CMOS battery, which was a bit of a nightmare, i have replaced/swapped the memory modules.
I've just bought this laptop, and it came with windows 8 preinstalled, and I'm trying to install Windows 7 on it.
I have a bootable usb, which I've used many times to install Windows on my other laptops, but the B590 just wont do it. I feel like I've tried everything. I changed the boot priority order in BIOS with USB HDD as number 1 but it still just boots into windows 8.
I've tried removing everything but USB devices from the boot order, and now I get this boot menu: [URL]
Which is exactly what I want to boot from, but when I press enter to boot from the USB device, nothing happens.
The USB device IS bootable with a primary partition. I've used these steps to make it bootable in DISKPART [URL]
After having no luck on the B590, I tried booting on the USB on a different computer, and it works perfectly well. Starts installing windows 7. So it seems like the problem is not with my usb device.
I even tried restoring the USB drive and using Lenovo Bootable Generator application to make the usb bootable, with the same result.
When I try turning it on the caps lock light blinks 10 times. It doesn't even show the bios screen anymore What could be wrong?
View 5 Replies View Relatedi can't boot on an USB key, the secure boot is desabled and when i press enter to boot on the USB key nothing happen. I had tested with 3 different usb key and 2 different OS. And it work on other laptop i have a lenovo twist... i think its in the BIOS but i had check all options
View 2 Replies View RelatedI have a new y510p I just received this week. First thing I did was replace the 1TB HD with my own OCZ Vertex 4 256GB SSD Drive.When I power on the laptop for the first time, it does not find a bootable device (goes through network devices, then says no bootable devices). If I use ctrl-alt-delete to reboot the laptop, it then finds the drive on its own and starts booting into Windows.
I'd like to understand why this does not work on the first boot? I went into the BIOS and saw it says there that no drives are detected.This worries me slightly, as perhaps one day it will decide to no longer recognize the drive after the ctrl-alt-delete?
I just bought Z50-75 with AMD FX7500, 8GB Ram and FreeDOS. I installed Windows 8.1 Pro, and they pulled some drivers during the installation, and I went to Lenovo sight and downloaded all the rest (graphics, camera, etc.), after each installation the computer restarted normally and all was O.K. The last drivers that I saw on the site were BIOS drivers, and I downloaded those to and it started the installation after which it said:"The system will now restart for changes to make effect", and it did, but, it would not boot up after that, all it did was show me this on the screen:
And I tried both of the options (the second one with the Windows CD inside), but it just stays where it is, no effect.
I can enter the bios and change the settings, but none of them seem to work because this is the maximum where it will go, the only difference is when I change from AHCI to Compatible mode, it restarts and than I have a blank screen, I have to use the One button Recovery to get back to this one from the picture above...
I have disabled the secure boot and changed the boot to Legacy Only.It still doesn't work.I have also tried updating my bios to the latest version using the Lenovo Solution Center.
View 3 Replies View RelatedI got this idela pad U410 about a year ago and it was functioning nornally. A few months ago it started to boot up very slowly when power cycles. A hibernate was quick. Now it never comes up and keeps waiting at the Lenovo screen, no windows. I have seen posts that say it is a manufacturing defect. This one is out of warranty, so what is the solution. Do we have a solution at all? Why does Lenovo market such a bad product. BTW, the back cover is so flimsy that it gave up and had to replace it. Overall a case of bad engineering i guess.
View 6 Replies View RelatedI bought the Lenovo Ideapad Z500 and I'm trying to boot from a USB drive in order to install Windows on it. When I start the boot menu I only see the hard-drive, the DVD and the network. I tried to set both UEFI mode and Legacy mode in BIOS but the USB stick does not appear in the menu when I boot. I put the image of windows with Windows 7 USB DVD Download Tool which formats the stick in NTFS mode.
I have the latest BIOS v1.21 and I tried with 2 different USB sticks: one 16GB USB 2.0 Corsair and with a 32GB USB 3.0 ADATA both on USB 3.0 and USB 2.0 ports on the notebook. I really haven't seen anything like this in my entire career.
I even downloaded the file efiootBOOTX64.efi and replaced the one that Windows come with on the specified folder on the USB stick ....
Why is so difficult to choose the USB boot drive on the newer notebooks? How can I boot from USB?
Just got the y510p laptop and am trying to install Ubuntu so I have this bootable DVD and I wanted to try Ubuntu before installing as usual but I can't get the laptop to bot on dvd. On boot menu options there is only EFI and some kind of network options but no dvd. I tried following instructions here but no matter how many times I press F1 during startup, I can't get to boot menu and windows starts directly: [URL] Is it not possible to boot on dvd. The dvd is ubuntu 13.10 supposedly compatible with EFI and secure boot. I don't understand why there is no option to reorder boot devices like on all my older PCs.
I manage to get BIOS setup pressing restart and shift and then selecting UEFI firware settings and I do get to bios setups but again no way to find the option for booting on a dvd.
I am trying to do a clean install on my good, old Thinkpad X230 which came with 64-bit Windows 7 Professional. For some reason, I was not able to create a bootable media from the recovery partition. In any case, I wanted to avoid the recovery partition as I want a basic, non-bloated, and minimal install.
Hence, I downloaded a copy of 64-bit Windows 7 Professional from Microsoft/ digital river website. After performing the checksum, I used Microsoft's USB DVD Download Tool to make a bootable USB on Kingston Flash Voyager (USB 2.0; 8 GB; FAT32). BTW, just for the heck of it, I verified that it boots on my spare (and even older) Thinkpad X60 -- though it doesn't proceed when it sees that the X60 has a 32-bit microprocessor.
The relevant BIOS values and settings are as follows:
UEFI BIOS Version G2ET95WW (2.55)
UEFI BIOS Date 2013-July-09
UEFI Secure Boot Off
[URL] ....
I am posting this query after trying a number of solutions : rebooting from a USB flash drive on my Thinkpad X230. For some reason, nothing has worked and pressing F12 only shows the ATA HDD0 hard drive. Among other things, I have tried the following:
- Updated the Intel USB 3.0 eXtensible Host Controller driver using Lenovo's Thinkvantage Tools. Now it has version 1.0.9.254. Someone suggested to have at least 1.4.0.225 which is apparently available at Intel's website. I always considered downloading the device drivers from Lenovo to be kosher. Shall I download it from Intel's website?
- Disabled USB 3.0 from BIOS which made all USB ports to act as USB 2.0. Neither option works.
- Tried booting from all three USB ports (of which one is USB 2.0 and two are USB 3.0). Zilch.
- Have yet to try "reset BIOS to default" suggestion as it looked a bit of a last resort.