after installing winXP on this laptop I saw the card reader in my computer only once, and it disappeared. Tried different driver from the internet with no luck. It wont show up in my computer and is not working.
View 4 RepliesOne of the OEM memory modules took a hike, so I replaced both modules with a Corsair 2x2gb DDR2 800MHz kit.
Did the Alt-F10 and got Vista back.
While deleting all the bloat-ware I was prompted to make the Recovery Disk.
I went ahead and made the Recovery Disk after deleting all the game stuff.
After all that business I went ahead and finished deleting the NTI back up 5 and a couple other things.
Now I am in the process of installing the downloaded .exe SP2 for Vista and will jump online and do some other Microsoft updates (Defender, Explorer 8) the usual stuff.
Can I make another set of restore disk that will have all the updates and all that buiness? Or is the restore disk option just for when you first start using the system?
I performed a windows 7 clean install on my vaio (VPCEB11FX).
After that i installed the drivers properly.In Device manager i am able to see the MMC card reader and SD reader with respective path letters.
But in when i open my computer only dvd drive showing there
I bought a new 8935G and found that the card reader cannot read my 2GB H-Type xD card.
FDXGDFSGDFS
The camera I'm using it in does not show any problem.
GDFSGDFSG
I tried reinstalling reader driver.
GDSFGSF
I teste the reader with an old 16Mb xD card and this works.
FSGFSG
When I put the 2GB card in, Windows Vista says it has to be formatted; at this point the card is already unreadable in the camera and must be formatted againg there.
If I try to format on pc, the process stops at about 90% with an error.
I bought a new 8935G and found that the card reader cannot read my 2GB H-Type xD card.
GSDFGS
The camera I'm using it in does not show any problem.
GDFSGS
I tried reinstalling reader driver.
FGFSG
I teste the reader with an old 16Mb xD card and this works.
SFGF
When I put the 2GB card in, Windows Vista says it has to be formatted; at this point the card is already unreadable in the camera and must be formatted againg there.
If I try to format on pc, the process stops at about 90% with an error.
i have this laptop, great laptop, works great; however, the sd card reader has not worked in ages. I have tried upgrading to new drivers, reloading old drivers, etc etc....The driver company is ricoh.
View 5 Replies View RelatedAnyone use Sony's Memory Stick Pro in the card reader? Seems too small, I assume I need an adapter of some sort? Just hoping someone can confirm with a pic.
View 6 Replies View Relatedif the card reader in an Aspire 5920 can be upgraded to read 4Gb SD Cards?
View 7 Replies View RelatedMy memory card reader was fine, however after reinstalling Vista Ultimate it won't work.
It shows up as "Texas Instruments PCIxx21 Integrated FlashMedia Controller" in Device Manager. However I've tried multiple SD cards and it just won't recognize that anything has been inserted. The computer doesn't pause or show any indication that it's doing something when I insert a memory card.
I have a Ferrari 4006WLMi with Windows Vista Ultimate.
I have tried uninstalling and reinstalling the drivers several times already. I have also upgraded to the latest BIOS
I need to use a 4GB SDHC card as RAM via Readyboost...
I have tried everything to get this SD card reader to work but to no avail. Even a fresh install of W7/32 ... nothing... Every time i insert an SD card in the slot... i get a message. USB device not recognized ... one of the usb devices has malfunctioned & Windows does not recognize it... I am also just using a 2 g SD card not an sdhc card.
In the Device Manager.... it shows up as "unknown device" yellow highlight... try to update the driver ... says i already have the best driver..... when i take the sd card out...unknown device disappears... i have also re-installed the drivers from here for the card reader... but nothing....
Furthermore... it seems to lead to an error code 43 ..
My card reader stopped working. I read somewhere that it could be burnt out. Is there a way of checking this and or replacing it?Â
View 5 Replies View RelatedI have a brand new M4400, running W7pro x64. The M4400 came with an internal SD card reader. Now this card reader cannot read some standard SD cards (other work fine). Especially,
I have a Transcend SD 4GB 133x (http://www.bestpriceaudiovideo.com/i...ard-detail.jpg) that is problematic.
When I put the card in the reader, W7 tells me to format the card. This I do not want to do, of course. If I open Disk Management, it takes ages to open, and eventually shows the card as "Unallocated".
I have a Latitude E6410 with SD card reader. I can see the card reader in device management but the sd card will not apper as a drive in Windows 7. I tried the sd card on a colleagues laptop (exactly same spec and OS installation) and it works instantly.
View 2 Replies View Relatedbeen working fine for about 2wks now.. and today she fired it up and it has a black screen.. she can get into bios but has no idea what she is doing ..she claims that she did nothing different and was working fine when she shut it down yesterday..
View 8 Replies View RelatedI have an Acer 5735 laptop that I have used to access the internet wirelessly in the past on other networks without issue. I recently bought a TRENDnet TEW-637AP and plugged it into the back of my wireless router. I am getting a good signal and I am connecting to the network according to Vista but I cannot get it to load a web page to save my life. This hasn't been an issue in the past on other networks.
View 10 Replies View RelatedI was about to purchase a 5735 before the 5738 came out. Acer call it to be a new laptop but the specs are identical, I've checked the acer site and its all the same other than the bio-security. Can anyone else explain the differences? Is the 5738 a better chassis etc because I can't tell why the 5738 is more expensive other than blu-ray etc, which my model won't have.
Both are Centrino 2 laptops as well.
Should I just go with the 5735. Anyone have any good experiences of using the 5735 laptop? Strong, quick and reliable?
I've got an offer to buy a 5738 with a 250HD for £419 and a 5735 with a 500HD for £440.
Other than the hard drive and the fact that the 5738 is newer, which would you go for?
These were not answered by Acer tech soupport [not a typo or misspelling]. Each was sent in as a separate question and returned marked "closed".
Where are the drivers for Vista-to-Win 7 upgrade?
What is the recommended procedure for 1?
Should the C/D partition be preserved after upgrade?
If 3 is "yes", which backup program should be used thereafter: Acer, MS, or both?
What is the matrix key for the 2 LEDs on the left top edge (see pic)?
(this should be 6.) Can the card reader be upgraded to read SDHC memory cards?
(this should be 7.) Where is the Acer knowledge base reference library for this notebook?
(this should be 8.) Where is the Acer-sponsored user forum for Acer computers?
I just bought a new Acer 5735-4624 aspire model. It comes with Vista and of course I'm looking to move back to Xp. Only thing is I cant find any support drivers anywhere. Even on the Acer site--the friggin model is not even listed. I know it's new and all---but!
I have an e-mail in to Acer support but I already know about their famous support woes.
Anyone have an idea so I can move to little ol' XP?
Any drivers perhaps from other models that might be compatiable?
I just bought an acer 5735z and with the intel 4500mhd and it wont even start any games at all, it always goes to a black screen.
I've updated the graphics drivers and still the same black screen, I've tried call of duty 4 and 3dmark 05 and they both do exactly the same thing it just won't run them
here's the specs;
t3400 2.2ghz
3gb ram
250gb HDD
4500mhd graphics
i just got this notebook listed on the title right? Mostly everything works perfectly.
Except apparently i have to update my Drivers for the Intel(R) GMA Driver for Mobile. So i look at the Intel website no drivers found, or ones that needed updates..
So Ive been told that in some cases for laptops you must go to the computer manufacturers website and find the drivers there, this website being Acer. But it seems there is no trace for Aspire 5735-4624 Drivers ANYWHERE. I think the laptop is fairly new but there has to be SOME drivers somewhere right? I am not sure if this is a problem for any other people out there, or i am just not looking hard enough?
I've recently posted a question here Total Memory in task manager incorrect after upgrade to 4gb Aspire 5735 where I received some great help. However I've done a bit more research and I'm starting to fear my notebook may be limited to 3gb by the bios/chipset for some reason. I have just upgraded it from 3gb to 4gb. The bios shows 4gb as the installed amount but memtest in dos mode only shows 3000mb total as does windows task manager.
So it appears the notebook detects the 4gb installed ram but only allocated 3gb.
My question is does anyone know if acer has limited this notebook to 3gb total and if there are any suggestions on getting around this limit?
I have an Acer Aspire 5735 with an inbuilt Crystal Eye Webcam, I have managed to set up and talk to a contact, but my contact can see me, but I cannot see them. What do I need to do to rectify this? Or is it my contacts problem.
View 5 Replies View RelatedI have just bought an Aspire 5735 a few weeks ago and, to be fair, it's fantastic for the money; however, i've noticed that in spite of the screen being sharp it appears slightly grainy when i physically scan across the screen with my eyes?!! I have checked this against my 7 year old Sony Vaio but it doesn't have the same problem, it's a mystery...
I was kind of wondering if because the pixels where so closely produced (it is quite a compact 15.4" widescreen display) that it was a trick of the mind? The grainy effect is symetrical like a chequerboard pattern or herringbone!
If i stare at the screen without any physical movement the picture/graphics are pin sharp, it's only if I alter my viewing angle or scan the screen quickly with my peepers; maybe my brain just isn't sharp enough any more to de-code the data!
My exact model details are:- Aspire 5735, 4gb ram, 6400 intel core2duo, vista premium home edition.
I just updated my Acer Aspire 5735 notebook from 3gb DDR2 to 4gb DDR2. The bios now detects 4gb total as does Vista's System Page (Control Panel/System in Ultimate 64bit)
However when i go to task manager/performance my total physical memory shows up as 3000MB and the Physical Memory Usage graph seems to reflect this 3gb total.
Is there something I need to do to get vista to detect and utilise the 4gb total?
I recently restored my vaio TX750P/B using the built-in vaio recovery. However, my SD card slot doesn't seem to work anymore. The memory stick slot does work, and it shows up on my computer, but nothing for the SD slot.
I've tried reinstalling the drivers to no avail...
I recently saw that my M1710 has an card reader...
Can I use it for reading mijn debit/creadit cards for online banking,... or not?
I put in my SDHC card from my camera and it does not read or see the card.
I have Vista Premium 32bit.
Is there are weird firmware I have to get?
I am just thinking is SD Controler in E6400 is SDHC capable?
View 3 Replies View RelatedI've an HP 6510B and I don't know which is the sd/mmc card reader driver to download.
Actually the card readibility is not available under my system. I' ve installed win xp professional.
When I insert my SD card into my laptop. It does not show anything in my removal drive area. I have used more than one SD card with same result.
Â
My operating system - Windows 7 Ultimate (64-bit)
Â
SD card - Digital camera SD Card