When I plug the headset in, the sound is routed to the headphones, but the internal speakers continue to sound also.
Is there a way to turn off the internal speakers off while listening through the headphones?
How I assume the switch between headphones and speakers should work: I turn on music or anything esle and if no headphones are plugged in, every sound comes from the internal speakers. Now if I plug in headphones then the sound comes exclusively from the headphones. If I pull then out again the sound comes from the speakers and so on.
In my case the situation is the following: If I have no headphones plugged in and turn on music, then I hear if via speakers. If I decide to continue listening to that music via headphones and plug them in, then the music continues to come from the speakers, but for example the notification sound from outlook comes from the headphones. This works vice versa.
If I open, say youtube to watch a video, while having the headphones plugged in, I will hear the sound via them. If I now unplugg them, the speakers will stay silent.
What can I do that if there are no external speakers plugged in (headphones etc.) every sound will be played by the internal speakers, if I plug in some sort of external speaker it comes from them and if I unplugg it it switches back to the internal speakers?
My computer went through a standard update, nothing out of the ordinary and all of a sudden my audio doesn't work. I restart my computer and it works for a couple of minutes and then it stops. Ten minutes later it works again and then cuts off and so on, so forth.
Product Number: C8F10AV
Model Number:
I have Windows 8, 64-bit operating system.
I followed the direct HP support website to troubleshoot the problem and it told me to turn the volume up.
Don't uninstall the Microsoft drivers and try to install the Conexant driver, if this doesn't work, download and install this Conexant package:
[URL] ........
I have no sound, although everything tests fine and volume is changing. No sound from speakers or output to headphones. I have tried all invetigations, everything is OK including Windows Audio, set to automatic.
HP Envy 15 Product Number A9R05PA#ABG running Windows 7 64 bit.
Also, while sitting in its usual well ventilated space it has gone in to thermal shutdown a few times when I wandered off, and froze once on startup. I am now backing up everything ...
loss of sound from my inbuilt M 1330 XPS speakers. Sound working with headphones.
Tried uploading new sound drivers. Did upload and run R171186 and R153908. Didn't work?
Bought a new dv7-2000, custom built. Nothing spectacular
As soon as I received it, I formated the drive and installed Windows XP Pro SP3. So far so good. All drivers installed, everything working.
Except for one little detail : I have sound on subwoofer only, no speaker, not even on headphones, no matter what jack I plug in. Sub does turn off when I plug the headphones though.
I tried several IDT drivers, all act the same.
Also, this solution doesn't work:"All u need to do, is right click Communication headphones, and click Disable.right click Sound button on taskbar> playback devices now you have speakers and headphones selected as default device, and communication headphones seleted as default communication device."The communication headphones have been disabled, but the speakers still play alongside the headphones.
I think part of the problem is that the playback device is "Speakers and headphones", but I can't split this into two separate devices for the life of me. if I disable "Speakers and Headphones" and enable "Communication headphones", the problem fixes itself and then introduces new problems: certain programs requiring sound output do not work, and the volume-changing buttons on my keyboard don't change the volume.
I have IDT High-Definition Audio CODEC (as a driver?).I can't remember what I did before this happened. I suspect it was the audio driver update, but that's a wild guess.
I have a HP ENVY M6 Notebook, after I update my PC, there is no sound at all. It shows no speakers or headphones are plugged in. Also IDT High Definition Audio CODEC was disappear. How can I reinstall it?
View 5 Replies View RelatedHP Pavilion 10 TouchSmart 10-e010nr Notebook PCWindows 8.1Product No. F3F15UA#ABA
When I plug in headphones, the onboard speakers still play.
Is there anything I can do or is something broken?
The speakers on my laptop have stopped working all of a sudden! But the headphones do though there is a low buzzing sound when i use them. When in control plan to look at the problem it tells me they are working. Laptop is only a few months old!
View 9 Replies View RelatedThis problem started after updating my audio driver on my HP Pavilion dv6 7039tx laptop. I noticed that the volume has been muted and a message reads out no speakers or headphones have been connected. After using the windows troubleshooter the troubleshooter detects that "the hardware changes might not have been detected".
I have now already rollbacked the driver uninstalled it and reinstalled it multiple times rebooted my PC too but nothing seems to work. In the device manager it detects my IDT high definition codec devices. I strongly feel there is something wrong in the registry since this is not a hardware problem. Even in the HP Support troubleshooter it does not detect my audio devices. I dont know what to do I really dont want to restore my PC .....
When I plug in headphones into my headohones port, should the main speakers not go to mute?
View 1 Replies View RelatedI have a HP Pavilion dv6-6119tx Entertainment Notebook PC. There is a sparking/cracking type of Noise during Startup & sometimes during usage,which makes it too irritating to listen to songs or other things. My Audio drivers are upto date,tried installing & uninstalling them but of no luck....
View 5 Replies View RelatedI have an HP Pavilion g6-1d73us laptop and although my headphones work properly the speakers do not. This is a recent problem. I have tried troubleshooting with windows troubleshooter with no results. I have checked all the drivers for audio and they check out fine. I have tried driver software with no success. Windows Media Player does not work. I get an error message when I try to use it. What else can I try?
View 2 Replies View RelatedI'm trying to have simultaneous sound from both the headphone jack as well as the internal speakers. I've enabled the concurrent audio via the Smart Audio panel (Audio Director), tried the blue and red buttons (got successful results), but all of the computer sounds still come from the headphone jack.
W520, i7-2820QM, BIOS 1.42, 1920x1080 FHD, 32 GB RAM, 2000M NVIDIA GPU, Samsung 850 Pro 1TB SSD, Crucial M550 mSata 512GB, WD 2TB USB 3.0, eSata Plextor PX-LB950UE BluRay
W520, i7-2760QM, BIOS 1.42 1920x1080 FHD, 32 GB RAM, 1000M NVIDIA GPU, Crucial M500 480GB mSata SSD, Hitachi 500GB HDD, WD 2TB USB 3.0
New thread to satisfy people. I don't know why it makes a difference whether a thread is new or old.
I have a Dell E1505 running XP. The headphone jack works but the internal computer speakers do not. Here's what I know:
(1) it's not the speakers. I've swapped an identical set of working speakers.
(2) it doesn't appear to be a software or driver problem. My settings look identical to those of another E1505, and I have tried re-installing drivers several times.
I've got a Dell XPS 1640. My internal speakers don't work with itunes and most other applications. However, when I ran the Dell diagnostics, sound was produced. Dell tech support told me that its a software problem because there was sound in the diagnostic test.
They checked the drivers etc which are current and recommended that I reformat back to factory settings which is a major hassle. I'm running Vista 64 bit, but do have a Windows 7 update disk which I haven't installed yet. They told me that installing the Windows 7 update wouldn't fix the problem. I've read about disabling IDT (which I've tried) wiggling the inputs e
My speakers stopped working after I dropped the laptop on the front edge (yes clever).
Curious thing is there is a red LED glowing from inside the ear phone socket that I never noticed before. It looks really cool. Anyways I get sound out of the ear phones but not the speaker.
I tried inserting and jiggling the ear phone jack to see if there speakers were somehow deactivated by means of the earphones. No luck.
My next step is to open up the laptop too see what I can find.
I'm wondering has anyone delved into a 5672 (or similar) that could guide me to what to expect.
Mainly I don't want to remove the cover if it means I bollox up the whole thing.
I have a DV6-265us laptop running MS Vista SP2. Recently, my internal Altec Lansing speakers stopped working. First it was the left speaker, then both. I thought for sure the speakers just died, so I ordered a replacement on EBay and just got and replaced it yesterday. BUT, I still don't have any sound. I can plug in external speakers into the speaker port and they work fine.
Now here is the strange thing. The speaker icon on the status bar is working exactly like it did before. Its not showing any red X or error at all. I can test the sound and the visual looks like its working, but there's nothing coming out of the internal speakers. I've gone to Control Panel, Device Manager and there's not red Xs anywhere. The device driver says its working fine, but I didn't trust it, so I did a HP driver restore and put back the original one that came with the laptop .. .Still nothing.
I've read the troubleshooting articles on the HP Support pages, but nothing has worked so far. My next step is either to replace the audio board or the power button board. I'm not sure about the audio board because I don't know how its tied into the speakers AND plugging in external speakers IS working. It's really a sub board and seems to only have the external ports for the microphone and speakers as well as the infra-red port. The internal speakers are plugged into the power button board and I thought that is where the problem might be since putting in a new internal speaker didn't seem to work. The microphone is also plugged into the power button board, but that seems to be working though.
I was trying to connect my laptop to my HD TV so I made the HMDI my default playback but I disabled the internal speakers and now I can't figure out how to get them back on. The sound plays through my tv but when I unplug the HDMI cord the speakers don't play. Im using an HP Pavillion dv7 -3065dx model.
View 5 Replies View RelatedI have Compaq Presario M2253AP laptop with Serial No.[Edited for Personal Information]and Product No.EH049PA. bought in June 2006 and is having Windows XP as OS
The internal speakers were not working and when checked cones of both the speakers are damaged. I need replacement of the entire speaker bar.
I am facing a strange problem with my Inspiron 6400, a tick sound is heard from the laptop internal speakers everytime I press a key on keyboard OR even if I press a multimedia key provided at the front of the laptop. This has never happened before and I am unable to fix it.
The sound starts coming as soon as the system boots up. I have both Vista and XP installed so I get an option to select the OS I want to choose on startup. I hear the sound on pressing any key of keyboard even at this stage before selecting the OS. This confirms that it has nothing to do with the OS but is something wrong at the hardware level or BIOS, which I want to find out and need your help.
Two days back there was a Blue screen with some error (which I couldn't recall) and the problem started after that. It asked me to shutdown the machine to prevent further damage. I forcefully shut it down and then it wouldn't boot until I pressed the ESC key several times. However after that, the system is booting up normally but the sound keeps coming. How annoying it is.
I tried muting the internal PC speakers from Vista/XP but to no avail.
On my W510, I would like to set the volume on the internal speakers to "mute" while setting a different volume on the headset jack, in windows 7
This is so the laptop will not play any sound when the headset is unplugged, but work normally when headset is plugged in.
Normally I can find 2 different audio devices in windows, and control them separately.
Does the thinkpad support this? Do i need special drivers?
When I pause playback of an .mp3, there's permanent white noise coming from the internal speakers.
Stopping the playback stops the white noise after approximately 4 seconds. I never had this issue with any laptop / soundcard. Can this be fixed?
I have the latest BIOS and drivers installed. Headphones are fine (no white noise).
Maybe the inbuilt L440 soundcard has a problem. I had to return my first L440 because there was a loud plop when starting playback and the left speaker was way quieter than the right one.
In the German part of this forum people are reporting problems realted to the internal speaker (cracking sound, white noise).
I have the Vaio VGNCS215J
A ways back, I screwed up my headphone jack & moved to headphones w/ the USB Connection & ever since, it has been 1 headache after the other.
They`ll work fine for awhile & then everything gets played w/ a higher pitch garble. This happens w/ my ITunes, Youtube etc.
I have disabled & re-uploaded the audio drivers & it works for a few minutes & then back to the same warbling racket. Also, lately Ive noticed that I can be listening to nothing & I can hear crackling coming out of my headphones.
Has anyone been able to use the Motorokr headphones with a Vaio notebook? My Vista VGN-FW465J/B doesn't see the headphones when I put them into discovery mode.
View 6 Replies View RelatedI decided to do some investigating about the differences between them. What sparked this curiosity was the consistently higher temperatures I got with my new CW. Turns out the cooling design is a little different.
Not the best pics but hey this science project was done at 3am
New on the left, old on the right:
Old CW:
New CW:
And a pic side by side just for kicks
I think I'll be adding some thermal paste to my new CW. which one? I gotta research how to do all that stuff.
I think I need to replace my 4965AGN on my SZ71WN/C as my laptop will loose connectivity with my router for no reason. I get the dreaded unidentified error and the only way to resolve the issue is to reboot my laptop. This was happening even before I upgraded to Win7. Even on a vanialla Win7 install, with no antivirus, it happens. You could ask if it's my router (Netgear DG834GT), but another Vaio SZ that I have works fine....
So has anyone changed their WIFI module and if so, should I upgrade to one which is WIN7 compatiable out of the box?
They look so out of place to me imo, kind of turns me off. But then I hear people say it has such a nice design. I think the speaker "bar" kills it :
View 9 Replies View Related