Sony :: Vaio Z Blu Ray Swap
Mar 14, 2009i have the vaio Z 13GN Highest End asian config without the blu ray drive. Can you guys suggest the model number for the Blu Ray drive and where i could buy it from and replace in my Z
View 8 Repliesi have the vaio Z 13GN Highest End asian config without the blu ray drive. Can you guys suggest the model number for the Blu Ray drive and where i could buy it from and replace in my Z
View 8 RepliesI replaced a fan on my Vaio VGN-SZ320. Everything works normal except for the sound. THe internal speakers do not work however the headphone jack does.
I have replaced the following : both speakers, the ANL-66 board, and the FPC-36 cable.
it would be possible to switch my 160gb 5400rpm hybrid ssd hard drive from my sz650 to my sz440, which currently has 80gb 4200rpm hdd? would it be worth it in speed/capacity? i dont see a problem w/ doing this but wanted to get confirmation.
View 5 Replies View RelatedIs it possible to swap out SSD with standard 2.5" hard drive in the Vaio Z if it's configured with the optical drive + 128gb SSD?
I'm thinking of putting in a 640gb or 500gb. I know the Japan models can do this but they also get 1080p which we don't have as a CTO option
Trying to get rid of these questionably useful programs -- but I don't see entries for them in add/remove programs in the control panel (or for any of the other useless VAIO software packages that come on OEM machines sans "fresh start")
View 5 Replies View RelatedDoes anyone have a link to a website or PDF describing how to properly open and disassemble a VAIO VGN-SZ75GN?
I have a VAIO VGN-SZ75GN, bought about 8 months ago, and now I want to exchange the built-in hard-disc with a solid-state disc.
I need some guide with illustrations/pictures, how to reach the disc
I have just been given a VAIO PCG8A2M (GRX316MP) , i was told "it's broken but if you can fix it yo can have it" so having a quick look at it there's no sign of life on the display but the lights come on and i can here the HDD heads moving about.
Looking a little more i found that all the ram is missing , so now im not sure if its worth buying some ram to see if it works or not ? The lack of ram would prob explain the lack of display but i wonder if i should be getting POST beeps at least, which im not.
So my question is if a VAIO had no ram should (if all else was working) it be getting POST beeps ?
Just performed a successful XP downgrade on my Vaio Z520, but have noticed that on this copy of the Vaio Silver Desktop Theme/Appearance doesn't exist.
I had it on my SZ and loved it over the XP Blue. Is there a way to get it back? I still have the restore discs from the SZ.
I have a HP Pavilion dv5-1235dx with an Intel Core 2 Duo T6400.
It a 2.0/2mb/800fsb chip.
Im looking to put in either the T8300 @ 2.4/3mb/800 or a T9300 @ 2.5/6mb/800. How much of a performance increase do you think i will be getting between my current chip and a new one? 2.4 vs 2.5 isnt a big deal but its the 3mb vs 6mb that im interested in. how difficult is it for a relative newb to change a CPU?
I don't know whats the diference (besides the price), between VAIO TZ295N & VAIO TZ395N. Specs in all the websites I've checked say they have exactly the same components: Intel coreduo 1.33Ghz 2GB RAM DVD-RW and 64GB SSD Hardrive. I was wonder if the diference might be in the hard drive interface, with the TZ295N being PATA and TZ395N being SATA.
View 3 Replies View RelatedI'm wondering if the Blu-ray optical drive (Panasonic UJ-232A) of the (old) VAIO Z series will be able to fit into the (new) VAIO Z series? I would really appreciate it if anyone is able to answer my question.
The reason I'm asking is because I'm seriously thinking of selling my VAIO Z690 & just buying the base Sony VAIO Z (VPCZ112GX/S). I may just be able to afford that base model & the icing on the cake will definitely be the UJ-232A drive being able to fit into the (new) VAIO Z series & work.
I got my XPS 16 a few days ago (was going to hold out for a possible GPU update, but found a great deal at the outlet with the rgb-led, and couldn't wait any longer , and I'm going to be traveling a lot with it, so I'd prefer the 6-cell with it's lower profile. Does anyone have a new 6-cell that they want to trade for a brand new 9-cell?
View 9 Replies View RelatedI have a XPS 1530 with the 128mb 8400gs GPU.
I've come across a MB with the 256mb 8600gt and would like to swap them out.
Does anyone know where I can find instructions on how to take apart my laptop?
So Dell has ordered me my replacement Studio 1555 for my current Dell 1535 as it has given me so many problems and still is, as I have explained in previous posts.
I am receiving it on the 14th of August and a courier is coming to take the old one away on the 17th.. I have those days to transfer all my data over, but I have a dilemma.
I recently had the Nvidia GPU failure on my XPS 1330 that a lot of people seem to get after 1.5 years of owning the laptop. Dell came out the next day and swapped the motherboard for a different one.
The only thing is, the motherboard they put in is a Rev:A00 which I assume is the very first revision? Not sure what I had in before but I'm noticing that the laptop is running very hot when just idling.
My CPU in an Intel T7500.
I am running Speedfan and even though CPU is very low, Temp1 is reporting 72C. Is this normal or is the laptop running hotter than it should? .....
i have a xps m1730 with a t7500 specs in the sig after buying a few pu hungry games i realized that something had to be done so can i replace an x9000 to replace my t7500?
View 9 Replies View RelatedI had a major car accident and my m6300 is partialy destroyed.
I already called Dell and i have the Accidental Cover.
What do you guys think i will get to replace the m6300?
IT had 4gb ddr2, FX1600 Quadro, T7500 etc.
I recently received my Dell Studio 1535 after my motherboard on my inspiron 9100 fried. The lcd screen on the 9100 is much better (1680x1050) than the 1535 (1280x800), also i hate glossy screens. After reading this thread
[apparently i cannot post links yet, just search "LCD Swap m1530" in this site and you'll get it right away.]
I was hopeful that i would be able to swap out the 1535 screen and put in the screen from the 9100. I got both successfully removed, but kinda got stuck with the inverters and all that stuff, and got scared because i don't want to break anything. The thing that confused me the most was that the 1535 lcd plugged TWO things (power i think?) directly into the inverter, whereas the 9100 has only 1 thing that plugs directly into its inverter. It seems pretty clear that the original inverter has to be the one the computer uses based on all my googling of this subject, but how can i do that if it doesn't plug into the inverter the same way? can someone please offer me some help in this? i would have like to have contacted the original poster of the thread i linked, but of course, no contact information was available in his profile I may post pictures if i decide to take it all apart again. At the very least, can someone confirm or deny that it would be possible to make this swap? i will be very disappointed if i'm stuck with this low res screen forever...
I am in the process of swaping out my display from the CCFL to a LED RGB display and seem to be having a little trouble.
I purchased the replacement display with a new cable which eliminates the CCFL inverter.
It appears that is all I need to make this happen since no terminals are left without a connection.
The display comes on as expected when the machine is turned on. Its starts with a white screen at full bright then shows the Dell logo. Proceeds on to display the Windows 7 booting, but goes black when the login window should appear. Basically the backlighting gets turned off since I can see the login window, but not enough to work with. If I put the machine to sleep and wake it back up, I see the login as the screen is now a full bright.
Once logged in, I am not able to adjust brightness. Dimming with the FN-arrow keys or display preferences does not have any effect. Basically, nothing I do will allow me to dim the display.
I have tried all of the following:
1. Uninstall and reinstall the ATI display drivers
2. Reflashing the BIOS
3. Clearing CMOS
4. Uninstall and reinstall Dell's System Command
5. See if windows could find a better display driver (nope)
I am running Windows 7 Ultimate 64 bit and the machine has the ATI FirePro M7740.
has anyone tried/considered/imagined swapping a 13.3" LCD onto a 1210xps?
does anyone know if the 1330 LCD connector is the same?
i know it wouldnt look pretty but id be prepared to cut and paste the bezel as necessary since the laptop wouldnt leave my room
Can I swap non-Back-lit keyboard for Back-lit Keyboard?
There are some very nice systems @ outlet, but w/o Back-lit Keyboard
First off, hope everyone is having a great time during the holidays and lets not forget our fellow soldiers still deployed.
So I received my replacement on the 21st with T9800 but they are sending me another replacement with the QX9300 processor.
Scenario, lets say they decide to give me the 260's SLI instead of the 280's SLI (which is what they gave me in this replacement and this is dellienware)...
Could I take the 280's in here and put them in the 2nd replacement, obviously put the the 260's in here and return it like that?
So in short, I want to take these 280s out and put them in the new replacement. Take those 260s out and put them in this one and send it back to dell.
Any input would be great
Does anyone know if the blu-ray burner that is used in the XPS 16 can be used as a direct swap in the studio 15?
The reason I am asking is because I have a 16 with the blu-ray burner but the xps 16 is a bit bulky. I still need equivalent power and multi-media capabilities but the 15 is almost a pound lighter and lends to a little more portability.
I am considering purchasing the studio 15 but can't justify the costs of adding the blu-ray. I got my xps 16 with blu-ray for a steal and I can't duplicate those kind of savings with the changes recently made to EPP.
Ideally, I would like to swap the dvd drive and throw it into the 16 in addition to adding the blu-ray to the 15.
Thanks in advance!
Can I swap an SSD for a HDD in this model? If so, would the SSD connect at SATA III (6 GB/s) or something less?
View 1 Replies View RelatedI have just received a refurb E6500 from the Dell outlet and felt as if it wouldn't be powerful enough for engineering (found an M4400 on the outlet a day after I bought the E6500 that would have fit my budget ).
So after reading some reviews and looking at some pictures I have decided to do a motherboard swap with an M4400 (and if everything works out make $60 from it all too!)
I completed the swap. powered up notebook, then no bios screen showed, screen had pixels all around it and garbled lines and got progressively brighter, then all of the sudden windows log on screen appeared. Normally I would not care, but I want to install Windows 7, I cannot do this if i cannot access the BIOS to change the boot sequence.
View 15 Replies View RelatedIf I got a different Studio 1555 could I just swap the harddrives? Cuz I've already spent like 50 hours setting this one up with programs and files and settings etc.
View 5 Replies View RelatedI have to send back my studio XPS 1645 the thing is I have a Bluray drive in the system but the original configuration is a DVD slot load drive.
I would like to take the bluray drive out and put the original slot load drive back in (a dell tech did this for me last time) I was wondering if anyone knows of a guide or a wants to walk me through the process of doing a drive replacement
So dell didn't upgrade my screen when they replaced my lid today and still interested in buy a LED WXGA for my lappy
So I found a couple screens for the 1340 on Ebay but ... not sure on a couple of things:
I have a Arctic White Lid with a 2MP webcam and ccfl screen, is the current led screen or the one in the m1330 is compatible with my lid ?
I managed to snag a minor graphics card upgrade for my laptop and installed it. I changed up my 9500m to a 9600m gt. Everything seems to be going great, just needed an HDTV to get it going For some reason it would only initially post video through the HDMI.
Anyway, my issue is, while the machine runs great in windows I can't for the life of me get it to display anything before that. Which includes the BIOS boot screen, the BIOS itself, the Boot Menu or even my Windows XP disc.
Like I said, games run great, windows runs great.