When I insert my SD card into my laptop. It does not show anything in my removal drive area. I have used more than one SD card with same result.
My operating system - Windows 7 Ultimate (64-bit)
SD card - Digital camera SD Card
I have searched the boards and have not found an answer to my built in SD card reader not working any more. It worked fine until a couple weeks ago. When I go to "my computer", the sd card does not show up as an available drive. I have tried several cards with no luck. The cards work fine when I use a USB card reader, just not the built in one.I checked the driver in device manager - at least the one I believe is the correct one - Realtec PCIE Card Reader.
View 9 Replies View RelatedI have an HP ENVY 15t-j100 Quad Edition running Windows 7. Its card reader is not working. When I insert an SD card, I get a message that the device is not installed properly. Windows prompts me to update the driver, so I have let it, but it cannot find the driver. In the Device Manager, with the SD card inserted, it shows under "Other devices" a "Disk drive" with a yellow "!" symbol. The device status reads:
"The drivers for this device are not installed. (Code 28)
To find a driver for this device, click Update Driver."
I have tried to update the driver from there, but again no driver is reported to be found.
By the way, the Device Manager says that the Realtek PCIE CardReader is working properly. I have updated its driver using sp66065.exe, but there is no difference. The card reader is still not reading, nor is there a drive letter showing up for the inserted card.
If I disable the Realtek PCIE CardReader, then the "Other devices," "Disk drive" in the Device Manager goes away. But the card reader is not functioning all the same. If I enable the card reader, the same error returns with a yellow '!" under the "Other devices," "Disk drive" in the Device Manager,
I performed a windows 7 clean install on my vaio (VPCEB11FX).
After that i installed the drivers properly.In Device manager i am able to see the MMC card reader and SD reader with respective path letters.
But in when i open my computer only dvd drive showing there
My HP Pavilion dv6 SD card reader is not working after windows 8 upgrade (6 months ago). Previously it was working fine when I was using Win 7 (which is the default OS with this laptop). I cant find the device in Device manager (under System Device or Disk Drives).
View 6 Replies View RelatedI've a new Thinkpad W540 with Windows 7 64bit. I can't see the Card Reader in the device list. When I insert a SD Card, nothing happens. All I/Os are enabled in the Bios. What can I do?
View 3 Replies View RelatedFor about a year, I've had an SDXC card in the built-in card reader of my Folio 13-1020us.
It's been working fine until a couple days ago. Then something I was downloading to it failed to complete, which is how I noticed that it had stopped working. Now, it doesn't appear in drives under My Computer, and it doesn't appear in Device Manager.
In an older HP laptop, I can at least see the card's drive letter and the name I gave it, so I think the card itself must be fine. But I can't see anything at all when I place it in the Folio.
I have a feeling the reader itself has just failed. I'm out of warranty by just a few months. Do I have to extend my warranty and send it in to get it fixed? I do not want to use an external reader because I use the card as extra storage space.
Operating system: Windows 7
SD card: PNY brand, 64GB SDXC
So I installed Windows 8 (Clean install, no upgrades) on the machine and since then the card reader isnt working. I downloaded and installed the drivers from Lenovo Website and after failing from Driver Genius and then from ThinkVantage System Update 5.03. Still doesn't work, I install them, but after I reboot it is installed but the card reader doesn't work (It was working before on Windows 7 on the same day I installed W8). I updated to 8.1 and the problem continues.
View 8 Replies View RelatedMy card reader stopped working. I read somewhere that it could be burnt out. Is there a way of checking this and or replacing it?
View 5 Replies View RelatedI have a dell vostro 3350. On windows 7 the sd card and usb 2/esata port work as expected.
On windows 8 they dont. If i install the latest drivers, they work until i reboot the laptop after which they are back to not working.
Is this laptop just not Win8 compatible?
I have a brand new M4400, running W7pro x64. The M4400 came with an internal SD card reader. Now this card reader cannot read some standard SD cards (other work fine). Especially,
I have a Transcend SD 4GB 133x (http://www.bestpriceaudiovideo.com/i...ard-detail.jpg) that is problematic.
When I put the card in the reader, W7 tells me to format the card. This I do not want to do, of course. If I open Disk Management, it takes ages to open, and eventually shows the card as "Unallocated".
I bought a new 8935G and found that the card reader cannot read my 2GB H-Type xD card.
FDXGDFSGDFS
The camera I'm using it in does not show any problem.
GDFSGDFSG
I tried reinstalling reader driver.
GDSFGSF
I teste the reader with an old 16Mb xD card and this works.
FSGFSG
When I put the 2GB card in, Windows Vista says it has to be formatted; at this point the card is already unreadable in the camera and must be formatted againg there.
If I try to format on pc, the process stops at about 90% with an error.
I bought a new 8935G and found that the card reader cannot read my 2GB H-Type xD card.
GSDFGS
The camera I'm using it in does not show any problem.
GDFSGS
I tried reinstalling reader driver.
FGFSG
I teste the reader with an old 16Mb xD card and this works.
SFGF
When I put the 2GB card in, Windows Vista says it has to be formatted; at this point the card is already unreadable in the camera and must be formatted againg there.
If I try to format on pc, the process stops at about 90% with an error.
I recently restored my vaio TX750P/B using the built-in vaio recovery. However, my SD card slot doesn't seem to work anymore. The memory stick slot does work, and it shows up on my computer, but nothing for the SD slot.
I've tried reinstalling the drivers to no avail...
I recently saw that my M1710 has an card reader...
Can I use it for reading mijn debit/creadit cards for online banking,... or not?
I put in my SDHC card from my camera and it does not read or see the card.
I have Vista Premium 32bit.
Is there are weird firmware I have to get?
I am just thinking is SD Controler in E6400 is SDHC capable?
View 3 Replies View Relatedi have this laptop, great laptop, works great; however, the sd card reader has not worked in ages. I have tried upgrading to new drivers, reloading old drivers, etc etc....The driver company is ricoh.
View 5 Replies View RelatedI've an HP 6510B and I don't know which is the sd/mmc card reader driver to download.
Actually the card readibility is not available under my system. I' ve installed win xp professional.
I have an xps m1330, I have windows XP media center installed on it, the media card reader works fine for my 2gb sd card,
but when i stick in my 8gb sdhc pny i just bought from best buy, the laptop doesn't recognize it,
i've downloaded the latest ricoh driver from xps m1730 windows xp on dell's site but no success
Has anyone ever used the smart card reader in their XPS M1710.
It was in there when Dell sent the M1710 to replace my Gen2 but I cant seem to find any use for it..
Apparently you can use it instead of a password but the cards dont seem easily available..
Does anyone know the speed of the SD card reader on Vaio TT? I am planning to run the Windows 7 from the HDD; and run Ubuntu from the flash card that I will be putting on that reader
View 10 Replies View RelatedAnyone use Sony's Memory Stick Pro in the card reader? Seems too small, I assume I need an adapter of some sort? Just hoping someone can confirm with a pic.
View 6 Replies View Relatedif the card reader in an Aspire 5920 can be upgraded to read 4Gb SD Cards?
View 7 Replies View RelatedI've got an issue with the card reader on my hp.
It just won't hold the SD cards in place.
If i hold it with my finger it reads the card, but it won't fixate in there.
If i release the finger the card comes out. On my m1730 i put the card inside, it locks in, i press it, it goes out. So i assume it's a problem with the reader.
is it possible to disable the smart card reader in the BIOS or some other way?
View 3 Replies View RelatedMy SD card reader isn't working very well. When I push a card in and let it click into place, coming back out a little, my laptop doesn't recognize it.
I have to push and hold the card all the way down to the bottom of its travel for the computer to recognize it. This means I have to keep my hand on it to use it.
I just do a fresh install windows XP. Everything has been installed properly (no exclamation mark) in device driver. However, 1 thing that hasn't worked is the SD card reader. I inserted SD Card and nothing shows up. I open My Computer, the only available is my hard disk (C and cd-rom (D.
I opened device manager: IDE/ATA/ATAPI controllers:
Ricoh SD/MMC host controller.
after installing winXP on this laptop I saw the card reader in my computer only once, and it disappeared. Tried different driver from the internet with no luck. It wont show up in my computer and is not working.
View 4 Replies View RelatedMy memory card reader was fine, however after reinstalling Vista Ultimate it won't work.
It shows up as "Texas Instruments PCIxx21 Integrated FlashMedia Controller" in Device Manager. However I've tried multiple SD cards and it just won't recognize that anything has been inserted. The computer doesn't pause or show any indication that it's doing something when I insert a memory card.
I have a Ferrari 4006WLMi with Windows Vista Ultimate.
I have tried uninstalling and reinstalling the drivers several times already. I have also upgraded to the latest BIOS
I need to use a 4GB SDHC card as RAM via Readyboost...