I comleted a factory restore on my FW, now I cannot connect to the internet.
Network Connections only shows LAN and Bluetooth options. Wireless mecha switch is on, Smartwi utility shows the wireless LAN is on. Of course, status is disconnected.
I can't find any wireless networks around me, including my trusty linksys G that would connect flawlessly prior to the restore.
My laptop was working fine this morning. I took a nap and when I went to use the computer again, it can't find the wireless network. The network icon in the system tray is all gray bars with a red X through them. When I hover over it, the pop up says, "Wireless Network Connection Radio Disabled." Only two things could have changed: my daughter might have used the computer (using a non-administrator account) and Comcast cable might have gone out.
I'm using:
Studio 1458
Windows 7 Home Premium x64
Version 6.1.7601
Dell (Broadcom) Wireless 1520 Wireless-N WLAN Mini-Card
Netgear wireless router, Windows Firewall, Avast free anti-virus (have been using all three for years)
This is what I've tried:
-Verified that cable TV and phone are still working.
-Reset modem and then router then restarted laptop. (This is what I do any time the cable goes out and it usually works.)
-Verified that iPad and iPhone can see network and use it.
-Plugged laptop in through router and can see and use network.
Therefore it has to do with the wireless.
-In Network and Sharing Center, clicked set up a new connection or network and selected connect to the Internet > wireless. No connections available.
-Checked system restore to see if there's a restore point recently that would indicate my kid installed something. (Child of course denies using computer. ) Last restore point was Windows update five days ago.
-Restarted in safe mode, was unable to see wireless network.
-Verified that Device Manager sees wireless adaptor and says it is working.
-Deleted and reinstalled driver in safe mode.
-Deleted and reinstalled driver from latest downloaded version. This also deleted all existing network connections listed under manage wireless networks.
-Turned off wireless phones.
-Disabled LAN adaptor and retried all of the above.
-Tried FN F2 which pulls up an image of two radio towers. The one on the right, that looks like it's a tower without a signal, is highlighted and has a circle with a slash through it over top of it.
-Ran through troubleshooter numerous times.
-Restarted computer numerous times during this testing.
-Went into Windows Mobility Center to turn wireless on but button is grayed out.
In Windows Mobility Center clicked on "launch" under radio control options and selected All the Radios (WiFi was the only one not grayed out).
In Windows Mobility Center, found that the above was still an option so it appears WMC doesn't see that they're turned on.
-Updated the firmware on wireless router.
-Update driver for Microsoft Virtual WiFi Miniport Adaptor
-Manually added wireless network through Network and Sharing Center.
-Verified my antivirus software is working and is up to date.
-Changed security options on router so there was no security. (Of course changed it back.)
How to update the firmware on the wireless adaptor card if there is any.
I still have a gray wireless network connection icon in the system tray with a red X through it. The pop up still says wireless network connection radio disabled. I am unable to connect to the Interenet through the wireless, even in safe mode. This is my work computer (I own my own business) and in order to use the wired connection I have to sit on the floor in a corner. It's very inconvenient, not to mention uncomfortable. (My child does not usually have access to my computer but our home computer is down and I let her use it a few days ago and forgot to turn off the guest account.
Wireless network is deactivated by hp connection manager after hibernating, sleep and sometimes when I use the computer. I can't see any preferences in HP Connection Manager to correct this, or in Windows power management.
What is the solution to keep the wireless network activated ALL THE TIME??
Uinstall of the HP Connection Manager doesn't work, then I can't activate the wireless network again!
My computer:HP ProBook 4530s (brand new)
Windows 7 Pro (included with the computer)
No other power or wireless utilities installed, just HP utilities as installed from the factory.
i got ( vaio , vgn-cr320e ) , i installed win xp but there is some files in the win xp cd are missing so i had to install a win vista ultimate , ( what you have to know is : when i installed win xp , i chosed to format the hard drive ) now when i press ( f10 ) on the win start up , in vaio logo , some balck screen come in it...............
View 5 Replies View Relatedtryed everything to get my network adapter to connect to my network cable. I reinstalled my network driver but the problem remains the same.
how to fix this network adapter issue?
Support guys told me to restore the computer an to earlier time using the System Restore feature, but I'd like to know if there's someething else i could do before that.
Whenever I'm copying files over the network to/from my M6400 Covet, I lose network connection.
I get the 'Limited Connectivity' message in Vista 64. It seems to happen for larger files transfers only.
I have the latest software from Dell already. My solution is to restart the laptop.
I lost the restore partition on the original SSD that my Yoga 13 shipped with. Is there a collection of drivers and whatnot that would allow me to restore it to factory defaults on my own with a fresh windows installation? I have the win8 key from the BIOS but don't want to lose out on all the required drivers if I were to just reinstall windows myself.
View 1 Replies View Relatedi was wondering if anyone else had this issue. My SXPS 16 has an intel 5100, and whenever I do any heavy downloading it invariably drops the connection after anywhere from 5 to 25 minutes. I called Dell up over it, and they claimed that it could not be a hardware issue or it would be dropping the connections more frequently, and I would see the problem worsen.
I know it isn't the network, as my old Inspiron 6400 could handle heavy network use and never had these issues. Yet, my shiny new Studio XPS 16 seems to have difficulty with it.
Anyone else notice anything like this, or have an idea of a fix? I've already tried updating the drivers, which did not fix it.
My new Sony VAIO SR 390 arrived yesterday. When I turn on the computer, restart, awake from sleep, etc, I have to manually disconnect and reconnect to my wireless network. If I don't, I have the little yellow triangle in the tray saying "unidentified network" and the internet doesn't work.
I have turned the wireless switch on and off, disabled and enabled the connection, updated the driver, and changed the power settings in the device manager. All of this has not helped.
Other than that, I have had no problems and I'm very happy with the computer. I haven't noticed the battery drain issue either.
I just reinstalled windows 7 on dell inspiron 1525 and the wireless adapter isn't picking up any connections. When i troubleshoot the error it says 'turn wireless capability on' the switch on the laptop is on but the light isnt showing up on the laptop.
I checked device manager and there is dell wireless mini-card and it says it is working properly.
Wireless on my thinkpad x60s has switched off. I have turned off the windows turning off mode. I have deleted driver and updated driver.
My FN andF5 keys wont switch it on. The system says its working ok but needs switching on. When I try to connect on wireless connection it says " no connections are available".
HP pavilion 15.6 inch screen laptop (15-e084ca), AMD Quad Core A10-5750M and 8650 Radeon graphics, 1TB hard drive, 8 MB DDR3 SDRAM, Windows 64-bit 8.1.
I have a Monster bluetooth HD Clarity micro speaker, a Philips bluetooth shoqbox and a Philips bluetooth sound shooter.
In all 3 cases, I have been able to connect the speakers and use them but the connections are unstable. The laptop automatically breaks the connection. It's happened several times. I have many different versions of this problem.
Once the speaker is disconnected ( either I manually disonnect it myself or the laptop does it on its own) it can be extremely difficult to establish a reconnection.
I own a Z series Z540. After multiple Vista reinstalls and driver reinstalls, the wireless connection always drops. It would maintain connection for about 5 minutes, then it drops again. The wireless light stays on though.
I tried going on XP and ssee how that works out. Same problem, except that it drops when I MOVE it. And when it drops, the wireless light turns off, and when I move it back into a certain position again, the wireless light goes back on, and the wireless is back.
However, when I am on vista, the connection just drops for no reason, even without touching it, every 5 minutes. The light does stay on, though.
I think something similar has been posted here before. In essence, I find that when I use my VX Revolution (or is it MX? Whichever one is the mobile version), the mouse occasionally loses its wireless connection to the computer, and so I have to click multiple times to get it to register.
This is annoying enough for me to consider getting a wired mouse, but I want to know if I get something like an MX518 if I'm still going to run into the disconnect/lag issue.
In other words, is it a wireless issue or a Logitech/PC/Mac conflict issue? I experienced both with and without the Logitech software installed. The software is currently installed.
I'm trying to restore my SXPS16 back to how it was when i bought it using the recovery partition. But when I go to the advanced boot menu the option to do the factory restore is missing.
I know I can do a clean windows install using the CD that came with it but I'd rather just have it the way it was when I first got it.
Does anyone know of a way to fix this, or otherwise, is there another way to do a factory restore?
I am trying to restore my laptop (studio xps 16) to factory settings using the recovery image. If I look in my computer, i can see C and D drives.
D is my recovery partition with 7gb full out of 10gb. This is good and dandy except when i open the D drive, there is one folder that says RECOVERY that is empty. Why is it empty when there are 7gb's of files in there? I already have hidden files shown
Are there steps to be taken before a factory restore - drivers etc?
(Beyond just backing up my data.)
This is an Acer 4530.
my notebook has been shutting off my network connection whenever I close my lid. This didn't start happening until maybe a few weeks ago, maybe even less. I couldn't say if there was anything I did to accidentally cause this, but I certainly didn't do anything intentionally. I've looked through all the network connections properties and whatnot and I can't seem to find a fix.
I'm using an HP DV6500t that I purchased almost a year and a half ago. I have the Intel Wireless WiFi Link 4965AGN.
I have several of these machines (Windows XP SP3) all doing the same thing, will hang at the Windows XP screen. When the user is finally able to log in, maybe after 5 or 6 attempts they will have no network connection.
I have the latest BIOS and network card drivers loaded.
I have an HP G71-449WM HP notebook. It was all messed up and wouldn't let me restore to an earlier point at all so I reset it to the factory settings. I didn't make a back up because there was nothing I wanted to save. I am unable to connect to the internet now, wirelessly or by hooking up to an ethernet cable. It gets an error while going through the initial set up where you set your password for the pc, the time, etc. when it gets to the spot for connecting to the internet it gets an error, freezes up. I turn it off and turn it back on and it just loads like a normal computer, but can't connect to the internet no matter what. I've reset it to the factory settings about 5 times in the last 3 days and am getting the same problem each time. I have no recovery disks or anything.
View 5 Replies View RelatedI have a Aug 2006, Dell E1505, 1.83 ghz, 1 gb ram, ati 256 1400 etc etc + 80gb HDD (note) win XP & media center
for last three year never formatted my system, it was going good... recently some virus attack happend and it made my notebook verrrrrry slow, so i did the famous Ctrl + F11 !!
follow mark mck's bloatware removal, did a hdd defrag for non-c drive.
But my question is, even after everything the system is not running as fast it did in 2006
boot time is ~1min, shut down is 35 odd seconds...
So, my 2 cents say that after long usage, even if you do a factory restore DO NOT EXPECT a out of the factory hardware/speed, all u get is out of factory windows settings and bloatware ((
I am trying to get my Studio 15 to factory conditions but I am running into two BIG problems:
1) When I press F8, I get no option to "Repair Your System"
2) The Dell Vista reinstall disk does not have to option for OS Restore on it
trying to do a factory image restore on my Studio XPS 1640. I've done this before on other Dells but this one I don't see the Dell image restore option as said in the booklet.
I don't see the Dell Facotry TOols either. I just have the following: startup repair, system restore, system image recovery, windows memory diagnostic, and command prompt.
I chose system image recovery and it doesn't pull up anything - it's for my own images I made. No option to pull up my Dell factory image which I still have in it's own seperate partition.
recently got hit with a bunch of trojans when using Internet Explorer. I managed to clean them off or so I thought. Periodically, when I open Internet Explorer my virus scanner detects a trojan.
Since the original trojan screwed up my computer to a degree I had decided to reload my operating system anyway.
If I hit F8 at boot and do a factory restore will this reload the disk to the state it was in when I originally received it? Will this also get rid of these viruses that seem to still be plaguing my system?
I am planning to restore my laptop to its factory default because of some problems like the "Windows Update" window is all grayed out. I tried finding solutions in the net but it doesn't solve the problem so maybe system restore may do it but inst going to remove all the programs, like MS Office? Are the files saved in drive D also be removed? My laptop has MS Office already when my mother bought it. I have Acer Aspire 5730z.
View 6 Replies View Relatedi am trying to restore laptop with restore cd's that was supplied, the problem is that i can get the alt f10 system to work as it just constantly beeps till i let it go. i have read through threads that talk about a recovery partition but not technically minded so i dont know if this has one or how to find it.
View 4 Replies View RelatedI would like to restore my XPS M1530 to factory defaults. I saw on the recovery drive a file called Factory.wim Can I use that file to restore factory defaults? I would like to format the drive and start from new again if possible. Do I need the disks that were sent to me with the laptop or is all of the info on the recovery partition?
View 2 Replies View RelatedI just bought a Vostro 3360 with Win 8.
I created a new partition using Win 8 Disk Management Tool (as shown here [URL] ..... )
When i turned it on again, i saw a message about a failure shutting down the OS. And now i can't start it because it can't fin Operating System. How can i restore it to factory settings?
my computer is a
Inspiron 14R (N4010, Early 2010)
MS Windows 7 64 bit
I got rid of multiple malware problems, but I still don't have sound when going to youtube e.g., as well as can't install anything. Therefore I think the best thing to do is to reset the computer to factory settings.
How to perform a Factory Restore, from the Restore Partition. I'm unable to boot the computer. into windows.
Last time I recall it was CTRL-11 upon boot, didn't work for me.
Windows 8 Pro
Dell XPS 14 Ultrabook