Sony :: Vaio Vs. Monitor
Jul 16, 2009
What is wrong with my vaio VGN SZ 484N? Everytime I plug it into a monitor, the monitor has a pink screen. All the monitors including my new Bravio 32 inch TV/ monitor cannot have a problem. It must be something to do with the vaio settings for the monitors I plug into?
I have tried all the display setting bits and pieces and nothing helps. If I reset or tick white balance reset on all the monitors contols it is fixed whilst I am holding the button and then reverts to pink screen when I release. Definitely being determined by the VAIO.
View 3 Replies
ADVERTISEMENT
Mar 16, 2009
I'll just list the details below, kind of says it all. other than the fact that I am going crazy trying to getthe back light to work under Windows again.
Sony Vaio PCG K23
Raedeon IGP 345M video card
Monitor works up until Windows loads.
Monitor works when running Ubuntu. Repeated 3 times
Monitor works when at C: prompt.
External monitor works when plugged in to port.
If I look hard enough I can see my desk top on the screen so I know it’s there
Have run System Restore 6 times from restore disc that were made on first use.
Have run System Restore 3 times by pressing the F10 key.
BIOS was still at default values, but I reset it anyway
Windows XP Home SP2 and is completely up to date.
All drivers are as current as I could find.
Windows indicates all drivers are working properly.
Refresh rate is at 60HZ.
I know the monitor works as it works fine with Ubuntu. However I cannot run one of the primary applications
I need to use under Ubuntu so I have to have Windows loaded.
View 13 Replies
View Related
Apr 8, 2010
When I attach an LG 22" 1920x1080 monitor it eventually starts to slow down. Video won't load properly, the mouse starts jerking, etc. This is the secing F-11 I've had this issue with. I don't see memeory leakage but I have 8 gigs of ram, I loaded drivers carefully, and checked each, but the heck of it is that the laptop works perfectly when I remove the monitor. Could it be the monitor itself? It works with my SR & AW. Both are Vista machines though.
View 8 Replies
View Related
Mar 29, 2009
I've got a Sony VAIO Z690. I'm trying to connect it to my Westinghouse L2410M monitor - it is a 24" 1920 x 1200. Connection is through HDMI.
I've got it running at native resolution, but the text on Windows and applications look blurry. Colors also look dull.
Strangely, when I played a 1080p movie, the quality seemed ok. But once I closed the movie, the text is still blurry and the colors are dul
View 10 Replies
View Related
Jun 11, 2009
I just bought a used but fully working Vaio VGN-FW11e with a cracked screen (got it for a good price). The lcd-panel had been removed but the lid is intact. The cracked screen didn't bother me since I planned to have it permanently hooked up to my projekter using the VGA-output.
The problem is that it doesn't seem to turn on the VGA-out before Windows has loaded, i.e. it is impossible to see the POST/loading of BIOS. When trying to restore Windows to its factory settings (since the old owner had left all his files and folders all over the place) using the Vaio Recovery Center something went wrong and now I'm left with a dead system.
When turning the computer on I can hear and see what seems like a proper POST, i.e. the hard drive spinning, the dvd drive spinning etc. But a few seconds after start, when it's supposed to start loading Windows it just stay still, most likely with some kind of error message.
I desperately need to be able to activate the VGA out during BIOS to be able to reinstall Windows. According to Sony this is not possible. But it sound almost silly since every other laptop I have had has been able to output a picture to VGA directly during POST. Is there some way since the obvious Fn-F7 doesn't work?
View 6 Replies
View Related
Aug 2, 2009
I just submitted an order for a new vaio z and while waiting for it I thought I'd look into getting a nice external monitor for home use. After reading through the forum, I can't find any report of a vaio z owner successfully attaching an external monitor with a resolution of more than 1920 x 1200 (due to no dvi-dl compatibility). Specifically, I was hoping to get a 30" 2560 x 1600 monitor.
Is it safe to conclude that it is impossible to connect a 2560 x 1600 external monitor to my new vaio z?
View 10 Replies
View Related
Jul 26, 2009
Trying to get rid of these questionably useful programs -- but I don't see entries for them in add/remove programs in the control panel (or for any of the other useless VAIO software packages that come on OEM machines sans "fresh start")
View 5 Replies
View Related
Mar 4, 2009
I recently just purchased and received a fancy Dell e6400 from one of the many dell deals. My eyes are light sensitive from looking at many computer screens over the years and due to this I avoid LCD screens and much prefer flat CRT monitors. My goal is to use the e6400 as my workstation computer while using the VGA out to power my 19in Sony CRT .....
View 6 Replies
View Related
Feb 10, 2010
i dissasembled my presario cq60 and when i put it together the monitor won't activate.
i tried using an external monitor and the monitor refused to turn on from standby, a safety feature of the monitor. the small card in the underneath with 2 wires leading 2 the monitor, (i assume that is the laptop version of a graphics card) is fine, inserted properly, and i had a slight issue with the plugs fitting, but that was soon resolved.
View 3 Replies
View Related
Mar 17, 2009
I just bought 22" LCD monitor (LG m2294A). It has HDMI in, DVI in, and VGA. I tried connecting my Vaio SR to it with an HDMI cable. Sadly, it didnt work, the monitor displayed a message saying "out of range". In the monitor's user manual I later noticed that HDMI-PC mode is "not supported".
It does however support DVI-PC mode. So my question is, has anyone tried using one of those HDMI-DVI cables to connect their SR's to a DVI monitor? I have read online that going from HDMI to DVI isn't as simple as going from DVI to HDMI. I would really hate to have to connect to the monitor via VGA since I want to get use out of my HDMI out. While I wait for my cable to get here, I would like to read about your experiences in the matter.
View 5 Replies
View Related
Oct 21, 2009
I want to buy an external monitor for my sony z590. I was wondering what resolution the graphics card on the laptop can support. I want to maintain the same 16:9 aspect ratio, so i'm looking at monitors with 1600x900 or 2048x1152.
Does anyone have any experience with this? The only reason I'm looking at the 2048x1152 is because I want to have the same clarity and sharpness on the monitor as I do on the laptop screen.
View 4 Replies
View Related
Jun 28, 2009
if I have a 30" Monitor lying around the house, will I be able to use the screen to its native resolution (2560 x 1600) or will it only max out at 1600 x 900 or 1920 x 1080 (1080p)?
View 7 Replies
View Related
Jan 27, 2009
I have an HP DV 6000T. I just bought a HP Elite M9510f Desktop from HP.com, and I don't have a monitor yet, so I am trying to connect my Desktop VGA to my Laptop VGA in and use my DV6000T as a monitor.
I also have a Sharp TV which I tried using as a monitor but the thing keeps flashing the Power and OPC lights and won't let me see anything.
Anyway I can make my Laptop monitor work with my desktop for the time being?
View 4 Replies
View Related
Jan 17, 2010
I'm looking to get an external monitor for my z series.
1. Is it best to get an HDMI monitor - what are the advantages over a standard monitor?
2. Will the graphics card be able to power more than my current 1600x900 res?
3. I'm looking for a good 21-24 inch monitor, thinking about Samsung,
4. I'm assuming running dual monitors is out of the question?
View 9 Replies
View Related
Feb 27, 2010
I just picked up a Z laptop. Got the docking station the VGP-PRZ1. The dock has a vga and DVI connector. When I connect two monitors to the dock the software will only allow me to turn one on. I get an error "this gpu only supports a single display"
Does that mean I can not use 2 external monitors?
View 4 Replies
View Related
Aug 5, 2009
I am trying to use an extra monitor at work (in extended desktop mode, not clone mode) so that I can use by the laptop's display and the extra external display.
The external monitor is 24" with native resolution of 1920x1200. It works great when hooked to my desktop or other machines.
When I hook it to the laptop, it becomes fuzzy and slightly blurry. Not horribly, but enough to hurt your eyes and make you not want to use it. Anyone had this problem? I've tried several different cables to eliminate that as an issue, but like i said - it works fine when hooked to my desktop.
View 5 Replies
View Related
Mar 25, 2009
I just ordered a Vaio Z590 and am deciding what monitor(s) to order to go with it.
Specifically, I was wondering if it would drive a 30" monitor (2560x1600). The 9300m graphics card specs appear to support it, but I've heard that the Z supports only up to 1920x1200. I'm getting the docking station too,
If not, I was thinking of dual 24", but I've read that no one has gotten the Z to work with multiple external monitors either; is this true? In another post someone recommended the Matrox Triplehead2Go, but that doesn't appear to support 2 external monitors at 1920x1200 resolution + the internal screen.
View 3 Replies
View Related
Feb 13, 2009
I have 2 identical VAIO laptops. Sorry don't remember the model. If important
I will check when come home. But they are last year model core 2 duo.
Silver ones
One of laptops fall down. The screen is not functionning (just all kind of lines).
It goes to windows prompt( I can see background of login box.
When I connect external screen, there is no output signal.
First, I thought that something is really wrong with the board. FN F7 make no changes.
But I decided to connect external screen to my second identical laptop.
And it not gives any external signal. But when I login to windows I can switch to external with FN F7.
Looks like F7 is managed by software inside the Windows.
Logically output from the laptop should be during the boot.
What are my options? Don't want to put a nice hardware in the garbage.
View 10 Replies
View Related
Apr 18, 2009
Does anyone have a link to a website or PDF describing how to properly open and disassemble a VAIO VGN-SZ75GN?
I have a VAIO VGN-SZ75GN, bought about 8 months ago, and now I want to exchange the built-in hard-disc with a solid-state disc.
I need some guide with illustrations/pictures, how to reach the disc
View 3 Replies
View Related
Jan 15, 2010
I have just been given a VAIO PCG8A2M (GRX316MP) , i was told "it's broken but if you can fix it yo can have it" so having a quick look at it there's no sign of life on the display but the lights come on and i can here the HDD heads moving about.
Looking a little more i found that all the ram is missing , so now im not sure if its worth buying some ram to see if it works or not ? The lack of ram would prob explain the lack of display but i wonder if i should be getting POST beeps at least, which im not.
So my question is if a VAIO had no ram should (if all else was working) it be getting POST beeps ?
View 4 Replies
View Related
Feb 25, 2009
Just performed a successful XP downgrade on my Vaio Z520, but have noticed that on this copy of the Vaio Silver Desktop Theme/Appearance doesn't exist.
I had it on my SZ and loved it over the XP Blue. Is there a way to get it back? I still have the restore discs from the SZ.
View 4 Replies
View Related
Jul 4, 2009
I don't know whats the diference (besides the price), between VAIO TZ295N & VAIO TZ395N. Specs in all the websites I've checked say they have exactly the same components: Intel coreduo 1.33Ghz 2GB RAM DVD-RW and 64GB SSD Hardrive. I was wonder if the diference might be in the hard drive interface, with the TZ295N being PATA and TZ395N being SATA.
View 3 Replies
View Related
Mar 27, 2010
I'm wondering if the Blu-ray optical drive (Panasonic UJ-232A) of the (old) VAIO Z series will be able to fit into the (new) VAIO Z series? I would really appreciate it if anyone is able to answer my question.
The reason I'm asking is because I'm seriously thinking of selling my VAIO Z690 & just buying the base Sony VAIO Z (VPCZ112GX/S). I may just be able to afford that base model & the icing on the cake will definitely be the UJ-232A drive being able to fit into the (new) VAIO Z series & work.
View 7 Replies
View Related
Mar 22, 2010
Am planning to get a sony laptop for me. The design simply rocks I am getting mixed reviews about cw and E series. But i made up my mind to get one.
My budget is aroung 40000rupees. Thats around 800$. So suggest me a better one between these two for occasional moderate and less(mosltly) demanding games. I dont care whether its 14 or 15 inch.
Am looking at lower end versions of both the models.
Only difference is CW uses Nvidia Geforce 310 and the E series uses some Radeon 5000 series one. CW has 14 inch screen whereas E series has a 15.5 inch screen. In the models which i am looking at both have matte finish and both has WXGA:1366 x 768 VAIO Display.
which one should i go for. whether the screen quality will be on par to Inspiron one atleast? ( I dont need HD).
View 10 Replies
View Related
Apr 9, 2010
im planning on using the laptop for videos, photoshop and a bit of gaming, maybe even a bit more gaming :-)
The Vaio F Series only has 330M Nvidia Graphics Card with i7QM and up to 8GB of Ram and up to 256GB SSD.
The E Series has ATI 5650 (a less powerful version, reduced clock speed) combined with a i5 520M with up to 6Gb of Ram and up to 500GB of HDD ? Why can i not choose SSD ?
View 10 Replies
View Related
Jan 2, 2009
if I can use the AC Adapter of a Vaio TT on the Vaio Z. The standard AC Adapter that comes with the Vaio Z is of 19.5V and the one for the Vaio TT is of 16V, which I don't know if it's enough for the Vaio Z to function properly or if there could be any problem or damage. Both machines have batteries of 10,8V.
I have an undervolted Vaio Z by the way (last multiplier at 0.9875) so I don't know if this could help in any way for my Z to work ok with the TT AC Adapter.
View 4 Replies
View Related
Jun 30, 2009
I'm debating what LCD monitor to get between
20" 1600 x 900
http://www.newegg.com/Product/Produc...82E16824005128
and
23" 1920 x 1080
http://www.newegg.com/Product/Produc...82E16824005125
I know that i'll have a better performance with the 20" since it's using the lower resolution but how much of a decrease in performance would i see if i hooked it up to the 23" and it's native resolution? I'll be playing some what intensive games.
View 6 Replies
View Related
Sep 30, 2009
Sony Utilities DLL
Vaio Entertainment Platform
Are they even needed when upgrading to Win7 RTM x64
View 10 Replies
View Related
Feb 10, 2009
I have this "problem" since I got my Z. When I start vaio update 3 utility I get this error "messageID=0008" there are no updates for your model bla bla...
However when I go to vaio support page, there are some new updates for my Z590N model (new Bios, USB patch...)
I have downloaded new version of Viao Update utility 3.2.something but I had to uninstall my current version (3.1.something), which I did. However when I started this new setup message poped up "there is no previous version installed" - abort.
I have checked esupport page where is said if you have problems with Vaio Update 3, to download Sony Shared Library which suppose to contain vaio update utility), I run installation but it doesn't install Vaio Update 3
Now, I can live with this esupport page regular visit updates,
View 4 Replies
View Related
Dec 17, 2009
Whats the major difference between 16.4" VAIO Display (1600x900)
and 16.4" VAIO extra-wide HD display (1920x1080). Upto what angle I could see my display in VAIO Display (1600x900)? Can I watch HD movies perfectly in VAIO Display (1600x900) ?
View 4 Replies
View Related
