I have searched the boards and have not found an answer to my built in SD card reader not working any more. It worked fine until a couple weeks ago. When I go to "my computer", the sd card does not show up as an available drive. I have tried several cards with no luck. The cards work fine when I use a USB card reader, just not the built in one.I checked the driver in device manager - at least the one I believe is the correct one - Realtec PCIE Card Reader.
My HP Pavilion dv6 SD card reader is not working after windows 8 upgrade (6 months ago). Previously it was working fine when I was using Win 7 (which is the default OS with this laptop). I cant find the device in Device manager (under System Device or Disk Drives).
I have an HP ENVY 15t-j100 Quad Edition running Windows 7. Its card reader is not working. When I insert an SD card, I get a message that the device is not installed properly. Windows prompts me to update the driver, so I have let it, but it cannot find the driver. In the Device Manager, with the SD card inserted, it shows under "Other devices" a "Disk drive" with a yellow "!" symbol. The device status reads:
"The drivers for this device are not installed. (Code 28)
To find a driver for this device, click Update Driver."
I have tried to update the driver from there, but again no driver is reported to be found.
By the way, the Device Manager says that the Realtek PCIE CardReader is working properly. I have updated its driver using sp66065.exe, but there is no difference. The card reader is still not reading, nor is there a drive letter showing up for the inserted card.
If I disable the Realtek PCIE CardReader, then the "Other devices," "Disk drive" in the Device Manager goes away. But the card reader is not functioning all the same. If I enable the card reader, the same error returns with a yellow '!" under the "Other devices," "Disk drive" in the Device Manager,
I've a new Thinkpad W540 with Windows 7 64bit. I can't see the Card Reader in the device list. When I insert a SD Card, nothing happens. All I/Os are enabled in the Bios. What can I do?
For about a year, I've had an SDXC card in the built-in card reader of my Folio 13-1020us.
It's been working fine until a couple days ago. Then something I was downloading to it failed to complete, which is how I noticed that it had stopped working. Now, it doesn't appear in drives under My Computer, and it doesn't appear in Device Manager.
In an older HP laptop, I can at least see the card's drive letter and the name I gave it, so I think the card itself must be fine. But I can't see anything at all when I place it in the Folio.
I have a feeling the reader itself has just failed. I'm out of warranty by just a few months. Do I have to extend my warranty and send it in to get it fixed? I do not want to use an external reader because I use the card as extra storage space.
Operating system: Windows 7 SD card: PNY brand, 64GB SDXC
So I installed Windows 8 (Clean install, no upgrades) on the machine and since then the card reader isnt working. I downloaded and installed the drivers from Lenovo Website and after failing from Driver Genius and then from ThinkVantage System Update 5.03. Still doesn't work, I install them, but after I reboot it is installed but the card reader doesn't work (It was working before on Windows 7 on the same day I installed W8). I updated to 8.1 and the problem continues.
My fingerprint reader stopped working. I can open the Simple Pass ID program but when I click on fingerprints, it indicates "verifying identity" with an hourglass on top of the fingerprint icon and no matter how long I wait, that's all that happens.
I am convinced that the fingerprint reader is fine. There must be some issue with the driver perhaps, something incompatible with a recent Windows 7 software update?
Laptop working fine. I put it to sleep when I'm done and use the mousepad to wake it up. The fingerprint reader LED will blink, and I can swipe my finger to log on.At some point, after a few times of putting laptop to sleep and waking up, the fingerprint reader does not respond. No blinking LED. I swipe my finger and the reader does not respond at all -- doesn't even tell me that there was a bad read.If I log off and log back on again, no change. However, if I do a reboot, everything is fine--the fingerprint reader is working again.
My system is an HP dv6-6145dx. I am running Windows 7, with latest updates. The built-in fingerprint reader is running on HP Simple Pass 2011 v5.1 and Validity Sensor driver version 4.3.205.0. When I attempt to launch the Simple Pass interface, it loads the database but then the application vanishes. I tried uninstalling and then reinstalling the software, but this does not make any difference with the issue I noted.
I have a brand new M4400, running W7pro x64. The M4400 came with an internal SD card reader. Now this card reader cannot read some standard SD cards (other work fine). Especially,
I have a Transcend SD 4GB 133x (http://www.bestpriceaudiovideo.com/i...ard-detail.jpg) that is problematic.
When I put the card in the reader, W7 tells me to format the card. This I do not want to do, of course. If I open Disk Management, it takes ages to open, and eventually shows the card as "Unallocated".
I bought a new 8935G and found that the card reader cannot read my 2GB H-Type xD card. FDXGDFSGDFS The camera I'm using it in does not show any problem. GDFSGDFSG I tried reinstalling reader driver. GDSFGSF I teste the reader with an old 16Mb xD card and this works. FSGFSG When I put the 2GB card in, Windows Vista says it has to be formatted; at this point the card is already unreadable in the camera and must be formatted againg there.
If I try to format on pc, the process stops at about 90% with an error.
I bought a new 8935G and found that the card reader cannot read my 2GB H-Type xD card. GSDFGS The camera I'm using it in does not show any problem. GDFSGS I tried reinstalling reader driver. FGFSG I teste the reader with an old 16Mb xD card and this works. SFGF When I put the 2GB card in, Windows Vista says it has to be formatted; at this point the card is already unreadable in the camera and must be formatted againg there.
If I try to format on pc, the process stops at about 90% with an error.
i tried to play some games but i am getting error that my graphic card drivers are either not installed properly or they are missing altogether. when i access the link mycomputer/manage/ divice manager/ display adapter, the radeon card is working properly. but when i right-clicking on desktop and click graphics properties, it getting error that no AMD graphics driver installed,or the AMD driver is not functioning properly. And the catalyst control center cannot be started. My notebook specs are-(dxdiag)
My graphic card is not working with any games. I have already updated graphic driver and also manually reinstalled it but still i am facing same problem. I am using windows 8.1 64 bit .....
i have problem on my laptop (Pavilion DV7-4087CL_. I have windows 7 64 bit , and all drivers is update and special ATI from AMD RADEON LAST one. After too many installation i cannot play 3d games or whatever game with my ati.
When i access the link mycomputer/manage/ device manager/ display adapter, the radeon card is working properly. but when i right-clicking on desktop and click graphics properties, it getting error that no AMD graphics driver installed,or the AMD driver is not functioning properly. And the catalyst control center cannot be started.
I update driver and download last version this driver from amd site but not solved problem ....
I have an HP Pavillion zv6000 and my audio isn't working and i enter in the device manager and shows this error: "This device cannot start. Code 10" After this i installed my audio driver from the site and still same problem.
i recently purchased the above notebook and tried to play some games but i am getting error that my graphic card drivers are either not installed properly or they are missing altogether, i had installed drivers from AMD's autodetect driver tool. Earlier i had installed AMD drivers from windows update but the problem still exists. In the game i am getting memory insufficient error, unable to change graphics and display settings. Game crashes giving me error message as to update my AMD graphic drivers.
My notebook specs are-(dxdiag) System Model: HP Pavilion 15 Notebook PC BIOS: F.42 Processor: Intel(R) Core(TM) i3-4010U CPU @ 1.70GHz (4 CPUs), ~1.7GHz Memory: 4096MB RAM Available OS Memory: 4026MB RAM
Display Devices- Card name: Intel(R) HD Graphics Family Manufacturer: Intel Corporation Chip type: Intel(R) HD Graphics Family Display Memory: 1792 MB Dedicated Memory: 0 MB Shared Memory: 1792 MB
I tried changing settings through BIOS setup, but no such (Advance/Display)setting were available? I tried setting the app to high performance too through 'Configue Switchable Graphics' option but no success. which drivers i need to install or what i need to do to work my AMD Radeon Card.
I recently restored my vaio TX750P/B using the built-in vaio recovery. However, my SD card slot doesn't seem to work anymore. The memory stick slot does work, and it shows up on my computer, but nothing for the SD slot.
I've tried reinstalling the drivers to no avail...
i have this laptop, great laptop, works great; however, the sd card reader has not worked in ages. I have tried upgrading to new drivers, reloading old drivers, etc etc....The driver company is ricoh.
I've an HP 6510B and I don't know which is the sd/mmc card reader driver to download. Actually the card readibility is not available under my system. I' ve installed win xp professional.
