Just upgraded the WiFi card from 6200 to 6300 AGN in my new Z
Also, I used the Mini PCI-E WiFi Antenna from ebay:
2x MINI PCI-E Antenne Wireless WiFi 802.11N A/B/G/N AGN bei eBay.de: Komponenten (endet 20.05.10 22:20:07 MESZ)
Antenna fits nicely into disassembled/"lightened" Lenovo UltraBay III adapter and can be bolted with a small screw so it is completed fixed.
I recently bought a centrino 6300 wifi card from ebay with the correct FRU (60Y3233) from a centrino 6205. The new card detects networks but it cannot connect to the networks.
View 6 Replies View RelatedThanks to a post by PDSway, I got the Intel Centrino Ultimate-N 6300 Advanced Wireless Card working fine with the Windows 7 64-bit 13.0 drivers on my XPS 1340.
Has anyone been able to successfully install the Intel Centrino Ultimate-N 6300 Advanced Wireless Card 13.1.1.1 drivers for Windows 7 64-bit?
I get an error code saying it couldn't find the digital signature for the driver
seeing that Dell released a driver supporting 6300, I went and bought one to replace my 5100. Plugged it in, and it wasn't recognized. Fair enough, I went to reinstall the driver.. which immediately finished. Setup log said error discovering intel device, or something like that.
Problem is, the device is working fine as far as windows is concerned - it is detected, I can connect using windows networks screen. But ControlPoint Connection manager does not see it.
What am I missing?
I am very interested in purchasing a new Sony L series ( all in one ) computer that comes with Windows 7 Home Premium installed
View 3 Replies View RelatedI have a sony vaio VGN-FZ470E model and I was wondering if it can be upgradable to Vista Ultimate x64.
Are there drivers for this model, if yes where would I be able to download them.
VAIO Z ULTIMATE UPGRADE PROJECT
I am starting a massive update project on my Vaio Z now that I have collected all the necessary parts. My Z is a VGN-Z27GN and the current configuration is with a 2.53GHz CPU, 4GB RAM, BluRay burner and a 16GB Mtron Pro 7000 Solid State Drive (when I originally ordered it I a couple months ago I had the standard 320GB hard Disk replaced with the SSD). Though it's only 16GB it works for me as I only use it for the OS itself, all my data and files are on external disks.
My current upgrade project now that I've gathered all the parts is:
- X9100 3.06GHz Extreme Edition CPU
- Kingston HyperX low-latency DDR3 SODIMM 4GB
- Solidata X1 SSD 32GB (currently the fastest 240MB/s read, 220MB/s write SSD)
I am posting here a brief benchmark set on Everest with my current configuration and will after the upgrades repeat the tests. I am running Windows XP SP3. Boot-up takes approximately 14 seconds and overall as it is the system is extremely fast and ultra-responsive. As you can see by both the base system's performance and the current Mtron SSD, the numbers are really good as they are.
So, I am eager to see the tests results after the upgrade is complete.
Here's my dilemma:
I have no clue how to open the Vaio Z and get the CPU or the SSD inside (replacing the RAM is obviously a no-brainer). So, I would like to request help (ideally a step-by-step thing) on how to crank the Z open to access the CPU and the HD compartment. I do not have the faintest clue on how to do it.
I recently purchased the new VGN-Z690 and thought i would save some money by ordering it with the Home Premium (64bit) OS since I already had Vista Ultimate disks. I went to do an upgrade by installing the Ultimate disks, but the option to upgrade was greyed out.
The only option was to do a clean install, which I want to avoid due to all the other software that is on it already.
I got my laptop this morning, and I was practically overspeeding (well, not really) just so I could go home and do my thang with it. So when I got home, I updated it to SP2 (since I restored it before sending it in for repair) and did the miscellaneous software tweaks I could think of as yet.
And then, it's time for the CPU Upgrade! Wooooooot!
I. Introduction: How was my laptop (dubbed Ciel Noir v1.0) before?
Originally, my notebook came with an Intel T5800. Undervolted at 1.0500v, it ran cool enough at 2.00GHz, and I thought it had a busted thermal sensor since only the ACPI layer temp was working, and the Core 0 and 1 would show anomalous temps of either 4C or 20C or something lower or a bit higher.
Last month I ordered a T9600 from eBay (2.80GHz, 1066MHz FSB, 6M L2 Cache) and I only had an opportunity to install it today. Let's move on.
II. Tests for the T5800
I ran a test on how fast the T5800 boots from the Vista progress bar until when it loads www.yahoo.com (my homepage). Here's what it got:
Test 1: ~ 1:32.01
Test 2: ~ 1:31.00
Test 3: ~ 1:31.95
Sadly I didn't get the chance to record it since the phone I was using for timing it was the same phone I would have used to take a video of it. (My mom is in Singapore and she brought our vidcam lol). So I guess, an average of one and a half minutes is a good baseline.
III. Disassembly, my favorite part
So after I got those times, I shut down the laptop and then got on with disassembly! Yeah~~
I was helped by a service guide I grabbed somewhere, but it shows a Travelmate 4730G--but it kinda looked like (and had the same specs) as my 4630G, aside from three extra screws and an inverted LCD screw assembly (as far as I got into it lol)
So no more waiting, here are the photos:
Here are snaps of when I had the T5800 still inside:
The core temps are inaccurate--like I said I think my mobo sensors are turned off or something.
Here's when I already removed the HDD, RAM and the WLAN board:
BTW when you remove the battery pack, there would be five scews (seven in m 4630G) that yo should take off to remove the switch covers..........................
I used a Windows 7 Ultimate 64-bit installation DVD to replace Windows 7 Professional 64-bit on my Elitebook 8740w. In the end, I used a clean installation as the upgrade option ended up with a fail error. However, after doing the clean install, it can't detect any wifi. What drivers am I likely to need to download and re-install?
View 8 Replies View RelatedI have Windows 7 (64-bit) ultimate edition. I have downloaded and installed WLAN drivers from HP site. But the adapter still fails to detect any avaialbe wifi connection. It still shows the red-cross on Networks icon in tray. My wifi is WPA2
While installing drivers, for WLAN, the installer closes itself in the mid of installation. I have already installed
Intel chipset installation Utility and driver (2014-01-03 , Version9.4.0.1027, 5.48M) and
Realtek RTL8188EE 802.11b/g/n Wireless LAN Driver (2014-01-08 , Version2012.6.1218.2013, 32.02M)
Download link: [URL] .....
The WLAN adapter is in working condition as I was able to connect wifi in Ubuntu linux...
I tried with older version, the driver gets installed but with connection, no luck....
I had replaced mobo on my dead SZ 4 series (don't ask why) and couldn't stop there since I was in the move thus consequently contemplated about possible upgrades. For now I settled for fan, WLAN card and CPU upgrade. If it works well, I might install SSD also.
1.Fan Modification
As you all proud SZ owners know, fan is very noisy on this machines so it made me think if there is any possible modification to reduce the noise. Since the BIOS is controlling it there is not much to do on the RPM part (in win at least, but more on that later) I settled for a fan and fan casing swap from SZ 4 to SZ 7 series.
In the photos you can see that fans, fan casings and heat-sinks are of different design. Besides design differences, voltage and the amperage are the same, 5V-300mA.
Only way was to install the fan and the casing of the SZ 7 heat-sink to my old one as one of the heat-sinks bolt bushings is off for a few millimeters.
There has to be some care exercised when prying off the fan casing, some heating was required from the aluminium side on three pins were casing is attached.
Not to be simple, the difference is also in the inlet hole. One on the SZ 7 heat-sink is bigger and off centre compared to SZ 4s. Had to do some filing there, to match it to the size of the new fan. Fan of SZ7 is not bigger, it is due to different design of the fan eye and its volutes...................
My laptop model is Acer Aspire 6920G.I use Vista Home Premium SP1.If i install Vista Ultimate SP1 will my drivers which i backed up on 3 DVDs work when I install them?
View 5 Replies View Relatednote: my process below is for Australia where we do not have access to Microsoft's online AnyTime Upgrade for Windows products...
I'm in the process of purchasing a Dell Vostro 1310 on behalf of a family member who's just started University (College)
I've configured the one we want into a shopping cart at the Dell Store. However, it only comes with Vista Home BASIC included. I can upgrade it via Dell to Business or Ultimate for a further $237. I would rather have Home PREMIUM but Dell does not offer that for Vostro as it's a "business" system. That's fine. But Home Basic is not suitable.
Here is what I'm planning and I want to run it past the experts here before going ahead.
* Purchase the Vostro 1310 from Dell with HOME BASIC included in the price.
* Purchase ULTIMATE UPGRADE for $80 from MS via offer for ADDITIONAL PRODUCTS at the itsnotcheating.com.au site.
* Take delivery of the laptop from Dell with HOME BASIC pre-installed
* Use the ULTIMATE UPGRADE to do an in-place upgrade of the the pre-installed Vista HOME BASIC to ULTIMATE...
I'm one of those people that purchased a notebook during the free Vista to W7 upgrade period so I'm eligible for the no cost W7 upgrade. However, I would also like to additionally upgrade from Home Premium to W7 Ultimate now that it's available.
What would be the most efficient and economical route to combine all these upgrades and include a student discount? Is there a way to do this so that I only have to upgrades once?
In support of a project I'm doing, I removed and disassembled the LCD.
I'm going to take more pictures before I reassemble it.
i finally able to install the secondary hard drive on my Z570 replacing the DVD drive in it. item that i use are:
1. Mini-sata to sata converter from newmode usa ( the 9.5'mm);
2. cushion foam;
3. Samsung 320GB hdd with 8Mb cache;
4. hard drive screws;
tools that i use:
1. precision screwdriver;
2. double-tape;
3. drill;
4. tweezers;
5. insulating tape:
5. power glue;
I'm still working on the how to guide but here is the pictures of the second HDD in my vaio
[img=[url]
If you have the glossy carbon fiber version, try waxing it.
I taped off a section of the lid to see before and after results. After that, I applied 3 coats of wax.
Pretty compelling:
I used Dupont Teflon car wax.
I have an HP Pavilion dv5 that cam,e with Win 7 Home Premium. I have upraded the OS to Win 7 Ulitimate.
I now am going to sell the dv5 and want to install the Win 7 Ultimate Upgrade on a different computer. Do I have to deactivate the Win 7 Ultimate upgrade license, or can I just restore the dv5 to factory condition using the Recovery Drive .
And then just install the Win 7 Ultimate Upgrade on another computer?
I'm just looking for information / opinions on how to get the best deal for an upgrade to Windows 7 Ultimate.
I purchased my Dell Latitude E6500 direct from Dell USA Small Business on 2008-11-04, and shipped on 2008-11-21. It was pre-installed with Windows Vista Ultimate.
I've seen that systems purchased more recently (~June or July) qualify for a free upgrade from Vista to 7. I'm guessing there is nothing to qualify me for such a free upgrade, but considering that I haven't even had this system for a year yet, should there be any other upgrade discounts or specials available - either through Dell, directly from Microsoft, etc.?
Especially with the scores of users who claim that Windows 7 is really just another service pack to Vista, and with Apple offering their latest OS upgrade for a mere $29, I would certainly hope I'm not looking to pay the $219.99 as listed at http://www.microsoft.com/windows/buy/default.aspx - the same price as if I had never purchased Vista and upgraded a 7-year-old XP installation instead.
We have a Latitude E6330 that was brought over from Japan running Windows 7 Professional.
The new user wanted teh default language to be English but still be able to use the Japanese characters on the keyboard as needed and so a copy of Windows 7 ultimate was installed on it. This achieved the goal of changing the primary language to English, but due to the fact that this was a US version of Ultimate and the original OS was Japanese, it did not due an upgrade but instead did a new install.
A side effect of this is now several Japanese keys are not recognized by the computer. Is there a driver or something that i will need to install for those keys to be mapped properly? I thought Windows would automatically recognize the Japanese keyboard.
Good news for people thinking of getting the Vaio Z but still cannot decide which resolution to go for (1366x768 or 1600x900). I've got some pics that should help you guys out. Unfortunately, I do not have any side by side comparison photos between the 2 of them.
One thing to take note of is that for both Vaio Z, all the setting are in their "default" values (Default screen resolution, 96 DPI, etc.)
For all the pairs of photos:
Left - 1366x768
Right - 1600x900
Windows Vista Section
Below are the Windows Vista boot-up screens:
Below are the Windows Vista login screens:
Below are the Windows Vista Desktop screens:
Below are the Windows Vista Desktop screens with the "Start" buttons activated:
I bought my M90 2 years ago when it was favourable in comparison to the then top of the line XPS. I preferred the screen and it looked much better IMO. So, now I'm looking for a new machine possible. Is there anything comparable to the 1730 in the Precision line?
View 15 Replies View RelatedHi, the Precision 6300 is out in Norway, but only with the FX 1600 graphics option yet.
But you can opt for the x7900 extreme cpu..
I've been reading the forums for awhile and recently just got Windows 7 Ultimate 32-bit. I ran the upgrade advisor from Microsoft.com and like many others I have the issue that my graphics card is not compatible with Windows 7
View 8 Replies View RelatedIs there a a guide or a faq for brining Z698Y from Vista Ultimate 64bit to Vista Ultimate 32bit? I'm looking to do a clean install but with out loosing any key VAIO controls / drivers
View 6 Replies View RelatedI just installed Vista Ultimate on the hard drive partition of my Sony Vaio Notebook (VGN-CR4000). The other partition has Vista Home and is working fine as it came with the original laptop.
I am not able to see any wireless networks to connect to the internet on the Vista Ultimate OS. This is because I do not have the drivers.. right?
I tried to find drivers on the Sony website, but there are none for my model. What can I do?
Just received my new CTO Z-690 today with vista home premium (64 bit), and to save a little on cost, bought an OEM Vista Ult 64bit separately.
Now I'd like to install vista ultimate instead and i just want to make sure i have the steps right.
1. backup/create recovery disks just in case something messes up.
2. install vista ultimate, wiping out everything
3. install drivers from sony's website
lastly, 2 questions
1) since my current drivers are for vista home premium, i will have to download new ones regardless right?
2) is there anything else that i should be doing?
which one is faster to use on the Sony AW series..
I'll be making Blu-Ray disc, Audio CD's, and DVD's..
There is no driver for Vista Ultimate on Sony website..
No webcam, wireless, burner, graphic.. etc..