HP Envy 15t-j100 :: Card Reader Not Working?
Oct 2, 2014
I have an HP ENVY 15t-j100 Quad Edition running Windows 7. Its card reader is not working. When I insert an SD card, I get a message that the device is not installed properly. Windows prompts me to update the driver, so I have let it, but it cannot find the driver. In the Device Manager, with the SD card inserted, it shows under "Other devices" a "Disk drive" with a yellow "!" symbol. The device status reads:
"The drivers for this device are not installed. (Code 28)
To find a driver for this device, click Update Driver."
I have tried to update the driver from there, but again no driver is reported to be found.
By the way, the Device Manager says that the Realtek PCIE CardReader is working properly. I have updated its driver using sp66065.exe, but there is no difference. The card reader is still not reading, nor is there a drive letter showing up for the inserted card.
If I disable the Realtek PCIE CardReader, then the "Other devices," "Disk drive" in the Device Manager goes away. But the card reader is not functioning all the same. If I enable the card reader, the same error returns with a yellow '!" under the "Other devices," "Disk drive" in the Device Manager,
View 9 Replies
ADVERTISEMENT
Aug 17, 2014
I have a HP ENVY 17t-j100 Leap Motion QE CTO Notebook PC (ENERGY STAR) with optimus technology.Can I disconnect the optimus technology and only use the NVIDIA card?
View 3 Replies
View Related
Apr 18, 2014
I reinstalled Windows 7 from disk, and can't get the Card Reader to work properly. I tried the drivers from the site and it installs but still doesn't work.
Here is my Hardware ID:
PCIVEN_10EC&DEV_5209&SUBSYS_1689103C&REV_01
View 3 Replies
View Related
Sep 2, 2014
When I insert my SD card into my laptop. It does not show anything in my removal drive area. I have used more than one SD card with same result.
My operating system - Windows 7 Ultimate (64-bit)
SD card - Digital camera SD Card
View 2 Replies
View Related
Feb 28, 2013
I have searched the boards and have not found an answer to my built in SD card reader not working any more. It worked fine until a couple weeks ago. When I go to "my computer", the sd card does not show up as an available drive. I have tried several cards with no luck. The cards work fine when I use a USB card reader, just not the built in one.I checked the driver in device manager - at least the one I believe is the correct one - Realtec PCIE Card Reader.
View 9 Replies
View Related
Jan 12, 2015
I have a HP ENVY 17-j070ca, and a few months ago my fingerprint reader stopped working. I have tried running the program multiple times, but it too refuses to launch. I have reinstalled all the drivers, and have used task manager to close out of everything that might cause the program to not launch.
View 1 Replies
View Related
May 13, 2010
I performed a windows 7 clean install on my vaio (VPCEB11FX).
After that i installed the drivers properly.In Device manager i am able to see the MMC card reader and SD reader with respective path letters.
But in when i open my computer only dvd drive showing there
View 6 Replies
View Related
May 9, 2013
My HP Pavilion dv6 SD card reader is not working after windows 8 upgrade (6 months ago). Previously it was working fine when I was using Win 7 (which is the default OS with this laptop). I cant find the device in Device manager (under System Device or Disk Drives).
View 6 Replies
View Related
Apr 19, 2014
I've a new Thinkpad W540 with Windows 7 64bit. I can't see the Card Reader in the device list. When I insert a SD Card, nothing happens. All I/Os are enabled in the Bios. What can I do?
View 3 Replies
View Related
Nov 23, 2014
For about a year, I've had an SDXC card in the built-in card reader of my Folio 13-1020us.
It's been working fine until a couple days ago. Then something I was downloading to it failed to complete, which is how I noticed that it had stopped working. Now, it doesn't appear in drives under My Computer, and it doesn't appear in Device Manager.
In an older HP laptop, I can at least see the card's drive letter and the name I gave it, so I think the card itself must be fine. But I can't see anything at all when I place it in the Folio.
I have a feeling the reader itself has just failed. I'm out of warranty by just a few months. Do I have to extend my warranty and send it in to get it fixed? I do not want to use an external reader because I use the card as extra storage space.
Operating system: Windows 7
SD card: PNY brand, 64GB SDXC
View 6 Replies
View Related
Dec 13, 2013
So I installed Windows 8 (Clean install, no upgrades) on the machine and since then the card reader isnt working. I downloaded and installed the drivers from Lenovo Website and after failing from Driver Genius and then from ThinkVantage System Update 5.03. Still doesn't work, I install them, but after I reboot it is installed but the card reader doesn't work (It was working before on Windows 7 on the same day I installed W8). I updated to 8.1 and the problem continues.
View 8 Replies
View Related
Feb 26, 2015
My card reader stopped working. I read somewhere that it could be burnt out. Is there a way of checking this and or replacing it?
View 5 Replies
View Related
Feb 19, 2014
I'm not able to use my finger print reader/simple pass now that I've downloaded windows 8.1 Been reading some of the other questions and difficulties people are having but haven't been able to still get it to work.
I have an HP Envy M6 1125dx
00179-60246-20486-AA0EM
64-bit Intel Core i5
Running Windows 8.1
View 4 Replies
View Related
Sep 27, 2014
i bought a new hp envy 15t-j100 (window's 8 64bit ). during installation of some program i installed another windows start menu (i thought it is windown 7 start menu for windows 8) but i discovered after that it is a windows 8 start menu for windows 7. this caused my computer to stop showing anything after starting up. i restarted it many times but nothing is showing on the screen except the mouse cursor .i don't have any backup recovery for my computer.
View 3 Replies
View Related
Apr 21, 2014
My hp envy can't detect the external monitor. I tried to re - install the graphic drivers (hd 4600 / Geforce 740m)...
It used to work and all of a sudden it stopped. My only assumption is that the HDMI output itself is not functioning.
View 2 Replies
View Related
Dec 4, 2014
Windows 8.1 Pro does not recognize Touchsmart. This work like a mouse when I click on the display. In properties of system, says that won't have a pen and touch.
»HP ENVY 15t-j100 Quad Edition CTO Notebook PC (ENERGY STAR) Product Number: F5G56AAR
View 2 Replies
View Related
May 29, 2012
I have a new HP ENVY TouchSmart 17T-J100. I do not see a num lock on or off indicator light. Prior computer keyboards have had such an indicator light. Is there one, or are we to figure out if num lock feature is on or off by trial and error?
View 6 Replies
View Related
Apr 25, 2013
I have a dell vostro 3350. On windows 7 the sd card and usb 2/esata port work as expected.
On windows 8 they dont. If i install the latest drivers, they work until i reboot the laptop after which they are back to not working.
Is this laptop just not Win8 compatible?
View 1 Replies
View Related
Jul 8, 2014
I have recently purchased an HP ENVY 15t-j100 Quad Edition CTO Notebook Windows 7 Professional (PC Product #: E1P05AV). I'll usually close the lid to put it into sleep mode when I have to do something else. But when I open it back up, it has the "Start windows normally or safe mode" sreen. I've noticed that this only happens after a certain amount of time of being in sleep mode. If I wake it up prior to that, it works just fine. I hope that this can be resolved since this is a brand new laptop.
View 9 Replies
View Related
Dec 9, 2011
why every day, all my sound arbitrarily go to just a series of just pops and clicks??????????
ENVY 17t-j100 Quad Edition CTO Notebook PC
View 1 Replies
View Related
Jul 21, 2014
yesterday I had a problem with my HP Envy 15t-j100 suddenly it became deadly slow!! a similar behavior after I reinstall windows 8.1 and in that time installing the Intel Management Engine Interface (MEI) Driver located in the drivers list for my laptop [URL].
Yesterday I reinstalled the driver again and that solve the problem, I was wondering is there is an update for this driver anywhere? I tried with HP Support Assistant and with Intel Driver Utility [URL]no luck so far.
View 3 Replies
View Related
Oct 14, 2014
when i hook up my second monitor useing the hdmi port and switch the monitor mode to extend the audio stops working. The volume mixer still shows audio movement but will not output the audio.
View 1 Replies
View Related
Feb 22, 2010
I have a brand new M4400, running W7pro x64. The M4400 came with an internal SD card reader. Now this card reader cannot read some standard SD cards (other work fine). Especially,
I have a Transcend SD 4GB 133x (http://www.bestpriceaudiovideo.com/i...ard-detail.jpg) that is problematic.
When I put the card in the reader, W7 tells me to format the card. This I do not want to do, of course. If I open Disk Management, it takes ages to open, and eventually shows the card as "Unallocated".
View 5 Replies
View Related
Nov 11, 2009
I bought a new 8935G and found that the card reader cannot read my 2GB H-Type xD card.
FDXGDFSGDFS
The camera I'm using it in does not show any problem.
GDFSGDFSG
I tried reinstalling reader driver.
GDSFGSF
I teste the reader with an old 16Mb xD card and this works.
FSGFSG
When I put the 2GB card in, Windows Vista says it has to be formatted; at this point the card is already unreadable in the camera and must be formatted againg there.
If I try to format on pc, the process stops at about 90% with an error.
View 7 Replies
View Related
Nov 11, 2009
I bought a new 8935G and found that the card reader cannot read my 2GB H-Type xD card.
GSDFGS
The camera I'm using it in does not show any problem.
GDFSGS
I tried reinstalling reader driver.
FGFSG
I teste the reader with an old 16Mb xD card and this works.
SFGF
When I put the 2GB card in, Windows Vista says it has to be formatted; at this point the card is already unreadable in the camera and must be formatted againg there.
If I try to format on pc, the process stops at about 90% with an error.
View 9 Replies
View Related
Oct 5, 2009
I recently restored my vaio TX750P/B using the built-in vaio recovery. However, my SD card slot doesn't seem to work anymore. The memory stick slot does work, and it shows up on my computer, but nothing for the SD slot.
I've tried reinstalling the drivers to no avail...
View 3 Replies
View Related
Mar 15, 2008
I recently saw that my M1710 has an card reader...
Can I use it for reading mijn debit/creadit cards for online banking,... or not?
View 9 Replies
View Related
Jan 17, 2009
I put in my SDHC card from my camera and it does not read or see the card.
I have Vista Premium 32bit.
Is there are weird firmware I have to get?
View 3 Replies
View Related
Oct 31, 2009
I am just thinking is SD Controler in E6400 is SDHC capable?
View 3 Replies
View Related
Apr 5, 2009
i have this laptop, great laptop, works great; however, the sd card reader has not worked in ages. I have tried upgrading to new drivers, reloading old drivers, etc etc....The driver company is ricoh.
View 5 Replies
View Related
