HP 3125 Display :: How To Make HDMI Output Port Act As Input
Jun 10, 2014
I got a HP laptop, running windows 7 x64 bit Ultimate, and has 8 GB of ram. My tv is crappy now, and want to play my ps3, so, i was wondering if i can plug into my Laptop and get a certain driver that makes the HDMI port act as a input so i can play through my laptop screen, my resolution can go a little over 720p .....
I have heard numerous comments stating that individuals are only getting Stereo Sound from their HDMI port but then other comments explaining that yes, indeed, it supports Dolby Digital....5.1 Audio etc.
The HDMI port is 1.2 which allows for a PCM 8 audio stream signal.
I have a receiver that allows for internal 7.1/5.1 Audio streams (all of the latest codecs can be decoded and processed) with HDMI output/input connections.
Will I be able to send a 5.1 PCM Audio stream to my AV Receiver and thereby utilizing the full range of audio?
I'm planning on buying a new laptop soon and have been going through some of the threads regarding the HDMI port and I am a bit confused.
I would like to be able to take a 1080p/5.1 BD or .mkv on my laptop and connect it to my AV receiver via HDMI which then outputs 1080p/5.1 to my HDTV/speakers. I have no idea what minimum video card/sound card/processor is required for this.
Yoga S1 output audio through the mini HDMI port? I see it listed as a possible output in "sound", but it just says "not connected". Not sure if it is my TV, my laptop, or the HDMI to mini HDMI cable I'm using.
I know there are users who have been able to get sound out of their E6400s over Displayport, but all the users i have heard from and read about this from have had integrated intel video. Are there any E6400 with nVidia quadro nvs160 users that have successfully gotten digital audio out through the displayport using a displayport --> HDMI cable?
I have a HP Notebook 2000, with Windows 8.1. At some point, the hdmi output to monitor stopped sending an audio signal. The video signal is fine.
It is labeled in Device Manager: 1-STD HDMI TV (AMD High Definition Audio)
The monitor and hdmi cable work fine with other computers. I have disabled/enabled the HDMI device, and also updated drivers (Windows says my drivers are up to date).
I am using an Envy TouchSmart 15 and I have just run an update of Windows 8.1 based on the system auto update (it ran 5 updates).
Prior to the update, I used a 27" monitor as the main screen and this was connected via the HDMI port. Right after the update, the system doesn't seem to recognise the HDMI port anymore and it goes back to using the Envy laptop screen as the main screen. I changed the HDMI cable but it made no difference. I subsequently connected another laptop to the 27" monitor via HDMI and it worked fine. So it appears both the monitor and the HDMI cable are fine.
Does the Helix's Mini Displayport support audio output?
Since this is not mentioned specifically on the Lenovo Specs Sheet, was wondering if any Helix owners have successfully connected the MDP to HDMI with clear audio?
I just ordered an M4400 from the outlet, and in the Accessories page during the order there was no option to buy a DisplayPort to XXX Adapter for $15 like there is when you are buying a new one...
I figured it wouldn't be a big deal to find one after the fact, but now that I'm looking the only DisplayPort to HDMI Adapter Dell has to order is $59.99 !! Any ideas one where to get one closer to $15?
I have a problem with hdmi output to my TV screen.
I have Y510P (i7-4700MQ CPU @ 2.40GHz, Intel(R) HD Graphics 4600
& NVIDIA GeForce GT 755M, Win 8.1 64-bit(6.3 build 9600), all with latest drivers )
My TV is Panasonic TH-L32B6. When I connect my laptop to TV it shows me awful picture quality and notification that “this is not optimal screen resolution for the primary display. The optimal res. Is 1280x720”. But with 1280x720 it’s still awful. It works fine just with 1024x768 res. I have no such a problem with my other TV LG 47LS570Y. How can i fix picture quality with higher resolution? I tried another OS like Ubuntu and a couple of hdmi cables…(see attachment)
I bought this computer which is running 7win64 to update my T60 which I use with my home TV, a samsung digital running at 1360x768 resolution. The computer's native resolution is 1920x1080. I bought an hdmi adapter for the displayport from lenovo when I ordered the computer. Initially, the display works and at first it ran long enough to get everything set for a nice crisp display that fits the screen perfectly. The sound is there too, and is passed on to my receiver by the TV. Very nice. But then it begins to blink off until it doesn't work at all (the sound is cut off too). Lately it won't stay on long enough to review settings.
All updates are in place, both from microsoft and from lenovo. This has Intel 4600 graphics built in, and intel has graphics drivers available, but won't install them because of the lenovo supplied drivers.
I can't get any support from lenovo support because another device is involved.
I read online of some early users who had this problem with a docking station and i guess the problem was resolved with an updated driver.
After upgrade to 8.1 HDMI port didn't work. Followed instructions to correct BIOS and graphice driver; HDMI works - however Silverlight no longer working with DMS.
Get error 6036 in Silverlight which is Graphics device's driver certificate is invalid
Have checked graphics driver and is all up to date
Machine is HP Pavilion 11 x2 Graphics driver version 10.18.10.3366
So ensuring i didnt get a defective device and while i'm still within my 14 day return period I was wondering if other people with the FW series (I have the 465J) version have a little give on the piece on the laptop where you plug it in to charge (top left of the laptop) and if you press it on the top part of it, it sorta pushes in a little bit. I also noticed its easily scratched as a I have a small scratch right where the the screen touches that part when closing the laptop (look at it from above as you slowly close your screen youll notice a little piece sticking out from the screen that can scratch the power input piece).
After rereading my own post I think people might confuse the power input to the power adapter, I'm referring to the place where you plugin your laptop located on the top left of the laptop near the hinge.
i came across the fact that you can only monitor audio if you install the sigmatel audio drivers with XP SP2 compatibility, but now that i wanted to plug my XPS via HDMI to my flatscreen, lo and behold... no HDMI audio as it used to be.
is it possible to have both scenarios or does one cancel the other?
i have a Acer Aspire 8920G and on the side there is an port with the name "HDMI" . If i plug a HDMI cable in from my Ps3 would my screen work as monitor ? so is the HDMI an input or (and) output
My HP HDX 16 is connected via HDMI cable to my receiver. It output's video to my HDTV but audio comes out of my laptop. I want the audio to come out of my home theatre system.
Ive been using a 40 inch HDTV ever since I received my Z about a month ago. I had to move recently, and now when i attempt to use the display it looks very strange, almost as if someone turned the digital vibrance or contrast setting up all the way. The text looks strange, and it is overall unpleasant to look at. I checked all of the settings and everything is the same as before, and tried varying the resolution and color settings. I can't figure it out!
I can take a picture if that would help explain better. I also checked the TV's settings and I do not believe that is the issue.
I also tried reinstalling the NVIDIA drivers from sonys website to no avail.
I have a Sony Vaio FW laptop with a HDMI output, when i had vista i could plugin my hdmi output in to my TV hdmi input and immediatly see my computer display on my TV. As soon as i upgraded to Win 7 Ultimate 64 bit, when i plugin the hdmi cable nothing happens, i am unable to get my tv and laptop to notice each other, Win 7 doesnt seem to notice at all.
I got Windows 7 ultimate installed on my laptop (did a clean install). I am trying to get output from my HDMI port to the TV but when I plug the cable in my laptop screen goes black and there is nothing showing on the tv.
HP G60-44OUS Notebook PC The original monitor or screen went bad and I am using a external monitor which has been working fine. Today I can not get input to the external screen. I hooked it up to my TV. It has work there fine. Today it will not imput to that screen either. The start button light is white and the wi-fi button is orange, suppose to be blue. There are 3 activity lights.
The first (left) is on bright all time, which I think is normal. The middle light is dim. The right is off. As I can not see a display I am at a loss. Is there a key stroke for restart? It appears that the laptop is not starting. Repeated pushing the start button does not seem to work.
I have a studio xps 16 and whenever I plug it via HDMI to my tv (which has a 1080p resolution) there are black bars all around the image, meaning the image is smaller than the tv. I've set the resolution of the tv (from Catalyst Control Center) to 1920x1080 and it still won't do full screen...