Acer :: 6935a-when The Battery Is Used (power Save Scheme Is On)
Sep 8, 2009
I have Acer 6935 (P8400, GF9600 512 DDR3, 4 GB RAM DDR3) and use Vista 64 bit.
Today I have noticed a strange behavior of my laptop when the battery is used (power save scheme is on).
On the beginning, the battery is fully charged. I start listening music or watching a movie, it does not matter. It takes about 1 hour, for example.
The battery is about 50-60% full (1h 30 min left) and suddenly the laptop goes to standby. When I turn it on, turns out that only 9% of the battery left. The wireless and the Bluetooth are off. I use Vista 64 bit.
The laptop is only 6 months and the battery has not been hard used.
View 6 Replies
ADVERTISEMENT
Aug 18, 2009
as you all may have heard, when your laptop is idle the hdd makes a clicking sound . that means that it is parking its head/s to save power. the thing is that this will make it brake faster. wd hdds have like 300 000 cycles .
How do you turn this feature off?
View 6 Replies
View Related
Apr 2, 2009
This is an issue that's only been going on for a couple of days, as far as I can tell.
Lately, whenever I boot up my Studio 1535 into Vista, it starts off in Power Save mode by default.
Ever since I got this thing and reinstalled Windows, I've had it use High Performance mode by default, and just edited the profile power settings to those of Power Saver when it's on battery.
Once Windows starts, I can go into power options and set it to run High Performance mode again, but it's annoying having to do that at every boot now. It just doesn't save my setting anymore
View 4 Replies
View Related
Jan 27, 2012
I just received my new Dell UltraSharp u2412m monitor!Now I try to connect my Dell XPS15 laptop (via its mini displayport connection) to my new monitor via a mini displayport to displayport cable.Sadly it doesnt seem to connect and the monitor instantly goes into Power Save Mode..the monitor instantly works with an old laptop via vga connection...Plug and play...
View 8 Replies
View Related
Dec 31, 2008
i like having my m1530 on my lap (unplugged) in the living room while i watch tv/babysit so far i can only make it last 2 hours at the most(surfing the web,messengers) with the brightness 30% and powersaver mode.
well i was reading on the thread on how to underclock your cpu...theres a problem with that:
-numero first im too lazy (hurts my head when i try to understand the thread,hence the "[ADVANCE]" on the title ^^")
-numero dos having a t5450 on power saver mode (50% max perfomance) is slow enough... so i tried to look for a better solution and found this...
[url]
i think its great...my battery up to 2 hours and 20-ish minutes.
i think vista users should give it a try
View 10 Replies
View Related
Jan 21, 2013
I want to turn Wi-Fi and Bluetooth to save the battery but I can't find the way to do it. There is no button or smth like this. How to do it?
View 5 Replies
View Related
Apr 20, 2014
Acer 5253 - Will not power on, battery or on AC power. Have tried all the suggested solutions but none have worked. Is it possible to get maintenace instructions (disassembly, where certain items are located, etc)?
View 9 Replies
View Related
Nov 1, 2009
this message pops up sometimes during Firefox:
(translation)
---------------------------------------------------
following program has performed an action which means that the color scheme must be temporarily changed to Windows Vista Basic
Program: Firefox
Publisher: Mozilla Corporation
Process-ID: 2592
View 6 Replies
View Related
Oct 2, 2008
I recently had a small flood in my basement. While my laptop didnt get wet the power adapter did. It stopped working as there was water dripping out of the adapter. I purchased a IGO adapter from Radio Shack. I tried it in the store on my laptop and it worked fine. I got it home and it was a different story. The unit kept turning itself on and off and i kept having to jiggle it to work. Finally I decided to return the adapter and buy another one. I purchased a 90 watt adapter from Best Buy. Now the machine doesnt do anything. Nothing happens, no blue light or anything.
View 7 Replies
View Related
Apr 21, 2010
I have an Aspire 5720. The default mode for the eAuido Management is Movie (which means surround on). When I turn the computer on, I change that value to Music (surround off). However, there is no way to save my preferred mode (Music), and everytime, I have to bother with changing it from Movie to Music.
Is there a way to make "Music" the default mode of the eAudio Management?
View 15 Replies
View Related
Jan 27, 2015
I have a ES1-512 laptop bought that is showing a battery problem. It will run on mains power without problem however if mains power is removed it shuts down immediately. Also in the task bar the battery indicator is showing 74% available (plugged in, not charging).
View 3 Replies
View Related
Dec 14, 2008
I just bought used Aspire 3680 laptop, I was told it only had harddrive problem,
however It have few more problems.
1. it won't save bios settings.
2. it won't always boot sometime it takes 3-4 tries before it will boot.
3. when it finally boot it will randomly freeze after 2-10 minutes.
I try new harddrive, reset the memory, unplug the battery.
memtest shows the memory is fine.
View 7 Replies
View Related
Sep 21, 2009
known issue with FF -- unsure about other browsers -- Sometimes, I just want to take a peek at a PDF, not have it sitting on my desktop.
How can I keep Firefox from saving every download no matter what I specify?
View 6 Replies
View Related
Dec 25, 2014
I have a Gateway NE71B a friend gave me and it has Windows 8 installed. I had to do some repair to it after a drink was spilled into it but I cleaned it out and its been fine, sorta...
Resuming from sleep doesn't work. It is just black. I have to shutit down and that works fine. It appears that a BIOS upgrade is needed and I downloaded the latest BIOS and tried to update it. It uses some 'InsideH2O' update app. Well it goes to reboot and when it tries to apply the BIOS, it keeps saying that it is an invalid firmware image. I've verifiedd that this is the correct BIOS file. I tried other BIOS versions and none will apply, always getting the error. I've researched the utility, extracted the config and BIOS. I'm tempted to tell it to write without verify (its that fustrating).
One option, that seems to saved most people is to disable Secure Boot. No matter what, I cannot do this. It never saves. I followed the official steps of powering off, then power on, set the admin password, disable Secure Boot, save and exit. Secure Boot always stays enabled. I've tried probably 30 times, 10 different ways and it just won't stick. I also noticed that I cannot change other settings in the BIOS. I can set some to a different value but they always revert back. I cannot get the function keys setting to stay on Function Keys. It always defaults back to Special Keys after reboot. Same thing goes with enabling F12 for boot menu.
I've tried removing the coin battery, which has a charge, shorting out the contacts holding it for about a minute, removed power battery and power cable, letting it sit but still no good. I've also tried removing the hard drive. Where is the BIOS data being stored and can it be wiped?
I've been considering getting an Acer laptop but this is starting to steer me away. Definately not getting a Gateway.
View 2 Replies
View Related
Sep 9, 2009
I am running Windows 7 RC1 on the 3810t, and have been experiencing some weird issues.
I am hoping that someone in the NotebookReview community has already struggled with these problems and can help me resolve them.
The first issue concerns the laptop screen. When on battery power, it seems to fluctuate in brightness and contrast without my express permission. I have looked around in video card and power settings, as I thought that maybe this was a "feature" to save battery power or something, but have been unable to find anything.
Secondly, the computer sometimes goes to sleep long before the time delay for inactivity has passed. The last straw came yesterday, when I continually struggled with waking my compy up, and then having it go to sleep three or four seconds later, over and over again. I won when i yanked the battery out. Except that I wanted to use the computer, so I guess the computer won...
Anyways, I think that this machine is great. The battery life is amazing, and it runs quickly and smoothly (I have the 3810t-6775 with an SSD --the performance of the SSD is incredible). Hopefully someone can help me with these minor (read: major) issues so that I can transcend into computing bliss.
View 10 Replies
View Related
Nov 12, 2014
I bought an ACER ultrathin S7 392 about 7 months ago and for the last month it has been shutting down unexpectedly when on battery but not when plugged into the mains. There is no shutdown routine, crash or error message it just loses all power. A second issue which may or may not be related is that sometimes when i attempt to shutdown the unit it restarts instead. I have sent it back to ACER support to fix but I think they just reinstalled windows and when they sent it back they had not fixed the problem. I have since contacted them again and they said it was fine when it left the workshop.
Acer S7 392
Bios 2.09
Windows 8.1
View 3 Replies
View Related
Mar 9, 2015
I have an Acer Aspire V3-572PG (about 4 months old), and the machine shuts down randomly when on battery power. It's happened when moving it from one place to another, or with subtle shifts on my lap, and sometimes just typing triggers a shutdown. However, it doesn't happen when plugged in. Battery has been fully charged; it's not overheating; it's not the fan; it's not dust; and I've run comprehensive anti-virus scans.
In the past, it's taken anywhere from an hour or two before it shuts down. Last night it happened simply when I unplugged the thing from the wall ... so, no moving/no touching of the computer, but shutdown when removing plug from wall!!???
View 3 Replies
View Related
Jan 2, 2015
After pressing the power button the battery light flashes about 6 times then goes out. No light on for power.
View 3 Replies
View Related
Nov 20, 2014
The computer is in dead state the next morning after I switched its Windows power plan to high performance. In order to unlock power plan options, I disabled connected standby via a registry key in HKLMSystemControlSet001ControlPowerCsEnabled to 0.
After investigating, I read that this computer doesn't support normal hibernate wake-up process other than connected standby. I select shut down option in the menu (hibernate option disappeared). It's possible that shut down option in the menu was actually set to sleep/hibernate in power settings by default.
The battery was at 100% before I last turned it off.
The LED power indicator doesn't light on when power supply is connected on either DC or microUsb.
View 5 Replies
View Related
Aug 2, 2007
When I pull the power cord to switch to battery power while in Windows my lcd goes to black. The only way I get my video back is a hard reset and reboot. Later on I tried this and everything was back to normal. Why is this happening? Is this some weird standby?
Dell Inspiron 1505 Bios A-14
View 12 Replies
View Related
Nov 14, 2014
My battery on my acer draws power at times when my laptop is plugged in it will work ok then the on and off button will start to blink It will go into hibernation when plugged in when the battery gets to low....
View 1 Replies
View Related
Apr 14, 2008
i was always looking for a good solution to create an ISO of your hard drive.
this way, after a clean xp & drivers istall, you can save this image to a usb-hdd/usb-stick/CDs/DVDs/etc. and everytime your system needs to be reinstalled (virus, slowdowns, registry messed up, ...) you can save yourself the endless installation/sp2 download/driver search and simply play back the clean windows in about 1 hour.
there is commercial software like trueimage, which does that. and norton ghost, which i hate, as i hate symantec software and this tool is not really good.
and there is a freeware tool, which is named "driveimage xml".
very simple to use and it works great:
[url]
you simply click "back up", choose the path to the destination you want and wait
a few minutes.
when pushing big files and not choosing the option "split large files", remember, that
your destination harddisk has to be formated with ntfs, as you can't push files bigger
than 4 GB to fat32 formated drives at once.
the only thing you have to do is create a boot cd with an operating system on it,
so you can restore your image to the system hdd.
i used the freeware bart pe to do this:
[url]
you only have to transform your xp cd with it to become an operating system
cd. and insert the plugin for driveimage xml (available on the runtime.org homepage), so you can run driveimage xml when booting from cd.
View 10 Replies
View Related
Feb 21, 2009
Where does Quicktime for Windows save its configuration file? I need to manually change the config file in order to solve a problem with Merriam Webster Visual Dictionary that has a problem with the audio. If you don't use Windows but know the name of the file.
View 6 Replies
View Related
Oct 13, 2014
I have an Aspire 6930 that suddenly died and will not power on. The LED power button was dark and unresponsive. I performed a power reset and the blue light on the power button came back on until I pressed the button to try to restart the laptop. When I did that, the blue LED immediately went dark and stayed that way until I did another power reset. It never gets to the point of anything powering on. Is it a problem with the battery or it the laptop toast?
This is a real bummer since I just replaced the hard drive a few weeks ago and replaced Windows Vista with Linux Mint (which btw is blazing fast compared to Vista).
View 1 Replies
View Related
Jul 30, 2009
By default, the brightness setting on my dell xps m1530 is set to max on AC. I prefer to set it 3 at pushes of the down button.
But I whenever restart or when the screen turns off automatically after inactivity, it just resets back into the full brightness. Is there anyway to make it 'remember' the brightness that I set it to?
View 3 Replies
View Related
May 21, 2009
I am using Sony Vaio SZ. My operating system crashed, When I start my computer, it shows the following message. error: loading operating system. I know I can format and reinstall factory settings if I click F10 at startup. But I first want to save my files. Can I start MS DOS than copy files to external drive or is there any other way?I have all my files in that laptop.
View 6 Replies
View Related
Oct 18, 2009
I recently purchased a Dell B120 used in ebay. Laptop worked great on AC adapter, but battery showed 1% on battery indicator and would not work. I ordered a non-dell replacement from a company on ebay. Battery came in and had 94% when installed. Just to check I unplugged AC adapter.
Laptop seems to work properly for the few seconds I checked. I then replaced AC adapter cord and allowed battery to charge overnight. Next morning I powered up laptop and checked battery power.
Laptop showed 100%, so I pulled AC adapter plug. Boom, nothing, no power. I have tried everything to get this battery to work. Bios sees battery and shows no battery when removed.
Bios we upgraded to latest dell upgrade A08. Battery info in bios says battery performing normal. shows 100% but no power .....
View 3 Replies
View Related
Oct 29, 2009
I've had a strange people recently plaguing my D630 (purchased June 2008).
The battery states 100%, pull the plug, and within a minute, it goes to about 10%, then the laptop shuts down.
Now, here's the catch - the battery is still good. I've tried the battery out in my other D630 and it works perfect, still holding a charge. I also tried the other laptop's battery in the problem laptop and it did the same thing.
View 7 Replies
View Related
Nov 25, 2014
Inspiron14Z (5423) mid 2012.
Dropped computer during move,lost all the disks and paperwork.Hard drive was damaged so purchased new one locally..Downloaded ISO win 7 86,installed used original validation.It booted up all fine but no drivers for mouse or Ethernet or wifi actually no drivers.Mouse works.
How can I download the drivers and save them to CD/DVD and install on machine.
View 7 Replies
View Related
Jul 13, 2014
I have a zbook with a nvidia quadro 610m graphics. I cannot get the gpu to save settings or engage when playing games. It was working until I tried to give windows 8 a try.I did a fresh install of windows 8. Then I installed the hp drivers cd that came with workstation. Everything says it completed successfully and I've rebooted multiple times.
When I open the nvidia control panel, none of the settings I change stick. E.g. tell every program to use the 610m. I click apply it looks like it was successful. However, if I open the nvidia control panel again, all changes are reverted. I restarted after hitting apply too. It doesnt matter what the changes are, they all revert.
I'm guessing I screwed up with the driver install or something but IDK.The device manager says that the 610m is working properly and the driver is up do date.
View 1 Replies
View Related
