HP Pavilion 11 X2 Display :: After Upgrade To 8.1 HDMI Port Stop Working - Silverlight No Longer Working With DMS
Apr 20, 2014
After upgrade to 8.1 HDMI port didn't work. Followed instructions to correct BIOS and graphice driver; HDMI works - however Silverlight no longer working with DMS.
Get error 6036 in Silverlight which is Graphics device's driver certificate is invalid
Have checked graphics driver and is all up to date
Machine is HP Pavilion 11 x2
Graphics driver version 10.18.10.3366
brand new hp pavilion 17e135nr window 8.1 tv is brand new 50inch visio.i know the cable is good (new) because my ps 3 works just fine so i unplugged the ps3 and hooked to the laptop to play a movie i down loaded and i selected HDMI 2 where the cable is hooked to on my tv, i get no input on the tv. so i win p and selected duplicate screen and i get nothing, no error messages , the movie starts and plays just fine on the laptop but tv says no input.. i didn't try to select second screen only it should play on both screens, I dont think the HDMI port is working at all.
The port worked when i got the computer, its been two weeks now and when i plug in the hdmi cable into the port nothing happens. It doesnt show up on the tv and now im stumped,
i have HP 2000 notebook and all of a sudden HDMI port stopped working. Factory restore and a chipset driver worked and it started working. my bad, i installed a graphics driver, that took me back to sqaure one. HDMI port on the laptop is not working. HDMI cable and TV HDMI port is all working.i ran HP support assistant and it shows all required updates are in place. though it worked in between, it should be an issue with the chipset driver.
My HDMI port does not work. I have a N7010, 17R. I tried downloading other drivers but nothing seems to work. Is there a way to tell is it's a mother board issue or driver issue?
She has been using the HDMI port to connect an external monitor at home, but now it's not working anymore.
I tried to use different cable on different monitor, and they seem to have the same problem, it' displayed " no signal" and the laptop can't detect the display also.
I buy this wonderful notebook with win 8.1 , all works fine, but... the hdmi port seems is not working... nothing appens when i plug the hdmi cable... the tv doesn't recognize the pc... i don't think is a broken port, i think some driver or bios misconfiguration... My video card is the intel 400, i have latest updated driver..
[URL]
Really cannot i use hdmi ouput because bios doesn't support it?? in 2014?? i can't believe it..
I bought my lenovo G460 with nvidia M310 (with hdmi) this year and have not been able to get the hdmi port to work.
I have two lcd displays one in our lab and another one at home (LG 2361V-PF) which have hdmi connections in the back.
In the beginning I was able to get my notebook to work on the display in our office. However, now both displays (work+home) are not working.
I have tried to reinstall latest nvidia drivers as of 2010-11-02 (ver. 8.16.11.8990) from lenovo, completely restore Operating system and tried different hdmi cables.
I have even tried to use original drivers and also downgrade that to a lower version all with no luck.
I have even taken my LG LCD display to the LG After Service Warranty office and have found no issues wrong with the Monitor itself.
I am sure I have taken all the trouble-shooting methods into consideration so a simple question is... Is the hdmi port defective?
After I updated the BIOS to A09 of the Inspirion 7520 my USB keyboard stop working. All drivers is instaled and the windows recognize the keyboard and the num pad is on its happens with 2 keyboards and change the USB port don't works.
G60 laptop is working fine with all the latest driver updates...all windows updates... running windows 7, except that when i plug in the hdmi ..... to my toshiba tv... or any other tv for that matter.... the image of the desktop will not display on the tv.... yes its all hooked up right..... but what does happen is that the display adapter recognizes the tv... it will show it { TOSHIBA TV } on the drop down menu...
When the cable is connected... you hear the default windows " yes im connected" sound & when removing the cable... the default "disconnect" sound is heard....
So the pc is recognizing it....but still no image at all on the tv .... cant identify... I've tried 2 different cables & 3 different tv's.... all the same results.....
I upgraded my w520 from Win 7 to Win 8 last year with zero problems. Now I upgraded my W520 Win 8 to Win 8.1 via the store download. Except the webcam everything works fine.
In e.g. the Skype desktop application, Google Hangouts or the camera app, the built in webcam no longer works.
The green light turns on, but I just get the crossed out camra icon in e.g. the Skype video options. No video.
I see there are no drivers yet for Win 8.1 on the Lenovo support site for the w520 camera. In device manager it still shows the 2011 camera driver 1.1.0.1147 and says "This device is working properly."
But it does not work properly. How to get the camera to work or is it just a matter of waiting for a driver to be released eventually?
I tried uninstalling, reinstalling, camera is enabled in the Bios and permissions are set to give Skype and the camera app access to the camera. I also tried the W530 drives as was suggested elsewhere.
I bought HP pavilion 15 - N259TX with windows 8. today after installinf windows 7 ultimate my USB 3.0 port stopped worki g. I even downloaded the driver from hp site.
I am using an Envy TouchSmart 15 and I have just run an update of Windows 8.1 based on the system auto update (it ran 5 updates).
Prior to the update, I used a 27" monitor as the main screen and this was connected via the HDMI port. Right after the update, the system doesn't seem to recognise the HDMI port anymore and it goes back to using the Envy laptop screen as the main screen. I changed the HDMI cable but it made no difference. I subsequently connected another laptop to the 27" monitor via HDMI and it worked fine. So it appears both the monitor and the HDMI cable are fine.
The 2 USB port on the left hand side of my HP pavilion g6 not working after i formatted my system, it does not detect any devices plugged in these two ports, the operating system before was window 7 home premium but now it having window 7 professional, what can i do?
I am running Win 8.1 x64 (up-to-date) on HP Pavilion 1322TX laptop. There are Intel HD Graphics 3000 and ATM Radeon HD 7450M two graphic cards as the device manager window. Recently I am getting blue screens and later message appear saying the ATM driver stopped working. I found many problems with this driver in the past as well. When I check the relevent page for my laptop model, there is no update since 2012..
Can I update these two drivers seperately by getting updates from Intel and AMD sites?
Is there any update for catalyst control system (CCC) ?
When I try to update through the CCC or HP Support Assist, it is always no updates..
I just ordered an M4400 from the outlet, and in the Accessories page during the order there was no option to buy a DisplayPort to XXX Adapter for $15 like there is when you are buying a new one...
I figured it wouldn't be a big deal to find one after the fact, but now that I'm looking the only DisplayPort to HDMI Adapter Dell has to order is $59.99 !! Any ideas one where to get one closer to $15?
I got a HP laptop, running windows 7 x64 bit Ultimate, and has 8 GB of ram. My tv is crappy now, and want to play my ps3, so, i was wondering if i can plug into my Laptop and get a certain driver that makes the HDMI port act as a input so i can play through my laptop screen, my resolution can go a little over 720p .....
I'v gotten this laptop awhile back and i think this the first i've used bluray and it's not working. Updates are shown as updated. When I place the bluray disc in it states "Windows Media Player cannot play the DVD. The disc was created in a manner that the Player does not support." What do i need to do? I am still learning how to use my laptop.
I bought this computer which is running 7win64 to update my T60 which I use with my home TV, a samsung digital running at 1360x768 resolution. The computer's native resolution is 1920x1080. I bought an hdmi adapter for the displayport from lenovo when I ordered the computer. Initially, the display works and at first it ran long enough to get everything set for a nice crisp display that fits the screen perfectly. The sound is there too, and is passed on to my receiver by the TV. Very nice. But then it begins to blink off until it doesn't work at all (the sound is cut off too). Lately it won't stay on long enough to review settings.
All updates are in place, both from microsoft and from lenovo. This has Intel 4600 graphics built in, and intel has graphics drivers available, but won't install them because of the lenovo supplied drivers.
I can't get any support from lenovo support because another device is involved.
I read online of some early users who had this problem with a docking station and i guess the problem was resolved with an updated driver.
I purchased HP Pavilion 15-n209TX Laptop this year and the functions keys were working properly. But, later on from 10th of May 2014, they are not working! I checked whether there was a software due to which it was happening, but, I didn't install any kind of software which can harm the functioning of the keys. I am really struggling with very low brightness. The latest thing I did was - windows update - which installed the following softwares
Microsoft Silverlight
Also, I installed HP Quick fix.
Whenever I press F2 or F3, it just shows the slidebar (it doesn't go up and down though) and when I click on the top of the slidebar, nothing happens again. I also tried to go to the brightness option in the Windows Mobility Centre and tried to adjust the brightness - but nothing is happening.
Since my laptop (dv6 pavilion 7090el) had to be formatted to another copy of windows 7 (64bit), i can't manage to make hotkeys for brightness(f2-f3)/volume(f9-f10).
I tried to install/uninstall/install HP quick launch software (with all the system restarting combos possible) and the software doesn't really seem to be installed, since it only appears in the Control panel but not anywhere else.
The BIOS "action key" option in System configuration is already "enabled" ....
The brightness control keys (f2 & f3) on my pavilion dm4 stopped working all of a sudden. I'm operating windows 7 64bit. I've tried reverting to previous system restore points. I've also installed the BIOS, Intel chipset, and graphics drivers. All the other function keys are working properly, just can't change the brightness. Right now it's stuck on the brightest setting. I'm getting terrible eye strain from the screen.
