Acer Aspire 7535-5020 :: Will Not Boot / Black Screen
Nov 22, 2014
I have an Acer 7535-5020 that will not boot up. A few times prior to this happening it said that Windows was not shut down properly - this was right after a batch of Windows updates was installed.Now, it will not start at all. I have tried pressing every F button in hopes of it catching the Bios - we had noticed a few times that it was not set to start from the hard drive and changed it but for some reason it was not holding the changes, we think.I have googled and found that many Acer's (different models) seem to run into this problem and for many, it seems that something called flashing the Bios takes care of the issue. I would like to know which Aspire 7535 model BIOS I need to use as well. I think there are 2 different models listed.
When powering up I get the Acer screen for about 10 sec and then black screen. Immediately before this there was a Windows update for the graphics card, if I remember correctly. I have tried hard power down 3 times but on the 4th time I do not get the message "preparing for automatic repair". I am unable to get into Safe Mode.
I've now spent many hours of research and troubleshooting to try to fix this issue, both via external sites through google search and here on Acer site.
It is the same issue reported many times: Acer 5552g laptop powers on, but does not boot up -I get blank / black screen, fan sound briefly, then idle, and that's the end of. Also, when I do manage to get it going (booting), it seems a totally random event...
My Acer Aspire One 10.1 notebook wont boot. All I get is a black screen with microsoft corporation written under neith a rectangle, where a green bar sliding from left to right should appear, but doesn't. What do I need to do?
I have reinstalled win7 on my c drive using another computer. The hard drive booted on that computer. Which leads me to believe some thing is missing.
I had exactly the same problem with my Acer Aspire 5552G with win7, I tried all things that was online e.g. New battery, Flashing bios, Fn + esc without battery when trying to start the computer and so on.
It started now and then and worked perfect but when I shut it down again it could take me up to 50 tries to get it started.
The problem was issues with the boot sector on the hard drive!
Finally I made an Win7 repair disc and started from.
I also checked for errors on the hard drive and it repaired some sectors before starting windows.
After that it works like when it was new. The computer was bought January 2011.
I recently ordered an Aspire 7535-5020 with an Athlon 64 X2 cpu in it and when looking for more information about it I stumbled upon another forum where some people were talking about Windows 7 reporting that the cpu was actually a Turion. Anyone know anything about this?
Even looking at Acer's website it says this model has an Athlon 64 X2 Dual-Core in it. Would this be a Windows bug reporting the wrong thing, or the actual hardware is built using different components than what is marketed and sold?
I would like to hear others thoughts before I actually open the box when it gets here.
I recently bought an acer aspire 7535 - 5415. Specifications can be found here:
It came preinstalled with Windows 7 but I formatted it and installed Windows XP for which drivers are available on acer's website.
Now I am having problems finding drivers for the wireless device and ethernet on it. I have tried the various drivers available online including acer's website but none of them seem to work so I think I am doing something wrong. I just run the installer for the drivers but that doesnt make any difference. Currently in device manager, two devices show up with a question mark along them: 1. Ethernet Controller 2. Network Controller
Installing different drivers makes no difference, including the ones posted on acer's website. So I dont know if I am doing something wrong or if the drivers are faulty. Can someone point me to the proper drivers or the proper procedure for installing the network controllers I need.
I have a little problem with my Acer E1-570.Yesterday I turned it completely off for the first time (I have been using sleep mode before), and when I tried to turn it on again, nothing happens.Power led is on, and HDD led flashes once, but after that it does nothing.I can hear fan spinning for few seconds but after that it's complete silence inside the computer.
Laptop still under warranty. I recently had a motherboard and HDD replacement. I wanted to install Windows myself, but the BIOS was set to UEFI, and I couldn't seem to boot off of a USB drive. So I switched it to Legacy, booted from the pendrive, and installed Windows just fine.
For whatever reason, I went back to try and change the setting to UEFI. Now the laptop switches on, but refuses to boot. I get a black screen, with no logo or any prompt whatsoever to access the BIOS.
I read a bit and seems I need to remove the BIOS battery, let the memory clear itself to reset BIOS settings to default, and try again? If it matters, I re-installed Windows 7 64-bit.
I recently had a motherboard and HDD replacement. I wanted to install Windows myself, but the BIOS was set to UEFI, and I couldn't seem to boot off of a USB drive. So I switched it to Legacy, booted from the pendrive, and installed Windows just fine.
I went back to try and change the setting to UEFI. Now the laptop switches on, but refuses to boot. I get a black screen, with no logo or any prompt whatsoever to access the BIOS.
I read a bit and seems I need to remove the BIOS battery, let the memory clear itself to reset BIOS settings to default, and try again? I re-installed Windows 7 64-bit.
My problem is that when i start up my Laptop (its about a week old) i just get a black screen and nothing else. The only way of solving this problem is to take out the power lead and the battery and start it up again. I dont want to have to do this everytime i start up my laptop.
This first happened after my laptop crashed (Frozen screen bussing through speakers) there was a lot running at the time, virus updates, windows updates etc.
just got my replacment 1810tz. last book had some trouble with the keyboard. now the brand new just wont boot up. has some fan blowing and once harddisc access and then nothing. i already tried Fn + F5/F6 keys, no result. also attached via hdmi to monitor - but not any flickering. even let it lay there for some hours wiithout batterypack attached. no result.
how to remove the bios battery, maybe this could solve it...?
My aspire s3 screen suddenly goes black. When I connect it to HDMI I can see the display on the HDMI device. When I disconnect HDMI the screen display comes back but again goes black after some time. It is a hardware problem or some settings to be done. This display problem happens when I restart or power on the note book.
My acer aspire v5 is on black screen. This happened when i forced it to shutdown while a disk check up is on progress, coz it stuck up for about an hour it didn't even move an inch. my function keys are not working.
I have Windows Vista Home Premium preinstalled (with no installation nor recovery disks delivered).
I accidently hit the arcade button on the cinedash panel, instead of the power button. The computer started directly up into arcade deluxe, after a short install. Nice feature
I thought, and choose to exit arcade through the exit feature. Then I noticed that the computer prepared to hibernate, but instead it shut off after it finished.
After turning the computer on, a small complaint about improper closing the computer popped up, and I choose to start windows normally. Now the boot loader ran, and when I expected the logon screen, instead I met a black screen with a working mouse cursor. I eventually had to force power down, since crtl alt delete didn't work.
Since then, all boot options, safe mode etc leads to the same black screen.
Vista looks like it's going to boot normally then goes to a black screen with a working mouse pointer. The hard disk light just pulses every couple seconds.
I tried extracting the battery but it doesn't work.
I tried to alt+f10 - Vista Recovery page, so it gives me menu called "Edit Boot Options". There is the path to winload.exe and this: "Partition: 2 Hard Disk: b8f0ffa4
[ /NOEXECUTE=OPTIN ]" That's all what I have when I press ALT + F10.
I could type "Enter" = nothing happened "Esc" = shutdown the system "F8" = go to recovery page.
Goes to a "Vista system recovery" or something like that, i'm not quite sure what its name was. Anyway it had about 6 options, including "Get windows to check for and correct the faults on your disk" in a little bit more high tech talk. And "Restore to a earlier point". Since the "Checking and correct faults" said it was recommended, i thought i'd go for that.
It ran its tool, told me to click the restart button. Runs it again, tells me to restart again.
And now it enters its final state - Its virtually dead :|. If i turn it on, it will go to the black screen, that talks about an improper shutdown, with the options for Safe Mode, Safe mode with networking.. etc. Any of these 4 options all result in the same black screen displaying only the mouse cursor.
I was not trying to install or upgrade nothing, was not trying to change form vista to xp or so.
I have not deleted any hidden partition (as far as I know...)
I know I have read several posts about this issue but Cntl+shift+Esc not solving issue. Notebook with black screen upon startup. I hear Windows 7 booting up but have a black screen. Was troubleshooting a monitor issue again when black screen happened.
Purchased in 2009 with free upgrade to Win 8.1 Pro. Has been a great computer up to now. On power up, LED's and fan come on but screen is black. Can not see anything behind screen when shining a torch on it. Has worked twice since fault appeared, once on re-boot and once when pressing DEL key. Replaced battery on motherboard and tried combinations of the two RAM boards. Still not working. Have recovery disks, but they are for the old Vista software.
I have a relatively new Aspire E1-522. Was in the middle of watching Netflix when it conked out. Now, when I turn the power on very little happens...the blue light comes on, the fan comes on and the screen backlight comes on...and then goes out...and then comes on again...etc.
Basically, turning it on doesn't even get to the Acer logo. Cannot get into the BIOS by any means. In my research this sounds exactly like the Aspire One black screen of death, although I haven't found references to it with respect to the E1.
I think the BIOS is fried. How to re-flash it on the E1-522? I cannot boot windows, so I can't use the self-extracting EXE. I need to be able to flash it from the bare bones hardware like the fix for the AA1 ....
I have repaired a few laptop in my time so when a friend said his screen was black but he could read it with a flashlight I guessed right away it was an inverter problem.
I got a new inverter off of *bay, carefully removed the display bezel, swapped in the new inverter and powered it up. Successfully boots into Windows ! Shut it down, screwed the inverter down, put the bezel back on and now the display comes on for 1 second, just long enough to see that "Acer" splash screen, and then goes black. Yes you can still read the screen with a flashlight.
Checked the power in and out wires, they look good. Re-seated both connectors. unscrewed the inverter board from the display so that it is :floating". Nothing. Swapped in the old inverter and it acts the same ?
I have an acer 7513 wsmi the screen went black no backlight. It worked using the blue video cable connected to a TV. I replaced with a new screen now have a backlight but no images etc. still works with TV though. I up put windows 7 on it so it has no acer drivers at all. I have tried alt 5 etc but no joy.
I have an Acer Aspire One D250 of 2009 that does not work anymore .. Pressing the power button the computer turns on, the cpu fan starts then stops (as usual) but then nothing happen .. black screen, no error beep, hd stopped, no lights turned on ... I tried to remove ram, hd, battery .. nothing. I decides to change the motherboard and I found one identical new sealed. After installation..same problem !!
So my Acer Aspire e5 571 which ive been using for about 3 days just had a windows update. Now it starts up fine but I get a black screen once I log in. However some programs are still able to see and popup randomly. I also tried going into my bIOS but it asks for a password which I do not know.
I have an Acer Aspire 5517 that was turning itself off and few weeks ago, which I wrote to the community about. It stays on now, but the screen is black. I was able to update the BIOS before it went black permanently. It does turn on, but nothing comes up on the screen..How do I trouble shoot it, when I can't see anything???