My HP Pavilion dv6 SD card reader is not working after windows 8 upgrade (6 months ago). Previously it was working fine when I was using Win 7 (which is the default OS with this laptop). I cant find the device in Device manager (under System Device or Disk Drives).
View 6 Replies
I have searched the boards and have not found an answer to my built in SD card reader not working any more. It worked fine until a couple weeks ago. When I go to "my computer", the sd card does not show up as an available drive. I have tried several cards with no luck. The cards work fine when I use a USB card reader, just not the built in one.I checked the driver in device manager - at least the one I believe is the correct one - Realtec PCIE Card Reader.
View 9 Replies View RelatedMy SD card reader became non-functional after a recent upgrade of my T520 to Windows 8.1. Hardware troubleshooting said the Base System Device driver was not installed. I installed the Lenovo System Update software and searched for updates, but the driver was not updated. There is still a yellow warning symbol beside the Base System Device in the device manager. Discovered on the Lenovo driver download website that the card reader in my model is the Ricoh Media Card Reader but there is no driver compatible with Windows 8.1. Would the Windows 8 driver work or is there another solution to get my reader running again?
View 3 Replies View RelatedSo I installed Windows 8 (Clean install, no upgrades) on the machine and since then the card reader isnt working. I downloaded and installed the drivers from Lenovo Website and after failing from Driver Genius and then from ThinkVantage System Update 5.03. Still doesn't work, I install them, but after I reboot it is installed but the card reader doesn't work (It was working before on Windows 7 on the same day I installed W8). I updated to 8.1 and the problem continues.
View 8 Replies View RelatedI performed a windows 7 clean install on my vaio (VPCEB11FX).
After that i installed the drivers properly.In Device manager i am able to see the MMC card reader and SD reader with respective path letters.
But in when i open my computer only dvd drive showing there
I have a dell vostro 3350. On windows 7 the sd card and usb 2/esata port work as expected.
On windows 8 they dont. If i install the latest drivers, they work until i reboot the laptop after which they are back to not working.
Is this laptop just not Win8 compatible?
if the card reader in an Aspire 5920 can be upgraded to read 4Gb SD Cards?
View 7 Replies View Relatedi upgraded from Windows 7 Home premium to Windows 8 pro . Eversince, my AMD radeon HD 7400M series graphic card is not functioning. Further , bluetooth is also not functioning .
View 9 Replies View RelatedWhen I insert my SD card into my laptop. It does not show anything in my removal drive area. I have used more than one SD card with same result.
My operating system - Windows 7 Ultimate (64-bit)
SD card - Digital camera SD Card
I have an HP ENVY 15t-j100 Quad Edition running Windows 7. Its card reader is not working. When I insert an SD card, I get a message that the device is not installed properly. Windows prompts me to update the driver, so I have let it, but it cannot find the driver. In the Device Manager, with the SD card inserted, it shows under "Other devices" a "Disk drive" with a yellow "!" symbol. The device status reads:
"The drivers for this device are not installed. (Code 28)
To find a driver for this device, click Update Driver."
I have tried to update the driver from there, but again no driver is reported to be found.
By the way, the Device Manager says that the Realtek PCIE CardReader is working properly. I have updated its driver using sp66065.exe, but there is no difference. The card reader is still not reading, nor is there a drive letter showing up for the inserted card.
If I disable the Realtek PCIE CardReader, then the "Other devices," "Disk drive" in the Device Manager goes away. But the card reader is not functioning all the same. If I enable the card reader, the same error returns with a yellow '!" under the "Other devices," "Disk drive" in the Device Manager,
I've a new Thinkpad W540 with Windows 7 64bit. I can't see the Card Reader in the device list. When I insert a SD Card, nothing happens. All I/Os are enabled in the Bios. What can I do?
View 3 Replies View RelatedFor about a year, I've had an SDXC card in the built-in card reader of my Folio 13-1020us.
It's been working fine until a couple days ago. Then something I was downloading to it failed to complete, which is how I noticed that it had stopped working. Now, it doesn't appear in drives under My Computer, and it doesn't appear in Device Manager.
In an older HP laptop, I can at least see the card's drive letter and the name I gave it, so I think the card itself must be fine. But I can't see anything at all when I place it in the Folio.
I have a feeling the reader itself has just failed. I'm out of warranty by just a few months. Do I have to extend my warranty and send it in to get it fixed? I do not want to use an external reader because I use the card as extra storage space.
Operating system: Windows 7
SD card: PNY brand, 64GB SDXC
My card reader stopped working. I read somewhere that it could be burnt out. Is there a way of checking this and or replacing it?
View 5 Replies View RelatedThe wifi orange light does not change to white light after upgrading to windows 8 OS from windows home premium. i am using pavilion dv6-7011tx laptop, my product no. is. B0P39PA#ACJ this is very frustating as theres no wifi as well as bluetooth connectivity, the wireless button key solution is useless.
View 9 Replies View RelatedMy fingerprint reader stopped working. I can open the Simple Pass ID program but when I click on fingerprints, it indicates "verifying identity" with an hourglass on top of the fingerprint icon and no matter how long I wait, that's all that happens.
Pavilion dv6t 3100 notebook, Win 7 Home Premium 64-bit, 8GB RAM, i5 processor.
I just do a fresh install windows XP. Everything has been installed properly (no exclamation mark) in device driver. However, 1 thing that hasn't worked is the SD card reader. I inserted SD Card and nothing shows up. I open My Computer, the only available is my hard disk (C and cd-rom (D.
I opened device manager: IDE/ATA/ATAPI controllers:
Ricoh SD/MMC host controller.
I am convinced that the fingerprint reader is fine. There must be some issue with the driver perhaps, something incompatible with a recent Windows 7 software update?
Laptop working fine. I put it to sleep when I'm done and use the mousepad to wake it up. The fingerprint reader LED will blink, and I can swipe my finger to log on.At some point, after a few times of putting laptop to sleep and waking up, the fingerprint reader does not respond. No blinking LED. I swipe my finger and the reader does not respond at all -- doesn't even tell me that there was a bad read.If I log off and log back on again, no change. However, if I do a reboot, everything is fine--the fingerprint reader is working again.
My system is an HP dv6-6145dx. I am running Windows 7, with latest updates. The built-in fingerprint reader is running on HP Simple Pass 2011 v5.1 and Validity Sensor driver version 4.3.205.0. When I attempt to launch the Simple Pass interface, it loads the database but then the application vanishes. I tried uninstalling and then reinstalling the software, but this does not make any difference with the issue I noted.
I just finished installing Windows 7 on my new dv7-1285dx and while everything works just fine after a Windows update (audio/video/touchpad/sd card reader), when I run device manager there are three devices with no drivers and a small yellow exclamation mark on their icon. These three devices are all listed as "Base System Device" and when I tried searching for a driver update online it didn't find anything. I visited HP's drivers page for my model and I think I have everything listed there already working... It's just these three devices which I don't even know what they are.
In the original Vista install that came with the laptop there are no such errors in Device Manager. I already have my recovery discs if these might help in this situation.
Here my laptops full specs, you can find them here:
[url] (that's the exact one I bought)
I upgraded my daughters Inspiron 1520 to Windows 8 and everything works well. The only problem we are having is the memory card reader does not work. Windows 8 recognizes it and shows the action center flag and advises us to install a new driver.. We install the driver R188776.exe, install it, and re-boot, but the memory card reader still doesn't work.. Is there another driver we can install?
View 5 Replies View RelatedAfter upgrade to 8.1 HDMI port didn't work. Followed instructions to correct BIOS and graphice driver; HDMI works - however Silverlight no longer working with DMS.
Get error 6036 in Silverlight which is Graphics device's driver certificate is invalid
Have checked graphics driver and is all up to date
Machine is HP Pavilion 11 x2
Graphics driver version 10.18.10.3366
I did an upgrade from win vista x32 to win 7 x64 on my Dell Studio 1735. In order to do that upgrade I did change the HDD to a 1 TB and update from 3GB to 4GB ram.
Now I have on item still not working after that upgrade. The integrated biometric (fingerprint reader) refuse to work. Windows 7 x64 did detect that it was an Authentec device, and installed it driver.
But If I installe the software for the reader. It refuse to install and give this as the reason (No driver installed for the reader) I've tried to replace the windows driver with the original Authentec drivers, but windows 7 replace the drivers with it's own.
Any windows 7 drivers out there for my Authentec integrated device ?
I can no longer use or enroll finger prints on my T430s laptop running Windows 8.1!
ThinkVantage Fingerprint Software is 6.0.0.8102.
Sensor: TouchChip Fingerprint Coprocessor (WBF advanced mode). Driver version: 1.6.2.352.
Symptom: when trying to enroll a fingerprint, I get the message: 'Use a longer stroke when scanning your fingerprint,' the sensor light turns from green to blinking orange (3 times), then back to green. Same happens when when trying to enroll from Windows PC Setting/ Sign-in Options/ Fingerprint (Add).
What I tried: uninstalling ThinkVantage Fingerprint Software and Driver (to include selecting 'Delete the driver software for this device'), rebooting, using Lenovo System Update to re-install ThinkVantage Fingerprint Software, rebooting. Have also tried to manually install previous versions of the Fingerprint Software to no avail.
I had this similar problem in the past, since upgrading from Windows 8 to 8.1, but the steps above usually resolved it.
The Lenovo fingerprint reader software isn`t running on windows 8.1?
View 7 Replies View RelatedI wanted to do a clean install on my new laptop and this is the only thing I can't seem to get working so far. The Validity driver from the HP website is installed but, there's no security software listed for this device. I tried Protecttools and it said it wasn't supported on this device, I also tried Simple Pass and it wouldn't start without crashing. I'm not even sure I'm installing the correct software.
View 8 Replies View RelatedI have a brand new M4400, running W7pro x64. The M4400 came with an internal SD card reader. Now this card reader cannot read some standard SD cards (other work fine). Especially,
I have a Transcend SD 4GB 133x (http://www.bestpriceaudiovideo.com/i...ard-detail.jpg) that is problematic.
When I put the card in the reader, W7 tells me to format the card. This I do not want to do, of course. If I open Disk Management, it takes ages to open, and eventually shows the card as "Unallocated".
I'm not able to use my finger print reader/simple pass now that I've downloaded windows 8.1 Been reading some of the other questions and difficulties people are having but haven't been able to still get it to work.
I have an HP Envy M6 1125dx
00179-60246-20486-AA0EM
64-bit Intel Core i5
Running Windows 8.1
After upgrading from vista home premium to Windows 8 32bit. the Digital Persona Fingerprint reader software is not working .
View 5 Replies View RelatedI bought a new 8935G and found that the card reader cannot read my 2GB H-Type xD card.
FDXGDFSGDFS
The camera I'm using it in does not show any problem.
GDFSGDFSG
I tried reinstalling reader driver.
GDSFGSF
I teste the reader with an old 16Mb xD card and this works.
FSGFSG
When I put the 2GB card in, Windows Vista says it has to be formatted; at this point the card is already unreadable in the camera and must be formatted againg there.
If I try to format on pc, the process stops at about 90% with an error.
I bought a new 8935G and found that the card reader cannot read my 2GB H-Type xD card.
GSDFGS
The camera I'm using it in does not show any problem.
GDFSGS
I tried reinstalling reader driver.
FGFSG
I teste the reader with an old 16Mb xD card and this works.
SFGF
When I put the 2GB card in, Windows Vista says it has to be formatted; at this point the card is already unreadable in the camera and must be formatted againg there.
If I try to format on pc, the process stops at about 90% with an error.
I have a brand new T540P with a Validity fingerprint reader.
Rougly 80% of the time, the Fingerprint reader is unresponsive at the windows login screen after waking the computer from sleep. It works 100% of the time when booting from an off position, however. Once logged in, it also works 100% of the time. The issue only arises when logging into windows.
Things I have tried
-uninstalling/installing device in device manager and finger print manager pro software
-setting fingerprints through both fingerprint manager pro software (lenovo) OR through the built in windows fingerprint control panel options
-disabling "allow windows to turn off this device to save power" in device manager.
I should note as well that I have another T540P that I ordered as a replacement. Both models experience the same issue.
Is this a platform wide issue affecting all T540P models?
