yesterday I had a problem with my HP Envy 15t-j100 suddenly it became deadly slow!! a similar behavior after I reinstall windows 8.1 and in that time installing the Intel Management Engine Interface (MEI) Driver located in the drivers list for my laptop [URL].
Yesterday I reinstalled the driver again and that solve the problem, I was wondering is there is an update for this driver anywhere? I tried with HP Support Assistant and with Intel Driver Utility [URL]no luck so far.
I have an HP ENVY 15t-j100 Quad Edition running Windows 7. Its card reader is not working. When I insert an SD card, I get a message that the device is not installed properly. Windows prompts me to update the driver, so I have let it, but it cannot find the driver. In the Device Manager, with the SD card inserted, it shows under "Other devices" a "Disk drive" with a yellow "!" symbol. The device status reads:
"The drivers for this device are not installed. (Code 28)
To find a driver for this device, click Update Driver."
I have tried to update the driver from there, but again no driver is reported to be found.
By the way, the Device Manager says that the Realtek PCIE CardReader is working properly. I have updated its driver using sp66065.exe, but there is no difference. The card reader is still not reading, nor is there a drive letter showing up for the inserted card.
If I disable the Realtek PCIE CardReader, then the "Other devices," "Disk drive" in the Device Manager goes away. But the card reader is not functioning all the same. If I enable the card reader, the same error returns with a yellow '!" under the "Other devices," "Disk drive" in the Device Manager,
i bought a new hp envy 15t-j100 (window's 8 64bit ). during installation of some program i installed another windows start menu (i thought it is windown 7 start menu for windows 8) but i discovered after that it is a windows 8 start menu for windows 7. this caused my computer to stop showing anything after starting up. i restarted it many times but nothing is showing on the screen except the mouse cursor .i don't have any backup recovery for my computer.
Windows 8.1 Pro does not recognize Touchsmart. This work like a mouse when I click on the display. In properties of system, says that won't have a pen and touch.
I have a new HP ENVY TouchSmart 17T-J100. I do not see a num lock on or off indicator light. Prior computer keyboards have had such an indicator light. Is there one, or are we to figure out if num lock feature is on or off by trial and error?
I have recently purchased an HP ENVY 15t-j100 Quad Edition CTO Notebook Windows 7 Professional (PC Product #: E1P05AV). I'll usually close the lid to put it into sleep mode when I have to do something else. But when I open it back up, it has the "Start windows normally or safe mode" sreen. I've noticed that this only happens after a certain amount of time of being in sleep mode. If I wake it up prior to that, it works just fine. I hope that this can be resolved since this is a brand new laptop.
I have a HP ENVY 17t-j100 Leap Motion QE CTO Notebook PC (ENERGY STAR) with optimus technology.Can I disconnect the optimus technology and only use the NVIDIA card?
I got my HP Envy dv7-7250us back in May 2013, and realized that the most recent version of its Intel HD Graphics 4000 driver software is 9.17.10.2857 from November 2012. Intel's official driver is now at version 15.31.3.64.3071 (9.17.10.3071) from March 2013. I am unable to install Intel's update though, because it detects HP's version of the driver and refuses to install a generic version. However, HP's current version is very dated, and I'm running into severe performance issues in many games.
Is it possible that HP could ever bring their Intel HD Graphics 4000 drivers up to date?
I have just reinstalled windows XP on a acer travelmate 4280 notebook and loaded all the drivers but still have 3 data interface devices still in the device manager and can't find any drivers for them.
when i hook up my second monitor useing the hdmi port and switch the monitor mode to extend the audio stops working. The volume mixer still shows audio movement but will not output the audio.
i have installed windows 8.1 on my hp 250 g3. and bluetooth not work and driver not show in computer management .........and wirless button not work ...
Recently I have had problem doing external monitor calibration under Win 8.1 64-bit. It turned out that that monitor did not show up in the "Device" pull-down menu in the Color Management. So I update the Intel HD graphic 400 driver. It didn't work. Then I uninstall the video driver and re-install from the scratch. Now I have found even the built-in monitor did not show up at the Color Management. Only printers show up in the Device pull-down menu.
I wonder if there other software or driver that I need to install? Or I have mseed up so One-touch Restore will be required?
I have since a few days my Power managment driver which doesn't recognize the battery any more.I have checked in the Windows Device Manager, which says: "Windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged. (Code 19)".Can it be related to a very recent Windows update I have made? (I'm on Windows 8.1)
I have an HP Envy dv7-7230us. I recently installed multiple HP updates deemed "critical" by their prompt. After installing and rebooting, I have no sound. If it is a clue, it also disconnected my WiFi.
I just killed my favorite laptop Envy4-1130us. I decided to update BIOS from v.13 to v.25 During update process, OS (Win8.1) hangt up. No errors was shown. After few hours laptop restarted, and now it's not works. Power led is on, system fan works on full load, but screen is black and system is not responding (OS doesn't start and power button not responding). Is an this laptop BIOS recovery console?
I've had a HP Envy 15 touchsmart laptop (Windows 8 originally, windows 8.1 now) for about 2 months now and haven't had any problems, till a few hours ago i attempted to update the bios of my laptop using the hp support assistant. After the restart, the pc would no longer start up and took me to a blue screen with the error message SYSTEM_THREAD_EXCEPTION_NOT_HANDLED. Everything I have done so far short of a refresh or reset has not worked and if i could I would like to avoid both as I do not have the bandwith to go download windows 8.1 again.
Have an HP Envy Touchsmart 15-j057cl. I am unable to update to Windows 8.1. I have done the following:
1. Installed all windows updates. 2. Gone to HP support page for machine and installed all driver updates. 3. Run Windows compatibility manager - no issues identified. 4. Removed preinstaled Norton. No virus software enabled. 5. Attempted update from Windows store. 6. Black screen.
Reverted to Windows 8. Windows reported various error messages across various attempts including:
0xc1900101 - 0x3000D
Then - 1. Disabled Ralink bluetooth and wifi drivers 2. Attempted windows 8.1 update from windows store 3. Black Screen
Reverted to windows 8
I've tried very hard to ensure I've gotten all of the latest drivers and BIOS, including chipset drivers. I have not installed any other software. I've also disabled any driver that I can afford not to have, yet the update continues to fail.
I have updtaed my windows as regular update but after that no sound from speakers. laptop is showing everything is fine and all sound drivers all working fine so whenever i clicked on scan for hardware changes in device manager menu then speakers starts working fine so every time i have to make that step to enable speaker., already i have uninstalled drivers and updated with default updater but same issue occurs in next boot...
A few days ago I updated from the Windows 8.1 evaluation to the full 8.1 release and since then my audio has not been working. In the control panel, "Digital Display Audio (AMD High Definition Audio Device)" is listed as unplugged. The audio icon on the taskbar is Xed out and clicking it runs the error finder in vain. Speakers no longer show up in the device listing although now that nothing is working I'm not sure if they ever did or if audio just came through Digital Display Audio. Headphones do not show up as playback devices and the volume controls on the keyboard and taskbar are inaccessible.
I have never used external speakers. The Windows 8.1 update seemed to wipe all of my HP and AMD software that came with the laptop so I reinstalled the HP Support Center and searched for driver updates and all that jive but everything shows as up to date. I don't know what else to look for as most of the forums I've seen seem to be talking about their HDMI out sound not working when plugged into a TV and I'm just trying to have sound, period.
HP ENVY m6 Notebook PC D1C68UA#ABA Windows 8.1 64-bitAMD A10-4600M APU with Radeon(tm) HD GraphicsAMD Radeon HD 7660GAMD High Definition Audio Device
I have all current drivers and software. It came with Windows 8 and I am trying to install 8.1. It does well until the restart. I do the restart and it gets part way through and the screen goes dark and hours later the screen is still dark. I press the power button and it says something like :Trying to recover install" and from there on nothing happens. I finally end up having to go back to windows 8.
My notebook restarted itself to make updates, once i logged on i found that the sound is not working on music files, web pages etc. other than the windows sound. The other thing i noticed is that the mute button will not go off or on? i tried to troubleshoot but nothing..I found that left clicking my sound icon and clicking on playback devices and then left clicking speakers and headphones and clicking 'Test' led to a pop up; "Device in Use.The device is being used by another application. any devices that are playing audio to this device and try again." I have checked everywhere but i can't find the device being used anywhere? I'm not willing to lose by Beats Audio.
Product name: HP ENVY m6 Notebook PC Product number: C2C18EA#ABU Windows 8 64-bit
I have the Envy 15 which came pre-installed with Win8. When the 8.1 update came out I installed and now can't get any audio when connecting via HDMI to my TV although image is there.
I've ensured all the drivers are updated AFAIK, but in the Device Manager I get the highlighted, obviously as above, the cable is plugged in.
All was working fine prior to the update and I have also used 4 different cables, which are all fine as I also have an old Compaq laptop which is still running Win8 allows audio via HDMI.
I have an HP Envy-m6 with switchable graphics, with the usual combination of an Intel HD 4000 and an AMD Radeon HD 7600M card.
When I had just bought the laptop and hadn't realised it had switchable graphics, I made the mistake of updating the drivers for one of these cards via the manufacturer's websites, causing it all to go haywire. I eventually managed to restore this, and was told that the only way in which you can update these drivers is via the driver software offerend on the HP website (or perhap using HP Support Assistant).
However, just today Windows Update indicated it had updates for both the AMD and Intel drivers. My question is simply this: can I update both drivers through Windows Update, or will this cause switchable graphics to break?
If I cannot use Windows Update to update these drivers, is HP going to release a combined driver package that incorporates these new drivers on the Support website at some point?
I can't update my hp envy dv6-7392ef from windows8 to windows8.1. The update goes to 90% then reboot and say to me that the update can't apply with the error: 0xC1900101-0x40017.
All my drivers are update. I have no strange software.
I am using an Envy TouchSmart 15 and I have just run an update of Windows 8.1 based on the system auto update (it ran 5 updates).
Prior to the update, I used a 27" monitor as the main screen and this was connected via the HDMI port. Right after the update, the system doesn't seem to recognise the HDMI port anymore and it goes back to using the Envy laptop screen as the main screen. I changed the HDMI cable but it made no difference. I subsequently connected another laptop to the 27" monitor via HDMI and it worked fine. So it appears both the monitor and the HDMI cable are fine.
I have a new Aspire 8935G with Vista 32 preinstalled.
Take audio drivers for example.
Acer update site reports Realtek audio driver version 6.0.1.5847 for my system.
If I switch to Seven 32, it reports 6.0.1.5915.
If I look for Aspire 8940G, Vista 32 (same audio hardware as mine), I see 6.0.1.5918, and, finally, 8940G Seven 32 has 6.0.1.5930.
They are all different from official Realteak drivers: they are at version 2.39 and lacks a control panel element (from Realtek...) that is present in the Acer divers, the one with the desk picture and the speakers around the room.
First question is: does Acer ever update drivers for different system or they just offer the drivers that were present in the retailed system?
Second: how comes the Realtek drivers lack the control panel component?
I've noticed when playing vidoes, the video frames update at a slower pace to the point where it feels that movie is being played in slow motion. Sometimes this conditions stays longer other for few minutes. It does not make any differene if I am streaming or playing a movie stored on the HD (machine doesn't have CD drive).
I've ensure there are no other apps running that might seep power away from main processor/RAM or video processor. All the drivers are latest & greatest and I don't see any warnings anywhere in the system manager.
It has Win 8 and Intel HD Graphics 4000 with 1.6G of video RAM which seems decent enough to play a video file smoothly.
im running a HP ENVY TouchSmart 15-j050ex Notebook PC, i recently updated my drivers after which my HP support assistant stops responding right after opening it.
